6222D-UUC Wi-Fi Dual-band 2X2 11ac +Bluetooth 5.0 Combo Module Datasheet FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 6222D-UUC Module Datasheet Office: 6 Floor, Building U6, Junxiang U8 Park, Hangcheng Avenue, Bao'an District, Shenzhen City, CHINA Factory: No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, CHINA TEL: +86-755-2955-8186 Website: www.fn-link.com Customer Approval :
Company Title Signature Date Fn-Link FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information Revision History Version Date Revision Content 2020/04/22 New version Draft LYJ Approved SZS 1.0 1.1 1.2 1.3 1.4 1.5 2.0 Update Pin assignments, reference 2020/06/09 design and ordering information for LYJ SZS share antenna version 2020/08/04 Update Power on sequence 2020/08/19 Update ordering information 2020/08/26 Update 2.4G RF Specification Update Module Picture and Marking 2020/9/1 Description 2021/3/16 Add -W4 info LYJ LYJ LYJ LYJ LGP SZS SZS SZS SZS SZS FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information CONTENTS 6222D-UUC 1 Overview....................................................................................................................................1 1.1 Introduction......................................................................................................................... 1 1.2 Features.............................................................................................................................. 1 1.3 General Specification........................................................................................................ 2 1.4 Recommended Operating Rating....................................................................................3 1.5 EEPROM Information....................................................................................................3 2 Wi-Fi RF Specification........................................................................................................... 4 2.1 2.4GHz RF Specification.................................................................................................. 4 2.2 5GHz RF Specification......................................................................................................6 3 Bluetooth Specification.......................................................................................................10 3.1 Bluetooth Specification................................................................................................... 10 4 Pin Assignments................................................................................................................... 11 5 Dimensions.............................................................................................................................13 5.1 Module Picture................................................................................................................. 13 5.2 Physical Outline............................................................................................................... 14 5.3 Marking Description.........................................................................................................14 5.4 Layout Recommendation............................................................................................... 15 6 Reference Design................................................................................................................. 16 7 Power on Sequence............................................................................................................. 17 8 Ordering Information........................................................................................................... 18 9 The Key Material List........................................................................................................... 18 10 Recommended Reflow Profile.........................................................................................19 11 Package Information.......................................................................................................... 20 11.1 Reel..................................................................................................................................20 11.2 Packaging Detail............................................................................................................ 20 10.3 Carrier Tape Detail........................................................................................................ 22 10.4 Moisture sensitivity........................................................................................................ 22 FN-LINK TECHNOLOGY LIMITED Proprietary & Confidential Information 6222D-UUC 1 Overview 1.1 Introduction Fn-Link Technology would like to announce a low-cost and low-power consumption module which has all of the Wi-Fi and Bluetooth functionalities. The highly integrated module makes the possibilities of web browsing, VoIP, Bluetooth headsets applications. With seamless roaming capabilities and advanced security, also could interact with different vendors 802.11a/b/g/n/ac 2x2 Access Points in the wireless LAN. The wireless module complies with IEEE 802.11 a/b/g/n/ac 2x2 MIMO standard and it can achieve up to a speed of 867Mbps with dual stream in 802.11n to connect the wireless LAN. The integrated module provides USB2.0 interface for Wi-Fi and Bluetooth. This compact module is a total solution for a combination of Wi-Fi + BT technologies. The module is specifically developed for Smart TV and OTT Box application. 1.2 Features Highly integrated wireless local area network(WLAN) system-on-chip (SOC) for 5 GHZ 802.11ac, or 2.4G/5G 802.11n WLAN applications. Dual-stream spatial multiplexing up to 867 Mbps data rate. Supports 20/40MHz at 2.4GHz and supports 20/40/80MHz at 5GHz Supports USB interface for WLAN and Bluetooth. Complies with USB2.0 for WLAN and BT controller. Supports Bluetooth V5.0+HS, BLE and be backwards compatible with Bluetooth 1.2, 2.X+ enhance data rate. Supports Bluetooth for class1 , class2 and class3 power level transmissions. FN-LINK TECHNOLOGY LIMITED 1 Proprietary & Confidential Information Block Diagram:
6222D-UUC Note: The module has share antenna and non-share antenna version, please refer to the ordering information or contact us for detail. 1.3 General Specification Model Name 6222D-UUC Product Description Support Wi-Fi/Bluetooth L x W x H: 27 x 18 x 2.03 mm Dimension Wi-Fi Interface BT Interface USB 2.0 USB 2.0 Operating temperature 0C 1 to 70C Storage temperature
-40C to 85C Humidity RoHS Operating Humidity 10% to 95% Non-Condensing Storage Humidity 5% to 95% Non-Condensing All hardware components are fully compliant with EU RoHS directive 1. Operating temperature actually passed at -20C. FN-LINK TECHNOLOGY LIMITED 2 Proprietary & Confidential Information 1.4 Recommended Operating Rating 6222D-UUC Operating Temperature VCC33 VDDIO Min. Typ. Max. Unit 3.15 0
25 3.3 3.3 70 3.45
deg.C V V VCC33 = 3.3V(Unit:mA) Power Consumption
(2.4G HT20) Wi-Fi on Mode
(2.4G HT20) TX RX TX RX
(5G HT80)
(5G HT80) BT on 130 459 210 510 210 32 1.5 EEPROM Information WI-FI Vendor ID Product ID 0BDAh C82Ch FN-LINK TECHNOLOGY LIMITED 3 Proprietary & Confidential Information 2 Wi-Fi RF Specification 2.1 2.4GHz RF Specification 6222D-UUC Receive PER @ -92 dBm, typical -83 2Mbps PER @ -90 dBm, typical -80
(11b,20MHz)
@8%
- 5.5Mbps PER @ -87 dBm, typical -79 PER
- 11Mbps PER @ -85 dBm, typical -76 Feature WLAN Standard Frequency Range Number of Channels Output Power Spectrum Mask 1st side lobes(to fc 11MHZ) 2st side lobes(to fc 22MHZ) Freq. Tolerance Test Items SISO Sensitivity SISO Sensitivity Receive
(11g,20MHz) @10%
PER SISO Sensitivity Receive
(11n,20MHz) @10%
PER Description IEEE 802.11b/g/n Wi-Fi compliant 2.400 GHz ~ 2.497 GHz (2.4 GHz ISM Band) 2.4GHzCh1 ~ Ch14 802.11b /11Mbps : 17 dBm 1.5 dB @ EVM -9dB 802.11g /54Mbps : 15 dBm 1.5 dB @ EVM -25dB 802.11n /MCS7 : 14 dBm 1.5 dB @ EVM -28dB Min. b/g/n Max. b/g/n Typ. b/g/n Unit b/g/n
-40/-30/-40
-51/-33/-58
dBr dBr ppm
20/20/20 Standard Value
-20/-20/-20 Test Value 1Mbps
6Mbps 9Mbps PER @ -89 dBm, typical -85 PER @ -88 dBm, typical -84
- 12Mbps PER @ -87 dBm, typical -82
- 18Mbps PER @ -84 dBm, typical -80
- 24Mbps PER @ -81 dBm, typical -77
- 36Mbps PER @ -78 dBm, typical -73
- 48Mbps PER @ -73 dBm, typical -69
- 54Mbps PER @ -71 dBm, typical -68
- MCS=0
- MCS=1
- MCS=2
- MCS=3
- MCS=4
- MCS=5
- MCS=6 PER @ -89 dBm, typical -85 PER @ -86 dBm, typical -82 PER @ -84 dBm, typical -80 PER @ -80 dBm, typical -77 PER @ -77 dBm, typical -73 PER @ -72 dBm, typical -69 PER @ -71 dBm, typical -68 FN-LINK TECHNOLOGY LIMITED 4 Proprietary & Confidential Information 6222D-UUC
- MCS=7
- MCS=0
- MCS=1 PER @ -69 dBm, typical -67 PER @ -88 dBm, typical -82 PER @ -85 dBm, typical -79 Receive
- MCS=2 PER @ -83 dBm, typical -77
- MCS=3 PER @ -79 dBm, typical -74
(11n,40MHz) @10%
- MCS=4 PER @ -76 dBm, typical -70 SISO Sensitivity PER
- MCS=5
- MCS=6
- MCS=7
- MCS=0
- MCS=1
- MCS=2 PER @ -71 dBm, typical -66 PER @ -70 dBm, typical -65 PER @ -68 dBm, typical -64 PER @ -89 dBm, typical -85 PER @ -86 dBm, typical -82 PER @ -84 dBm, typical -80 Receive
- MCS=3 PER @ -80 dBm, typical -77
- MCS=4 PER @ -77 dBm, typical -73
(11n ,20MHz) @10%
- MCS=5 PER @ -72 dBm, typical -69 MIMO Sensitivity PER
- MCS=6
- MCS=7 PER @ -71 dBm, typical -68 PER @ -69 dBm, typical -67
- MCS=8, PER @ -89 dBm, typical -85
- MCS=15, PER @ -69 dBm, typical -67
- MCS=0
- MCS=1
- MCS=2 PER @ -88 dBm, typical -82 PER @ -85 dBm, typical -79 PER @ -83 dBm, typical -77 Receive
- MCS=3 PER @ -79 dBm, typical -74
- MCS=4 PER @ -76 dBm, typical -70
(11n,40MHz) @10%
- MCS=5 PER @ -71 dBm, typical -66 MIMO Sensitivity PER
- MCS=6
- MCS=7 PER @ -70 dBm, typical -65 PER @ -68 dBm, typical -64
- MCS=8, PER @ -88 dBm, typical -82
- MCS=15, PER @ -68 dBm, typical -64 Maximum Input Level 802.11b : -10 dBm 802.11g/n : -20 dBm Antenna Reference Small antennas with 0~2 dBi peak gain FN-LINK TECHNOLOGY LIMITED 5 Proprietary & Confidential Information 6222D-UUC 2.2 5GHz RF Specification Feature Description WLAN Standard Frequency Range Number of Channels Output Power Test Items IEEE 802.11a/n/ac 2x2, Wi-Fi compliant 4.900 GHz ~ 5.845 GHz (5.0 GHz ISM Band) 5.0GHzPlease see the table1 802.11a /54Mbps : 15 dBm 1.5 dB @ EVM -25dB 802.11n /MCS7 : 14 dBm 1.5 dB @ EVM -28dB 802.11ac /MCS9 : 13 dBm 1.5 dB @ EVM -32dB Standard Value Test Value
6Mbps 9Mbps PER @ -88 dBm PER @ -87 dBm
- 12Mbps PER @ -86 dBm SISO Receive Sensitivity
- 18Mbps PER @ -83 dBm
(11a,20MHz) @10% PER
- 24Mbps PER @ -80 dBm
-85
-84
-82
-80
-77
-73
-69
-68
-85
-82
-80
-77
-73
-69
-68
-67
-82
-80
-79
-78
-74
-68
-66
-64
-84
-63
- 36Mbps PER @ -77 dBm
- 48Mbps PER @ -72 dBm
- 54Mbps PER @ -70 dBm
- MCS=0 PER @ -88 dBm
- MCS=1 PER @ -85 dBm
- MCS=2 PER @ -83 dBm
- MCS=5 PER @ -71 dBm
- MCS=6 PER @ -70 dBm
- MCS=7 PER @ -68 dBm
- MCS=0 PER @ -89 dBm
- MCS=1 PER @ -88 dBm
- MCS=2 PER @ -86 dBm
- MCS=3 PER @ -83 dBm
- MCS=6 PER @ -73 dBm
- MCS=7 PER @ -71 dBm
- MCS=8 PER @ -89 dBm
- MCS=15 PER @ -68 dBm SISO Receive Sensitivity
- MCS=3 PER @ -80 dBm
(11n,20MHz) @10% PER
- MCS=4 PER @ -76 dBm MIMO Receive Sensitivity
- MCS=4 PER @ -79 dBm
(11n,20MHz) @10% PER
- MCS=5 PER @ -74 dBm FN-LINK TECHNOLOGY LIMITED 6 Proprietary & Confidential Information SISO Receive Sensitivity
- MCS=3 PER @ -77 dBm
(11n,40MHz) @10% PER
- MCS=4 PER @ -73 dBm MIMO Receive Sensitivity
- MCS=4 PER @ -76 dBm
(11n,40MHz) @10% PER
- MCS=5 PER @ -72 dBm 6222D-UUC
-82
-79
-77
-74
-70
-66
-65
-64
-79
-76
-74
-71
-67
-63
-62
-63
-79
-61
- MCS=0 PER @ -85 dBm
- MCS=1 PER @ -82 dBm
- MCS=2 PER @ -80 dBm
- MCS=5 PER @ -69 dBm
- MCS=6 PER @ -67 dBm
- MCS=7 PER @ -66 dBm
- MCS=0 PER @ -87 dBm
- MCS=1 PER @ -85 dBm
- MCS=2 PER @ -83 dBm
- MCS=3 PER @ -80 dBm
- MCS=6 PER @ -70 dBm
- MCS=7 PER @ -69 dBm
- MCS=8 PER @ -85 dBm
- MCS=15 PER @ -66 dBm
- MCS=0, NSS1 PER @ -86 dBm -82
- MCS=1, NSS1 PER @ -84 dBm -80
- MCS=2, NSS1 PER @ -82 dBm -77
- MCS=3, NSS1 PER @ -79 dBm -73
- MCS=4, NSS1 PER @ -75 dBm -69
- MCS=5, NSS1 PER @ -70 dBm -68
- MCS=6, NSS1 PER @ -69 dBm -67
- MCS=7, NSS1 PER @ -68 dBm -62
- MCS=8, NSS1 PER @ -64 dBm -60
- MCS=0, NSS1 PER @ -88 dBm -79
- MCS=1, NSS1 PER @ -87 dBm -77
- MCS=2, NSS1 PER @ -85 dBm -74
- MCS=3, NSS1 PER @ -82 dBm -71
- MCS=4, NSS1 PER @ -78 dBm -66
- MCS=5, NSS1 PER @ -73 dBm -65
- MCS=6, NSS1 PER @ -72 dBm -64
- MCS=7, NSS1 PER @ -71 dBm -59
- MCS=8, NSS1 PER @ -67 dBm -57 SISO Receive Sensitivity
(11ac,20MHz) @10% PER MIMO Receive Sensitivity
(11ac,20MHz) @10% PER FN-LINK TECHNOLOGY LIMITED 7 Proprietary & Confidential Information 6222D-UUC
- MCS=0, NSS1 PER @ -84 dBm -79
- MCS=1, NSS1 PER @ -81 dBm -77
- MCS=2, NSS1 PER @ -79 dBm -74
- MCS=3, NSS1 PER @ -76 dBm -70 SISO Receive Sensitivity
- MCS=4, NSS1 PER @ -73 dBm -66
(11ac,40MHz) @10% PER
- MCS=5, NSS1 PER @ -68 dBm -65 MIMO Receive Sensitivity
(11ac,40MHz)
@10%
PER
- MCS=6, NSS1 PER @ -67 dBm -64
- MCS=7, NSS1 PER @ -66 dBm -59
- MCS=8, NSS1 PER @ -61 dBm -57
- MCS=9, NSS1 PER @ -60 dBm -55
- MCS=0, NSS1 PER @ -86 dBm -79
- MCS=1, NSS1 PER @ -84 dBm -76
- MCS=2, NSS1 PER @ -82 dBm -74
- MCS=3, NSS1 PER @ -79 dBm -72
- MCS=4, NSS1 PER @ -76 dBm -67
- MCS=5, NSS1 PER @ -71 dBm -63
- MCS=6, NSS1 PER @ -70 dBm -62
- MCS=7, NSS1 PER @ -69 dBm -61
- MCS=8, NSS1 PER @ -64 dBm -56
- MCS=9, NSS1 PER @ -63 dBm -54
- MCS=0, NSS1 PER @ -81 dBm -79
- MCS=1, NSS1 PER @ -78 dBm -76
- MCS=2, NSS1 PER @ -76 dBm -74
- MCS=3, NSS1 PER @ -72 dBm -71
- MCS=6, NSS1 PER @ -64 dBm -62
- MCS=7, NSS1 PER @ -62 dBm -61
- MCS=8, NSS1 PER @ -58 dBm -56
- MCS=9, NSS1 PER @ -56 dBm -54
- MCS=0, NSS1 PER @ -82 dBm -76
- MCS=1, NSS1 PER @ -81 dBm -73 SISO Receive Sensitivity
- MCS=4, NSS1 PER @ -69 dBm -67
(11ac,80MHz) @10% PER
- MCS=5, NSS1 PER @ -66 dBm -63 MIMO Receive Sensitivity
- MCS=2, NSS1 PER @ -79 dBm -71
(11ac,80MHz) @10% PER
- MCS=3, NSS1 PER @ -75 dBm -68
- MCS=4, NSS1 PER @ -72 dBm -64
- MCS=5, NSS1 PER @ -69 dBm -60 FN-LINK TECHNOLOGY LIMITED 8 Proprietary & Confidential Information 6222D-UUC
- MCS=6, NSS1 PER @ -67 dBm -59
- MCS=7, NSS1 PER @ -65 dBm -58
- MCS=8, NSS1 PER @ -61 dBm -53
- MCS=9, NSS1 PER @ -60 dBm -51 Maximum Input Level 802.11a/n : -30 dBm Antenna Reference Small antennas with 0~2 dBi peak gain 15GHz(20MHz) Channel table Band range 5180MHz~5240MHz 5260MHz~5320MHz 5550MHz~5700MHz 5745MHz~5825MHz Operating Channel Numbers 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165 Channel center frequencies(MHz) 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825 FN-LINK TECHNOLOGY LIMITED 9 Proprietary & Confidential Information 6222D-UUC 3 Bluetooth Specification 3.1 Bluetooth Specification Feature Description General Specification Bluetooth Standard Bluetooth V5.0 of 1, 2 and 3 Mbps. Host Interface USB2.0 Antenna Reference Small antennas with 0~2 dBi peak gain Frequency Band 2402 MHz ~ 2480 MHz Number of Channels 79 channels Modulation GFSK, /4-DQPSK,8DPSK RF Specification Output Power (Class 1.5) Sensitivity @ BER=0.1%
for GFSK (1Mbps) Sensitivity @ BER=0.01%
for /4-DQPSK (2Mbps) Sensitivity @ BER=0.01%
for 8DPSK (3Mbps) Min. 4 dBm Typical. 5.4 dBm Max. 10 dBm
-92 dBm
-82 dBm
-70 dBm
-92 dBm
-80 dBm
-70 dBm
-85 dBm
-80 dBm
-70 dBm Maximum Input Level
/4-DQPSK (2Mbps) :-20dBm GFSK (1Mbps):-20dBm 8DPSK (3Mbps) :-20dBm FN-LINK TECHNOLOGY LIMITED 10 Proprietary & Confidential Information 4 Pin Assignments 6222D-UUC NO. Name Type Voltage 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 GPIO5 GPIO4 EESK EECS GND GND BT_RF GND GPIO0 GPIO1 WL_DP+
WL_DM-
GND GPIO3_WPS GPIO8_LED BT_WAKE_HOST HOST_WAKE_BT I/O I/O I/O I/O I/O I/O I/O O I Description IC GPIO5
(sFlash MISO PIN) IC GPIO4
(sFlash MOSI PIN) External Serial Flash clock
(sFlash for dongle application) External 32K or RTC clock input IC GPIO3(WLAN WPS ) IC GPIO8(WLAN LED low active)
(sFlash CS PIN) Ground connections USB data+ (USB2.0) USB data- (USB2.0) Ground connections Ground connections BT RF port Ground connections BT wake up HOST HOST Wake up BT IC GPIO0 IC GPIO1 3.3V 3.3V FN-LINK TECHNOLOGY LIMITED 11 Proprietary & Confidential Information WL_RF0 2.4G/5G Wi-Fi RF port0 (Option) 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 GND WL_RF1 GND GND GND GND GND RESET GND VDD33 NC GND I/O I/O I I P HOST_WAKE_WL 6222D-UUC Ground connections 2.4G/5G Wi-Fi RF port1 / BT Combo
(Option) Ground connections Ground connections Ground connections Ground connections Ground connections
(Shared with IC GPIO6) Enable pin for device ON: pull high ; OFF: pull low HOST_WAKE_WLAN
(Shared with IC GPIO7) Ground connections 3.3V Voltage input No connection (Floating) Ground connections 3.3V 3.3V 3.3V WL_WAKE_HOST O WLAN wake up HOST 3.3V FN-LINK TECHNOLOGY LIMITED 12 Proprietary & Confidential Information 6222D-UUC 5 Dimensions 5.1 Module Picture L x W: 27x 18(+0.3-0.1) mm FG6222DUUC-W0/W2/W3 FG6222DUUC-W1/W4 H: 2.03(0.1) mm Weight 1.58(0.1)g FN-LINK TECHNOLOGY LIMITED 13 Proprietary & Confidential Information 6222D-UUC 5.2 Physical Outline
(Unit: mm)
< TOP VIEW >
5.3 Marking Description
< TOP VIEW >
FN-LINK TECHNOLOGY LIMITED 14 Proprietary & Confidential Information 5.4 Layout Recommendation
(Unit: mm)
< TOP VIEW >
6222D-UUC FN-LINK TECHNOLOGY LIMITED 15 Proprietary & Confidential Information 6 Reference Design No Share BT Antenna:
6222D-UUC Share BT Antenna:
FN-LINK TECHNOLOGY LIMITED 16 Proprietary & Confidential Information 7 Power on Sequence 6222D-UUC FN-LINK TECHNOLOGY LIMITED 17 Proprietary & Confidential Information 6222D-UUC 8 Ordering Information Part No. FG6222DUUC-W0 FG6222DUUC-W1 FG6222DUUC-W2 FG6222DUUC-W3 FG6222DUUC-W4 Description RTL8822CU-CG,802.11a/b/g/n/ac+BLE5.0,2T2R+BT ANT,18.0*27.0,USB2.0, , RTL8822CU-CG,802.11a/b/g/n/ac+BLE5.0,2T2R+BT ANT,18.0*27.0,USB2.0,, RTL8822CU-CG,a/b/g/n/ac,Wi-Fi+BLE5.0,2T2R+BT ANT,18X27mm,USB2.0,, RTL8822CU-CG,802.11a/b/g/n/ac+BLE5.0,2T2R+BT ANT,18.0*27.0,USB2.0,, (12dbm) RTL8822CU-CG,802.11a/b/g/n/ac+BLE5.0,2T2R+BT ANT,18.0*27.0,USB2.0, , 9 The Key Material List Item Part Name Description Manufacturer Inductor 2016 2.2uH,20%
Cenker, Sunlord, Ceaiya Diplexer 1608 Dual-band, dual-mode Glead, Walsin, ACX, Murata, 2.4GHz/5GHz WLAN MAG.LAYERS ECEC, TKD, Hosonic, JWT, Crystal 3225 40MHz -40~110 Chipset RTL8822CU-CG PCB FR4, 4 LAYER, GREEN TXC Realtek SLPCB XY-PCB, GDKX, Sunlord, 1 2 3 4 5 FN-LINK TECHNOLOGY LIMITED 18 Proprietary & Confidential Information 10 Recommended Reflow Profile Referred to IPC/JEDEC standard. Peak Temperature: <250C Number of Times: 2 times 6222D-UUC FN-LINK TECHNOLOGY LIMITED 19 Proprietary & Confidential Information 11 Package Information 11.1 Reel A roll of 800pcs 6222D-UUC 11.2 Packaging Detail the take-up package Size of black tape:24mm*32.6m the cover tape :2.13mm*32.6m Using self-adhesive tape Color of plastic disc:blue A roll of 800pcs FN-LINK TECHNOLOGY LIMITED 20 Proprietary & Confidential Information 6222D-UUC NY bag size:460mm*385mm size 350*350*35mm The packing case size:350*210*370mm FN-LINK TECHNOLOGY LIMITED 21 Proprietary & Confidential Information 10.3 Carrier Tape Detail 6222D-UUC 10.4 Moisture sensitivity The Modules is a Moisture Sensitive Device level 3, in according with standard IPC/JEDEC J-STD-020, take care all the relatives requirements for using this kind of components. Moreover, the customer has to take care of the following conditions:
a) Calculated shelf life in sealed bag: 12 months at <40C and <90% relative humidity
(RH) b) Environmental condition during the production: 30C / 60% RH according to IPC/JEDEC J-STD-033A paragraph 5 c) The maximum time between the opening of the sealed bag and the reflow process must be 168 hours if condition b) IPC/JEDEC J-STD-033A paragraph 5.2 is respected d) Baking is required if conditions b) or c) are not respected e) Baking is required if the humidity indicator inside the bag indicates 10% RH or more FN-LINK TECHNOLOGY LIMITED 22 Proprietary & Confidential Information Single Modular approval Declaration letter FN-LINK LIMITED apply Single TECHNOLOGY We HUNAN modular approval for Product Name: Wi-Fi/BT Module Model: 6222D-UUC FCC ID: 2AATL-6222D-UUC According to 996369 D01 Module Equip Auth Guide v01r04 and 15.212 requirement:
1) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly;
Answer Yesshielded for both side . 2) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal;
Answer Yes All inputs to the modules are buffered through logic or microprocessor inputs. 3)The modular transmitter must have its own power supply regulation. Answer Yes A low drop out regulator is used for modular power supply regulation. 4) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b);
Answer Yes Device is equipped with PCB antenna.
(5) The module must demonstrate compliance in a stand-alone configuration; Answer Yes distance between modular and all AEs are bigger than 10cm refer to setup photo.
(6) The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements);
Answer Yes The modular has a permanent fixed label, and below statement was listed in the User Manual;The host device must be labeled to display the FCC ID of the module Contains FCC ID: 2AATL-6222D-UUC
(7) The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee;
Answer Yes The module comply with all specific rules applicable to the transmitter the grantee, Refer to test report and user manual . including all the conditions provided in the integration instructions by
(8) The module must comply with RF exposure requirements Answer Yes Transmitter meets MPE calculation of 47 CFR 1.1307 . Refer to MPE Reports and Refer to modular installation manual Please contact me if you have any further questions. Thanks for your attention. Best Regards, Chief Executive Officer HUNAN FN-LINK TECHNOLOGY LIMITED V1.0
13410505014 wangyuanjian@qinxinsz.com 357932305@qq.com
: 2020.08.12 1 2 3 4 5 6 ETS7m x 4m x 3m 700MHz---6GHz. S11 Agilent E5071B Agilent E5071B 1. WIFI Element E1 E2 E3 Value 2. Smith 3. 2.4-2.5GHz Effi Gain Effi
(%) 36.65 35.79 35.46 37.56 38.27 40.45 42.16 42.71 39.54 38.78 37.68
(dB)
-4.52
-4.35
-4.67
-4.51
-3.21
-3.72
-3.75
-4.45
-4.73
-4.57
-4.34
(dBi) 2.35 2.07 2.02 2.37 2.75 2.88 2.89 2.82 2.24 2.18 2.34 Freq
(MHz) 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 2.4-2.5GHz 3. 5.15-5.85GHz Effi Effi Gain
(dB)
(dBi) Freq
(MHz) 5150 5160 5170 5180 5190 5200 5210 5220 5230 5240 5250 5260 5270 5280 5290 5300 5310 5320 5330 5340 5350 5360 45.35 45.97 48.22 44.5 41.11 43.7 45.95 49.46 47.61 44.74 43.25 44.62 49.71 47.84 47.87 43.76 42.91 49.02 48.92 49.25 47.64 44.33
-4.52
-4.44
-4.18
-4.62
-5.07
-4.72
-4.44
-4.04
-4.25
-4.59
-4.78
-4.61
-4.01
-4.22
-4.22
-4.72
-4.83
-4.09
-4.1
-4.06
-4.24
-4.64 1.29 1.46 1.56 1.41 1.55 1.17 1.12 1.55 1.26 1.09 1.21 1.23 1.67 1.48 1.58 1.19 1.11 1.05 1.17 1.3 1.29 1.87 Freq
(MHz) Effi
(%) Effi
(dB) Gain
(dBi) Freq
(MHz) Effi
(%) Effi
(dB) Gain
(dBi) 5380 39.52 5390 40.41
-4.03
-3.93 5400 43.63
-3.6 5410 40.2 5420 41.62
-3.96
-3.81 5430 42.65
-3.7 5440 45.97 5450 44.26 5460 42.71 5470 42.11 5480 41.56 5490 47.58 5500 46.8 5510 45 5520 42.84 5530 41.39 5540 45.51 5550 48.49 5560 47.63 5570 44.93 5580 42.91 5590 44.48 5600 46.5 5610 45.52
-3.38
-3.54
-3.69
-3.76
-3.81
-3.23
-3.3
-3.47
-3.68
-3.83
-3.42
-3.14
-3.22
-3.47
-3.67
-3.52
-3.33
-3.42 1.69 1.88 2.26 1.95 2.19 2.34 2.64 2.51 2.28 2.28 2.21 2.89 2.82 2.54 2.35 2.19 2.56 2.66 2.77 2.42 2.2 2.33 2.39 2.28 5620 5630 5640 5650 5660 5670 5680 5690 5700 5710 5720 5730 5740 5750 5760 5770 5780 5790 5800 5810 5820 5830 5840 5850 43.77 42.17 43.31 46.75 48.1 46.61 43.88 42.45 44.22 47.77 49.33 46.31 41.38 40.92 44.37 46.85 45.37 39.09 34.9 37.56 41.71 45.11 37.81 32.38
-3.59
-3.75
-3.63
-3.3
-3.18
-3.31
-3.58
-3.72
-3.54
-3.21
-3.07
-3.34
-3.83
-3.88
-3.53
-3.29
-3.43
-4.08
-4.57
-4.25
-3.8
-3.46
-4.22
-4.9 2.07 1.91 2.09 2.42 2.48 2.11 1.88 1.6 1.78 2.09 2.29 1.73 1.52 1.25 1.51 1.8 1.61 0.92 0.77 0.87 1.23 1.41 0.72 0.66 5.15-5.85GHz You can see antenna size is 32mm*11.3mm* From below FPC antenna specificati Specification. And PCB Pad size for IPEX terminal just follow the below chart. The FPC antenna is connected to the PCB at the position of R43.R44the RF line the Line between the FPC antenna and Wifi Modulemust be 50ohm R36 R37 R40 R41 R44 R45 0 ohm 0 ohm 0 ohm 0 ohm IPEX 2 IPEX 1 FCC Statement FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247,15.407 Antenna info:
External antenna Manufacture:HUNAN FN-LINK TECHNOLOGY LIMITED Model:6222D-UUC Antenna gain 2.5dBi per antenna Antenna number:2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. We will retain control over the final installation of the modular such that compliance of the end product is assured. In such cases, an operating condition on the limit modular approval for the module must be only approved for use when installed in devices produced by a specific manufacturer. If any hardware modify or RF control software modify will be made by host manufacturer,C2PC or new certificate should be apply to get approval,if those change and modification made by host manufacturer not expressly approved by the party responsible for compliance ,then it is illegal. FCC Radiation Exposure Statement The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: 2AATL-6222D-UUC Or Contains FCC ID: 2AATL-6222D-UUC When the module is installed inside another device, the user manual of the host must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any company of the host device which install this modular with limit modular approval should perform the test of radiated & conducted emission and spurious emission,etc. according to FCC part 15C : 15.247 and 15.407 and 15.209
& 15.207 ,15B Class B requirement, Only if the test result comply with FCC part 15C : 15.247 and 15.407 and 15.209 &
15.207 ,15B Class B requirementthen the host can be sold legally.