Quick Start Guide Wireless or Wired, it's 11n Wireless Roaming Router QUANTUM T2 Use it as Router 2. Checking the Mode Your product has the Q-MODE switch. Check that the switch is set to ROUTER. Internet Modem 1-1 Storage Sharing Printer Sharing 1. Connecting the Internet You can connect your product to the Internet over a direct WAN or through a modem. 1-1 If you access Internet by the modem such as ADSL, VDSL, cable and FTTH, plug one end of the Ethernet cable to the Internet port of your product and the other end to the LAN port of your modem. 1-2 1-2 If you access the Internet by WAN broadband, plug the Ethernet cable to the Internet port of your product. Use it as Extender
- With HUMAX QUANTUM Series, you will experience seamless Wi-Fi network at any moment.
- T1, T2, T3, T3A, X1 and X3 support both roaming & mesh network, and T5, T7 and T9 support roaming network only.
- Roaming & mesh feature is congured over HUMAX products. (*) WPS Electrical Outlet 3. Powering On 1. Plug in the AC power adaptor from the power connector to an electrical outlet. 2. If the power successfully turns on, a white light on the power LED is turned on. Note: Use only the AC power adaptor provided in this product. Using other adaptors may damage the product. Warning 1. Connect all devices before you plug any power cords into the electrical outlet. 2. Always turn o the product and network devices before you connect or disconnect any cables. 3. Hazardous electrical voltages can exist on the product and peripheral devices and can be present on any connected cables. T1 Router PC Mobile Phone Gaming Console &
Media Sharing 4. Connecting the Network Devices You can connect your network devices to the router over wired or wirelessly. Use Ethernet cables to connect your devices to the router over a wired Ethernet connection. Note: We recommend you to connect entertainment devices such as OTT, gaming console and IPTV to the Entertainment ports. The ports have the priority in transmitting multimedia data without transmission delay or interruption. Electrical Outlet 2. Powering On 1. Changing the Mode Your product has the Q-MODE switch. Slide the switch to EXTENDER. T1 Extender Extender has wireless connectivity with a third party router
* Roaming & mesh network is congured over HUMAX products T1 T2 Scan the QR code to access @@ on your mobile device. You can congure WPS between the extender and the router. 3-1 Press the WPS buttons on both devices within 2 minutes. When WPS is successfully congured, the blue light blinks on the Wireless LED. Note: If you use another router other than HUMAX product, the white light blinks on the Wireless LED, which means your extender is in repeater mode. 3-2 Check the network when the connection is complete. If you connect the extender to a HUMAX router, both network names are the same as if they congure a single network. But, if you use a router other than HUMAX products, the network name of your extender will copy the routers name following Ext2G or Ext5G. (ex. Router_Ext5G) WPS LEDs on the Front Panel After the product is successfully registered on the network, the LEDs illuminate continuously to indicate that the product is active and fully operational. LED Power White On Power is on. Operation White On White Blinking Internet White On White Slow Blinking White Fast Blinking Blue On Blue Slow Blinking Blue Fast Blinking Wireless WPS Internet is connected. Firmware update is in progress. Internet is not connected. Network is connected wirelessly. 2 minutes. 2 minutes. White On Ethernet Internet, Wireless, Ethernet Blinking Wi-Fi is not available. Networking device is connected to the LAN port. No device is connected to the LAN port. Resetting the system is in progress. Note: Blue light is turned on when the roaming & mesh network is successfully congured over HUMAX products. Q-MODE Your product supports Q-MODE that enables operating as a router or an extender. Its very simple to change the operation mode. Just slide the Q-MODE switch to ROUTER or EXTENDER. Then, the mode change is automatically completed. ROUTER edoM retuoR WISP Mode EXTENDER AP Mode Repeater Mode Media Bridge Mode BOTH
*Roaming Mode
*Mesh Mode Internet Connection You can congure the network over a wired Ethernet connection or wirelessly. Model: QUANTUM T1 Code: 4-00021 Model: QUANTUM T1 Power Input: 12V , 0.5A Wired Router Login:
http://dearmyrouter.net ID: admin Password: nnnn SSID: We Love You So Much Password: humax_nnnn 123456789 123456789 Connect the Ethernet cable between the PC and the LAN port of your product. Wireless S/N: QT1YYWWnnnnnn Mac: DCDC8321000001 Designed by Humax (Korea) Made in China Please change Login Password and Wi-Fi Password for Security. 1. Open the web browser. 2. Enter http://dearmyrouter.net to the address bar, and then press the Enter key. 3. The default ID and password are admin and nnnn. nnnn is the last 4 digits of serial number. S/N: QT1YYWWnnnnnn Mac: DCDC8321000001 Designed by Humax (Korea) Made in China Please change Login Password and Wi-Fi Password for Security. Power Input: 12V , 0.5A Code: 4-00021 Router Login:
http://dearmyrouter.net ID: admin Password: nnnn SSID: We Love You So Much Password: humax_nnnn Refer to the serial number at the bottom of your product. Note: We recommend you to change the ID and password to secure your network. Go to Management > Change Password to change your password. Model: QUANTUM T2 Welcome to QUANTUM T2!
Code: 4-00022 Power Input: 12V , 1.0A 123456789 ID http://dearmyrouter.net 192.168.1.1 Router Login:
http://dearmyrouter.net ID: admin Password: nnnn SSID: We Love You So Much Password: humax_nnnn admin
****
Password S/N: QT2YYWWnnnnnn Mac: DCDC8321000001 Designed by Humax (Korea) Made in China Please change Login Password and Wi-Fi Password for Security. Login
! For the default ID and password, see the bottom of the product. FCC ID:O6ZT2 211-170302 D170007211 WPS etwork. Router Mode 1. Welcome Click Start. The system will check automatically if your router is connected to the Internet. 3. Wireless Network Setting Enter your own network name and password to change the default settings. You can secure your wireless network from unauthorized users. Wireless Setting WPS WISP Mode You can use wireless Internet service in Router mode. 1. Log in to dearmyrouter.net, and then go to Management > WISP Mode. 2. Set the WISP mode to On, and select your Internet service provider. Welcone to Quantum T2 !
This is Quantum T2,
Complies with 11n Wi-Fi standard.
Wi-Fi 600 Mbps speed.
Provides WEP 64/128-bit, WPA, WPA2 and WPA-Mixed security.
Supports Guest Network ,Media Share, QoS, Parental Control, VPN, WPS etc.
Supports Smart Roaming for Mobile Client.
Supports Power Saving, LED Control, System Restart for energy saving. You can more easily set various functions through web UI and experience fabulous router. Do you want to start the wizard for easy setup?
Start Note:
If you want to skip the installation wizard, click Skip. This button is available always during installation wizard.
2. Internet Setting You can connect the Internet automatically or manually depending on your Internet connection type. Note: This page appears only when your product is not connected to the Internet. Internet Setting If you do not know the Internet connection type, please contact your ISP. Connection Type Dynamic IP
? What is the Dynamic IP/Static IP/PPPoE/PPTP/L2TP? view more Previous Next Select the connection type your ISP is using. In most cases, it will be Dynamic IP.
Dynamic IP: The Internet will be connected automatically.
Static IP: Enter the IP address, Subnet mask, Gateway and DNS server supplied by the ISP.
PPPoE: Enter the user name and password supplied by the ISP.
PPTP or L2TP: Enter the user name, password and VPN server supplied by the ISP. Note: For more information on the Internet connection, refer to the web manual at www.humaxdigital.com/QUANTUM. 2.4GHz Network Name (SSID) We Love You So Much Password
**********
? About wireless security and password. view more Previous Next 4. Password Setting Enter your ID and password to change the default password. You can enhance the security on your network environment. Change Password (Optional) If you change the password, you can make your network more secure. For the default ID and password, see the bottom of the product. The changed password will be applied from the next login. Login ID Current Password New Password Retype New Password Previous admin
**********
**********
**********
Next 5. Summary When you complete your network settings, the information on your network will display. Internet Wireless 2.4GHz Summary Connection Type IP Address Network Name (SSID) Password Dynamic IP 100.1.1.1 We Love You So Much humax_0000 Previous Done If your router is successfully connected to the Internet, the information on the internet connection will display. FCC warning:
Internet Setting Connection Type WAN IP Address Subnet Mask Gateway Primary DNS Secondary DNS Dynamic IP 100.1.1.1 255.255.255.0 192.168.1.1 0.0.0.0 0.0.0.0 Previous Next users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. WISP Mode In this mode, all Ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in Ethernet ports share the same IP to ISP through wireless LAN. Select the device and enter the password to connect the host device. Network Name (SSID) CH RSSI Security MAC Address We Love You So Much TIANA_89 ASUS Wafya NETGEAR iptime 1 1 1 3 1 9
-45
-47
-51
-26
-51
-77 WPA2-PSK WPA2-PSK WPA2-PSK None WPA2-PSK WEP BC:76:70:7C:5C:74 F8:D1:11:5C:84:BA 70:7C:F8:D1:11:55 11:5C:54:D8:33:98 70:7C:F8:D1:11:55 5C:74:31:AB:C1:D2 Refresh Band 2.4GHz 2.4GHz 2.4GHz 2.4GHz 2.4GHz 2.4GHz Password
**********
Back Connect Extender Mode Slide the Q-MODE switch to EXTENDER.
T2 works automatically in AP mode if you connect it to a router over a wired Ethernet cable and use a client device wirelessly.
T2 works automatically in media bridge mode if you connect it to a router wirelessly and use a client device over a wired Ethernet cable.
T2 works automatically in repeater mode if you connect it wirelessly to a router other than a HUMAX router and use a client device wirelessly.
If T2 works together with a HUMAX router, the roaming & mesh network products. 1. Welcome products only, click HUMAX Products and go to 2-1. Roaming & Mesh. HUMAX If you use a third party product other than HUMAX, click Other Products and go to 2-2 Repeater. Welcome to Extended Network Your product has changed to Extender mode. In this mode, you can expand Wi-Fi coverage. plug the Ethernet cable into the WAN port of your product. In this case, the product operates automatically in Bridge mode. Select a product you want to connect wirelessly. HUMAX Products Other Products Next 2-1. Roaming & Mesh Just press the WPS buttons on HUMAX products within 1 second. Then, they are connected each over the mesh network. Roaming & Mesh Setting HUMAX each other two products that you want to connect to, you can simply Extended Network via the WPS button. Place the product on where to actual use, press the WPS button on your product. Minimizing the walls, furniture, appliances, etc. to connect between the two products, and the products work best when operating at up to 12m (40 feet) inside and outside. Tip!
and add new products are the closest connection automatically. WPS Start WPS Process... Previous 2-2. Repeater If you have a networking device other than HUMAX products, select it from the list and then enter the password. You will experience stronger and wider Wi-Fi signal. Repeater Setting Select a device from the list below and enter the password to connect to the host device. Using the WPS button on both devices, you can easily connect them. of the host device. In this case, the host operates automatically in Bridge mode. Network Name (SSID) CH RSSI Security MAC Address IPTime Zone TIANA_89 ASUS Wafya 1 1 1 3
-45
-47
-51
-26 WPA2-PSK WPA2-PSK WPA2-PSK None BC:76:70:7C:5C:74 F8:D1:11:5C:84:BA 70:7C:F8:D1:11:55 11:5C:54:D8:33:98 WPS Band 2.4GHz 2.4GHz 2.4GHz 2.4GHz Password
**********
Back Next Home After completing the network settings, go to Operation Mode. In this page, you can see the current status of your product. Home This page shows the current status and some basic settings of the device. 2.4G Dynamic IP 10.10.10.1 Internet Operation Mode Connection Status IP Address Subnet Mask Gateway DNS Server MAC Address QUANTUM T2 SanULTRA DUAL_1 4 Devices Router Mode Dynamic IP 183.99.19.131 255.255.255.128 183.99.19.129 168.126.63.1/168126.63.2 F4:28:53:35:C3:F9