FCC ID: QISRRN3301 eRelay Remote Node

eRelay3.0 RRN3301 Product Description Issue Date V1.0 2012-10-20 HUAWEI TECHNOLOGIES CO., LTD. Copyright Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:

http://www.huawei.com Email:

support@huawei.com Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. i eRelay 3.0 RRN3301 Product Description Contents 1 Product Positioning ............................................................................................................... 1 1.1 Positioning ........................................................................................................................................... 1 1.2 Benefits ................................................................................................................................................ 2 2 Product Architecture ............................................................................................................ 4 2.1 Overview .............................................................................................................................................. 4 2.2 Exterior ................................................................................................................................................ 4 2.3 Ports ..................................................................................................................................................... 5 3 Application Scenarios ........................................................................................................... 6 4 OM .......................................................................................................................................... 8 4.1 Overview .............................................................................................................................................. 8 4.2 OM Structure........................................................................................................................................ 8 5 Specifications ....................................................................................................................... 10 5.1 Capacity Specifications ...................................................................................................................... 10 5.2 Device-Related Specifications ........................................................................................................... 10 5.3 Reliability Specifications ................................................................................................................... 11 Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. ii eRelay 3.0 RRN3301 Product Description 1 Product Positioning eRelay is a wireless transport networking solution, used on the higher band of TDD spectrum (<6GHz). As a network element (NE) in the eRelay system, eRelay remote node(RRN) works together with eRelay BS to perform wireless backhaul. 1.1 Positioning With the expansion of mobile broadband users (MBB), network capacity is insufficient in some outdoor hot spot areas, affecting user experience. Operators use compact devices such as AP, Micro, and Pico eNodeBs to cover hot spots. In the preceding scenarios, if access devices for fixed networks, such as optical fibers, are used for backhaul, deployment costs are high and fixed network resources are difficult to obtain. Therefore, wireless backhaul is required to solve the problem. As a wireless backhaul solution, eRelay adopts TDD technologies and provides high throughput with short delay. Compared with backhaul in fixed networks, deployment costs for eRelay are low and frequency resources are accessible. Compared with micro waves, eRelay has advantages in transmission in non line of sight (NLOS) scenarios. In the eRelay solution, the eRelay RRN provides wireless backhaul channels for Served Equipments such as Macro, Micro, Pico, video surveillance, AP and fixed network equipment. RRN access eRelay BS through air interfaces. RRN3301 is one of the Huawei eRelay module. Figure 1-1 shows an eRelay RRN3301. Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 1 Figure 1-1 eRelay RRN3301 eRelay 3.0 RRN3301 Product Description 1.2 Benefits Larger Capacity and Throughput with Flexible Transmit Power A single eRelay RRN3301 can be connected to a maximum of two Served Equipments. A single eRelay RRN3301 supports the maximum uplink and downlink rate of 28 Mbit/s and 80Mbit/s, respectively. Optimized Transmission Mode with Low Costs eRelay RRN3301 support layer 2 switching. Flexible Installation for Fast Network Deployment with Low CAPEX The eRelay RRN3301 has a highly integrated structure with a small size and light weight, facilitating installation and maintenance and reducing the capital expenditure (CAPEX). eRelay RRN3301 can be mounted onto a pole, and equipment rooms are not required. eRelay RRN3301 can be flexibly installed on different places and Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 2 require small space. Therefore, sites are easily obtained, network deployment flexibility is enhanced, and site lease costs are reduced. eRelay 3.0 RRN3301 Product Description Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 3 eRelay 3.0 RRN3301 Product Description 2 Product Architecture 2.1 Overview An eRelay RRN3301 consists of a modem, and panel antenna. Figure 2-1 shows the eRelay RRN3301 architecture. Figure 2-1 eRelay RRN3301 architecture Modules in eRelay RRN3301 have following functions:

The modem enables the connection between the RRN and eRelay BS over air interfaces. The panel antenna provides directional transmission and receipt of LTE signals with high gains. The specifications are as follows:

Gain: 171 dBi for 3.5G. Horizontal 3dB beamwidth: 40 Vertical3 dB beamwidth: 20 2.2 Exterior Figure 2-2 shows the eRelay RRN3301 exterior. Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 4 Figure 2-2 eRelay RRN3301 exterior eRelay 3.0 RRN3301 Product Description 2.3 Ports The eRelay RRN3301 provides ports on its bottom panel and indicator panel, as described in Table 2-1. Table 2-1 Ports on the eRelay RRN3301 Module Port Num ber Connector Description Bottom panel PoE/FE0 1 RJ45 DBG FE1

/

1 1

/

Indicator panel Power over Ethernet

(PoE) or service Ethernet port 1 Combined virtual commissioning serial and Ethernet port USB RJ45 Service Ethernet port 2

/

PWR, FE1, FE2, RUN, and SIG indicators Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 5 eRelay 3.0 RRN3301 Product Description 3 Application Scenarios Working together with auxiliary devices, eRelay RRN3301 can be installed indoors and outdoors based on operator requirements. An eRelay RRN3301 can be mounted onto a pole or on the wall, as shown in Figure 3-1 and Figure 3-2. Figure 3-1 eRelay RRN3301 mounted onto the pole Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 6 Figure 3-2 eRelay RRN3301 installed on the wall eRelay 3.0 RRN3301 Product Description Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 7 eRelay 3.0 RRN3301 Product Description 4 OM 4.1 Overview The eRelay RRN3301 will be managed as a board of BS by operation and maintenance system. 4.2 OM Structure Figure 4-1 shows the operation and maintenance system of the eRelay RRN3301. Figure 4-1 OM system of the eRelay RRN3301 The OM system consists of the LMT and the M2000. The LMT is used to maintain a single eRelay RRN3301. To maintain the eRelay RRN3301 remotely, connect the LMT to the eRelay RRN3301 through the Internet Protocol (IP) network. The M2000, a mobile element management system provided by Huawei, is used to remotely maintain multiple eRelay RRN3301s of different types or software versions. The OM system provides the following functions:

The LMT performs functions such as data configuration, alarm monitoring, commissioning, and software upgrade. Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 8 eRelay 3.0 RRN3301 Product Description The M2000 performs functions such as data configuration, alarm monitoring, performance monitoring, and software upgrade. Both the LMT and the M2000 support MML and GUI modes. Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 9 eRelay 3.0 RRN3301 Product Description 5 Specifications eRelay RRN3301 specifications include capacity specifications, device-related specifications, and reliability specifications. 5.1 Capacity Specifications Table 5-1 describes the capacity specifications for an eRelay RRN3301. Table 5-1 Capacity specifications for an eRelay RRN3301 Item Specifications Maximum throughput of a single eRelay RRN Downlink throughput: 80 Mbit/s Uplink throughput: 28 Mbit/s Maximum number of Served Equipments connected to a single eRelay RRN 2 5.2 Device-Related Specifications Table 5-2 describes the device specifications for an eRelay RRN3301. Table 5-2 Device specifications for an eRelay RRN3301 Item Specifications eRelay RRN3301 Mode TDD Frequency band RX band

(MHz) TX band

(MHz) Bandwidth

(MHz) 3.5GHz Band 43 3650MHz

-3675MH z 3650MHz

-3675MH z 10M/20M Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 10 eRelay 3.0 RRN3301 Product Description Table 5-3 describes mechanical and electrical specifications for an eRelay RRN3301. Table 5-3 Mechanical and electrical specifications for an eRelay RRN3301 Item Specifications Dimensions (H x W x D) 200 mm 340 mm 60 mm Weight 3.5 kg Power supply PoE input: -48 V DC, 0.6 A Table 5-4 describes the specifications for ports on the eRelay RRN3301. Table 5-4 Specifications for ports on the eRelay RRN3301 Item Specifications Transmission ports Two fast Ethernet (FE) electrical ports, one of which supports PoE power input. Maintenance port One DBG port Table 5-5 describes the environment and clock specifications for an eRelay RRN3301. Table 5-5 Environment and clock specifications for an eRelay RRN3301 Item Specifications Operating temperature Relative humidity 40C to +50C 5% RH to 95% RH Protection class IP65 5.3 Reliability Specifications Reliability specifications include system availability, mean time between failures

(MTBF), mean time to repair (MTTR), and system restarting time. Table 5-6 describes the reliability for an eRelay RRN3301. Table 5-6 Reliability specifications for an eRelay RRN3301 Item Specifications System availability 99.999%

System restarting time(soft-reset) 60s Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 11 eRelay 3.0 RRN3301 Product Description Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 12 eRelay 3.0 RRN3301 Product Description A Acronyms and Abbreviations C CAPEX D DHCP F FE I IP L L M MBB MTBF MTTR N NE O O&M capital expenditure Dynamic Host Configuration Protocol fast Ethernet Internet Protocol Long Term Evolution mobile broadband mean time between failures mean time to repair network element operation and maintenance Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 13 eRelay 3.0 RRN3301 Product Description P PoE R RRN T TDD power over Ethernet eRelay Remote Node time division duplex Huawei Proprietary and Confidential Copyright Huawei Technologies Co.,Ltd. 14 Regulatory Compliance Statement RRN3301 Issue Date 0168 02 2014-5-8 HUAWEI TECHNOLOGIES CO., LTD. Copyright Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:

http://www.huawei.com Email:

support@huawei.com Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. i 1 Regulatory Compliance Statement 1 Regulatory Compliance Statement About This Chapter 1.1 Declaration of Conformity to European Directives Declaration of Conformity to European Directives Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 1-1 1 Regulatory Compliance Statement Figure 1-1 Declaration of Conformity to European Directives 1-2 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue (02) 2 Regulatory Compliance Information 2 Regulatory Compliance Information About This Chapter 2.1 Regulatory Compliance Standards 2.2 European Regulatory Compliance 2.3 U.S.A Regulatory Compliance 2.4 Japanese Regulatory Compliance 2.5 CISPR 22 Compliance 2.1 Regulatory Compliance Standards The Product complies with the standards listed in Table 2-1. Table 2-1 Regulatory compliance standards Discipline EMC Standards

CISPR22 Class B

CISPR24

EN55022 Class B

EN50024

ETSI EN 301 489 Class B

CFR 47 FCC Part 15 Class B

FCC Part 90z

RSS-192

RSS-197

RSS-102

ICES 003 Class B

AS/NZS CISPR22 Class B

GB9254 Class B

VCCI Class B

CNS 13438 Class B

IEC/EN 61000-6-1

IEC/EN 61000-6-3 Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 2-3 2 Regulatory Compliance Information Discipline Safety RF Health Standards

IEC 60950-1

IEC/EN60215

IEC/EN41003

EN 60950-1

UL 60950-1

UL 60950-22

CSA C22.2 No 60950-1

AS/NZS 60950.1

BS EN 60950-1

IS 13252

GB4943

GB8898

ETSI EN 301 908-1

ETSI EN 301 908-13

ICNIRP Guideline

1999-519-EC

EN 50385

OET Bulletin 65

IEEE Std C95.1

EN 60215 Environmental protection 2002/95/EC & 2011/65/EU (RoHS)

EC NO. 1907/2006 (REACH)

2002/96/EC&2012/19/EU(WEEE) Grounding

ITU-T K.27

ETSI EN 300 253 2-4 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue (02) 2 Regulatory Compliance Information Standards Discipline Note:

EMC: electromagnetic compatibility NEBS: Network Equipment Build Standard RF: radio frequency CISPR: International Special Committee on Radio Interference EN: European Standard ETSI: European Telecommunications Standards Institute CFR: Code of Federal Regulations FCC: Federal Communication Commission IEC: International Electrotechnical Commission AS/NZS: Australian/New Zealand Standard VCCI: Voluntary Control Council for Interference CNS: Chinese National Standard UL: Underwriters Laboratories CSA: Canadian Standards Association BS: British Standard IS: Indian Standard GR: general requirement FDA: Food and Drug Administration BTS: base transceiver station GSM: Global System for Mobile communications WLAN: wireless local area network ICNIRP: International Commission on Non-Ionizing Radiation Protection OET: Office of Engineering Technology IEEE: Institute of Electrical and Electronics Engineers RoHS: restriction of the use of certain hazardous substances 2.2 European Regulatory Compliance The Product complies with the following European directives and regulations.

2004/108/EC (EMC) 2006/95/EC (low voltage) 1999/5/EC (R&TTE) 2002/95/EC & 2011/65/EU (RoHS) EC NO. 1907/2006 (REACH) 2002/96/EC&2012/19/EU (WEEE) The Product complies with Directive 2002/95/EC, 2011/65/EU and other similar regulations from the countries outside the European Union, on the RoHS in electrical and electronic Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 2-5 2 Regulatory Compliance Information equipment. The device does not contain lead, mercury, cadmium, and hexavalent chromium and brominated flame retardants (Polybrominated Biphenyls (PBB) or Polybrominated Diphenyl Ethers (PBDE)) except for those exempted applications allowed by RoHS directive for technical reasons. Product complies with Regulation EC NO. 1907/2006 (REACH) and other similar regulations from the countries outside the European Union. Huawei will notify to the European Chemical Agency (ECHA) or the customer when necessary and regulation requires. Product complies with Directive 2002/96/EC&2012/19/EU on waste electrical and electronic equipment (WEEE). Huawei is responsible for recycling its end-of-life devices, and please contact Huawei local service center when recycling is required. Huawei strictly complies with the EU Waste Electrical and Electronic Equipment Directive (WEEE Directive) and electronic waste management regulations enacted by different countries worldwide. In addition, Huawei has established a system for recycling and reuse of electronic wastes, and it can provide service of dismantling and recycling for WEEE. By Huawei recycling system, the waste can be handled environmentally and the resource can be recycled and reused fully, which is also Huawei WEEE stratagem in the word. Most of the materials in product are recyclable, and our packaging is designed to be recycled and should be handled in accordance with your local recycling policies. In accordance with Article 11(2) in Directive 2002/96/EC&2012/19/EU (WEEE), products were marked with the following symbol: a cross-out wheeled waste bin with a bar beneath as below:

2.3 U.S.A Regulatory Compliance 2.3.1 FCC Part 15 2.3.1 FCC Part 15 The Product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device does not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. 2-6 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue (02) 2 Regulatory Compliance Information If this device is modified without authorization from Huawei, the device may no longer comply with FCC requirements for Class B digital devices. In that a case, your right to use the device may be limited by FCC regulations. Moreover, you may be required to correct any interference to radio or television communications at your own expense. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and radiates radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user may take one or more of the following measures:

Reorient or relocate the receiving antenna.

Reinforce the separation between the device and receiver.

Connect the device into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio or TV technician for assistance. 2.4 Japanese Regulatory Compliance 2.4.1 VCCI The Product complies with VCCI Class B by Information Technology Equipment (ITE). The preceding translates as follows:

This is a Class B product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI).If this product is used Near a radio or television receiver in a domestic environment. It may cause radio Interference.Install and use the equipment according to the instruction manual. Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 2-7 2 Regulatory Compliance Information 2.5 CISPR 22 Compliance The Product complies with CISPR 22 for Class B by the ITE. 2.6 China RoHS hazardous substance table This product described in this guide complies with the Chinese RoHS Frame Alloy Parts Power Adapter Metal Fittings PCBA Capacitor Other electronics Screen Solder Cable Plastic and Polymer Label Battery 2-8 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue (02) 2 Regulatory Compliance Information 2.7 India RoHS hazardous substance table The Product described in this guide complies with the Chinese RoHS Part Descriptions Restricted Substances in Product Cd Pb Hg Cr(VI) PBBs PBDEs Frame Alloy Parts Power Adapter Metal Fittings PCBA Capacitor Other electronics Screen Solder Cable Plastic and Polymer Label Battery 2.8 Other Markets Issue (02) For relevant compliance information/documentation for markets not mentioned above, please contact Huawei representative Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 2-9 Compliance and Safety Manual RRN3301 Issue Date 02 2014-5-8 HUAWEI TECHNOLOGIES CO., LTD. Copyright Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:

Website:

Email:

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China http://www.huawei.com support@huawei.com Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. i 1 Safety 1 Safety About This Chapter 1.1 Health and Safety 1.2 Equipment Safety 1.3 Electromagnetic Field Exposure 1.1 Health and Safety 1.1.1 Overview 1.1.2 Electrical Safety 1.1.3 Inflammable Environment 1.1.4 Radiation 1.1.5 Working at Heights 1.1.6 Mechanical Safety 1.1.7 Bundling Signal Cables 1.1.1 Overview Introduction This section describes the safety precautions you must take before installing or maintaining Huawei equipment.

To ensure safety of humans and the equipment, pay attention to the safety symbols on the equipment and all the safety instructions in this document. The "NOTE", "CAUTION", and "WARNING" marks in other documents do not represent all the safety instructions. They are only supplements to the safety instructions. Installation and maintenance personnel must understand basic safety precautions to avoid hazards.

When operating Huawei equipment, in addition to following the general precautions in this document, follow the specific safety instructions given by Huawei. Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 1-1 1 Safety

Only trained and qualified personnel are allowed to install, operate, and maintain Huawei

equipment. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Local Safety Regulations When operating Huawei equipment, you must follow the local laws and regulations. The safety instructions in this document are only supplements to the local laws and regulations. General Requirements To minimize risk of personal injury and damage to equipment, read and follow all the precautions in this document before performing any installation or maintenance. Ensure that the instructions provided in this document are followed completely. This section also provides guidelines for selecting the measuring and testing devices. Installation Ground

The device (or system) must be installed in an access-controlled location. Tighten the thumbscrews by using a tool after initial installation and subsequent access to the panel.

Do not damage the ground conductor or operate the device in the absence of a properly installed ground conductor. Conduct the electrical inspection carefully. The device (or system) must be connected permanently to the protection ground before an operation. The cross-sectional area of the protective ground conductor must be at least 6 mm2. The device must be fixed securely on the floor or other reliable objects, such as the walls and the mounting racks before operation.

When installing the unit, always make the ground connection first and disconnect it last Power Supply

For DC-supplied model: The device applies to DC power source that complies with the Safety Extra-Low Voltage (SELV) requirements in IEC 60950-1 based safety standards. Prepared conductors are connected to the terminal block, and only the appropriate AWG/Type of wire is secured with the lug terminals. This device relies on the buildings installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 80 VDC, 25A for DC supplied model is used on the phase conductors (all current-carrying conductors). For this device, a readily accessible disconnect device shall be incorporated external to the equipment 1-2 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue (02)

To minimize the risk of fire, use only No. 26 AWG or larger telecommunication line cord. 1 Safety Human Safety

Do not operate the device or cables during lightning strikes.

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telecommunication network voltage (TNV) circuits.

Move or lift the chassis by holding its lower edge. Do not hold the handles on certain modules such as power supply, fans, and boards because they cannot support the weight of the device.

Do not look into the optical port without eye protection.

Do not wear jewelry or watches when you operate the device.

Reinforced insulation or double insulation must be provided to isolate DC source from AC mains supply.

Only qualified professional personnel are allowed to install, configure, operate, and disassemble the device.

Only the personnel authenticated or authorized by Huawei are allowed to replace or change the device of the parts of the device (including the software).

Any fault or error that might cause safety problems must be reported immediately to a supervisor. Operator

Only qualified personnel are allowed to remove or disable the safety facilities and to troubleshoot and maintain the device. Ensure that the instructions provided in this document are followed completely. The document also provides guidelines in selecting the measuring and testing device.

1.1.2 Electrical Safety High Voltage The high voltage power supply provides power for the device operation. Direct or indirect contact (through damp objects) with high voltage and AC mains supply may result in fatal danger.

During the installation of the AC power supply facility, follow the local safety regulations. The personnel who install the AC facility must be qualified to perform high voltage and AC operations.

Do not wear conductive articles, such as watches, hand chains, bracelets, and rings during the operation.

When water is found in the rack or the rack is damp, switch off the power supply immediately.

When the operation is performed in a damp environment, make sure that the device is dry. Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 1-3 1 Safety Non-standard and improper high voltage operations may result in fire and electric shock. Therefore, you must abide by the local rules and regulations when bridging and wiring AC cables. Only qualified personnel are allowed to perform high voltage and AC operations. Before powering on a device, ground the device. Otherwise, personal injury or device damage may be caused by high leakage current. Thunderstorm Do not perform any operation, including high voltage and AC operations, on a steel tower or mast during a thunderstorm. Tools Dedicated tools must be used during high voltage and AC operations. Avoid using ordinary tools. High Electrical Leakage Ground the device before powering it on. Otherwise, personal injury or device damage may be caused by high leakage current. If a "high electrical leakage" tag is present on the power terminal of the device, you must ground the device before powering it on. Power Cable 1-4 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue (02) 1 Safety Do not install or remove power cables when the device is on. Transient contact between the core of the power cable and the conductor may generate electric arcs or sparks, which may cause fire or hurt human eyes.

Before installing or removing the power cable, turn off the power switch.

Before connecting a power cable, check that the label on the power cable is correct.

If the device is connected with the DC power supply, use 0.75 mm or 18 AWG minimum power supply cord.

Use type H03VV-F or light PVC-sheathed flexible cord according to IEC 60227. 1.1.3 Inflammable Environment Operating the electrical device in an inflammable environment can be fatal. Do not place the device in an environment that has inflammable and explosive air or gas. Do not perform any operation in this environment. 1.1.4 Radiation Electromagnetic Field Exposure Radio-frequency signals with high intensity are harmful to human body. Before installing or maintaining an antenna on a steel tower or a mast with a large number of transmitter antennas, coordinate with the parties concerned to shut down the transmitter antennas. When handling optical fibers, do not stand close to or look at the optical fiber outlet directly with unprotected eyes. Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 1-5 1 Safety General Laser Information Laser transceivers or transmitters are used in optical transmission systems and associated test tools. The wavelength of the laser is between 780 nm and 1600 nm. The laser transmitted through optical fibers has very high power density and is invisible to human eyes. A beam of light causes damage to the retina. Laser of wavelengths used in telecommunications causes thermal damage to the retina. Lasers used in lightwave systems have a larger beam divergence, typically 10 to 20 degrees. Looking at an un-terminated fiber or damaged fiber with unprotected eyes at a distance greater than 150 mm (6 inches) does not cause eye injury. Eye injury, however, may be caused if an optical tool such as a microscope, magnifying glass, or eye loupe is used to view the energized fiber end. A lightwave system in normal operating mode is totally enclosed and presents no risk of eye injury. The automatic laser shutdown (ALS) feature of the lightwave system also ensures safety. The ALS, however, can be applied to bi-directional transmission only. If the receiver side does not detect the laser from the transmitter side, it sends the transmitter side a signal. Upon receiving the signal, the ALS shuts down the laser emission within 100 ms. Safety Guidelines Follow the following guidelines to avoid laser radiation:

Read the instructions before installing, operating, and maintaining the device. Ignoring the instructions can cause exposure to dangerous laser radiation.

Wear a pair of eye-protective glasses when you are handling lasers or fibers.

Only qualified personnel are allowed to perform laser-related operations.

Make sure that the optical source is switched off before disconnecting optical fiber connectors.

Before opening the front door of an optical transmission system, make sure that you are not exposed to laser radiation.

Do not look at the end of an exposed fiber or an open connector when you are not sure whether the optical source is switched off or not.

Use an optical power meter to check that the optical source is switched off and verify that it is off by measuring the optical power.

Do not use an optical tool such as a microscope, a magnifying glass, or an eye loupe to view the optical connector or fiber. Handling Fibers Read the instructions before handling fibers:

Only trained and qualified personnel can cut or splice fibers.

Before cutting or splicing a fiber, ensure that the fiber is disconnected from the optical source. After disconnecting the fiber, use protecting caps to protect all the optical connectors. 1.1.5 Working at Heights 1-6 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue (02) 1 Safety Avoid object falling when you work at heights. When working at heights, fulfill the following requirements:

Only trained personnel can work at heights.

Prevent the devices and tools that you carry from falling down. Take safety and protection measures, for example, wear a helm and safety belt.

Wear warm clothes when working at heights in a cold region.

Before working at heights, check that all the lifting facilities are in good condition. Hoisting Heavy Objects Do not walk below the cantilever or hoisted objects when heavy objects are being hoisted.

Only trained and qualified personnel can perform hoisting operations.

Before hoisting heavy objects, check that the hoisting tools are complete and in good condition.

Before hoisting heavy objects, ensure that the hoisting tools are fixed to a secure object or wall with good weight capacity. Issue orders with short and explicit words to avoid misoperations. Ensure that the angle formed by two cables is not larger than 90 degrees. See Figure 1-1.

Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 1-7 1 Safety Figure 1-1 Hoisting heavy objects Using Ladders Checking a Ladder

Before using a ladder, check whether the ladder is damaged. Only the ladder in good condition can be used.

Before using a ladder, you should know the maximum weight capacity of the ladder. Avoid overweighing the ladder. Placing a Ladder The recommended gradient of ladders is 75 degrees. You can measure the gradient of the ladder with an angle square or your arms. When using a ladder, ensure that the wider feet of the ladder are downward, or take protection measures for the ladder feet to prevent the ladder from sliding. Ensure that the ladder is placed securely. Climbing Up a Ladder When climbing up a ladder, note the following:

Ensure that the center of gravity of your body does not deviate from the edges of the two long sides. To minimize the risk of falling, hold your balance on the ladder before any operation. 1-8 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue (02) 1 Safety

Do not climb higher than the fourth rung of the ladder (counted from up to down).

If you want to climb up a roof, ensure that the ladder top is at least one meter higher than the roof. 1.1.6 Mechanical Safety Drilling Holes Do not drill the cabinet at will. Drilling holes without complying with the requirements affects the electromagnetic shielding performance of the cabinet and damages the cables inside the cabinet. In addition, if the scraps caused by drilling enter the cabinet, the printed circuit boards (PCBs) may be short circuited.

Before you drill a hole in the cabinet, wear insulated gloves and remove the internal cables from the cabinet.

Wear an eye protector when drilling holes. This is to prevent your eyes from being injured by the splashing metal scraps. Ensure that the scraps caused by drilling do not enter the cabinet.

Drilling holes without complying with the requirements affects the electromagnetic shielding performance of the cabinet.

After drilling, clean the metal scraps immediately. Sharp Objects Before you hold or carry a device, wear protective gloves to avoid getting injured by sharp edges of the device. Lifting Heavy Objects When heavy objects are being lifted, do not stand or walk under the cantilever or the lifted object. 1.1.7 Bundling Signal Cables Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 1-9 1 Safety

Do not bundle signal cables with high current cables or high voltage cables.

Maintain a minimum space of 150 mm between adjacent ties. 1.2 Equipment Safety 1.2.1 Electricity Safety 1.2.2 Electrostatic Discharge 1.2.3 Installing and Removing a Board 1.2.4 Laying Cables 1.2.1 Electricity Safety Thunderstorm During thunderstorms, the electromagnetic field generated in the thunderstorm area may damage the electronic parts. To prevent damage to the device during lightning, ground the device properly. High Electrical Leakage If the "high electrical leakage" tag is present on the power terminal of the device, you must ground the device before powering it on. Fuse If a fuse is to be replaced, the new fuse must be of the same type and specifications. 1-10 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue (02) 1.2.2 Electrostatic Discharge 1 Safety The static electricity generated by human bodies may damage the electrostatic-sensitive components on boards, for example, the large-scale integrated (LSI) circuits. Human body movement, friction between human bodies and clothes, friction between shoes and floors, or handling of plastic articles causes static electromagnetic fields on human bodies. These static electromagnetic fields cannot be eliminated until the static is discharged. To prevent electrostatic-sensitive components from being damaged by the static on human bodies, you must wear a well-grounded ESD wrist strap when touching the device or handling boards or application-specific integrated circuits (ASICs). Figure 1-2 shows how to wear an ESD wrist strap. Figure 1-2 Wearing an ESD wrist strap 1.2.3 Installing and Removing a Board When installing a board, use proper force to prevent the pins on the backplane from being leaned. When installing or removing a board, note the following:

Insert the board along the guide rails. Prevent the surface of a board from contacting the surface of another board. This is to prevent the boards from being short-circuited or scratched. Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 1-11 1 Safety

To prevent electrostatic-sensitive devices from being damaged by the ESD, do not touch the circuits, components, connectors, or connection slots on boards. 1.2.4 Laying Cables When the temperature is very low, violent strike or vibration may damage the cable sheathing. To ensure safety, comply with the following requirements:

Cables can be laid or installed only when the temperature is higher than 0 .

Before laying cables which have been stored in a temperature lower than 0

, move the cables to an environment of the ambient temperature and store them at the ambient temperature for at least 24 hours.

Handle cables with caution, especially at a low temperature. Do not drop the cables directly from the vehicle. 1.3 Electromagnetic Field Exposure Introduction The Base Transceiver Station (BTS) emits Radio Frequency (RF) radiation. Follow the local safety regulations when installing and operating the BTS to avoid radiation hazard. Guidelines on Limiting Exposure to Electromagnetic Fields There are a number of international regulations, standards, and guidelines for exposure to electromagnetic fields. Some European countries have adopted the recommendation of the council of the European Union (1999/519/EC), released on July 12, 1999, focusing on the hazards of exposure to electromagnetic fields. The recommendation is based on the guideline published by the International Commission on Non-Ionizing Radiation Protection (ICNIRP). Location of Base Station Antennas Base station antennas, the source of the radiation, are usually mounted:

On freestanding towers, with a height up to 30 m

On a tower on the top of buildings

To the side of buildings, on rare occasions Generally, the antenna cannot be located in a position lower than 10 m. The energy usually forms a horizontal main beam and is slightly tilted downwards. The remaining energy forms into weaker beams on both sides of the main beam. The main beam, however, does not reach the ground if the antenna is around 50200 m away from the ground. The highest level of emission would be expected in close vicinity of the antenna and in line of sight to the antenna. Exclusion Zones The requirements for exclusion zones are as follows:

The antenna should be properly located to prevent the public from accessing the area where the RF radiation exceeds the previously mentioned limits. 1-12 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue (02)

If areas with excessive RF radiation are accessible to the operation and maintenance

(O&M) personnel, ensure that they know the source of radiation and can power off or shut down the transmitters before entering high radiation areas. In addition, such areas must be confined within a distance of 10 m from the antennas. Each exclusion zone should be defined by a physical barrier and by a recognizable sign warning the public or O&M personnel. 1 Safety Guidelines on Choosing Antenna Sites The guidelines on choosing the antenna sites are as follows:

For roof-mounted antennas, raise the antennas above the height of the personnel who may have to work on the rooftop. For roof-mounted antennas, keep the transmitter antennas away from the areas accessible to the public, such as roof access points, telephone service points, and HVAC devices. For roof-mounted directional antennas, place the antennas near the periphery, and do not make the antennas face the building.

Consider the trade-off between large aperture antennas (lower maximum RF) and small aperture antennas (lower visual impact).

Keep higher-power antennas away from accessible areas.

Keep the antennas in a site that is far away from urban areas, though this may contradict the coverage area requirements. Exercise extra caution when designing co-location sites, that is, antennas owned by different companies are located in the same site or are co-sited. This applies particularly to sites that include high-power broadcast (FM/TV) antennas. Local zone often favors co-location, but co-location may cause safety problems. Take special precautions for antenna sites near hospital and schools.

Location of BTS The product is shielded from RF radiation hazards. The device has been tested to comply with the radioactive spurious emission requirements of international standards or local regulations. Therefore, the BTS under normal operating conditions does not cause danger to the public and O&M engineers. However, the limits for RF radiation might be exceeded due to faulty antenna cables or for other causes.

BTS sites shall not be accessible to the public. Only authorized and trained personnel can access BTS sites or equipment rooms.

A sign of excessive RF radiation must be present on the doors of the sites or equipment rooms to warn the personnel inside the site or equipment room of excessive RF radiation.

BTS sites must be regularly monitored and inspected after installation. Prediction of the Exposure to Electromagnetic Fields This section provides a theoretical approach to calculate possible exposure to electromagnetic radiation around a BTS antenna. Precise statements are possible either with measurements or complex calculations considering the complexity of the environment, such as soil conditions, nearby buildings and other obstacles. The complexity may cause reflection, deflection, and scattering of electromagnetic fields. The maximum output power (given in EIRP) of a product is usually limited by license conditions of the network operator. Issue (02) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 1-13 1 Safety A rough estimation of the expected exposure in power flux density on a given point can be made with the following equation:

S = (P(W) x Gnumeric)/(4 x r(m) x ) Where, P = Maximum output power at antenna port of the BTS in W Gnumeric = Numeric gain (see below) r = Distance between the antenna and the point of exposure in meters For the calculation of the Gnumeric, Gnumeric = 10GdB/10 GdB = Gantenna(dB) Bcable(dB) Bvertical-attenutation(dB) Bhorizontal-attenuation(dB) B = attenuation in dB FCC Radiation Exposure Statement To comply with FCC RF exposure requirements in section 1.1307, a minimum separation distance of 20 cm is required between the antenna and all public persons. 1-14 Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. Issue (02)