FCC ID: QISELE-L04 Smart Phone

Quick Start Guide ELE-L09 ELE-L29 ELE-L04 Know Your Device Before using the device, familiarize yourself with its basic operations. l To power on your device, press and hold the power button until the screen turns on. l To power off your device, press and hold the power button, and then touch

. l To restart your device, press and hold the power button, and then touch

. l Press and hold the power button for 10 or more seconds to forcibly restart your device. Volume button Type-C port In-screen fingerprint Power button Headset jack Card slot l Please keep the NFC area close to other devices or objects while using the NFC function. l Check out the pre-installed Tips app and master all the great features on your device. 1 NFC412653 Getting Started l Do not insert or remove the SIM card when your device is powered on. l Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device. l Be careful not to scratch your device or hurt yourself when using the eject pin. l Store the eject pin out of the reach of children to prevent accidental swallowing or injury. l Do not use cut or modified SIM or NM cards (nano memory cards) with your device as these may not be recognized and could damage the card tray (slot). l If your SIM card does not match your device, please contact your carrier. Follow the instructions in the following figures to set up your device. Please use the eject pin included. Insert the NM Card (nano memory card) into slot 2. If you do not have one, you can purchase it from any official Huawei store. Single-SIM:

Dual-SIM:

2 3nano-SIM 1NM Card21321nano-SIM 1nano-SIM 2NM Cardnano-SIM 1 Dual SIM Card Management

(dual-SIM devices only) Your device supports dual card dual standby. Under Settings >

Wireless & networks > Dual SIM settings, select the default mobile data card and calling card as needed. Dual 4G l If both of your SIM cards support 4G services, when one of them is active on a 4G voice call, you will be prompted to handle any new call to the other SIM card. Answering the new call will automatically end the active call. l The default mobile data SIM card can still be used for Internet surfing on a 4G network when the other card is on a 4G voice call. l Some of the aforementioned features may be unavailable in certain areas due to network interference. l 4G voice services require the support of your carrier's network and the deployment of relevant services. Contact your carrier to activate 4G services. l If this guide is inconsistent with the description on the official website, the latter prevails. 3 For More Information If you encounter any problems while using your device, you can obtain help from the following resources:

l Visit http://consumer.huawei.com/en to view device information, frequently asked questions and other information. l Visit http://consumer.huawei.com/en/support for the most up-to-date contact information for your country or region. Go to Settings and touch System > About phone > Legal to view legal information for your product. Go to Settings and touch System > About phone > Legal >

Safety information to view safety information for your product. Go to Settings and touch System > About phone >

Authentication info to view regulatory information for your product. Go to Settings and touch System > Certification logos to view more information on certification logos for your product. All pictures and illustrations in this guide, including but not limited to the device color, size, and display content, are for your reference only. The actual device may vary. Nothing in this guide constitutes a warranty of any kind, express or implied. 4 Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety l To prevent possible hearing damage, do not listen at high volume levels for long periods. l Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. Ideal operating temperatures are 0 C to 35 C. Ideal storage temperatures are -20 C to +45 C. l l Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. l Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. l Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. l While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. l To prevent damage to your device's parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields. l When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. l Unplug the charger from electrical outlets and the device when not in use. l Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or 5 chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. l Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. l This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact a Huawei authorized service center for a replacement. Disposal and recycling information The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment

(WEEE) and batteries according to local laws. Proper collection and recycling of your equipment helps ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer or household waste disposal service or visit the website http://

consumer.huawei.com/en/. Reduction of hazardous substances This device and its electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations. For declarations of conformity about REACH and 6 RoHS, please visit our web site http://consumer.huawei.com/

certification. EU regulatory conformance (only applies to ELE-

L09 / ELE-L29) Body worn operation The device complies with RF specifications when used near your ear or at a distance of 0.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. The highest SAR value reported for this device type when tested at the ear is ELE-L09 ELE-L29 0.33 W/kg 0.33 W/kg And when properly worn on the body is ELE-L09 ELE-L29 0.85 W/kg 0.85 W/kg Statement Hereby, Huawei Technologies Co., Ltd. declares that this device ELE-L09 / ELE-L29 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at http://consumer.huawei.com/

certification. This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network. Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund. Restrictions in the 5 GHz band:

According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), 7 Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden

(SE), the United Kingdom (UK), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. Frequency Bands and Power

(a) Frequency bands in which the radio equipment operates:

Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.

(b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard. The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows:

ELE-L09 ELE-L29 GSM900: 35 dBm, GSM1800: 32 dBm, WCDMA900/ 2100: 25.7 dBm, LTE Band 1/3/7/8/20/28/32/34/38/40: 25.7 dBm, Wi-Fi 2.4G: 20 dBm, Bluetooth: 20 dBm, Wi-Fi 5G:

5150-5250 MHz: 23 dBm, 5250-5350 MHz: 20 dBM5470-5725 MHz: 20 dBm, 5725-5850 MHz: 13 dBm, NFC: 42 dBuA/m at 10m GSM900: 35 dBm, GSM1800: 32 dBm, WCDMA900/ 2100: 25.7 dBm, LTE Band 1/3/7/8/20/28/32/34/38/40: 25.7 dBm, Wi-Fi 2.4G: 20 dBm, Bluetooth: 20 dBm, Wi-Fi 5G:

5150-5250 MHz: 23 dBm, 5250-5350 MHz: 20 dBm5470-5725 MHz: 20 dBm, 5725-5850 MHz: 13 dBm, NFC: 42 dBuA/m at 10m Accessories and Software Information Some accessories are optional in certain countries or regions. Optional accessories can be purchased from a licensed vendor as required. The following accessories are recommended:

Adapters: HW-050450X00,HW-050450X01 (X represents the different plug types used, which can be either C, U, J, E, B, A, I, R, Z or K, depending on your region) Batteries: HB436380ECW Earphones: MEND1632B580C00, 1311-3291-3.5mm-229, EMC309-001 The product software version is ELE-L09: 5.0.1.73

(SP2C432E73R1P6) / ELE-L29: 5.0.1.73 (SP2C432E73R1P6). Software updates will be released by the manufacturer to fix 8 bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules. All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user. For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at http://consumer.huawei.com/certification. FCC Regulatory Compliance Body worn operation The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using it at the ear is ELE-L09 ELE-L29 ELE-L04 0.53 W/kg 0.53 W/kg 0.53 W/kg And when properly worn on the body is ELE-L09 ELE-L29 ELE-L04 0.56 W/kg 0.56 W/kg 0.56 W/kg And when using the Wi-Fi hotspot function is ELE-L09 ELE-L29 ELE-L04 0.68 W/kg 0.68 W/kg 0.68 W/kg FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 9 protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment. Industry Canada compliance (only applies to ELE-

L04) Body worn operation The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. The highest SAR value reported to the IC for this device type when using it at the ear is ELE-L04 0.53 W/kg And when properly worn on the body is ELE-L04 IC Statement This device complies with CAN ICES-3 (B)/NMB-3(B). 0.56 W/kg 10 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Restrictions in the 5 GHz band:

Within the 5.15 to 5.25 GHz band, UNII devices will be restricted to indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite System

(MSS) operations. 11 Legal Notice Trademarks and Permissions

,

, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories. Android is a trademark of Google Inc. LTE is a trademark of ETSI. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-Fi, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://

consumer.huawei.com/privacy-policy. Copyright Huawei Technologies Co., Ltd. 2019. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES. 12 96725489_01

Label and Label Location of ELE-L04 ELE-L04 02_Label and Label Location V1.0 Detail of label product. Go to Settings and touch System > Certification logos to view more information on certification logos for your 02_Label and Label Location V1.0 02_Label and Label Location V1.0

Authority to Act as Agent Date: 27 March 2020 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Huawei Technologies Co.,Ltd / Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian Longgang District, Shenzhen 518129 P. R. China For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:

By Title

(Signature) EMC Laboratory Manager On behalf of

Huawei Technologies Co.,Ltd QF094234

(Company Name) Telephone

0086-0755-28970299 Zhang Xinghai

(Print Name) Page 1 of 1 Revision 0

Huawei Technologies Co., Ltd. Federal Communications Commission 5/8/2020 Oakland Mills Road Columbia MD 21046 Class 2 Permissive Change Letter To Whom It May Concern:

Pursuant to section 2.1043, We Huawei Technologies Co., Ltd. Hereby submit a request for class II permissive change to our product, FCC ID: QISELLE -L04 , Grant date: 03/27/2019 Description of the change:

1) upgrade software to support BT UHD function5 kinds of PHY, which are UHD 1M GFSK, UHD 2M GFSK, UHD 2M /4-DQPSK, UHD 4M /4-DQPSK, UHD 2M 8DQPSK, this setting is not accessible or could not be active by the user or any other third-party. the original application remain unchanged, applicable and Documents Resubmitted:

1) tune up 2) Operational Descriptions The other documents from representative after Class II Permissive change:

Sincerely, For and Behalf of:

Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 18_Confidentiality Letter V1.0

Huawei Technologies Co.,Ltd. QISELE-L04 Request for Confidentiality Federal Communications Commission Oakland Mills Road Columbia MD 21046 Subject:

FCC ID:

To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market.

In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2020/10/24 External Photos Internal Photos Test Setup Photos User Manual

It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards 18_Confidentiality Letter V1.0 Zhang Xinghai EMC Laboratory Manager E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 18_Confidentiality Letter V1.0

ELE-L04 is subscriber equipment in the GSM/WCDMA/LTE system. The Mobile Phone implements such functions as RF signal receiving/transmitting LTE/HSPA/UMTS and GSM/GPRS/EDGE protocol processing, voice, video MMS service, GPS, AGPS and WIFI etc. Externally it provides one micro SD card interface, earphone port (to provide voice service) and one SIM card interface. ELE-L04 is single SIM smart phone. It also provides Bluetooth module to synchronize data between a PC and the phone, or to use the built-in modem of the phone to access the Internet with a PC, or to exchange data with other Bluetooth devices. BT change note Item Before After BT Function Not support BT UHD function Support BT UHD function by upgrade software. BT UHD has 5 kinds of PHY, which are UHD 1M GFSK, UHD 2M GFSK, UHD 2M /4-DQPSK, UHD 4M

/4-DQPSK, UHD 2M 8DQPSK 2020-4-27

, 1 , 1 T U V

Huawei Technologies Co.,Ltd. QISELE-L04 Request for Confidentiality Federal Communications Commission Oakland Mills Road Columbia MD 21046 Subject:

FCC ID:

To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure KDB Inquiry Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market.

In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2019-08-27 External Photos Internal Photos Test Setup Photos User Manual

It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards 18_Confidentiality Letter V1.0 Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 18_Confidentiality Letter V1.0

Huawei Technologies Co.,Ltd. 2019-01-02 Federal Communications Commission Oakland Mills Road Columbia MD 21046 Subject: Electronic Label Letter FCC ID: QISELE-L04 To Whom It May Concern:

Pursuant to the provisions of KDB 784748 D02 e labeling v01, we hereby provide the following statement:

This device have a integrated display screen can present the required label information electronically

(e-label) in lieu of a physical label or nameplate. The end user can access the electronic label with three steps. The information of electronic label is programmed by Huawei, any cant be modified by any third party. If have any questions concerning the above, please contact the undersigned. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 23_Electronic Label Letter V1.0

Huawei Technologies Co.,Ltd. Federal Communications Commission 2019-03-05 Oakland Mills Road Columbia MD 21046 Class 2 Permissive Change Letter Pursuant to section 2.1043,We Huawei Technologies Co., Ltd. Hereby submit a request for class II permissive change to our product, FCC ID: QISELE-L04. The following documents from the original application remain unchanged, applicable and representative after Class II To whom it may concern:

Description of the change:

Only add one wireless charging protective case Documents Resubmitted:

Permissive change:

TCF 1) External Photos 2) Internal Photos 3) Operational Descriptions 4) Schmatic diagram for Wireless charging case 5) Block Diagram for wireless charger case 6) PCB Layout for wireless charger case 7) BOM part list for wireless charge case 8) User manual for wireless charge case Report:

Report No. SYBH(Z-EMC) 20190117024001-2 for JBP Report No. SYBH(Z-SAR) 20190117024001-2 for SAR Report No. SYBH(Z-RF)20190117024001-2002 for wifi 2.4G Report No. SYBH(Z-RF)20190117024001-2004 for BT LE Report No. SYBH(Z-RF)20190117024001-2003 for BT 21_Class 2 Permissive Change Letter V1.0 Report No. SYBH(Z-RF)20190117024001-2006 for NFC Report No. SYBH(Z-RF)20190117024001-2001 for RF Report No. HR/2019/1002403 for Wifi 5G Sincerely, For and Behalf of:

Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 21_Class 2 Permissive Change Letter V1.0