all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
[STC]User manual ver01 | Users Manual | 257.54 KiB | June 04 2017 / March 07 2017 | |||
1 2 3 4 |
|
[STC]Internal photos | Internal Photos | 1.83 MiB | June 04 2017 / March 07 2017 | |||
1 2 3 4 |
|
[STC]External Photos | External Photos | 618.04 KiB | June 04 2017 / March 07 2017 | |||
1 2 3 4 |
|
[Label]Label Location and Drawing | ID Label/Location Info | 34.55 KiB | June 04 2017 | |||
1 2 3 4 | [Confidentiality]Kollur R11 BlockDiagram 0208 | Block Diagram | April 06 2017 | confidential | ||||
1 2 3 4 | [Confidentiality]Kollur schematicc R11 0208 | Schematics | April 06 2017 | confidential | ||||
1 2 3 4 | [Confidentiality]operational description | Operational Description | April 06 2017 | confidential | ||||
1 2 3 4 |
|
[Declaration]DTS-UNII Declaration letter | Attestation Statements | 275.53 KiB | June 04 2017 | |||
1 2 3 4 |
|
[Declaration]Declaration of authorization | Cover Letter(s) | 141.43 KiB | June 04 2017 | |||
1 2 3 4 |
|
[Declaration]Declaration of identical | Attestation Statements | 98.45 KiB | June 04 2017 | |||
1 2 3 4 |
|
[Declaration]Long-Term & Short-Term Confidentiality Letter | Cover Letter(s) | 209.71 KiB | June 04 2017 | |||
1 2 3 4 |
|
[Declaration]Software Security Cover Letter | Cover Letter(s) | 103.65 KiB | June 04 2017 | |||
1 2 3 4 |
|
[Declaration]WIFI ch 12 -13 Declaration letter | Attestation Statements | 159.51 KiB | June 04 2017 | |||
1 2 3 4 | Test Setup Photos | June 04 2017 / March 07 2017 | ||||||
1 2 3 4 | Test Setup Photos | June 04 2017 / March 07 2017 | ||||||
1 2 3 4 | Test Report | July 04 2017 / June 04 2017 | ||||||
1 2 3 4 | Test Report | July 04 2017 / June 04 2017 | ||||||
1 2 3 4 | Test Report | June 04 2017 | ||||||
1 2 3 4 | RF Exposure Info | June 04 2017 | ||||||
1 2 3 4 | Test Report | June 04 2017 | ||||||
1 2 3 4 | Test Setup Photos | June 04 2017 / March 07 2017 | ||||||
1 2 3 4 | Test Report | June 04 2017 | ||||||
1 2 3 4 | Test Report | June 04 2017 | ||||||
1 2 3 4 | Test Report | June 04 2017 |
1 2 3 4 | [STC]User manual ver01 | Users Manual | 257.54 KiB | June 04 2017 / March 07 2017 |
Watt Quick Start Guide Getting to Know Your 1 Notebook Front side with display open 1 Ambient Light Sensor (hidden) 3 1 2 Front-facing Camera 2 3 Camera Indicator LED 4 Display 5 Power Button 6 Speaker 7 Keyboard Touchpad 8 9 Right Button Left Button 10 11 Speaker 11 Quick Start Guide | 2 9 10 4 5 6 7 8 1 2 1 Left side 1 2 Headset Jack (3.5mm) Type-C USB Port Right side 1 Type-C USB Port Charging the Notebook 2 Your notebook has a built-in (non-
removable) rechargeable battery. Connect the supplied AC power adapter and Type-C USB charging cable to charge your notebook until the charging indicator LED lights up green. The Type-C USB port on the right side cannot be used for charging. 3 | Quick Start Guide Setting up Your Notebook 3 Press the power button to turn on your notebook. Follow the on-screen instructions to complete the initial setup. Connect to the internet. Sign in to your notebook using a Microsoft account. If you have ever used Microsoft services like Outlook.com, Hotmail, OneDrive, Skype, Xbox, and Office 365, the email address and password that you use for any of those services is your Microsoft account. Quick Start Guide | 4 Start Using Your Notebook 4 at the Start menu To open the Start menu, click bottom-left corner. Click settings. Click Settings to access the system Power to shut down or restart your notebook, or enable Sleep mode. Click All apps to view all apps. ACTION CENTER To launch ACTION CENTER, click on the far right of the taskbar. Action Center displays all system and app notifications. It also provides shortcuts to frequently used settings. 5 | Quick Start Guide Protecting Your Notebook 5 Prevent others from using your notebook without your permission by locking the screen and setting a picture password, PIN or password. Lock the screen of your notebook There are two quick ways you can lock your Windows 10 screen. Hold down Windows Key and press L. Hold down Ctrl and Alt and then press Delete. Set the sign-in options Open Start menu, and then select Settings >
Accounts > Sign-in options. Choose one of the following:
Require sign-in, Password, PIN, or Picture password. Quick Start Guide | 6 Safety information 6 This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices. Interference with medical equipment Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device where prohibited. Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information. Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. 7 | Quick Start Guide Protecting your hearing when using a headset To prevent possible hearing damage, do not listen at high volume levels for long periods. Using a headset at high volumes may damage your hearing. To reduce this risk, lower the headset volume to a safe and comfortable level. Exposure to high volumes while driving may cause distraction and increase your risk of an accident. Areas with flammables and explosives Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols. Do not store or transport the device in containers with flammable liquids, gases, or explosives. Traffic security Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. Concentrate on driving. Your first responsibility is to drive safely. RF signals may affect the electronic systems of motor vehicles. For more information, consult the vehicle manufacturer. Quick Start Guide | 8 Do not place the device over the air bag or in the air bag deployment area in a motor vehicle. Doing so may hurt you because of the strong force when the air bag inflates. Wireless devices may interfere with the airplane's flight system. Do not use your device where wireless devices are not allowed according to the airplane company's regulations. Operating environment Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions. Do not use your device during thunderstorms to protect your device against any danger caused by lightning. Ideal operating temperatures are 0 C to 35 C. Ideal storage temperatures are 10 C to 45 C. Extreme heat or cold may damage your device or accessories. Do not expose your device to direct sunlight (such as on a car dashboard) for prolonged periods. To protect your device or accessories from fire or electrical shock hazards, avoid rain and moisture. Keep the device away from sources of heat and fire, such as a heater, microwave oven, stove, water heater, radiator, or candle. Do not place sharp metal objects, such as pins, near the earpiece or speaker. The earpiece may attract these objects and result in injury. Stop using your device or applications for a while if the device is overheated. If skin is exposed to an overheated device for an extended period, low temperature burn symptoms, such as red spots and darker pigmentation, may occur. Do not touch the device's antenna. Otherwise, communication quality may be reduced. 9 | Quick Start Guide Do not allow children or pets to bite or suck the device or accessories. Doing so may result in damage or explosion. Observe local laws and regulations, and respect the privacy and legal rights of others. Child's safety Comply with all precautions with regard to child's safety. Letting children play with the device or its accessories may be dangerous. The device includes detachable parts that may present a choking hazard. Keep away from children. The device and its accessories are not intended for use by children. Children should only use the device with adult supervision. Accessories Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other hazards. Choose only accessories approved for use with this model by the device manufacturer. The use of any other types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area. Charger safety For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible. Unplug the charger from electrical outlets and the device when not in use. Quick Start Guide | 10 Do not drop or cause an impact to the charger. If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or fire. Do not touch the power cord with wet hands or pull the power cord to disconnect the charger. Do not touch the device or the charger with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks. If your charger has been exposed to water, other liquids, or excessive moisture, take it to an authorized service center for inspection. Ensure that the charger meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1/
UL60950-1 and has been tested and approved according to national or local standards. Battery safety Do not connect battery poles with conductors, such as keys, jewelry, or other metal materials. Doing so may short-circuit the battery and cause injuries or burns. Keep the battery away from excessive heat and direct sunlight. Do not place it on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode if overheated. Do not attempt to modify or remanufacture the battery, insert foreign objects into it, or immerse or expose it to water or other liquids. Doing so may lead to fire, explosion, or other hazards. If the battery leaks, ensure that the electrolyte does not make direct contact with your skins or eyes. If the electrolyte touches your skins or splashes into your eyes, immediately flush with clean water and consult a doctor. Do not put batteries in fire as they may explode. Damaged batteries may also explode. 11 | Quick Start Guide Dispose of used batteries in accordance with local regulations. Improper battery use may lead to fire, explosion, or other hazards. Do not allow children or pets to bite or suck the battery. Doing so may result in damage or explosion. Do not smash or pierce the battery, or expose it to high external pressure. Doing so may lead to a short circuit or overheating. Do not drop the device or battery. If the device or battery is dropped, especially on a hard surface, it may be damaged. The device has a built-in, non-removable battery. Do not attempt to remove the battery, otherwise the device may be damaged. To replace the battery, take the device to an authorized service center. Use the battery only with a charging system that is IEEE-Std-1725 standard qualified. The use of an unqualified battery or charger may lead to fire, explosion, leakage, or other hazards. Replace the battery only with an IEEE-Std-1725 standard qualified battery. The use of an unqualified battery may lead to fire, explosion, leakage, or other hazards. Do not disassemble or open, crush, bend or deform, puncture or shred the battery. Otherwise, it may lead to electrolyte leakage, overheating, fire, or explosion. Do not solder battery poles or dismantle the battery. Doing so may lead to electrolyte leakage, excessive heat, fire, or explosion. Quick Start Guide | 12 Cleaning and maintenance Keep the device and accessories dry. Do not attempt to dry it with an external heat source, such as a microwave oven or hair dryer. Do not expose your device or accessories to extreme heat or cold. These environments may interfere with proper function and may lead to fire or explosion. Avoid collision, which may lead to device malfunctions, overheating, fire, or explosion. Before you clean or maintain the device, stop using it, stop all applications, and disconnect all cables connected to it. Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and benzene) to clean the device or accessories. These substances may cause damage to parts or present a fire hazard. Use a clean, soft, and dry cloth to clean the device and accessories. Do not place magnetic stripe cards, such as credit cards and phone cards, near the device for extended periods of time. Otherwise the magnetic stripe cards may be damaged. Do not dismantle or remanufacture the device and its accessories. This voids the warranty and releases the manufacturer from liability for damage. In case of damage, contact an authorized service center for assistance or repair. If the device screen is broken in a collision, immediately stop using the device. Do not touch or attempt to remove the broken parts. Promptly contact an authorized service center. Environmental protection The device and its accessories (if included), such as the power adapter, headset, and battery should not be disposed of with household garbage. 13 | Quick Start Guide Disposal of the device and its accessories is subject to local regulations. Support proper collection and recycling. Disposal and recycling information This symbol (with or without a solid bar) on the device, batteries (if included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling or proper disposal. For more detailed information about device or battery recycling, contact your local city office, household waste disposal service, or retail store. Disposal of the device and batteries (if included) is subject to WEEE Directive Recast (Directive 2012/
19/EU) and Battery Directive (Directive 2006/66/EC). The purpose of separating WEEE and batteries from other waste is to minimize the potential environmental impacts and human health risk of any hazardous substances that may be present. Reduction of hazardous substances This device is compliant with the REACH Regulation [Regulation (EC) No 1907/2006] and RoHS Directive Recast (Directive 2011/65/EU). Batteries (if included) are compliant with the Battery Directive
(Directive 2006/66/EC). For up-to-date information about REACH and RoHS compliance, please visit the web site http://consumer.huawei.com/certification. Quick Start Guide | 14 EU regulatory conformance Body worn operation The device complies with RF specifications when used at a distance of 0 mm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. Certification information (SAR) This device meets guidelines for exposure to radio waves. Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves. These guidelines were developed by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), an independent scientific organization, and include safety measures designed to ensure the safety of all users, regardless of age and health. The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a device. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level during operation can be well below the value. This is because the device is designed to use the minimum power required to reach the network. The SAR limit adopted by Europe is 2.0 W/kg averaged over 10 grams of tissue, and the highest SAR value for this device complies with this limit. The highest SAR value reported for this device type when tested in portable exposure conditions is 0.32 W/kg. 15 | Quick Start Guide Statement Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the web site http://consumer.huawei.com/certification. The following marking is included in the product:
This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network. Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund. Restrictions in the 5 GHz band:
WLAN function of this device is restricted only to indoor use when operating in the 5150 to 5350 MHz frequency range. Quick Start Guide | 16 FCC Regulatory Compliance Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using in portable exposure conditions is 1.07 W/kg. FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 17 | Quick Start Guide
--Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment. Restrictions in the 5 GHz band:
Within the 5.15 to 5.25 GHz band, UNII devices will be restricted to indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite System (MSS) operations. IC statement Canada, Industrie Canada (IC) This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numrique de classe B est conforme la norme NMB-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the Le prsent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage adiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. RF Radiation Exposure Statement:
For body worn operation, this device has been tested and meets RF exposure guidelines when used with an accessory that contains no metal. Dclaration de l'exposition aux radiations RF:
Pour le fonctionnement du corps, ce dispositif a t test et rpond aux directives d'exposition RF lorsqu'il est utilis avec un accessoire qui ne contient pas de mtal. 7 Personal Information and Data Security The use of some functions or third-party applications on your device could result in your personal information and data being lost or becoming accessible to others. Several measures are recommended to help you protect personal and confidential information. Place your device in a safe area to prevent it from unauthorized use. Set your device screen to lock and create a password or unlock pattern to open it. If you are worried about viruses when you receive messages or emails from a stranger, you can delete them without opening them. If you use your device to browse the Internet, avoid websites that might pose a security risk to avoid theft of your personal information. Quick Start Guide | 18 If you use services such as Wi-Fi or Bluetooth, set passwords for these services to prevent unauthorized access. When these services are not in use, turn them off. Install or upgrade device security software and regularly scan for viruses. Be sure to obtain third-party applications from a legitimate source. Downloaded third-party applications should be scanned for viruses. Install security software or patches released by Huawei or third-party application providers. Some applications require and transmit location information. As a result, a third-party may be able to share your location information. Your device may provide detection and diagnostic information to third-party application providers. Third party vendors use this information to improve their products and services. If you have concerns about the security of your personal information and data, please contact mobile@huawei.com. 19 | Quick Start Guide Legal Notice 8 Copyright Huawei Technologies Co., Ltd. 2017. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates (Huawei). The product described in this manual may include copyrighted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders. Trademarks and Permissions
, , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned may be the property of their respective owners. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-Fi, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance. Microsoft and Windows are trademarks of the Microsoft group of companies. Quick Start Guide | 20 Other trademarks, product, service and company names mentioned may be the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and therefore may not be activated or may be limited by local network operators or network service providers. Thus, the descriptions herein may not exactly match the product or its accessories which you purchase. Huawei reserves the right to change or modify any information or specifications contained in this manual without prior notice and without any liability. Third-Party Software Statement Huawei does not own the intellectual property of the third-party software and applications that are delivered with this product. Therefore, Huawei will not provide any warranty of any kind for third party software and applications. Neither will Huawei provide support to customers who use third-party software and applications, nor be responsible or liable for the functions or performance of third-party software and applications. Third-party software and applications services may be interrupted or terminated at any time, and Huawei does not guarantee the availability of any content or service. Third-party service providers provide content and services through network or transmission tools outside of the control of Huawei. To the greatest extent permitted by applicable law, it is explicitly stated that Huawei shall not compensate or be liable for services provided by third-party service providers, or the interruption or termination of third-party contents or services. 21 | Quick Start Guide Huawei shall not be responsible for the legality, quality, or any other aspects of any software installed on this product, or for any uploaded or downloaded third-party works in any form, including but not limited to texts, images, videos, or software etc. Customers shall bear the risk for any and all effects, including incompatibility between the software and this product, which result from installing software or uploading or downloading the third-party works. DISCLAIMER ALL CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT. THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT. Quick Start Guide | 22 Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and be responsible to obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy. 9 For More Help For more help, go to http://consumer.huawei.com/en/ to download the User Guide. Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region. The figures in this guide are provided for your reference only. The appearance and display features may vary slightly depending on the actual product version. 23 | Quick Start Guide
1 2 3 4 | [STC]Internal photos | Internal Photos | 1.83 MiB | June 04 2017 / March 07 2017 |
Page: 1 of 7 Adapter Front View of Battery Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Page: 2 of 7 Open View of EUT 1 Open View of EUT 2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Page: 3 of 7 Open View of EUT 3 Internal View of EUT 1 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Page: 4 of 7 Internal View of EUT 2 Internal View of EUT 3 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Page: 5 of 7 Internal View of EUT 4 Internal View of EUT 5 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Page: 6 of 7 Internal View of EUT 6 Internal View of EUT 7 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Page: 7 of 7 Internal View of EUT 8 BT / WLAN Antenna Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd.
1 2 3 4 | [STC]External Photos | External Photos | 618.04 KiB | June 04 2017 / March 07 2017 |
Page: 1 of 4 PHOTOGRAPHS OF EUT All View of EUT Front View of EUT Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Page: 2 of 4 Back View of EUT Side View of EUT 1 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Page: 3 of 4 Side View of EUT 2 Side View of EUT 3 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Page: 4 of 4 Side View of EUT 4 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-
tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-
pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd.
1 2 3 4 | [Declaration]DTS-UNII Declaration letter | Attestation Statements | 275.53 KiB | June 04 2017 |
Company : Huawei Technologies Co., Ltd. Date: Mar. 7, 2017 DTS-UNII Device Declaration Letter To whom it may concern:
We have declared below featured for FCC equipment authorization, Device FCC ID: QISWT-WX9
(1)
(2) DFS Device --
Master , Client with Radar detection capability , Client without radar detection capability, N/A Active / Passive Scanning , adhoc mode access point capability Frequency Band Active Scanning passive scanning Ad Hoc Mode or
(MHz)
(the device can transmit
(where the device is can a probe (beacon)) listen only with no 2412 - 2462MHz 5150 - 5250MHz 5250 - 5350MHz 5470 - 5725MHz 5725 - 5850MHz No No No No No Yes , Yes , Yes , Yes , Yes , No No No No No probes) Yes , Yes , Yes , Yes , Yes , WIFI Direct capability No No No No No Yes , Yes , Yes , Yes , Yes ,
`
Access point capability No No No No No Yes , Yes , Yes , Yes , Yes , Country code selection ability -
(3) If yes, pls explain how it was implemented : (pls also help to provide detail of options for each country selection) Default mode is always FCC compliant. Other country modes cannot be activated without receiving three independent country codes from different APs, otherwise remains in FCC default mode (always FCC compliant)
(4) pls check below :
Meet 15.202 requirement -
Yes , Yes , No , No A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network
(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , Yes , please see SW security Description. No Apply , (If apply , pls help to provide explanation on it was implement , and how software was controlled) Name / Title: Zhang Xinghai / GCTC Manager Signature:
Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District Shenzhen China
1 2 3 4 | [Declaration]Declaration of authorization | Cover Letter(s) | 141.43 KiB | June 04 2017 |
Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, SGS Taiwan Ltd. 134, Wu Kung Rd., Wuku Industrial Zone Taipei County Taiwan Shenzhen China Declaration of Authorization We Name:
Address:
Longgang District, City:
Country:
Declare that:
Name Representative of agent: . (1) Agent Company name:
Address:
City:
Country is authorized to apply for Certification of the following product(s):
Product description: HUAWEI MateBook Type designation: WT-W09WT-W19 Trademark:
on our behalf. Date:
City:
Name:
Function:
Signature:
Notes:
(1): Required for FCC application
(2): For FCC it must be the Grantee Code owner or the authorized agent. GCTC Manager Zhang Xinghai Mar. 7, 2017 HUAWEI China
1 2 3 4 | [Declaration]Declaration of identical | Attestation Statements | 98.45 KiB | June 04 2017 |
Attestation Letter Date: Mar. 7, 2017 To Whom It May Concern:
We, Huawei Technologies Co., Ltd., declare on our sole responsibility that the product, Product Name: HUAWEI MateBook Model: WT-W09 is in all relevant parts equivalent to the product, Model: WT-W19 The differences between above models are:
Market Segmentation. Regards, ____________________
1 2 3 4 | [Declaration]Long-Term & Short-Term Confidentiality Letter | Cover Letter(s) | 209.71 KiB | June 04 2017 |
Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: (QISWT-WX9). Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:
Exhibit Type Block Diagram Schematics Operational Description File Name
(Note- If Internal Photos or the Users Manual are to be requested under Long-Term Confidentiality justification must be required per the FCCs Confidentiality Policy.) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:
Exhibit Type External Photos Internal Photos Test Setup Photos Users Manual File Name Planned release Date or Term of STC 90 days from date of grant Sincerely, _______________________________ Zhang Xinghai / GCTC Manager / Huawei Technologies Co., Ltd.
1 2 3 4 | [Declaration]Software Security Cover Letter | Cover Letter(s) | 103.65 KiB | June 04 2017 |
SOFTWARE SECURITY FOR U-NII DEVICES Pursuant to FCC Part 15E 15.407(i) and KDB 594280 D02 U-NII Device Security, applicant must describe the overall security measures and systems that ensure that only:
Authenticated software is loaded and operating the device. The device is not easily modified to operate with RF parameters outside of the authorization 1. 2. The description of the software must address the following questions in the operational description for the device and clearly demonstrate how the device meets the security requirements. 1. Describe how any software/firmware updates for elements than can affect the devices RF parameters will be obtained, downloaded, validated and installed. For software that is accessed through manufacturers website or devices management system, describe the different levels of security as appropriate. There is no downloadable software provided by the manufacturer that can modify critical radio transmitter parameters. All critical parameters are programmed in OTP memory at the factory and cannot be modified or overridden by third parties. 2. Describe the RF parameters that are modified by any software/firmware without any hardware changes. Are these parameters in some way limited such that any other software/firmware changes will not allow the device to exceed the authorized RF characteristics?
There are no rf parameters that can be modified. All rf parameters are programmed in OTP memory at the General factory and cannot be modified or overridden by third parties. Description 3. Describe in detail the authentication protocols that are in place to ensure that the source of the RF-related software/firmware is valid. Describe in detail how the RF-related software is protected against modification. The firmware is programmed at the factory and cannot be modified by third parties. 4. Describe in detail any encryption methods used to support the use of legitimate RF-related software/firmware. The firmware is programmed at the factory and cannot be modified by third parties therefore no encryption is necessary. 5. For a device that can be configured as a master and client (with active or passive scanning), explain how the device ensures compliance for each mode? In particular if the device acts as master in some band of operation and client in another; how is compliance ensured in each band of operation?
This is a client module only. 1. Explain if any third parties have the capability to operate a U.S.-sold device on any other regulatory domain, frequencies, or in any manner that may allow the device to operate in violation of the devices authorization if activated in the U.S. Third parties do not the capability to operate in any manner that is violation of the certification in the U.S. 2. Describe, if the device permits third-party software or firmware installation, what mechanisms are provided by the manufacturer to permit integration of such functions while ensuring that the RF parameters of the device cannot be operated outside its authorization for operation in the U.S. In the description include what controls and/or agreements are in place with providers of third-party functionality to ensure the devices underlying RF parameters are unchanged and how the 3rd Party manufacturer verifies the functionality. Access Control RF parameters are programmed into OTP memory at the factory and cannot be reprogrammed or re-flashed by third parties. 3. For Certified Transmitter modular devices, describe how the module grantee ensures that host manufacturers fully comply with these software security requirements for U-NII devices. If the module is controlled through driver software loaded in the host, describe how the drivers are controlled and managed such that the modular transmitter RF parameters are not modified outside the grant of authorization. There are no rf parameters that can be modified. All rf parameters are programmed in OTP memory at the factory and cannot be modified or overridden by third parties. The module is not controlled by driver software on the host and cannot override critical rf parameters stored in module OTP memory. 1. Describe the user configurations permitted through the UI. If different levels of access are permitted for professional installers, system integrators or end-users, describe the differences. No UI provided. a) What parameters are viewable and configurable by different parties?
None b) What parameters are accessible or modifiable by the professional installer or system integrators?
User None Configuration
(1) Are the parameters in some way limited, so that the installers will not enter parameters guide that exceed those authorized?
The module micro-code reads the parameters from the module OTP memory. These parameters cannot be modified or overridden by sw drivers.
(2) What controls exist that the user cannot operate the device outside its authorization in the U.S.?
Default mode is always FCC compliant. Other country modes cannot be activated without receiving three independent country codes from different APs, otherwise remains in FCC default mode (always FCC compliant) User Configuration guide c) What parameters are accessible or modifiable to by the end-user?
None
(1) Are the parameters in some way limited, so that the user or installers will not enter parameters that exceed those authorized?
The module micro-code reads the parameters from the module OTP memory. These parameters cannot be modified or overridden by sw drivers.
(2) What controls exist that the user cannot operate the device outside its authorization in the U.S.?
. Default mode is always FCC compliant. Other country modes cannot be activated without receiving three independent country codes from different APs, otherwise remains in FCC default mode (always FCC compliant) d) Is the country code factory set? Can it be changed in the UI?
Default country code is set in the factory and no UI is provided for modification.
(1) If it can be changed, what controls exist to ensure that the device can only operate within its authorization in the U.S.?
Programmed for default mode which is always FCC compliant. Always set for default for all start-ups, resets, timeouts or other host or network events. e) What are the default parameters when the device is restarted?
Always FCC compliant 2. Can the radio be configured in bridge or mesh mode? If yes, an attestation may be required. Further information is available in KDB Publication 905462 D02. No 3. For a device that can be configured as a master and client (with active or passive scanning), if this is user configurable, describe what controls exist, within the UI, to ensure compliance for each mode. If the device acts as a master in some bands and client in others, how is this configured to ensure compliance?
This is a client device. 4. For a device that can be configured as different types of access points, such as point-to-point or point-to-multipoint, and use different types of antennas, describe what controls exist to ensure compliance with applicable limits and the proper antenna is used for each mode of operation. (See Section 15.407(a)) This device is not an access point. Product Name: HUAWEI MateBook The applicant: Huawei Technologies Co., Ltd. FCC ID: QISWT-WX9 Name / Title: Zhang Xinghai / GCTC Manager
1 2 3 4 | [Declaration]WIFI ch 12 -13 Declaration letter | Attestation Statements | 159.51 KiB | June 04 2017 |
WIFI Channel 12 & 13 Declaration Letter To whom it may concern :
We have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 &
13 operating capability for FCC ID : QISWT-WX9 Please check Product hardware does not have the capability to operate on channel 12 & 13 Product hardware has the capability to operate on channel 12 & 13. However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 D01 requirement. Pls explain detail here. _________________ Others Pls explain detail here. Company Name: Huawei Technologies Co., Ltd. Address : Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District Shenzhen China Name / Title : Zhang Xinghai / GCTC Manager Signature :
Phone : 0755-28970299 Email : zhangxinghai@huawei.com Date : Mar. 7, 2017
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-04-06 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | JBP - Part 15 Class B Computing Device Peripheral | |||
4 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2017-04-06
|
||||
1 2 3 4 | Applicant's complete, legal business name |
Huawei Technologies Co.,Ltd
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0007419963
|
||||
1 2 3 4 | Physical Address |
Administration Building, Headquarters of Huawei
|
||||
1 2 3 4 |
Shenzhen
|
|||||
1 2 3 4 |
China
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
a******@babt.com
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 4 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
QIS
|
||||
1 2 3 4 | Equipment Product Code |
WT-WX9
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
Z****** X****
|
||||
1 2 3 4 | Telephone Number |
+86-7********
|
||||
1 2 3 4 | Fax Number |
+86-7********
|
||||
1 2 3 4 |
z******@huawei.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/03/2017 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 4 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | HUAWEI MateBook | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Output power is conducted. The highest reported SAR for body-extremity, including simultaneous transmission use conditions, is 1.07 W/kg. | ||||
1 2 3 4 | Output power is conducted. | |||||
1 2 3 4 | Output power is conducted. The highest reported SAR for body-extremity, including simultaneous transmission use conditions is 1.02 W/kg. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
SGS Taiwan Ltd. Electronics & Communication Lab
|
||||
1 2 3 4 |
TUV SUD Product Service
|
|||||
1 2 3 4 | Name |
R**** W********
|
||||
1 2 3 4 |
M******** J****
|
|||||
1 2 3 4 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 4 |
00-44********
|
|||||
1 2 3 4 | Fax Number |
+886-********
|
||||
1 2 3 4 |
00-44********
|
|||||
1 2 3 4 |
r******@sgs.com
|
|||||
1 2 3 4 |
m******@tuv-sud.co.uk
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 38 CC | 5180 | 5240 | 0.039 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 38 CC ND | 5260 | 5320 | 0.039 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | 38 CC ND | 5500 | 5700 | 0.039 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | 38 CC | 5745 | 5825 | 0.039 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0130000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2412 | 2462 | 0.168 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | CC | 2402 | 2480 | 0.01 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC