HunterDouglas Instructions for PV3 Assembly Js ELLITE RECEIVER Z (REF po1ag12000}
Vy (ATOR SABLE
{REF 1050812937)
, oe fs 1137)
- 4 a 4 a Orne hi ae
~~ MOTOR Ag
(AER 4 gRES 010511800}
M1 O810899) From Assembly Connect the Power Source Hi Plug the power cable from the motor into the extension cable, Hf Plug the other end of the extension cable into the DC power supply. 3
@ Plug the DC power supply into a standard outlet, n Extenston fable WARNING: Keep cords and small parts out of the reach of children. They can wrap cords around their necks and STRANGLE. They can also put small parts in their mouths and CHOKE. WARNING: Electric shock and/or a fire hazard may occur if the DC power supply and cables are not properly installed. Operate the Assembly Check the Power Cord H Check fo ensure the power cord is not pinched. Manual contro! button Test the Assembly Using the Manuai Contro/ Button Testing the shade with the manual control button will allow you to ensure that the motor and power source are working correctly. Press the manual contro! button to test operation Satellite receiver
> Press the button on the satellite receiver to alternately rotate motor, stop, and rotate the other way. Test the Assembly Using the Remote Refer to the PowerView Remote Guide for mote information To link a shade to a remote:
1. 2. 3. 4. Press and hold J Stop for six seconds to put remote in program mode. The lights on remote will pulsate to indicate itis in program mode. Press and hold the manual control button on the assembly. While continuing to press the manual button, press If Stop on the remote. The motor will rotate slightly to Indicate it has been linked to the network. Press and hold [lif Stop for six seconds to exit program mode. To join a shade to a GROUP:
1. s 5. Press and hold IJ Stop for six seconds to put remote in program mode. The lights on remote will pulsate to indicate it is in program mode. Press desired group number (1 - 6) on the remote. The light for the group number selected will pulsate to show it is selected, Press and hold the manual control button on the assembly. While continuing to press the manual button, Press @@ Open on the remote. The motor will rotate stightly to indicate it has joined the group. Press and hold [il Stop for six seconds to exit program mode. To remove a shade from a group:
1. we Press and hold Stop for six seconds to put remote in program mode. The lights on remote will pulsate to indicate it is in program mode. Press desired group number (4 6) on the remote. The light for the group number selected will pulsate to show it is selected. Press and hold the manual contro} button on the assembly. While continuing fo press the manual button, Press *W Close on the remote. The shade will jog to indicate it has been removed from the group. Radio Contro! Operation Once the assembly has been joined to a group, radio control is used to operate the motor. There is no need to aim the remote toward the assembly being operated. Multiple assemblies can be operated at the same time. Remote Functions:
1. 2. To wake up remote, press Ill Stop. The last group(s) selected will be highlighted and active. Press Al or Groups 4-6 to select specific shade(s) to move. Selected groups will light to show they are selected. a. Multiple Group number may be selected at a time. b. To deselect a Group, press the Group number again. The light for that group will go out. Select the 4 OPEN button to move the motor in one direction. Select the "W CLOSE button to move the motor in the other direction. While a motor is in motion, press 4% OPEN or W CLOSE, the opposite of motor motion to reverse direction.