FCC ID: QISAUM-L33 Smart Phone

by: Huawei Technologies Co.,Ltd latest update: 2018-06-04 model: AUM-L33

Four grants have been issued under this FCC ID on 06/04/2018 (this is one of three hundred and eighty-nine releases in 2018 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked warrantee terms, password defaults, instructions, troubleshooting guides, & drivers.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 37
1 ~ 2018-06-04 26
2 ~ 2018-06-04 8
3 ~ 2018-06-04 17
4 ~ 2018-06-04 19

app s				submitted / available
1 2 3 4	User Manual	Users Manual	pdf	1.45 MiB	April 06 2018
1 2 3 4		External Photos	pdf		April 06 2018
1 2 3 4		Cover Letter(s)	pdf		April 06 2018
1 2 3 4		Cover Letter(s)	pdf		April 06 2018
1 2 3 4		Internal Photos	pdf		April 06 2018
1 2 3 4		ID Label/Location Info	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		RF Exposure Info	pdf		April 06 2018
1 2 3 4		RF Exposure Info	pdf		April 06 2018
1 2 3 4		RF Exposure Info	pdf		April 06 2018
1 2 3 4		RF Exposure Info	pdf		April 06 2018
1 2 3 4		RF Exposure Info	pdf		April 06 2018
1 2 3 4		Test Setup Photos	pdf		April 06 2018
1 2 3 4		Test Setup Photos	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Cover Letter(s)	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		RF Exposure Info	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018
1 2 3 4		Test Report	pdf		April 06 2018

exhibit
download
text

1 2 3 4

User Manual

Users Manual

pdf

1.45 MiB

April 06 2018

Quick Start Guide AUM-L33 TUV Your Device at a Glance Before you start, let's take a look at your new device. l To power on your device, press and hold the power button until the screen turns on. l To power off your device, press and hold the power button, and then touch

. l To restart your device, press and hold the power button, and then touch

. l Press and hold the power button for 10 or more seconds to forcibly restart your device. Rear camera Status indicator Card tray Primary microphone Speaker Volume button 1 Fingerprint scanner Infrared sensor Front camera Micro-USB port Power button Earpiece 12345687910151413121116 TUV Smart Selfie Butterflighting Secondary microphone Flash Headset jack 2 TUV Getting Started l Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device. l Be careful not to scratch your device or hurt yourself when using the eject pin. l Store the eject pin out of the reach of children to prevent accidental swallowing or injury. l Do not use cut or modified SIM or microSD cards with your device as these may not be recognized and could damage the card tray (slot). Follow the instructions in the following figures to set up your device. Please use the eject pin included. Dual-SIM:

3 TUV Dual Card Dual Standby Single Pass (dual-SIM devices only) Your device supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls or data services simultaneously. l When you are on a call using SIM card 1, SIM card 2 cannot be used to make or answer calls. If someone calls SIM card 2, the caller will hear a voice message similar to "The subscriber you dialed is out of the service area" or "The subscriber you dialed cannot be connected for the moment, please try again later." The actual message will vary by service provider. l When you are using SIM card 1's data service, SIM card 2's data service will be disabled. Your device's single pass feature helps reduce power consumption and increase your device's standby time. It is not related to your service provider's network conditions. You can go to Settings > Wireless & networks > Dual SIM settings, and enable Enable call forwarding between SIMs to avoid the conflicts mentioned above. 4 TUV For More Information If you encounter any problems while using your device, you can obtain help from the following resources:

Go to Tips for function details and usage tips. Visit http://consumer.huawei.com/en to view device information, frequently asked questions and other information. Visit http://consumer.huawei.com/en/support for the most up-to-date contact information for your country or region. Go to Settings and touch System > About phone > Legal to view legal information for your product. Go to Settings and touch System > About phone > Legal >

Safety information to view safety information for your product. Go to Settings and touch System > About phone >

Authentication info to view regulatory information for your product. Go to Settings and touch System >

view more information on logos for your product. logos to All pictures and illustrations in this guide, including but not limited to the product color, size, and display content, are for your reference only. The actual product may vary. Nothing in this guide constitutes a warranty of any kind, express or implied. 5 TUV Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety l To prevent possible hearing damage, do not listen at high volume levels for long periods. l Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. Ideal operating temperatures are 0 C to 35 C. Ideal storage temperatures are -20 C to +45 C. l l Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. l Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. l Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. l While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. l To prevent damage to your device's parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields. l When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. l Unplug the charger from electrical outlets and the device when not in use. l Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or 6 TUV chemical plant, for example). Using your device in these environments increases the risk of explosion or Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to explosion, or other hazards. FCC Regulatory Compliance Body worn operation when used near The device complies with RF your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using it at the ear is ATU-LX3 0.47 W/kg And when properly worn on the body is ATU-LX3 0.75 W/kg And when using the Wi-Fi hotspot function is 1.03 W/kg ATU-LX3 FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

7 TUV --Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. to this device not Caution: Any changes or expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment. 8 TUV Legal Notice Trademarks and Permissions

, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Android is a trademark of Google Inc. LTE is a trademark of ETSI. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-Fi, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance. Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://

consumer.huawei.com/privacy-policy. Copyright Huawei Technologies Co., Ltd. 2018. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES. 9 TUV 9672XXXX_01 TUV

		frequency	equipment class	purpose
1	2018-06-04	2510 ~ 2560	PCE - PCS Licensed Transmitter held to ear	Original Equipment
2			JBP - Part 15 Class B Computing Device Peripheral
3		2402 ~ 2480	DSS - Part 15 Spread Spectrum Transmitter
4		2412 ~ 2462	DTS - Digital Transmission System

Application Forms

app s	Applicant Information
1 2 3 4	Effective	2018-06-04
1 2 3 4	Applicant's complete, legal business name	Huawei Technologies Co.,Ltd
1 2 3 4	FCC Registration Number (FRN)	0003748860
1 2 3 4	Physical Address	Administration Building, Headquarters of Huawei
1 2 3 4		Shenzhen, N/A
1 2 3 4		China

app s	TCB Information
1 2 3 4	TCB Application Email Address	v******@tuvam.com
1 2 3 4	TCB Scope	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
1 2 3 4		A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
1 2 3 4		A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2 3 4	Grantee Code	QIS
1 2 3 4	Equipment Product Code	AUM-L33

app s	Person at the applicant's address to receive grant or for contact
1 2 3 4	Name	Z** X**
1 2 3 4	Telephone Number	+86-7********
1 2 3 4	Fax Number	+86-7********
1 2 3 4	E-mail	z******@huawei.com

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2 3 4	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3 4	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3 4	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	08/25/2018
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4	Is this application for software defined/cognitive radio authorization?	No
1 2 3 4	Equipment Class	PCE - PCS Licensed Transmitter held to ear
1 2 3 4		JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4		DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4		DTS - Digital Transmission System
1 2 3 4	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	Smart Phone
1 2 3 4	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2 3 4	Modular Equipment Type	Does not apply
1 2 3 4	Purpose / Application is for	Original Equipment
1 2 3 4	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2 3 4	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2 3 4	Grant Comments	Output power is ERP for f < 1 GHz, and EIRP for f > 1 GHz. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1.5cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, wireless router, simultaneous transmission and extremity use conditions are 0.30 W/kg, 0.75 W/kg, 1.03 W/kg and 1.11 W/kg respectively.
1 2 3 4		Output power is conducted. The highest reported SAR for head and simultaneous transmission use conditions are: 0.16 W/kg and 1.11 W/kg, respectively.
1 2 3 4		Output power is conducted. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1.5cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, wireless router and simultaneous transmission use conditions are: 0.47 W/kg, 0.11 W/kg, 0.29 W/kg and 1.11 W/kg, respectively.
1 2 3 4	Is there an equipment authorization waiver associated with this application?	No
1 2 3 4	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2 3 4	Firm Name	Global Compliance and Testing Center of Huawei Tec
1 2 3 4	Name	P****** Z******
1 2 3 4	Telephone Number	86-75********
1 2 3 4	E-mail	z******@huawei.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	22H		824.2	848.8	0.8337	17.43 Hz	243KGXW
1	2	22H		824.2	848.8	0.1368	17.79 Hz	248KG7W
1	3	22H		824.7	848.3	0.0975	2.26 Hz	1M09G7D
1	4	22H		824.7	848.3	0.0811	7.38 Hz	1M10W7D
1	5	22H		825.5	847.5	0.0995	13.75 Hz	2M71G7D
1	6	22H		825.5	847.5	0.0787	43.42 Hz	2M71W7D
1	7	22H		826.5	846.5	0.0951	15.99 Hz	4M52G7D
1	8	22H		826.5	846.5	0.074	14.61 Hz	4M51W7D
1	9	22H		829	844	0.1067	11.54 Hz	8M97G7D
1	1	22H		829	844	0.0824	10.37 Hz	8M98W7D
1	11	22H		826.4	846.6	0.1035	5.46 Hz	4M13F9W
1	12	27		1712.4	1752.6	0.2004	9.58 Hz	4M13F9W
1	13	24E		1850.2	1909.8	0.7621	12.01 Hz	246KGXW
1	14	24E		1850.2	1909.8	0.2023	17.11 Hz	249KG7W
1	15	24E		1852.4	1907.6	0.1178	6.68 Hz	4M13F9W
1	16	24E		1850.7	1909.3	0.1589	9.77 Hz	1M09G7D
1	17	24E		1850.7	1909.3	0.1343	4.84 Hz	1M10W7D
1	18	24E		1851.5	1908.5	0.1683	9.71 Hz	2M71G7D
1	19	24E		1851.5	1908.5	0.1309	7.93 Hz	2M71W7D
1	2	24E		1852.5	1907.5	0.1644	8.15 Hz	4M51G7D
1	21	24E		1852.5	1907.5	0.1291	8.18 Hz	4M51W7D
1	22	24E		1855	1905	0.1679	12.86 Hz	8M99G7D
1	23	24E		1855	1905	0.1358	7.93 Hz	8M98W7D
1	24	24E		1857.5	1902.5	0.1702	8.05 Hz	13M5G7D
1	25	24E		1857.5	1902.5	0.1291	12.15 Hz	13M4W7D
1	26	24E		1860	1900	0.1611	8.87 Hz	17M9G7D
1	27	24E		1860	1900	0.1365	8.51 Hz	17M9W7D
1	28	27		1710.7	1754.3	0.1694	7.01 Hz	1M09G7D
1	29	27		1710.7	1754.3	0.1387	6.29 Hz	1M10W7D
1	3	27		1711.5	1753.5	0.1714	53.73 Hz	2M71G7D
1	31	27		1711.5	1753.5	0.1352	14.46 Hz	2M71W7D
1	32	27		1712.5	1752.5	0.1687	29.57 Hz	4M52G7D
1	33	27		1712.5	1752.5	0.1393	16.57 Hz	4M52W7D
1	34	27		1715	1750	0.1854	15.55 Hz	8M98G7D
1	35	27		1715	1750	0.1321	23.73 Hz	8M99W7D
1	36	27		1717.5	1747.5	0.1742	16.68 Hz	13M5G7D
1	37	27		1717.5	1747.5	0.1358	10.33 Hz	13M5W7D
1	38	27		1720	1745	0.1923	11.76 Hz	17M9G7D
1	39	27		1720	1745	0.1611	3.72 Hz	17M9W7D
1	4	27		2502.5	2567.5	0.1476	4.42 Hz	4M52G7D
1	41	27		2502.5	2567.5	0.125	3.89 Hz	4M51W7D
1	42	27		2505	2565	0.1667	5.12 Hz	8M99G7D
1	43	27		2505	2565	0.1309	5.49 Hz	9M00W7D
1	44	27		2507.5	2562.5	0.1648	4.94 Hz	13M5G7D
1	45	27		2507.5	2562.5	0.1288	6.08 Hz	13M5W7D
1	46	27		2510	2560	0.1607	4.61 Hz	17M9G7D
1	47	27		2510	2560	0.13	5.68 Hz	17M9W7D
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15B	CC
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
3	1	15C	CC	2402.00000000	2480.00000000	0.0105000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
4	1	15C	CC	2412	2462	0.0558
4	2	15C	CC	2402	2480	0.0009

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details