Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions
, Co., Ltd.
, and are trademarks or registered trademarks of Huawei Technologies Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED AS IS. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Contents Getting to Know the ME209U-526D................................................................................................. 1 Dimension .................................................................................................................................1 Position of RF Connectors ......................................................................................................2 Pin Definitions ..........................................................................................................................3 i Thank you for purchasing HUAWEI ME209U-526D LTE mini PCIE Module (hereinafter referred to as the ME209U-526D) Note:
This manual briefly describes the dimension, the position of RF connectors and Pin definitions. You are recommended to read the manual before using the ME209U-526D. Getting to Know the ME209U-526D Dimension The package of the mini PCIE module is 52 pin PCIE with a dimension of 51 mm 30.4 mm 3.4 mm. It is applied to the user interface board, and can be used as a wireless terminal in a network environment. 1 Position of RF Connectors The PCIE module provided three antenna connectors (MAIN_ANT, GPS_ANT and AUX_ANT) for connecting the external antennas. 2 Pin Definitions The sequence of mini-PCIE interface is shown below. 3 4 The Pin definitions of the Mini PCIE interface is shown below. Pin No. Pin Name Pad Type Description Para meter Min
.(V) Typ.(
V) Max
.(V) Mini PCI Express Standard Description HUAWEI Pin Description 1 WAKE#
WAKE#
O 2 3 4 5 6 7 8 3.3Vaux VCC_3V3 P COEX1 GND COEX2 1.5 V Reserved GND Reserved NC CLKREQ#
CLKREQ#
-
-
-
-
-
UIM_PWR USIM_PWR PO 5 Open collector active low signal. This signal is used to wake up the host. 3.3 V DC supply input. Reserved Ground Reserved Not connected Wake up in from host Power source for the external USIM card
-
-
-
-
-
-
-
0. 3
-
0.4 5 3.0 3.3 3.6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Class C Class B 0. 3 0. 3 1.8 1.9 8 2.85 3.3 Pin No. Pin Name Pad Type Description Para meter Min
.(V) Typ.(
V) Max
.(V) Mini PCI Express Standard Description HUAWEI Pin Description 9 GND GND
-
Ground 10 UIM_DATA USIM_DATA I/O 11 REFCLK-
NC 12 UIM_CLK USIM_CLK 13 REFCLK+
NC
-
O
-
14 UIM_RESET USIM_RESET O 15 16 17 18 19 GND UIM_Vpp Reserved GND Reserved GND NC Reserved GND Reserved
-
-
-
-
-
6 External USIM data signal Not connected External USIM clock signal Not connected External USIM reset signal Ground Not connected Reserved Ground Reserved
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1.8/
2.85
-
1.8/
2.85
-
1.8/
2.85
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Pin No. Pin Name Pad Type Description Para meter Min
.(V) Typ.(
V) Max
.(V) Mini PCI Express Standard Description HUAWEI Pin Description 20 W_DISABLE#
W_DISABLE#
I 21 22 GND PERST#
GND RESIN_N 23 PERn0 NC 24 3.3Vaux VCC_3V3
-
I
-
P 7 The W_DISABLE#
signal is an active low signal that when asserted
(driven low) by the system shall disable radio operation. The firmware with this feature is in plan. Ground Reset module Active-low Not connected 3.3 V DC supply input. V IL 0. 3 0 0.3 V IH 1.1 7 1.8 2.1
-
V IL V IH
-
-
-
0. 3 1.1 7
-
-
0
-
0.3 1.8 2.1
-
-
3.0 3.3 3.6 Pin No. Pin Name Pad Type Description Para meter Min
.(V) Typ.(
V) Max
.(V) Mini PCI Express Standard Description HUAWEI Pin Description 25 PERp0 26 27 28 29 30 GND GND 1.5 V GND SMB_CLK 31 PETn0 32 SMB_DATA 33 PETp0 GND GND 34 35 36 NC GND GND NC GND NC NC NC NC GND GND
-
-
-
-
-
-
-
-
-
-
-
Not connected Ground Ground Not connected Ground Not connected Not connected Not connected Not connected Ground Ground
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
USB_D-
USB_DM I/O USB signal D-
8 Pin No. Pin Name Pad Type Description Para meter Min
.(V) Typ.(
V) Max
.(V) Mini PCI Express Standard Description HUAWEI Pin Description 37 38 GND USB_D+
GND USB_DP 39 3.3Vaux VCC_3V3 40 41 GND 3.3Vaux GND VCC_3V3
-
I/O P
-
P 42 LED_WWAN#
LED_WWAN#
O 43 44 GND LED_WLAN#
GND NC 45 Reserved Reserved
-
-
-
9 Ground USB signal D+
3.3 V DC supply input. Ground 3.3 V DC supply input. Active-low LED signal indicating the state of the card. Ground Not connected
-
-
-
-
-
-
-
-
Reserved V OL V OH
-
-
-
-
-
-
3.0 3.3 3.6
-
-
-
3.0 3.3 3.6 0. 3
-
-
0. 3 1.3 5
-
-
-
0 0.4 5
-
-
0.4 5 1.8 2.1 Pin No. Pin Name Pad Type Description Para meter Min
.(V) Typ.(
V) Max
.(V) Mini PCI Express Standard Description HUAWEI Pin Description 46 LED_WPAN#
NC 47 Reserved Reserved 48 1.5 V NC 49 Reserved Reserved 50 51 GND Reserved GND Reserved
-
-
-
-
-
-
Not connected
-
-
Reserved V OL Not connected Reserved Ground Reserved V OH
-
V IL V IH
-
V OL V OH 0. 3 1.3 5
-
0. 3 1.1 7
-
0. 3 1.3 5
-
0
-
0.4 5 1.8 2.1
-
0
-
0.6 3 1.8 2.1
-
0
-
0.4 5 1.8 2.1 52 3.3Vaux VCC_3V3 P 3.3 V DC supply input.
-
3.0 3.3 3.6 10