FCC ID: QISLYA-LX9 Smart Phone

Quick Start Guide LYA-L09 LYA-L29 LYA-L0C Know Your Device Before using the device, familiarize yourself with its basic operations. l To power on your device, press and hold the power button until the screen turns on. l To power off your device, press and hold the power button, and then touch

. l To restart your device, press and hold the power button, and then touch

. l Press and hold the power button for 10 or more seconds to forcibly restart your device. Volume button Card slot In-screen fingerprint Power button USB-C port / Headset jack Tips App l Please keep the NFC area close to other devices or objects while using the NFC function. l Check out the pre-installed Tips app and master all the great features on your device. 1 NFC123456 Getting Started l Do not insert or remove the SIM card when your device is powered on. l Ensure that the card is correctly aligned and its notch is first inserted into the card tray. l Be careful not to scratch your device or hurt yourself when using the eject pin. l Store the eject pin out of the reach of children to prevent accidental swallowing or injury. l Do not use cut or modified SIM or NM cards (nano memory cards) with your device as these may not be recognized and could damage the card tray (slot). l If your SIM card does not match your device, please contact your carrier. Follow the instructions in the following figures to set up your device. Please use the eject pin included. Insert the NM Card (nano memory card) into slot 2. If you do not have one, you can purchase it from any official Huawei store. Single-SIM:

Dual-SIM:

2 1212 Dual Card Dual Standby Single Pass (dual-SIM devices only) Your device supports only dual card dual standby single pass, which means you cannot use both SIM cards for calls or data services simultaneously. l When you are on a call using SIM card 1, SIM card 2 cannot be used to make or answer calls. If someone calls SIM card 2, the caller will hear a voice message similar to "The subscriber you dialed is out of the service area" or "The subscriber you dialed cannot be connected for the moment, please try again later." The actual message will vary by service provider. l When you are using SIM card 1's data service, SIM card 2's data service will be disabled. Your device's single pass feature helps reduce power consumption and increase your device's standby time. It is not related to your service provider's network conditions. l You can enable call forwarding between SIMs on the device to avoid missed calls. 3 For More Information If you encounter any problems while using your device, you can obtain help from the following resources:

l Visit http://consumer.huawei.com/en to view device information, frequently asked questions and other information. l Visit http://consumer.huawei.com/en/support for the most up-to-date contact information for your country or region. Go to Settings and touch System > About phone > Legal to view legal information for your product. Go to Settings and touch System > About phone > Legal >

Safety information to view safety information for your product. Go to Settings and touch System > About phone >

Authentication info to view regulatory information for your product. Go to Settings and touch System > Certification logos to view more information on certification logos for your product. All pictures and illustrations in this guide, including but not limited to the device color, size, and display content, are for your reference only. The actual device may vary. Nothing in this guide constitutes a warranty of any kind, express or implied. 4 Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety l To prevent possible hearing damage, do not listen at high volume levels for long periods. l Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. Ideal operating temperatures are 0 C to 35 C. Ideal storage temperatures are -20 C to +45 C. l l Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. l Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. l Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. l While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. l To prevent damage to your device's parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields. l When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. l Unplug the charger from electrical outlets and the device when not in use. l Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or 5 chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. l Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. l This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact a Huawei authorized service center for a replacement. l Your device has been tested in a controlled environment and certified to be splash, water, and dust resistant in specific situations (meets requirements of classification IP68 as described by the international standard IEC 60529). Splash, water, and dust resistance are not permanent conditions and resistance might decrease as a result of normal wear. Do not charge your device in wet conditions. Visit http://consumer.huawei.com/en/support for detailed description of this function. Disposal and recycling information The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment

(WEEE) and batteries according to local laws. Proper collection and recycling of your equipment helps ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer or household 6 waste disposal service or visit the website http://

consumer.huawei.com/en/. Reduction of hazardous substances This device and its electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations. For declarations of conformity about REACH and RoHS, please visit our web site http://consumer.huawei.com/

certification. EU regulatory conformance (only applies to LYA-

L09 / LYA-L29) Body worn operation The device complies with RF specifications when used near your ear or at a distance of 0.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. The highest SAR value reported for this device type when tested at the ear is LYA-L09 LYA-L29 0.40 W/kg 0.40 W/kg And when properly worn on the body is LYA-L09 LYA-L29 0.96 W/kg 0.96 W/kg Statement Hereby, Huawei Technologies Co., Ltd. declares that this device LYA-L09 / LYA-L29 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at http://consumer.huawei.com/

certification. This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network. Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund. 7 Restrictions in the 5 GHz band:

According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden

(SE), the United Kingdom (UK), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. Frequency Bands and Power

(a) Frequency bands in which the radio equipment operates:

Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.

(b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard. The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows:

LYA-L09 LYA-L29 GSM900: 35 dBm, GSM1800: 32 dBm, WCDMA900/ 2100: 25.7 dBm, LTE Band 1/3/7/8/20/28/32/34/38/40: 25.7 dBm, Wi-Fi 2.4G: 20 dBm, Bluetooth: 20 dBm, Wi-Fi 5G:

5150-5250 MHz: 23 dBm, 5250-5350: 20 dBM, 5470-5725 MHz: 20 dBm, 5725-5850 MHz:

13dBm, NFC: 42 dBuA/m at 10m. Wireless Power Charging: < 37.7 dBuA/m at 10m. GSM900: 35 dBm, GSM1800: 32 dBm, WCDMA900/ 2100: 25.7 dBm, LTE Band 1/3/7/8/20/28/32/34/38/40: 25.7 dBm, Wi-Fi 2.4G: 20 dBm, Bluetooth: 20 dBm, Wi-Fi 5G:

5150-5250 MHz: 23 dBm, 5250-5350: 20 dBM, 5470-5725 MHz: 20 dBm, 5725-5850 MHz:

13dBm, NFC: 42 dBuA/m at 10m. Wireless Power Charging: < 37.7 dBuA/m at 10m. 8 Accessories and Software Information Some accessories are optional in certain countries or regions. Optional accessories can be purchased from a licensed vendor as required. The following accessories are recommended:

Adapters: HW-100400X00 (X represents the different plug types used, which can be either C, U, J, E, B, A, I, R, Z or K, depending on your region) Batteries: HB486486ECW Earphones: MEND1632B729003,Windy-S, 1331-3301-6001-

TC-088, 630276 The product software version is LYA-L09:

9.0.0.82(C432E82R1P7) / LYA-L29: 9.0.0.82(C432E82R1P7). Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules. All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user. For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at http://consumer.huawei.com/certification. ErP Product Information (only applies to LYA-

L09 / LYA-L29) Huawei Technologies Co., Ltd. hereby declares that its products conform to the Energy-related Products Directive

(ErP) 2009/125/EC. For detailed ErP information and the user manuals required by Commission Regulation, please visit:

http://consumer.huawei.com/en/certification. FCC Regulatory Compliance Body worn operation The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). 9 The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using it at the ear is LYA-L09 LYA-L29 LYA-L0C 0.58 W/kg 0.58 W/kg 0.58 W/kg And when properly worn on the body is LYA-L09 LYA-L29 LYA-L0C 0.81 W/kg 0.81 W/kg 0.95 W/kg And when using the Wi-Fi hotspot function is 0.77 W/kg 0.77 W/kg 0.88 W/kg LYA-L09 LYA-L29 LYA-L0C FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 10 Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment. Industry Canada compliance Body worn operation The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. The highest SAR value reported to the IC for this device type when using it at the ear is LYA-L09 LYA-L29 LYA-L0C 0.57 W/kg 0.57 W/kg 0.56 W/kg And when properly worn on the body is 0.81 W/kg 0.81 W/kg 0.95 W/kg LYA-L09 LYA-L29 LYA-L0C IC Statement This device complies with CAN ICES-3 (B)/NMB-3(B). This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Restrictions in the 5 GHz band:

Within the 5.15 to 5.25 GHz band, UNII devices will be restricted to indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite System

(MSS) operations. 11 Legal Notice Trademarks and Permissions

,

, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories. Android is a trademark of Google Inc. LTE is a trademark of ETSI. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-Fi, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. The Qi logo is a trademark of Wireless Power Consortium. Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://

consumer.huawei.com/privacy-policy. Copyright Huawei Technologies Co., Ltd. 2018. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES. 12 96725192_01

Internal Photos of LYA-L29, LYA-L09 02_Internal Photos V1.0 CTC 02_Internal Photos V1.0 CTC

External Photos of LYA-L29, LYA-L09 Front:

01_External Photos V1.0 CTC Back:

01_External Photos V1.0 CTC Left Side:

01_External Photos V1.0 CTC Right Side:

01_External Photos V1.0 CTC Top:

Bottom:

01_External Photos V1.0 CTC

Huawei Technologies Co.,Ltd. Federal Communications Commission 2018-09-11 Oakland Mills Road Columbia MD 21046 Subject: Electronic Label Letter FCC ID: QISLYA-LX9 To Whom It May Concern:

Pursuant to the provisions of KDB 784748 D02 e labeling v01, we hereby provide the following statement:

This device have a integrated display screen can present the required label information electronically

(e-label) in lieu of a physical label or nameplate. The end user can access the electronic label with three steps. The information of electronic label is programmed by Huawei, any cant be modified by any third party. If have any questions concerning the above, please contact the undersigned. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 23_Electronic Label Letter V1.0 CTC

1.1.1 Label and Label Location of LYA-L29/LYA-L09 LYA-L29 02_Label and Label Location V1.0 CTC LYA-L09 Detail of label 02_Label and Label Location V1.0 CTC Go to Settings and touch System > Certification logos to view more information on certification logos for your product. 02_Label and Label Location V1.0 CTC

Huawei Technologies Co., Ltd. Federal Communications Commission 5/7/2020 Oakland Mills Road Columbia MD 21046 Class 2 Permissive Change Letter To Whom It May Concern:

Pursuant to section 2.1043, We Huawei Technologies Co., Ltd. Hereby submit a request for class II permissive change to our product, FCC ID: QISLYA-LX9, Grant date: 10/17/2018 Description of the change:

1) upgrade software to support BT UHD function5 kinds of PHY, which are UHD 1M GFSK, UHD 2M GFSK, UHD 2M /4-DQPSK, UHD 4M /4-DQPSK, UHD 2M 8DQPSK, this setting is not accessible or could not be active by the user or any other third-party. Documents Resubmitted:

The following documents from the original application remain unchanged, applicable and representative after Class II Permissive change:

1) tune up 2) Operational Descriptions Sincerely, For and Behalf of:

Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 18_Confidentiality Letter V1.0

Huawei Technologies Co.,Ltd. Request for Confidentiality Federal Communications Commission Oakland Mills Road Columbia MD 21046 Subject:

FCC ID: QISLYA-LX9 To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market.

In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2020/10/24 External Photos Internal Photos Test Setup Photos User Manual

It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards 18_Confidentiality Letter V1.0 Zhang Xinghai EMC Laboratory Manager E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 18_Confidentiality Letter V1.0

LYA-L29/LYA-L09 is a subscriber equipment in the GSM/WCDMA/LTE system. The Mobile Phone implements such functions as RF signal receiving/transmitting, LTE/HSPA/UMTS and GSM/GPRS/EDGE protocol processing, voice, video MMS service, GPS, Bluetooth, NFC, Wi-Fi and Wirelessly Charging etc. LYA-L29 is a dual SIM smart phone, and one of the SIM card interfaces could be used as HUAWEI nano SD card interface. LYA-L09 provides one USIM card interface and one HUAWEI Nano SD card interface. Externally it provides type C USB charging port, and the port could be used as the earphone port or data-transfer port. BT change note Item Before After BT Function Not support BT UHD function Support BT UHD function by upgrade software. BT UHD has 5 kinds of PHY, which are UHD 1M GFSK, UHD 2M GFSK, UHD 2M /4-DQPSK, UHD 4M

/4-DQPSK, UHD 2M 8DQPSK 2020-4-29

, 1 , 1 C T C

Difference Declaration letter 1 Equipment Specification LYA-L29, LYA-L09 is subscriber equipment in the GSM/WCDMA/LTE system. The GSM frequency band includes GSM850 and GSM900 and DCS1800 and PCS1900.The UMTS frequency band is B1 and B2 and B4 and B5 and B6 and B8 and B19. The LTE frequency band is B1 and B2 and B3 and B4 and B5 and B6 and B7 and B8 and B9 and B12 and B17and B18 and B19 and B20 and B26 and B28 and B32 and B34 and B38 and B39 and B40 and B41. The Mobile Phone implements such functions as RF signal receiving/transmitting, LTE/HSPA/UMTS and GSM/GPRS/EDGE protocol processing, voice, video MMS service, GPS, Bluetooth, NFC, Wi-Fi and Wirelessly Charging etc. LYA-L29 is a dual SIM smart phone, and one of the SIM card interfaces could be used as HUAWEI Nano SD card interface. LYA-L09 provides one USIM card interface and one HUAWEI Nano SD card interface. Externally it provides type C USB charging port, and the port could be used as the earphone port or data-transfer port. 2 Change description Add downlink carrier aggregation: CA_4A-28A, CA_4A-5A, CA_2A-28A, CA_2A-5A, and CA_4A-7A;

Delete downlink carrier aggregation: CA_3A-26A, 1 CA_1A-3A-26A, CA_8A-39A CA_8A-40A, CA_8A-41A, and 39 CA_39A-41A, CA_39C-41A, CA_39A-41C, CA_39C-41C, CA_39A-41D. Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. 2018-10-22

, 1 , 2 CTC E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 2018-10-22

, 2 , 2 CTC

Huawei Technologies Co.,Ltd. Federal Communications Commission 2018-09-11 Oakland Mills Road Columbia MD 21046 Letter of Authorization To whom it may concern:

We the undersigned, hereby authorize CTC advanced to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CTC advanced on our behalf shall have the same affect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. Sincerely, For and Behalf of:

Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 20_Authorization Letter V1.0 CTC

Huawei Technologies Co.,Ltd. Federal Communications Commission Oakland Mills Road Columbia MD 21046 Subject:

Request for Confidentiality FCC ID:

QISLYA-LX9 To Whom It May Concern:

2018-10-23 Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure KDB Inquiry Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market.

*****************************************************************************

In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2019-01-16 External Photos Internal Photos Test Setup Photos User Manual

******************************************************************************

It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards 18_Confidentiality Letter V1.0 Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226 18_Confidentiality Letter V1.0

Huawei Technologies Co.,Ltd. Statement for 2.4G Wi-FiTM QISLYA-LX9 Federal Communications Commission 2018-09-11 Oakland Mills Road Columbia MD 21046 Subject:

FCC ID:

To Whom It May Concern:

We, Huawei Technologies Co., Ltd., states that our product---LYA-L29/LYA-L09 comply with the requirement in KDB 594280 D01 Software Configuration Control v02r01. For 2.4G Wi-Fi part, only support channels 1-11, the channel 12 and channel 13 are disabled by software in the factory, this setting is not accessible and cant active by the user or any other third-party. If have any questions concerning the above, please contact the undersigned. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: zhangxinghai@huawei.com Tel: 0086-0755-28970299 Fax: 0086-0755-89650226

**Wi-Fi is a trademark of Wi-Fi Alliance 26_2.4G Wi-Fi Declaration Letter V1.0 CTC