FCC ID: 2ALU4DX206A05 Bluetooth Speaker

BLUETOOTH SPEAKER USER MANUAL VB-206 2019.03.22 VERSION 1.1.1 Introduction:

Thank you for choosing VB-206 Bluetooth Speaker that is compatible with cell phones, tablets, computers and other Bluetooth-enabled devices. IPX5 rating means this speaker is splash proof. Water jets being splashed on the speaker from any direction will not cause any harm to the speaker or affect its performance. Note: This Bluetooth speaker isn't splash proof without the silicone cover, please make sure the silicone cover is intact and closed under wet condition. Description

@ Bluetooth Button

@ LED Indicator Light Volume Down- / Previous Track Button

@ Volume Up+ / Next Track Button Power ON/OFF Button AUX In Port

@ Micro USB Charging Port Left Channel Speaker Microphone Right Channel Speaker

@ Diaphragm 1 Diaphragm 2 USB Charging Cable 3.5mm Aux In Cable Whats in the box Bluetooth Version: 5.0 1) Speaker Bluetooth Receiving Range:10M 2) 60cm USB Charging Cable Product Size: 175.5*50*78mm 3) 3.5mm Aux In Cable Battery Capacity: 2200mAh 4) User Manual Input: 5V/1A Specification Speaker Pairing If the speaker is on, it will automatically look for the last connected device and automatically connect after finding, If not find within 10s, the speaker will re-enter the pairing mode, or press the Bluetooth button to enter the pairing mode directly. Once connected, a voice will indicate Bluetooth is connected, and a flashing blue light appears every 5s. If there is no pairing after 10s, speaker will enter the sleep mode, and you can press the button to wake up Bluetooth pairing. If the device exceeds the connection distance, the speaker will disconnect and go into sleep mode. The device come back within 10 minutes,the speaker will reconnect. Auto off: The speaker will automatically shut down if disconnected after 10 minutes. Disconnect: Long press the Bluetooth button up to 3 seconds to unpair the device and enter into pairing mode. Button Power Button: Long press the button up to 3s to turn device ON/OFF with a voice indicate Bluetooth mode/Power off. While in music mode, press the power button to pause/play music; When speaker is paired to your phone, press power button to answer the call, and press again to hang up, double press the power button to recall the last call.

+: short press the button to go to the next track, long press the button to turn up volume. -" short press the button to go to the previous track, long press the button to turn down volume. Once paired, press the Bluetooth button to broadcast the current battery level. Aux-in Mode Under this mode the music will only play from the device it is hooked up to. Adjust the volume on speaker and press the power button to mute. Charging Charging time 2.5 hours (5V/1A). There will be an alarm prompt when the battery gets low.While the speaker is charging,the indicator light will turn solid red and will turn off after the speaker is fully charged. Indicator light status A flashing blue light indicates speaker is ready to pair. Once paired the light will turn solid blue for 3s and then turn off. When the Bluetooth is connected, a flashing blue light appears every 5s. While speaker is charging, the indicator light will turn solid red. Once speaker is fully charged, the light will turn off. Supplier's Declaration of Conformity 47 CFR 2.1077 Compliance Information Unique Identifier Trade Name: MEIDI, Model No.: VB-206 Responsible Party U.S. Contact Information Walmart,Inc., Bentonville, AR72716 Walmrt.com FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. A Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Date: 2019/04/26 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Title: financial manager Regarding: FCC ID: 2ALU4DX206A05 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Jing Song in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Huizhou Artsun Industrial Company Limited. This authorization is valid until further written notice from the applicant. Print Name: Xiaozhen Zhang Signature:

On behalf of Company: Huizhou Artsun Industrial Company Limited Telephone: 0752-2595689 E-mail: hzpxcw@163.com

To:

Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: Huizhou Artsun Industrial Company Limited No.2, Floor 14th, Unit one,Ruihe Commercial Square, No.1 Yandayi Road,Henan'an District Huizhou, 516007 China Regarding: Confidentiality Request regarding application for FCC ID: 2ALU4DX206A05 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 90 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Xiaozhen Zhang Title: financial manager Signature:

On behalf of Company: Huizhou Artsun Industrial Company Limited Telephone: 0752-2595689 E-mail: hzpxcw@163.com