FCC ID: QISMU509-65 HSDPA Module

by: Huawei Technologies Co.,Ltd latest update: 2016-02-11 model: MU509-65

Two grants have been issued under this FCC ID on 02/11/2016 (this is one of three hundred and ninety releases in 2016 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked troubleshooting guides, password defaults, drivers, warrantee terms, & instructions.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies			exhibits	applications
		manuals

all exhibits 13
1 ~ 2016-02-11 11
2 ~ 2016-02-11 9

app s				submitted / available
1 2	UserManual	Users Manual	pdf	387.21 KiB	November 02 2016
1 2	UserManual Safety	Users Manual	pdf	125.97 KiB	November 02 2016
1 2		Cover Letter(s)	pdf		November 02 2016
1 2		Cover Letter(s)	pdf		November 02 2016
1 2		External Photos	pdf		November 02 2016
1 2		Internal Photos	pdf		November 02 2016
1 2		ID Label/Location Info	pdf		November 02 2016
1 2		RF Exposure Info	pdf		November 02 2016
1 2		Test Report	pdf		November 02 2016
1 2		Test Report	pdf		November 02 2016
1 2		Test Setup Photos	pdf		November 02 2016
1 2		Test Report	pdf		November 02 2016
1 2		Test Setup Photos	pdf		November 02 2016

exhibit
download
text

1 2

UserManual

Users Manual

pdf

387.21 KiB

November 02 2016

Copyright Huawei Technologies Co., Ltd. 2015. All rights reserved. All rights re se rved. No part of this manual may be reproduced or transmitted in any f orm or by any means without prior written consent of Huawei Technologi es Co., Ltd. and its affiliates ("Huawei"). The prod uct described in this manual may include copy righted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decry pt, extract, rev erse engineer, lease, assign, or sublicense the said sof tware, unless such restrictions are prohibited by applicable laws or such actions are approv ed by respectiv e copy right holders. Trade marks and Pe rmissions

, and Technolo gies Co., Ltd. are trademarks or registered trademarks of Huawei Other trademarks, product, serv ice and company names mentioned may be the property of their respectiv e owners. Notice Some f eatures of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and theref ore may not be activ ated or may be limited by local network operators or network serv ice prov iders. Thus, the descriptions herein may not exactly match the product or its accessories which y ou purchase. Huawei reserv es the right to change or modify any inf ormation or specif ications contained in this manual without prior notice and without any liability. DISCLAIMER ALL CONTENTS OF THIS MANUAL ARE PROVIDED AS IS. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTA BILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MA XIMU M E XTENT PERMI TTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAG ES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABL E OR NOT. THE MA XI MUM LIABILITY (THIS LIMITATION SHALL NOT AP PLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT A PPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE A MOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and be responsible to obtain all necessary gov ernmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Contents Getting to Know the MU509-65 ................................................................................ 1 Dimension ..........................................................................................................................................................1 Position of RF Connectors..........................................................................................................................3 Pin Def initions ..................................................................................................................................................4 i Thank you for purchasing HUAWEI MU509-65 WCDMA Module (hereinafter referred to as the MU509-65) Note:

This manual brief ly describes the dimension, the position of RF connectors and Pin def initions. Y ou are recommended to read the manual bef ore using the MU509-65. Getting to Know the MU509-65 Dimension The package of the WCDMA module is 145 pin with a dimension of 30 mm 30 mm 2.57mm. It is applied to the user interf ace board, and can be used as a wireless terminal in a network env ironment. 1 2 Position of RF Connectors The WCDMA module prov ided one antenna connector (MAIN_AN T) f or connecting the external antenna. 3 Pin Definitions The sequence of MU509-65 interf ace is shown belo w. 4 5 The Pin def initions of the MU509-65 interf ace is shown belo w. 6 Pin Name Pad Type Description Para mete r Min.

(V) Typ.

(V) Max.

(V) Pin No. 1 2 3 4 5 6 NC NC NC NC PCM_SYNC PCM_DIN 7 PCM_DOU T

O I O Not connected Not connected Not connected Not connected PCM interfa ce sync PCM I/F data in PCM I/F data out 8 PCM_CLK O PCM interfa ce clock

VOH VOL VIH VIL VOH VOL

2.15 0 1.69 0.3 2.15 0 VOH 2.15 VOL

9 10 11 12 13 NC NC WAKEUP_I N VBAT VBAT 14 PS_HOLD 15 16 17 18 Reserved NC NC NC

I PI PI I

Not connected Not connected Host to set the module into sleep or wake up the module from sle ep. VIH 1.69 VIL

0.3 3.3 3.3 VIH 1.17 VIL 0.3

Power supply input Power supply input Used for JTAG inte rfac e assigning a test point for it. Reserved, please keep this pin open. Not connected Not connected Not connected 7

3.8 3.8

2.6 0.45 2.9 0.91 2.6 0.45 2.6 0.45

2.9 0.91 4.2 4.2 2.1 0.63

2.1 0.63 2.7 1.95

Pin Name Pad Type Description Para mete r Min.

(V) Typ.

(V) Max.

(V) Pin No. 19 20 21 22 23 24 25 26 27 28 29 NC NC NC NC NC NC NC NC NC Reserved Reserved

I Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Reserved, please keep this pin open. Reserved, please keep this pin open. JTAG test mode sele ct

VIH 1.17

30 JTAG_T MS 31 32 33 VCC_EXT2 VCC_EXT1 NC PO PO

2.6 V power output 1.8 V power output Not connected 34 USIM_VCC PO Power supply for USIM ca rd 35 36 37 38 39 40 VCOIN JTAG_TRS T _N NC MIC2_P MIC2_N MIC1_P PI I

I I I Coin cell input JTAG res et Not connected Positive pole of the input of audio interface 2 . Negative pole of the input of audio interface 2 . Positive pole of the input of audio interface 1. 8 VIL

VIH VIL

0.3 2.5 1.65

2.6 1.8

1.65 1.8 1.95 2.7 1.5 1.17 0.3

2.85 3.0

3.0 3.25 2.1 0.63

Pin Name Pad Type Description Para mete r Min.

(V) Typ.

(V) Max.

(V) Pin No. 41 42 43 MIC1_N JTAG_TCK Reserved I I

44 GPIO I/O 45 GPIO I/O 46 GPIO I/O 47 48 49 50 51 52 53 54 55 NC GND GND GND

GPIO I/O GND GND GND

GPIO I/O Negative pole of the input of audio interface 1 . JTAG clock input Reserved, please keep this pin open. General Purpose I/O pin. The function of these pins has not been defined . General Purpose I/O pin . The function of these pins has not been defined . General Purpose I/O pin . The function of these pins has not been defined . Not connected Ground Ground Ground General Purpose I/O pin . The function of these pins has not been defined . Ground Ground Ground General Purpose I/O pin . The function of these pins has not been defined . 9

VIH VIL

VOH VOL VIH VIL VOH VOL VIH VIL VOH VOL VIH VIL

VOH VOL VIH VIL

1.17 0.3

2.15 0 1.69 0.3 2.15 0 1.69 0.3 2.15 0 1.69 0.3

2.15 0 1.69 0.3

2.1 0.63

2.6 0.45 2.9 0.91 2.6 0.45 2.9 0.91 2.6 0.45 2.9 0.91

2.6 0.45 2.9 0.91

2.6 0.45 2.9 0.91 Pin Name Pad Type Description Para mete r Min.

(V) Typ.

(V) Max.

(V) Pin No. 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 GND GND GND GND NC NC NC NC NC NC NC NC NC NC NC WAKEUP_O UT 72 JTAG_TD O 73 UART_DSR 74 UART_RTS 75 UART_DCD 76 UART_TX 77 UART_RIN G 78 UART_RX 79 UART_DTR

O O O O O O O I I Ground Ground Ground Ground Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Module to wake up the host JTAG test data output UART Dat a Set Ready UART Ready for re ceive UART Dat a Car rier D etect UART tr ansmit output UART Ring Indicator UART r eceive data input Data Te r minal Ready 10

VOH VOL VOH VOL VOH VOL VOH VOL VOH VOL VOH VOL VOH VOL VIH VIL VIH VIL

2.15 0 1.35 0 2.15 0 2.15 0 2.15 0 2.15 0 2.15 0 1.69 0.3 1.69 0.3

2.6 0.45 1.8 0.45 2.6 0.45 2.6 0.45 2.6 0.45 2.6 0.45 2.6 0.45 2.9 0.91 2.9 0.91 Pin No. Pin Name Pad Type Description Para mete r 80 UART_CTS 81 82 83 84 85 86 87 88 POWER_ON _OFF NC NC NC USB_DM USB_DP JTAG_TD I USIM_RES E T I I

I/O I/O I O UART Clea r to Send System power-on or power-off Not connected Not connected Not connected Full-speed USB D-

Full-speed USB D+

JTAG test data input USIM reset 89 USIM_D AT A I/O USIM data 90 USIM_CL K O USIM clock 91 92 93 94 95 LED_ST AT U S NC JTAG_RTCK NC NC I

Status indicator Current sink Drive strength: 10 mA Not connected JTAG re turn clock Not connected Not connected 11 VIH VIL VIH VIL

VIH VIL VOH VOL VOH VOL VIH VIL VOH VOL

VIH VIL

Min.

(V) 1.69 0.3 1.17 0.3

1.17 0.3 1.65/

2.7 0 1.65/

2.7 0

1.17 0.3

Typ.

(V) Max.

(V)

1.8/

2.85

1.8/

2.85

1.8/

2.85

1.8/

2.85

2.9 0.91 2.1 0.63

2.1 0.63 1.95/

3.0 0.36/

0.57 1.95/

3.0 0.36/

0.57 1.95/

3.0 0.36/

0.57 1.95/

3.0 0.36/

0.57

2.1 0.63

Pin Name Pad Type Description Para mete r Min.

(V) Typ.

(V) Max.

(V) Pin No. 96 EAR_OUT_ N 97 EAR_OUT_P 98 99 SPKR_OUT_ P SPKR_OUT_ N 100 RESIN_N 101 LED_M OD E 102 103 104 NC NC NC O O O O I I

Negative pole of the output of Earphone interfac e. Positive pole of the output of Earphone interfac e. Positive pole of the output of speaker interfa ce. Negative pole of the output of speaker interfa ce. Reset module. Mode indicator Current sink Drive strength: 10 mA Not connected Not connected Not connected General Purpose I/O pin . The function of these pins has not been defined . 105 GPIO I/O 106 107 108 GND MAI N_ANT GND

Ground RF main antenna pad Ground 109 GPIO I/O General Purpose I/O pin . The function of these pins has not been defined . 110 111 112 GND NC GND

Ground Not connected Ground 113 GPIO I/O General Purpose I/O pin . The function of these pins has not been defined . 114 GND

Ground 12

VIH VIL 1.17 0.3

VOH VOL VIH VIL

2.15 0 1.69 0.3

2.1 0.63

2.6 0.45 2.9 0.91

Pin No. 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 Pin Name Pad Type Description Para mete r Min.

(V) Typ.

(V) Max.

(V) NC GND NC NC NC NC GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND

Not connected Ground Not connected Not connected Not connected Not connected Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad Ther mal Ground Pad 13

exhibit
download
text

1 2

UserManual Safety

Users Manual

pdf

125.97 KiB

November 02 2016

Safety Information Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use your device safely. Read this information carefully before using the device. Electronic Device Do not use your device if using the device is prohibited. Do not use the device when using the device causes danger or interference with electronic devices. Medical Device Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device when using the device is prohibited. Some wireless devices may affect the performance of hearing aids or pacemakers. For any such problems, consult your service provider. If you are using an electronic medical device, consult the doctor or the device manufacturer to confirm whether radio waves affect the operation of this device. Potentially Explosive Atmosphere Do not use your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include the areas where you would normally be advised to turn off your vehicle engine. Triggering of sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not use your device at refueling points such as service stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air 1 contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity. Traffic Security Observe local laws and regulations while using the device. To prevent accidents, do not use your wireless device while driving. RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer. In a motor vehicle, do not place the device over the air bag or in the air bag deployment area. Otherwise, the device may hurt you owing to the strong force when the air bag inflates. Do not use your device while flying in an aircraft and before boarding an aircraft. Using wireless devices in an aircraft may cause danger to the operation of the aircraft and disrupt the wireless telephone network. It may also be considered illegal. Operating Environment Do not use the device in dusty, damp, and dirty places or places with magnetic fields. Otherwise, it may result in malfunction of the circuit. On a stormy day with thunder, do not use your device when it is being charged, to prevent While using the device, observe the local laws and regulations, and respect others'

The device should be installed and operated with a minimum distance of 20 cm between any danger caused by lightning. privacy and legal rights. the radiator and your body. Safety of Children Comply with all precautions with regard to children's safety. Letting the child play with your device or its accessories, which may include parts that can be detached from the device, may be dangerous, as it may present a choking hazard. Ensure that small children are kept away from the device and accessories. Accessories Use the accessories delivered only by the manufacturer. Using accessories of other 2 manufacturers or vendors with this device model may invalidate any approval or warranty applicable to the device, result in the non-operation of the device, and cause danger. Cleaning and Maintenance It is normal that your wireless device gets hot when you use or charge it. Before you clean or maintain the wireless device, stop all applications and disconnect the wireless device from your PC. Use your wireless device and accessories with care and in a clean environment. Keep the wireless device away from a fire or a lit cigarette. Protect your wireless device and accessories from water and vapor, and keep them dry. Do not drop, throw, or bend your wireless device. Clean your wireless device with a piece of damp and soft antistatic cloth. Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and benzene) to clean the device. Keep the ambient temperature between -30 to +75 for using the device. FCC and IC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. Note 1: This module has been certified to comply with RF exposure requirements under mobile or fixed condition, this module is to be installed only in mobile or fixed applications. The system antenna(s) used for this module must not exceed 2.5dBi. The transmitter module may not be co-located with any other transmitter or antenna. The FCC ID label on the final system must be labeled with Contains FCC ID:QISMU509-65.And the IC ID label on the final system must be labeled with Contains IC ID:

6369A-MU50965. As long as the above conditions are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring compliance with the module(s) installed and fully operational. For example, if a 3 host was previously authorized as an unintentional radiator under the Declaration of Conformity procedure without a transmitter certified module and a module is added, the host manufacturer is responsible for ensuring that the after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements. In case the conditions specified above cannot be met, the FCC/IC authorization would no longer be considered valid and the FCC/IC ID could not be used on the final product. Under these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter (s)) and obtaining a separate FCC authorization. Additional tests for compliance with RF Exposure compliance (i.e. portable applications) and transmitter / host specific tests could be required. Note 2: Any modifications made to the module will void the Grant of Certification, this module is limited to OEM installation only and must not be sold to end-users, end-user has no manual instructions to remove or install the device, only software or operating procedure shall be placed in the end-user operating manual of final products. Note 3: The device must not transmit simultaneously with with any other antenna or transmitter. Note 4: The transmitter module must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the host product. FCC Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. 15.19 NOTICE:

This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may 4 cause undesired operation. 15.21 NOTICE:

Changes or modifications made to this device not expressly approved by Huawei Technologies Co., Ltd. may void the FCC authorization to operate this device. 15.105 NOTE:

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by connecting or disconnecting the device to a PC, the user is encouraged to try to correct the interference by adopting one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the distance between the device and the receiver. Connect the device to an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio or TV technician for help. This device is intended for OEM integrators only. Host system must be labeled with "Contains FCC ID: QISMU509-65", FCC ID displayed connected. on label. Industry Canada Compliance RF exposure requirements Important safety information regarding radio frequency (RF) radiation exposure:

RF exposure guidelines require that the device be used at a minimum of 20 cm from the 5 human body. Exigences RF en matire d'exposition Informations de scurit importantes concernant l'exposition aux radiofrquences (RF) :

Les directives d'exposition RF exigent que l'appareil soit utilis une distance minimum de 20 cm du corps humain. This device complies with Industry Canada. The Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la class B est conforme la norme NMB-003 du Canada.. 6

		frequency	equipment class	purpose
1	2016-02-11	1852.4 ~ 1907.6	PCB - PCS Licensed Transmitter	Original Equipment
2			JBP - Part 15 Class B Computing Device Peripheral

Application Forms

app s	Applicant Information
1 2	Effective	2016-02-11
1 2	Applicant's complete, legal business name	Huawei Technologies Co.,Ltd
1 2	FCC Registration Number (FRN)	0007419963
1 2	Physical Address	Administration Building, Headquarters of Huawei
1 2		Shenzhen, N/A
1 2		China

app s	TCB Information
1 2	TCB Application Email Address	O******@cetecom.com
1 2	TCB Scope	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
1 2	TCB Scope	A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices

app s	FCC ID
1 2	Grantee Code	QIS
1 2	Equipment Product Code	MU509-65

app s	Person at the applicant's address to receive grant or for contact
1 2	Name	Z** X**
1 2	Telephone Number	+86-7********
1 2	Fax Number	+86-7********
1 2	E-mail	z******@huawei.com

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	04/30/2016
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2	Is this application for software defined/cognitive radio authorization?	No
1 2	Equipment Class	PCB - PCS Licensed Transmitter
1 2	Equipment Class	JBP - Part 15 Class B Computing Device Peripheral
1 2	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	HSDPA Module
1 2	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2	Modular Equipment Type	Single Modular Approval
1 2	Purpose / Application is for	Original Equipment
1 2	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2	Grant Comments	Single Licensed Modular Appproval Output power listed is ERP for Rule Part 22H and EIRP for Rule Part 24E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.5dBi for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22H and 24E. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use
1 2	Grant Comments	Single Licensed Modular Appproval
1 2	Is there an equipment authorization waiver associated with this application?	No
1 2	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2	Firm Name	Huawei Technologies Co., LTD
1 2	Name	Z****** F****
1 2	Telephone Number	86-75********
1 2	Fax Number	86-75********
1 2	E-mail	z******@huawei.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	22H		826.4	846.6	0.245	0.019 ppm	4M14F9W
1	2	24E		1852.4	1907.6	0.441	0.017 ppm	4M16F9W
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15B

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details