| submitted | available | document details (if available) | source link |
|---|---|---|---|
| May 19 2016 | May 19 2016 | Microsoft Word - WF75RL1510C_2.1_160106.doc Administrator Acrobat Distiller 7.0 (Windows) |
| various | Users Manual | Users Manual | 473.61 KiB | May 19 2016 |
PRODUCT SPECIFICATION Version 2.1 IEEE 802.11 b/g/n 1T1R USB Module Model Number:WF75RL1510C P/N: 07-MT7601-MA0G CMIIT ID:2014DP6213 2.4G channel 1-13
( Media Tek MT7601U ) Custom Name Department Approval Custom Approval Section Date DESIGN 20151210 CHECK 20151210 APPROVAL 20151210 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 75 HUA YU RD., NO.75, ZHONGKAI HIGH-TECH DEVELOPMENT AREA, HUIZHOU, CHINA TEL07522096628 E-mail gaoz@gaosd.cn PRODUCTS SPECIFICATION WF75RL1510C Document revision history Rev. Date Author Reason for Changes Version 1.0 2014-09-03 Version 1.1 2014-09-16 Version 1.2 2014-12-18 Version 1.3 2015-01-27 Version 1.4 2015-09-20 Version 2.0 2015-12-10 Version 2.1 2016-01-06 Draft Adding shield cover Adding P/N No. Adding CMIIT ID Update the label info Edited 11b frequency range PowerEN edited GI edited+ FCC Statement page 2 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 1. Brief Description This document is to specify the product requirements for 802.11 b/g/n USB Module. This Module is based on Media Tek MT7601U chipset that complied with IEEE 802.11g, IEEE 802.11b, IEEE 802.11n standard from 2.4G-2.5GHz,and it can be used to provide up to 54Mbps for 802.11g,11Mbps for 802.11b and 150Mbps for 802.11n to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11b/g/n USB Module offers absolute interoperability with different vendors 802.11 b, 802.11 g, 802.11n Access Points through the wireless LAN. 2. Features Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate. Compatible with IEEE 802.11n standard to provide wireless 150Mbps data rate.
Operation at 2.4G-2.5GHz frequency band to meet worldwide regulations
Supports WEP ,WPA ,WPA2,TKIP,AES enhanced security
Drivers support Windows XP 32/64, 2000, 7,Vista 32/64, linux 0S
High speed USB 2.0 interface ROHS compliant page 3 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 3. Application Diagrams 3.1 Functional Block Diagram 3.2 General Requirements 3.2.1 IEEE 802.11b Section 3.2.1.1 3.2.1.2 3.2.1.3 Feature Standard Radio and Modulation Schemes Operating Frequency Detailed Description IEEE 802.11b DQPSK , DBPSK , DSSS , and CCK 2400 2483.5MHz ISM band 11 channels for United States 13 channels for Europe Countries 14 channels for Japan 11,5.5,2,and 1Mbps CSMA/CA with ACK Typical RF Output Power at each RF chain,Data Rate and at room Temp. 25degree C 17dBm(2dB) at 1,2,5.5,11Mbps page 4 of 12 Version 2.1 3.2.1.4 Channel Numbers 3.2.1.5 3.2.1.6 Media Access Data Rate Protocol Transmitter Output Power at Antenna Connector 3.2.1.7 PRODUCTS SPECIFICATION WF75RL1510C 3.2.1.8 Receiver Sensitivity at Antenna Connector Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=8%
-76 dBm at 2Mbps
-76 dBm for 11Mbps 3.2.2 IEEE 802.11g Section 3.2.2.1 3.2.2.2 3.2.2.3 Feature Standard Radio and Modulation Type Operating Frequency 3.2.2.4 Channel Numbers 3.2.2.5 3.2.2.6 Media Access Data Rate Protocol 3.2.2.7 Transmitter Output Power at Antenna Connector 3.2.2.8 Receiver Sensitivity at Antenna Connector 3.2.3 IEEE 802.11n Section 3.2.3.1 3.2.3.2 3.2.3.3 Feature Standard Radio and Modulation Type Operating Frequency 3.2.3.4 Data Rate(Mbps) Detailed Description IEEE 802.11g QPSK , BPSK , 16QAM ,64QAM with OFDM 2400 2483.5MHz ISM band 11 channels for United States 13 channels for Europe Countries 13 channels for Japan 6,9,12,18,24,36,48,54Mbps CSMA/CA with ACK Typical RF Output Power(tolerance2dB) at each RF chain, Data Rate and at roomTemp. 25degree C
+17 dBm at 6,9Mbps
+16 dBm at 12,18Mbps
+15 dBm at 24,36Mbps
+14 dBm at 48,54Mbps Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25 degree C
-82 dBm at 6Mbps
-81 dBm at 9Mbps
-79 dBm at 12Mbps
-77 dBm at 18Mbps
-74 dBm at 24Mbps
-70 dBm at 36Mbps
-66 dBm at 48Mbps
-65 dBm at 54Mbps Detailed Description IEEE 802.11n BPSK , QPSK , 16QAM ,64QAM with OFDM 2400 2483.5MHz page 5 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C MCS 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 GI=800ns 20MHz 6.5 13 19.5 26 39 52 58.5 65 13 26 39 52 78 104 117 130 40MH 13.5 27 40.5 54 81 108 121.5 135 27 54 81 108 162 216 243 270 GI=400ns 20MHz 7.2 14.4 21.7 28.9 43.3 57.8 65.0 72.2 14.444 28.889 43.333 57.778 86.667 115.556 130.000 144.444 40MHz 15 30 45 60 90 120 135 150 30 60 90 120 180 240 170 300 3.2.3.5 Media Access 3.2.3.6 Protocol Transmitter Output Power at Antenna Connector 3.2.3.7 Receiver Sensitivity at Antenna Connector CSMA/CA with ACK Typical RF Output Power(tolerance2dB) at each RF chain,Data Rate and at roomTemp. 25degree C HT-20 142dBm at MCS0~15 HT-40 142dBm at MCS0~15 Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate=10%
and at roomTemp. 25degree C HT-20
-82dBm at MCS0/8
-79dBm at MCS1/9
-77dBm at MCS2/10
-74dBm at MCS3/11
-70dBm at MCS4/12
-66dBm at MCS5/13
-65dBm at MCS6/14
-64dBm at MCS7/15 HT-40
-79dBm at MCS0/8
-76dBm at MCS1/9
-74dBm at MCS2/10
-71dBm at MCS3/11
-67dBm at MCS4/12
-63dBm at MCS5/13
-62dBm at MCS6/14
-61dBm at MCS7/15 page 6 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 4. Electrical and Thermal Characteristics 4.1 Temperature Limit Ratings Parameter Storage Temperature Ambient Operating Temperature Junction Temperature 4.2 General Section Units C C C
+80 60 125
-40 0 0 Maximum Minimum Detailed Description Integrated antenna 5.0V10%
230mA at continuous transmit mode 190mA at receive mode w/o receiving packet High Speed USB2.0 Interface Windows XP 32/64, 2000, 7,Vista 32/64, linux 0S WEP ,WPA ,WPA2,TKIP,AES Feature Antenna Type Operating Voltage Current Consumption USB 5.2.1 5.2.2 5.2.3 5.2.4 4.3 Software Requirements Driver Security 4.3.1 Information 4.3.1.1 Feature General Information 4.3.1.2 4.3.1.3 Current Link Information Site survey Detailed Description General Information shows the name of Wireless Adapter,Adapter MAC Address,Regulatory Domain,Firmware Version,and Utility Version. Current Link Information shows the C To search the neighboring access points and display the information of all access points. page 7 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 4.3.2 Mechanical Requirements Feature Length 4.3.2.1 4.3.2.2 Width 4.3.2.3 Height 4.3.3 Environmental Requirements 4.3.3.1 Feature Operating Temperature Conditions The product is capable of continuous reliable operation when operating Detailed Description 36mm(PCB) 22mm(PCB) 1.0mm(PCB) Detailed Description in ambient temperature of 0C to + 45C . Neither subassemblies is damaged nor the operational performance is degraded when restored to the operating temperature after exposing to storage temperature in the range of -20C to + 75C . The product is capable of continuous reliable operation when subjected to relative humidity in the range of 10% and 90% non-condensing. The product is not damaged nor the performance is degraded after exposure to relative humidity ranging from 5% to 95% non-condensing 4.3.3.2 Non-Operating Temperature Conditions 4.3.3.3 Operating Humidity conditions Non-Operating Humidity Conditions 4.3.3.4 page 8 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 5 Connector Definition 15-Pin 1.25mm connectorHorizontal Type Pin 1 Definition Power-en 2 GND 3 D+
4 D-
5 Vcc
`
*TLERANCES ARE +/-0.5mm UNLESS OTHERWISE SPECIFIED
*UNIT:mm page 9 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C Appendix 1 : Schematic D N G D N G 2 4 3 C 1 F p 7 4 D N G D N G 12 2
. 5 x 3 5
. 2U 43 z H M 0 4
/
L A T X 0 _ O X m1 h o 0 9 R 2 I X O X N _ T S R D V 3
. 3 K 0 5 1 7 R 6 1 C F u 1
. 0 1 2 1 2 D N G D V 3
. 3 1 D V 3
. 3 N _ T S R F u 1
. 0 2 1 C D N 2 G 0 3 9 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 I 1 O P G _ L W I 2 O P G _ L W I 3 O P G _ L W I 4 O P G _ L W I 5 O P G _ L W I 6 O P G _ L W P M O C E S A H P N _ T S R _ O D L D 3 3 V _ C D C D D N G 31 32 33 34 35 36 37 38 39 40 F1 u 1
. 0 4 2 C 2 1.2VD 3.3VD 1.2VD PMU_OUT 1 3 C F u 1 XO XI 1 XTAL_V12A 3.3VD WL_GPIO0 VDD VCCIO AVDD12 ADC_VX_LDO XTAL_XO XTAL_XI XTAL_V12A PLL_VX_LDO BG_EXTR D N G D N G D N G D N G F u 1
. 0 8 2 C 1 1 2 F u 1
. 0 9 2 C 2 2 F 1 0 3 C u 1
. 0 D N 2G 1 2 2 3 C F u 1
. 0 D N G 1 2 GND 41 1 C I D N G O D L _ X V _ 0 F R I N _ 0 F R A 3 3 V _ 2 A P _ 0 F R A 3 3 V _ 1 A P _ 0 F R P T U O _ 0 F R N T U O _ 0 F R 8 R K 4 2 1 2 3 4 5 6 7 8 9 0 1 D V 3
. 3 1 F u 5 1 2 C 2 D N G 3 R R 0 D V 3
. 3 1 D V 3
. 3 N T U O _ A P _ 0 F R P T U O _ A P _ 0 F R 2 6 2 C F u 1 2 1 C 1 F u 1
. 0 F p 0
. 1 8 1 C D V 3
. 3 F u 1
. 0 7 C 1 2 D N G K 2
. 8 5 R 1 2 D N G F u 1
. 0 2 0 1 C 1 D N G P D U M D U 5 X 5
-
0 4 N F Q
-
1 0 6 7 T M 8 C 1 F u 1 2 D N G 3.3VD PMU_OUT 1.2VD VRES 3.3VD FB DCDC_V33A LDO_V15A VOUT_1P2 VRES VDDA PADM PADP VDD EEFL_CS 20 19 18 17 16 15 14 13 12 11 I O S M _ E E I S O M _ E E K L C _ E E I O C C V F u 2
. 2 6 C 1 2 D N G UDM UDP 5 C 1 F u 1 2 D N G D V 3
. 3 F u 1
. 0 2 4 1 C 1 D N G D V 2
. 1 D N G 2 P T U O _ A P _ 0 F R F1 p 0 1 7 1 C H n 7
. 2 4 V L
+
T 2 U O _ 0 A P 1 D N G 2 D V 3
. 3 D N G 1 N T U O _ A P _ 0 F R F1 p 0 1 9 1 C
-
T 2 U O _ 0 A P 1 1 2 C 1 F p 2
. 1 2 D N G D V 5 2 F p 6
. 5 1 4 C F p 6
. 5 2 4 C D N G 2 1 2 1 D N G 2 H1 n 8 1 7 V L 2 1
-
+ U U H n 8 1 8 V L D N G D V 5 F u 0 1 3 C D V 3
. 3 GND D N G D V 3
. 3 2 H u 7
. 4 1 V L 1 D V 5 3 2 1 N E D N G W S X L
/
N V I B F 1 Q 4 5 N E
-
r e w o P 8 2 7 5 G D N G GND D N G 4 C F u 1
. 0 F p 0 0 1 3 4 C 2 1 B F K 2 8 4 R K 8 1 3 R D N G V 3
. 3
=
) K 8 1
/
K 2 8
+
1
(
*
6
. 0
=
) 4 R
/
3 R
+
1
(
*
6
. 0
=
o V D V 5 D N G GND 1 1 C F u 1 0 2 C 1 F p 2
. 1 2 0 G _ T U O 7 2 F C R 1 2 5 V L H n 1 1 6 3 C 1 8 3 C 3 3 C F p 5
. 0 H n 7
. 2 3 V L 2 F p 0
. 1 D N 2 G F p 0
. 1 F p 0 1 D N 2 G 0 2 0 1 R 1 2 1 1 R 0 1 A N N E T N A H n 2
. 2 6 V L 2 1 D N G K 0 0 1 2 R 1 K 0 5 1 1 R 2 D N G 1 3 1 C 1 F u 1 2 D N G N E
-
r e w o P D V 5 345 12 1 Y page 10 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C Appendix 2 : SMT connector page 11 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C Appendix 3 : Top & Bottom vertical view Connector view:
page 12 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. The devices must be installed and used in strict accordance with the manufacturers instructions as described in the user documentation that comes with the product. Modular could be only used in mobile or fix device, and could not be used in any portable device. The module must be installed in TV set. In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Regulation information
(1) This device and its antenna(s) must not be co-located or operating in conjunction with any other page 13 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C antenna or transmitter.
(2) This compliance to FCC radiation exposure limits for an uncontrolled environment, and minimum of 20cm separation between antenna and body. The end product must carry a label stating Contains TX FCC ID: 2AC23-WF75RL1510C . page 14 of 12 Version 2.1
This product uses the FCC Data API but is not endorsed or certified by the FCC