Use it as Router Electrical Outlet 3. Powering On 1. Plug in the AC power adaptor from the power connector to an electrical outlet. 2. If the power successfully turns on, a white light on the power LED is turned on. Note: Use only the AC power adaptor provided in this product. Using other adaptors may damage the product. Warning 1. Connect all devices before you plug any power cords into the electrical outlet. 2. Always turn off the product and network devices before you connect or disconnect any cables. 3. Hazardous electrical voltages can exist on the product and peripheral devices and can be present on any connected cables. WPS Model: QUANTUM T3 Power Input: 12V 1.5A Barcode S/N: QT3YYWWnnnnnn Mac: DCDC8321000001 FCC ID: O6ZT3 Humax Co.,Ltd. HUMAX BLDG., 2, Yeongmun-ro, Cheoin-gu, Yongin-si, Gyeonggi
-do,449-934,South Korea Code: 4-00023 Router Login:
http://dearmyrouter.net ID: admin Password: nnnn 2.4G/5G SSID: We Love You So Much Password: humax_nnnn 211-170615 D170027211 Trade Name/Mark: xxxxxx Full Postal Address: xxxxxx Designed by Humax (Korea) Made in China Please change Login Password and Wi-Fi Password for Security. 2. Checking the Mode Your product has the Q-MODE switch. Check that the switch is set to ROUTER. 4. Connecting the Network Devices You can connect your network devices to the router over wired or wirelessly. Use Ethernet cables to connect your devices to the router over a wired Ethernet connection. Note: We recommend you to connect entertainment devices such as OTT, gaming console and IPTV to the Entertainment ports. The ports have the priority in transmitting multimedia data without transmission delay or interruption. LEDs on the Front Panel After the product is successfully registered on the network, the LEDs illuminate continuously to indicate that the product is active and fully operational. LED Power Internet Wireless Ethernet Operation Power is on. Power is off. Internet is connected. Firmware update is in progress. Internet is not connected. Network is connected wirelessly. White On Off White On White Blinking Off White On White Slow Blinking WPS is in configuration. It may take 2 minutes. White Fast Blinking WPS configuration is failed. Blue On Blue Slow Blinking Blue Fast Blinking Off White On Off
*Roaming & mesh network is configured through the Internet.
*Roaming & mesh network is in configuration. It may take 2 minutes.
*Roaming & mesh network configuration is failed. Wi-Fi is not available. Networking device is connected to the LAN port. No device is connected to the LAN port. Resetting the system is in progress. Internet, Wireless, Ethernet Blinking T3 Router Note: Blue light is turned on when the roaming & mesh network is successfully configured over HUMAX products. Quick Start Guide Wireless or Wired, it's smooh and seamless AC1200 Dual Band Smart Wi-Fi Router QUANTUM T3 1. Connecting the Internet You can connect your product to the Internet over a direct WAN or through a modem. 1-1 If you access Internet by the modem such as ADSL, VDSL, cable and FTTH, plug one end of the Ethernet cable to the Internet port of your product and the other end to the LAN port of your modem. 1-2 If you access the Internet by WAN broadband, plug the Ethernet cable to the Internet port of your product. Modem Internet PC Mobile Phone Gaming Console &
Media Sharing 1-1 1-2 Storage Sharing Printer Sharing Use it as Extender
- With HUMAX QUANTUM Series, you will experience seamless Wi-Fi network at any moment.
- T1, T2, T3, T3A, X1 and X3 support both roaming & mesh network, and T5, T7 and T9 support roaming network only.
- Roaming & mesh feature is congured over HUMAX products. (*) Scan the QR code to access @@ on your mobile device. 3. Configuring WPS You can configure WPS between the extender and the router. 3-1 Press the WPS buttons on both devices within 2 minutes. When WPS is successfully configured, the blue light blinks on the Wireless LED. Note: If you use another router other than HUMAX product, the white light blinks on the Wireless LED, which means your extender is in repeater mode. 3-2 Check the network when the connection is complete. If you connect the extender to a HUMAX router, both network names are the same as if they configure a single network. But, if you use a router other than HUMAX products, the network name of your extender will copy the routers name following Ext2G or Ext5G.
(ex. Router_Ext5G) WPS 1. Changing the Mode Your product has the Q-MODE switch. Slide the switch to EXTENDER. 2. Powering On Electrical Outlet WPS T3 Extender Extender has wireless connectivity with a third party router
*Roaming & mesh network is configured over HUMAX products Q-MODE Your product supports Q-MODE that enables operating as a router or an extender. Its very simple to change the operation mode. Just slide the Q-MODE switch to ROUTER or EXTENDER. Then, the mode change is automatically completed. WPS BOTH
*Roaming Mode
*Mesh Mode ROUTER Router Mode WISP Mode EXTENDER AP Mode Repeater Mode Media Bridge Mode Internet Connection You can configure the network over a wired Ethernet connection or wirelessly. Wired Connect the Ethernet cable between the PC and the LAN port of your product. Wireless 1. Open the web browser. 2. Enter http://dearmyrouter.net to the address bar, and then press the Enter key. 3. The default ID and password are admin and nnnn. nnnn is the last 4 digits of serial number. Refer to the serial number at the bottom of your product. Note: We recommend you to change the ID and password to secure your network. Go to Management > Change Password to change your password. Welcome to QUANTUM T3!
http://dearmyrouter.net 192.168.1.1 ID admin Password
****
Login
! For the default ID and password, see the bottom of the product. Model: QUANTUM T3 Power Input: 12V 1.5A Barcode S/N: QT3YYWWnnnnnn Mac: DCDC8321000001 FCC ID: O6ZT3 Humax Co.,Ltd. HUMAX BLDG., 2, Yeongmun-ro, Cheoin-gu, Yongin-si, Gyeonggi
-do,449-934,South Korea Code: 4-00023 Router Login:
http://dearmyrouter.net ID: admin Password: nnnn 2.4G/5G SSID: We Love You So Much Password: humax_nnnn 211-170615 D170027211 Trade Name/Mark: xxxxxx Full Postal Address: xxxxxx Designed by Humax (Korea) Made in China Please change Login Password and Wi-Fi Password for Security. Network Configuration on Web Page When you log in to the router for the first time, the installation wizard will appear. Then, follow the steps to configure the network. Router Mode 1. Welcome Click Start. The system will check automatically if your router is connected to the Internet. 3. Wireless Network Setting Enter your own network name and password to change the default settings. You can secure your wireless network from unauthorized users. Wireless Setting Welcone to Quantum T3 !
This is Quantum T3, x Complies with next generation 11ac Wi-Fi standard. x Wi-Fi 1200 Mbps - 900 + 300 Mbps speed. x Provides WEP 64/128-bit, WPA, WPA2 and WPA-Mixed security. x Supports Guest Network, Media Sharing, QoS, Parental Control, VPN, WPS etc. x Supports Roaming & Mesh for Mobile Client. x Supports Power Saving, LED Control, System Restart for energy saving. You can more easily set various functions through web UI and experience fabulous router. Do you want to start the wizard for easy setup?
Start Note:
If you want to skip the installation wizard, click Skip. This button is available always during installation wizard. We recommend you to update the firmware to the latest version when available. 2. Internet Setting You can connect the Internet automatically or manually depending on your Internet connection type. Note: This page appears only when your product is not connected to the Internet. Internet Setting 2.4GHz Network Name (SSID) We Love You So Much Password
5GHz Network Name (SSID) We Love You So Much Password
Copy 2.4GHz password
? About wireless security and password. view more Previous Next 4. Password Setting Enter your ID and password to change the default password. You can enhance the security on your network environment. Change Password (Optional) WISP Mode You can use wireless Internet service in Router mode. 1. Log in to dearmyrouter.net, and then go to Management > WISP Mode. 2. Set the WISP mode to On, and select your Internet service provider. WISP Mode In this mode, all Ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in Ethernet ports share the same IP to ISP through wireless LAN. On/Off Select the device and enter the password to connect the host device. Network Name (SSID) CH RSSI Security MAC Address We Love So Much TIANA_89 ASUS Wafya NETGEAR iptime 1 1 1 3 1 9
-45
-47
-51
-26
-51
-77 WPA2-PSK WPA2-PSK WPA2-PSK None WPA2-PSK WEP BC:76:70:7C:5C:74 F8:D1:11:5C:84:BA 70:7C:F8:D1:11:55 11:5C:54:D8:33:98 70:7C:F8:D1:11:55 5C:74:31:AB:C1:D2 Refresh Band 2.4GHz 2.4GHz 2.4GHz 2.4GHz 2.4GHz 2.4GHz Password
**********
Back Connect If you change the password, you can make your network more secure. For the default ID and password, see the bottom of the product. The changed password will be applied from the next login. Login ID Current Password New Password Retype New Password admin
Extender Mode Slide the Q-MODE switch to EXTENDER. WPS You can manually configure your connection settings. If you do not know the Internet connection type, please contact your ISP. Previous Next Connection Type Dynamic IP
? What is the Dynamic IP/Static IP/PPPoE/PPTP/L2TP? view more 5. Summary When you complete your network settings, the information on your network will display. Internet Wireless 2.4GHz Wireless 5GHz Summary Connection Type IP Address Network Name (SSID) Password Network Name (SSID) Password Dynamic IP 100.1.1.1 We Love You So Much humax_0000 We Love You So Much humax_0000 Previous Done Previous Next Select the connection type your ISP is using. In most cases, it will be Dynamic IP. Dynamic IP: The Internet will be connected automatically. Static IP: Enter the IP address, Subnet mask, Gateway and DNS server supplied by the ISP. PPPoE: Enter the user name and password supplied by the ISP. PPTP or L2TP: Enter the user name, password and VPN server supplied by the ISP. Note: For more information on the Internet connection, refer to the web manual at www.humaxdigital.com/QUANTUM. If your router is successfully connected to the Internet, the information on the internet connection will display. Internet Setting Connection Type WAN IP Address Subnet Mask Gateway Primary DNS Secondary DNS Dynamic IP 100.1.1.1 255.255.255.0 192.168.1.1 0.0.0.0 0.0.0.0 Previous Next T3 operates as an extender, and configures the roaming & mesh network with a HUMAX router. x T3 works automatically in AP mode if you connect it to a router over a wired Ethernet cable and use a client device wirelessly. x T3 works automatically in media bridge mode if you connect it to a router wirelessly and use a client device over a wired Ethernet cable. x T3 works automatically in repeater mode if you connect it wirelessly to a router other than a HUMAX router and use a client device wirelessly. x If T3 works together with a HUMAX router, the roaming & mesh network is configured over the products. 1. Welcome If you configure the network with HUMAX products only, click HUMAX Products and go to 2-1. Roaming & Mesh. If you use a third party product other than HUMAX, click Other Products and go to 2-2 Repeater. Welcome to Extended Network Your product has changed to Extender mode. In this mode, you can expand Wi-Fi coverage. If you want to configure the network over a wired Ethernet connection, plug the Ethernet cable into the WAN port of your product. In this case, the product operates automatically in Bridge mode. Select a product you want to connect wirelessly. HUMAX Products Other Products Next 2-1. Roaming & Mesh Just press the WPS buttons on HUMAX products within 1 second. Then, they are connected each other automatically, and configure the mesh network. You will experience seamless Wi-Fi roaming over the mesh network. Roaming & Mesh Setting HUMAX each other two products that you want to connect to, you can simply Extended Network via the WPS button. Place the product on where to actual use, press the WPS button on your product. Tip!
Minimizing the walls, furniture, appliances, etc. to connect between the two products, and the products work best when operating at up to 12m (40 feet) inside and outside. If the existing configured, pressing the WPS button on the Mesh Network products and add new products are the closest connection automatically. WPS Start WPS Process... Previous 2-2. Repeater If you have a networking device other than HUMAX products, select it from the list and then enter the password. You will experience stronger and wider Wi-Fi signal. Repeater Setting Select a device from the list below and enter the password to connect to the host device. Using the WPS button on both devices, you can easily connect them. If you want to configure the network over a wired Ethernet connection, plug the Ethernet cable into the WAN Port of the host device. In this case, the host operates automatically in Bridge mode. WPS Network Name (SSID) CH RSSI Security MAC Address IPTime Zone TIANA_89 ASUS Wafya iptime 1 1 1 3 9
-45
-47
-51
-26
-77 WPA2-PSK WPA2-PSK WPA2-PSK None WPA2-PSK BC:76:70:7C:5C:74 F8:D1:11:5C:84:BA 70:7C:F8:D1:11:55 11:5C:54:D8:33:98 5C:74:31:AB:C1:D2 Band 2.4GHz 2.4GHz 2.4GHz 2.4GHz 5GHz Back Password
**********
Next Home After completing the network settings, go to Operation Mode. In this page, you can see the current status of your product. Home This page shows the current status and some basic settings of the device. 2.4G 5G Dynamic IP 10.10.10.1 Internet Operation Mode Connection Status IP Address Subnet Mask Gateway DNS Server MAC Address QUANTUM T3 SanULTRA DUAL_1 4 Devices Router Mode Dynamic IP 183.99.19.131 255.255.255.128 183.99.19.129 168.126.63.1/168126.63.2 F4:28:53:35:C3:F9