Hui Zhou Gaoshengda Technology Co., LTD WCTA1M2501 WIFI Module IEEE 802.11 a/b/g/n/ac 2T/2R Model Number: WCTA1M2501 Product Descrition The WCTA1M2501 is a complete dual-band(2.4GHz and 5GHz)WIFI 22 MIMO module. This module provides a high level of integration with a dual-stream IEEE 802.11ac MAC/ base band /radio and Bluetooth 5.0.The WLAN operation supports 20MHz,40MHz and 80MHz channels for data rates up to 866.7Mbps. It fully complies with IEEE 802.11 a/b/g/n/ac feature rich wireless connectivity at high standards,delivers reliable,cost-effective, throughput from an extended distance. Product Features Complies with IEEE 802.11b/g/n for 2.4GHz and IEEE 802.11a/n/ac 5GHz Wireless LAN. Bluetooth v5.0 Two transmit and Two receive path(2T2R) Works with all existing network nfrastructure. Capable of up to 128-Bit WEP Encryption. Freedom to roam while staying connected. UP to 866.7 Mbps High-Speed Transfer Rate in 802.11ac mode of operation. Operating SystemsLinux,Win7, Win8, Win10,XP Low power consumption. Easy to install and configure. High speed USB 2.0 interface Product Specification Model WIF+BT Module Product Name WCTA1M2501 Standard Interface 802.11 a /b/g/n/ac USB Data Transfer Rate 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 866.7Mbps Modulation Method Frequency Band Operation Mode GFSK,/4-DQPSK,8DPSK(bluetooth) DQPSK,DBPSK,CCK(802.11b) QPSK,BPSK,16QAM,64QAM with OFDM (802.11g) QPSK,BPSK,16QAM,64QAM with OFDM (802.11n) QPSK,BPSK,16QAM,64QAM with OFDM (802.11a) QPSK,BPSK,16QAM,64QAM,256QAM with OFDM (802.11ac) BLUETOOTH 2402~2480 MHz WIFI 2.4G: 2412~2472 MHz 5G: 5180 MHz -5240 MHz, 5260 MHz -5320 MHz, 5500 MHz -5700 MHz, 5745 MHz -5825 MHz Infrastructure Security WEP, TKIP, AES, WPA, WPA2 Operating Voltage 3.3V10%
Current Consumption 1000mA Antenna Type PCB Operating Temperature 0 ~ 60C ambient temperature Storage Temperature
-40 ~ 80C ambient temperature Humidity 5 to 95 % maximum (non-condensing) NOTICE:
please keep this product and accessories attached to the places which children can't touch;
PAGE 1 OF 4 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD WCTA1M2501 do not splash water or other liquid onto this product, otherwise it may cause damage;
do not put this product near the heat source or direct sunlight, otherwise it may cause deformation or malfunction;
please keep this product away from flammable or naked flame;
please do not repair this product by yourself. Only qualified personnel can be repaired. FCC Statement FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 and FCC CFR Title 47 Part 15 Subpart E Section15.407: 2016 FCC Regulatory Compliance:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. If power exceeds the limit and the distance(Over 20cm distance in actual use between the device and user) is compliance with the requirement. RF Exposure Compliance:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Notice to OEM integrator If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. The end product shall haves the words Contains Transmitter Module FCC ID: 2AC23-WCTA1. The device must be professionally installed. The intended use is generally not for the general public. It is generally for industry/commercial use. The connector is within the transmitter enclosure and can only be accessed by disassembly of the transmitter that is not normally required. The user has no access to the connector. Installation must be controlled. Installation requires special training. Any company of the host device which installs this modular with unlimited modular approval should perform the test of radiated & conducted emission and spurious emission, etc. according to FCC part 15C: 15.247 and15.209 & 15.207, 15B Class B requirement, only if the tests result comply with FCC part 15C: 15.247 and 15.209 & 15.207, 15B Class B requirement, then the host can be sole legally. PAGE 2 OF 4 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD WCTA1M2501 When the module is installed inside another device, the user manual of the hose contain below 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation Antennas:
5G 2.4G PCB Antenna & 3 dBi PCB Antenna & 4 dBi The antenna is permanently attached, cant be replaced. BT PCB Antenna & 1 dBi Canada Statement RSS-Gen Issue 5, RSS-247 Issue 2 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic DevelopmentCanadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences etDveloppement conomique Canada. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pasproduire de brouillage,et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme auxCNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
1)L'appareil ne doit pas produire de brouillage;
2)L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre lefonctionnement. Please notice that if the ISED certification number is not visible when the module is installed inside another device, then theoutside of the device into which the module is installed o display a label referring to the enclosed module. This exteriorlabel can use wording such as the following:
Contains IC: 12290A-WCTA1 any similar wording that expresses the same meaningmay be used. l'appareil hte doit porter une tiquette donnant le numro de certification du module d'Industrie Canada, prcd des mots Contient un module d'mission , du mot IC: 12290A-WCTA1 ou d'une formulation similaireexprimant le mme sens, comme suit. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 andcompliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 etla conformit l'expositionde RSS-102 rf, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter. This equipment should be installed and operated with a minimum distance of 20centimeters between the radiator and your body. PAGE 3 OF 4 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD WCTA1M2501 Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne oumetteur. Cet quipementdevrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. B1 for indoor use only B1 pour usage intrieur uniquement This radio transmitter IC: 12290A-WCTA1 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Antennas:
2.4G PCB Antenna & 3 dBi BT PCB Antenna & 1 dBi 5G PCB Antenna & 4 dBi The antenna is permanently attached, cant be replaced. Please notice that if the ISED certification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains IC:12290A-WCTA1 any similar wording that expresses the same meaning may be used. l'appareil hte doit porter une tiquette donnant le numro de certification du module d'Industrie Canada, prcd des mots Contient un module d'mission , du mot IC:12290A-WCTA1 ou d'une formulation similaire exprimant le mme sens, comme suit The device for operation in the band 5180-5240 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5745-5820 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate;
Les dispositifs fonctionnant dans la bande 5180-5240 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 745 5 820 MHz) doit tre conforme la limite de la p.i.r.e. spcifie, selon le cas;
Frequency bands 5470-5600 MHz and 5650-5725 MHz Until further notice, devices subject to thissectionshall not be capable of transmitting in the band 5600-5650 MHz. This restriction is for the protection of Environment Canadas weather radars operatingin this band. Bandes 5470-5600MHz et 5650-5725MHz Jusqu' nouvel ordre, les quipements viss par la prsente section ne peuvent pas tre transfr s sur la bande de 5 600 5 650 MHz, afin de protger l'environnement des radars mtorologique s exploits par le Canada surcette bande. CE Statement Herby, Hui Zhou Gaoshengda Technology Co., LTD declares that this WIFI Module WCTA1M2501 is in compliance with the essential requirements and other relevant provisions of PAGE 4 OF 4 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD WCTA1M2501 Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product allowed to be used in all EU mem ber states. Use the WIFI Module in the environment with the temperature between 0 and 60 5150-5250MHz is restricted to indoor use only. Operation Frequency For BT/BLE:
2402MHz~2480MHz For 2.4G WIFI:
2412MHz~2472MHz (802.11b/802.11g/802.11n(HT20)) 2422MHz~2462MHz (802.11n(HT40)) For 5G WIFI:
5150MHz-5350MHz, 5470MHz-5725MHz, 5725MHz~5875MHz, 5250MHz~5350MHz, Max output power:
BT: 0.007W BLE: 0.0026W 2.4G WIFI: 0.0406W 5G WIFI: 0.0466W ManufacturerHui Zhou Gaoshengda Technology Co., LTD AddressNO.75 Zhongkai Development Area, Huizhou, Guangdong, China E-mail: guanh@gaosd.cn DECLARATION OF CONFORMITY I hereby declare that the product Product:
Product Name: WIFI Module Model: WCTA1M2501 Brand Name: N/A Hardware Version: V1.0 Software Version V1.0 EN 62368-1:2014+A11:2017 EN 62311:2020 ETSI EN 301 489-17 V3.2.4 (2020-09) ETSI EN 301 489-3 V2.1.1 (2019-03) ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 300 328 V2.2.2 (2019-07)
(Name of product, type or model, batch or serial number) satisfies all the technical regulations applicable to the product within the scope of Council Directives 2014/53/EU, 2014/35/EU and 2014/30/EU:and declare that the same application has not been lodged with any other notified body. PAGE 5 OF 4 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD WCTA1M2501 ETSI EN 301 893 V2.1.1 (2017-05) ETSI EN 300 440 V2.2.1 (2018-07) All essential radio test suites have been carried out. NOTIFIED BODY: MiCOM Labs Inc Address:
575 Boulder Court, Pleasanton, California94566 USA Identification Number: 2280 MANUFACTURER or AUTHORISED REPRESENTATIVE:
Address:
Hui Zhou Gaoshengda Technology Co., LTD NO.75 Zhongkai Development Area, Huizhou, Guangdong, China This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorised representative. Point of contact:
Hui Guan, +86-0752-2096698/+86-0752-2096698
(Name, telephone and fax number) 2021-06-15
(Place, date of issue)
(Signature) Hui Guan, engineer
(Name and title in block letters) PAGE 6 OF 4 Version 1.0