FCC ID: QISKOB-W09 HUAWEI MediaPad T3

8mm 20mm Quick Start Guide 20mm 5.5mm 902170_02 6mm TUV-SUD Your device at a glance Before you start, let's take a look at your new device. To power on your device, press and hold the power button until the screen turns on. To power off your device, press and hold the power button, and then touch

.

To force your device to restart, press and hold the power button until your device vibrates. 1 TUV-SUD Getting Started Follow the instructions in the following figures to set up your device.

Be careful not to scratch your device or hurt yourself when using the eject pin. Store the eject pin out of the reach of children to prevent accidental swallowing or injury. 2 TUV-SUD For more information Log on to the official Huawei website. You can:

Visit http://consumer.huawei.com/en/ to download user guides, view frequently asked questions and other information. Visit http://consumer.huawei.com/en/support/hotline for the most up-

to-date contact information for your country or region. Go to Settings and touch About tablet > Legal information to view legal information for your product. Go to Settings and touch About tablet > Legal information > Safety information to view safety information for your product. Go to Settings and touch About tablet > Authentication info to view regulatory information for your product. Go to Settings and touch About tablet > Certification logos to view more information on certification logos for your product. All pictures and illustrations in this guide, including but not limited to the product color, size, and display content, are for your reference only. The actual product may vary. Nothing in this guide constitutes a warranty of any kind, express or implied. 3 TUV-SUD Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety volume levels for long periods. To prevent possible hearing damage, do not listen at high Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. Ideal operating temperatures are 0 C to 35 C. Ideal storage temperatures are -40 C to +70 C. Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. 4 TUV-SUD To prevent damage to your device's parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields. When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. Unplug the charger from electrical outlets and the device when not in use. Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. Disposal and recycling information The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives;

they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws. 5 TUV-SUD Proper collection and recycling of your equipment helps ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer or household waste disposal service or visit the website http://consumer.huawei.com/en/. Reduction of hazardous substances This device and its electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries

(where included) regulations. For declarations of conformity about REACH and RoHS, please visit our web site http://consumer.huawei.com/

certification. EU regulatory conformance Body worn operation The device complies with RF specifications when used near your ear or at a distance of 0.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. The highest SAR value reported for this device type when tested at the ear is 1.80 W/kg, and when properly worn on the body is 1.13 W/kg. Statement Hereby, Huawei Technologies Co., Ltd. declares that this device KOB-W09 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at http://consumer.huawei.com/certification. This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network. 6 TUV-SUD Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund. Restrictions in the 5 GHz band:

According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain

(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania

(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria

(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), the United Kingdom (UK), Turkey (TR), Norway

(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. Frequency Bands and Power

(a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.

(b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard. The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2.4G: 20dBm, Bluetooth: 20dBm, Wi-Fi 5G: 5150-5350MHz: 23dBm, 5470-5725MHz: 30dBm. Accessories and Software Information Some accessories are optional in certain countries or regions. Optional accessories can be purchased from a licensed vendor as required. The following accessories are recommended:

Adapters: HW-050100X01 (X represents the different plug types used, which can be either C, U, J, E, B, A, I, R, Z or K, depending on your region) Batteries: HB3080G1EBW,HB3080G1EBC 7 TUV-SUD Earphones: MEMD1532B528000, HA1-3, 1293#+3283# 3.5MM-150 The product software version is KOB-W09:KOB-

W09C100B252CUSTC100D001. Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules. All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user. For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at http://consumer.huawei.com/

certification. FCC Regulatory Compliance Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using at the ear is 0.72 W/kg, and when properly worn on the body is 1.19 W/kg. FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver. 8 TUV-SUD --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment. 9 TUV-SUD Legal Notice Trademarks and Permissions

,

, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Android is a trademark of Google Inc. word mark and logos are registered trademarks owned by The Bluetooth Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-Fi Fi Alliance. ENERGY STAR For information related to ENERGY STAR www.energystar.gov.

, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-

, please visit the website MARK Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy. Copyright Huawei Technologies Co., Ltd. 2018. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES. 10 TUV-SUD Model: KOB-W09 TUV-SUD

Quick Start 1 1 Your device at a glance Before you start, let's take a look at your new device. To power on your device, press and hold the power button until your device vibrates and the screen turns on. To power off your device, press and hold the power button, and then touch

. To force your device to restart, press and hold the power button until your device vibrates. 2 2 Getting started Follow the instructions in the following figures to set up your device. Be careful not to scratch your device or hurt yourself when using the eject pin. Store the eject pin out of the reach of children to prevent accidental swallowing or injury. 3 3 For more information If you encounter any problems while using your device, you can obtain help from the following resources:

Log on to the official Huawei website. You can:

Visit http://consumer.huawei.com/en/ to download user guides, view frequently asked questions, and use emulators to test out Huawei products. Visit http://consumer.huawei.com/en/support/hotline for the most up-to-date contact information for your country or region. Settings and touch About tablet > Legal Settings and touch About tablet > Legal Go to information to view legal information for your product. Go to information > Safety information to view safety information for your product. Go to Authentication info to view regulatory information for your product. Go to Certification logos to view more information on certification logos for your product. Settings and touch About tablet >

Settings and touch About tablet >

All pictures and illustrations in this guide, including but not limited to the product color, size, and display content, are for your reference only. The 4 actual product may vary. Nothing in this guide constitutes a warranty of any kind, express or implied. 4 Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety To prevent possible hearing damage, do not listen at high volume levels for long periods. Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. Ideal operating temperatures are 0 C to 35 C. Ideal storage temperatures are -40 C to +70 C. Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. Keep the device and the battery away from excessive heat and direct sunlight. Do not place 5 them on or in heating devices, such as microwave ovens, stoves, or radiators. Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. To prevent damage to your device's parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields. When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. Unplug the charger from electrical outlets and the device when not in use. Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. 6 Disposal and recycling information The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws. Proper collection and recycling of your equipment helps ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer or household waste disposal service or visit the website http://consumer.huawei.com/en/. Reduction of hazardous substances This device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries

(where included) regulations, etc. For declarations of 7 conformity about REACH and RoHS, please visit our web site http://consumer.huawei.com/certification. EU regulatory conformance Body worn operation The device complies with RF specifications when used near your ear or at a distance of 0.5 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. The highest SAR value reported for this device type when tested at the ear is 1.12 W/kg, and when properly worn on the body is 0.71W/kg. Statement Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The most recent and valid version of the DoC (Declaration of Confirmation) can be viewed at http://consumer.huawei.com/certification. This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network. Restrictions in the 2.4 GHz band:

8 Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund. Frequency Bands and Power

(a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.

(b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates:

The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard. The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2.4G: 20 dBm,Bluetooth:

20 dBm,Wi-Fi 5G: 5150-5350: 23 dBm, 5470-5725 30dBm. Accessories and Software Information It is recommended that the following accessories should be used:

Adapters: HW-050100X01 (X represents the different plug types used, which can be either C, U, J, E, B, A, I, R, Z or K, depending on your region) Batteries: HB3080G1EBW,HB3080G1EBC Earphones: MEMD1532B528000HA1-31293#+3283#

3.5MM-150 9 The product software version is KOB-W09C001B003 Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules. All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user. For the most recent information about accessories and software, please see the DoC (Declaration of Confirmation) at http://consumer.huawei.com/certification. FCC Regulatory Compliance Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using at the ear is 0.55 W/kg, and when properly worn on the body is 1.19 W/kg. FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 10 residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment. 11 5 Legal Notice Trademarks and Permissions

,

, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Android is a trademark of Google Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-Fi, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance. ENERGY STAR MARK For information related to ENERGY STAR, please visit the website www.energystar.gov. Other trademarks, product, service and company names mentioned may be the property of their respective owners. Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy. 12 Copyright Huawei Technologies Co., Ltd. 2017. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES. 13

HUAWEI MediaPad T3 (KOB-W09) SECRET Photo documentation of external of product Page1, Total3 HUAWEI MediaPad T3 (KOB-W09) SECRET Page2, Total3 HUAWEI MediaPad T3 (KOB-W09) SECRET Page3, Total3

HUAWEI MediaPad T3KOB-W09 SECRET Label Location Page1, Total 1

HUAWEI Cex FCC ID: QISKOB-Wog Model: KOB-W09 Made in China Huawei Technologies Co., Ltd. Shenzhen 518129 PRC

Class II permissive change request letter Date (2019-11-13) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD REF: Class II permissive change, pursuant to section 2.1043, for FCC ID: QISKOB-W09 Dear Sir or Madam, Pursuant to section 2.1043, Huawei Technologies Co., Ltd. Hereby submit a rrequest for class II permissive change to our Smart Phone, model: KOB-W09, FCC ID: QISKOB-W09, Grant date:2018-11-07. Description of the change:

The tablet KOB-W09 have some hardware changes which are list in the following table. Nothing changed apart from the list content below, including the appearance, the antenna, Bluetooth mode, WiFi mode, adapter, battery and so on. Model Supported frequency bands SIM Card NFC Appearance & Camera &

Memory & EUT Dimension & ID PCBA & PCB Layout Antenna Adapter Battery WiFi/BT RF Parameter Main RF Frequency NV The other material KOB-W09 new Original The same KOB-W09 old Modified The same The same The same The same The same The dimension for PCBA is the same, but there are little change in the driver of LCD backlight, this time we changed the LED backlight IC model, accordingly add some power IC for this change. The same The same The same The same The same The same The same The same The same The same We used the new style for conductive foam and used the new design of LCD FPC So in this FCC application for HUAWEI MediaPad T3, KOB-W09, FCC ID: QISKOB-W09

-New EMC report HR/2019/B0001 according to 15B was submitted and it is representative of the compliance of this C2PC application.

-New 5GHz Wi-Fi RF test report B19N02463-RLAN according to Part 15E was submitted and it is representative of compliance of this C2PC application. In this test report only the radiated spurious emission was included, other test data please refer to original test report B18N00835-RLAN, B17N00263-RLAN02, B17N00263-RLAN01, B17N00263-DFS, I17Z60880-EMC01 of this FCC ID, and they are representative of compliance of this C2PC application.

-New 2.4GHz Wi-Fi RF test report B19N02463-WLAN according to Part 15C was submitted and it is representative of compliance of this C2PC application. In this test report only the radiated spurious emission was included, other test data please refer to original test report B18N00853-WLAN, B17N00263- WLAN of this FCC ID, and they are representative of compliance of this C2PC application.

-New SAR Test report HR/2019/B000101 was submitted and it is representative of compliance of this C2PC application. In this report, worst case of each transmitter band were repeated based on original test report, other test data was referred from original test report SZEM1806005033RG, SZEM1706006069RG, and they are representative of compliance of this C2PC application. No new bluetooth test reports were submitted, as due to the pre-scan result based on this modification, radiated spurious emission test date of bluetooth did not become worse. So in this C2PC application below new documents was submitted:

Internal Photos Schematic Parts List Test report of 15B, 15C and 15E SAR test report Test setup photos The other documents from the original application remain unchanged, they are still effective and representative of the compliance of this C2PC application. Sincerely, For and Behalf of:

Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226

2019-11-18

Huawei Technologies Co., Ltd. Federal Communications Commission Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISKOB-W09 To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Part list

Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market.

*****************************************************************************

In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until Jan, 29th, 2020

Internal Photos Test Setup Photos

******************************************************************************

It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards 18_Confidentiality Letter V1.0 Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 18_Confidentiality Letter V1.0

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/B000101 Appendix C Calibration certificate 1. Dipole D2450V2-SN 733(2016-12-07) D5GHzV2-SN 1165(2016-12-13) 2. DAE DAE3-SN414(2018-12-03) DAE4-SN896(2019-09-18) 3. Probe EX3DV4-SN 3962(2019-02-25)

C2PC Justification Letter Date (July 6, 2018) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China Hereby to do the Justification on FCC C2PC application: HUAWEI MediaPad T3, Model no.:

KOB-W09, FCC ID: QISKOB-W09, Granted date: 06/28/2017 as following:

KOB-W09 is a MediaPad supports 5GHz Wi-Fi, 2.4GHz Wi-Fi, Bluetooth, USB functions. Description of the changes:

Also the software changed form KOB-W09C331B002-log to KOB-W09C100B007, There is no RF and other difference between two versions, Only the version name is different for these two versions. For more detail please check:

-User Manual

-Schematics

-Part List

-Internal Photos So in this FCC C2PC application:

New EMC test report SZEM1806005033RG according to Part 15B was submitted and it is representative of compliance of this C2PC application. New 5GHz Wi-Fi RF test report B18N00835-RLAN according to Part 15E was submitted and it is representative of compliance of this C2PC application. In this test report only the radiated spurious emission and band edge was included, other test data please refer to original test report B17N00263-

RLAN02, B17N00263-RLAN01, B17N00263-DFS, I17Z60880-EMC01 of this FCC ID, and they are representative of compliance of this C2PC application, and they are representative of compliance of this C2PC application. New 2.4GHz Wi-Fi RF test report B18N00835-WLAN according to Part 15C was submitted and it is representative of compliance of this C2PC application. In this test report only the radiated spurious emission was included, other test data please refer to original test report B17N00263- WLAN of this FCC ID, and it is representative of compliance of this C2PC application. New BLE RF test report B18N00835-BLE according to Part 15C was submitted and it is representative of compliance of this C2PC application. In this test report only the radiated spurious emission was included, other test data please refer to original test report B17N00263- BLE of this FCC ID, and they are representative of compliance of this C2PC application. and it is representative of compliance of this C2PC application. New Bluetooth BDR+EDR RF test report B18N00835-BT according to Part 15C was submitted and it is representative of compliance of this C2PC application. In this test report only the radiated spurious emission was included, other test data please refer to original test report B17N00263- BT of this FCC ID, and they are representative of compliance of this C2PC application, and it is representative of compliance of this C2PC application. New SAR Test report SZEM1806005033RG was submitted and it is representative of compliance of this C2PC application. In this report, worst case of each transmitter band were repeated based on original test report, other test data was referred from original test report SZEM1706006069RG , and it is representative of compliance of this C2PC application. Sincerely, For and Behalf of:

Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. QISKOB-W09 Request for Confidentiality Federal Communications Commission 2018-07-09 Oakland Mills Road Columbia MD 21046 Subject:

FCC ID:

To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Part list Schematic Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market.

*****************************************************************************

In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until octomber,29th,2018 N/A

******************************************************************************

It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards 18_Confidentiality Letter V1.0 Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 18_Confidentiality Letter V1.0

Huawei Technologies Co., Ltd. AddressHuawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP518129 Page 1/1 To: TUV SUD BABT From:Zhang Xinghai Email address: hwzhangxh@huawei.com Fax : NULL Fax:0086-755-89652518 Http: www.huawei.com Tel:0086-755-89651014 SubjectLetter of Authorization 2017-04-10 To whom it may concern:

FCC ID: QISKOB-W09 We the undersigned, hereby authorize TUV SUD BABT to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by TUV SUD BABT on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. Sincerely, For and Behalf of:

Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:

Request for Confidentiality FCC ID:

QISKOB-W09 To Whom It May Concern:

2017-04-26 Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market.

*****************************************************************************

In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2017-7-30 External Photos Internal Photos Test Setup Photos User Manual

******************************************************************************

It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: zhangxinghai@huawei.com Fax: 0086-0755- 28970299

Huawei Technologies Co.,Ltd. Statement for 2.4G Wi-FiTM QISKOB-W09 Federal Communications Commission 2017-04-27 Oakland Mills Road Columbia MD 21046 Subject:

FCC ID:

To Whom It May Concern:

We, Huawei Technologies Co., Ltd., states that our product KOB-W09 comply with the requirement in KDB 594280 D01 Software Configuration Control v02r01. For 2.4G Wi-Fi part, only support channels 1-11, the channel 12 and channel 13 are disabled by software in the factory, this setting is not accessible and cant active by the user or any other third-party. If have any questions concerning the above, please contact the undersigned. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226

**Wi-Fi is a trademark of Wi-Fi Alliance 26_2.4G Wi-Fi Declaration Letter V1.0

Huawei Technologies Co.,Ltd. Statement Federal Communications Commission 2017-04-27 Oakland Mills Road Columbia MD 21046 Subject: Statement for 5G Wi-FiTM FCC ID: QISKOB-W09 The information within this section of the Operational Description is to show compliance against the Software Security Requirements laid out within KDB 594280 D02 U-NII Device Security v01r03. The information below describes how we maintain the overall security measures and systems so that only:

1. Authenticated software is loaded and operating on the device 2. The device is not easily modified to operate with RF parameters outside of the authorization General Description 1. Describe how any software/firmware updates for elements than can affect the devices RF parameters will be obtained, downloaded, validated and installed. For software that is accessed through manufacturers website or devices management system, describe the different levels of security as appropriate. 2. Describe the RF parameters that are modified by any software/firmware without any hardware changes. Are these parameters in some way limited such that any other software/firmware changes will not allow the device to exceed the authorized RF characteristics?

The software/firmware update is bundled, as part of the handset software update, and the user or installer cannot modify the content. The installation and/or update proceeds automatically once the user accepts to install/update the software/firmware. The Software/Firmware in the device, controls the following RF parameters:

1. Transmitter Frequency 2. Transmitter Output Power 3. Receiver Frequency 4. Channel Bandwidth 5. RSSI calibration The Software/Firmware controls the RF parameters listed above so as to comply with the specific set of regulatory limits in accordance with the FCC grants issued for this device. The RF parameters are limited to comply with FCC rules and requirements during calibration of the device in the factory. Security keys (certification certificates) are in place to ensure that these parameters cannot be access by the User and/or a 3rd party. All software images are digitally signed with public key cryptography. Images are signed by private key stored in securely merged server, and verified by 3.Describe in detail the authentication protocols that are in place to ensure that the source of the RF-

related software/firmware is valid. Describe in detail 25_5G Wi-Fi Declaration Letter V1.0 how the RF-related software is protected against modification. 4. Describe in detail any encryption methods used to support the use of legitimate RF-related software/firmware. 5. For a device that can be configured as a master and client (with active or passive scanning), explain how the device ensures compliance for each mode?

In particular if the device acts as master in some band of operation and client in another; how is compliance ensured in each band of operation?

3rd Party Access Control 1. Explain if any third parties have the capability to operate a U.S.-sold device on any other regulatory domain, frequencies, or in any manner that may allow the device to operate in violation of the devices authorization if activated in the U.S. 2.Describe, if the device permits third-party software or firmware installation, what mechanisms are provided by the manufacturer to permit integration of such functions while ensuring that the RF parameters of the device cannot be operated outside its authorization for operation in the U.S. In the description include what controls and/or agreements are in place with providers of third-

party functionality to ensure the devices underlying RF parameters are unchanged and how the manufacturer verifies the functionality. 3. For Certified Transmitter modular devices, describe how the module grantee ensures that host manufacturers fully comply with these software security requirements for U-NII devices. If the module is controlled through driver software loaded in the host, describe how the drivers are controlled and managed such that the modular transmitter RF parameters are not modified outside the grant of authorization.7 SOFTWARE CONFIGURATION DESCRIPTION 1. Describe the user configurations permitted through the UI. If different levels of access are permitted for professional installers, system integrators or end-users, describe the differences. a) What parameters are viewable and configurable by different parties?9 b) What parameters are accessible or modifiable by the professional installer or system integrators?

i)Are the parameters in some way limited, so that the installers will not enter parameters that exceed those authorized?

ii) What controls exist that the user cannot operate the device outside its authorization in the U.S.?

25_5G Wi-Fi Declaration Letter V1.0 public key stored in a device when they are flashed into the device. Some SW images are verified with the public key when they are executed. Software/firmware is not encrypted. This handset will only operate as a master device in Wi-Fi direct mode, which are limited to the 2.4GHz band on channels 1 11 and 5GHz band on channels 36/40/44/48/149/153/157/161/165. This device can only be configured as a client in all UNII bands where it operates using passive scanning techniques. 3rd party does not have the capability 3rd party does not have the permission Not applicable this is not a modular device NA NA NA NA NA NA NA NA NA NA NA NA NA NA c) What parameters are accessible or modifiable by the end-user?

i) Are the parameters in some way limited, so that the installers will not enter parameters that exceed those authorized?

ii) What controls exist that the user cannot operate the device outside its authorization in the U.S.?

d) Is the country code factory set? Can it be changed in the UI?

i)If it can be changed, what controls exist to ensure that the device can only operate within its authorization in the U.S.?

e) What are the default parameters when the device is restarted?

2. Can the radio be configured in bridge or mesh mode? If yes, an attestation may be required. Further information is available in KDB Publication 905462 D02. 3. For a device that can be configured as a master and client (with active or passive scanning), if this is user configurable, describe what controls exist, within the UI, to ensure compliance for each mode. If the device acts as a master in some bands and client in others, how is this configured to ensure compliance?

4.For a device that can be configured as different types of access points, such as point-to-point or point-to-multipoint, and use different types of antennas, describe what controls exist to ensure compliance with applicable limits and the proper antenna is used for each mode of operation. (See Section 15.407(a)) Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 25_5G Wi-Fi Declaration Letter V1.0

**Wi-Fi is a trademark of Wi-Fi Alliance 25_5G Wi-Fi Declaration Letter V1.0

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 UNII Device Declaration Letter To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: QISKOB-W09

(1) DFS Device:

Master N/A Client with Radar detection capability Client without radar detection capability,

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning

(where the device is can listen only with no Ad Hoc Mode capability Access point capability 2412-2462 5745-5825 5755-5795 5180-5240 5190-5230 5260-5320 5270-5310 5500-5700 5510-5670 probes) Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No

(3) Country code selection ability Yes No If no, pls explain how it was implemented:

Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No The user has not the right to change the country code once the tablet is sent out from the factory, and the manufacture will fix it.

(4) Meet 15.202 requirement Yes No pls check below :

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non- DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply

(If apply, pls help to provide explanation on it was implement, and how software was controlled) Does not apply