Table of Contents Congratulations on purchasing your new Hunter ceiling fan! It will provide comfort and performance in your home or office for many years. This installation and operation manual contains complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. What to Expect with Your Installation 30 inches Tools Needed Mounting Options Ceiling Bracket 7 feet E2 P A G Ladder E3 P A G E4 P A G E5 P A G Downrod Wiring Canopy Blades E6 P A G E9 P A G E10 P A G E11 P A G Light Kit Remote Control Remote Control Cradle Operation, Maintenance & Cleaning E12 P A G E14 P A G E16 P A G E17 P A G E15 P A G 1
?
?
Troubleshooting
?
E18 P A G www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company What to Expect with Your Installation If you are unfamiliar with wiring, use a qualified electrician. 30 inches from blade tip to nearest wall or obstruction 7 feet from bottom edge of blade to the floor Read and Save These Instructions This product conforms to UL Standard 507. WARNINGS w.1 - To reduce the risk of fire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box. w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. w.3 - To reduce the risk of fire, electrical shock, or motor damage, use only Hunter Solid State Speed Controls. w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades. Must be able to secure the fan to building structure or fan-rated outlet box You may need a friend to help you. Know your wiring Assess location CAUTIONS Ceiling angles greater than 34 will require an Angled Mounting Kit. See page 4 for details. 1 2 3 Standard Downrod for ceilings 8-10 feet high Shorter Downrod for fans installed close to ceiling Longer Downrod for ceilings 10 feet or higher Check box to see fan weight Assess ceiling angle Select a downrod length 2 c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. c.2 - Use only Hunter replacement parts. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: modifications not approved by the party responsible for compliance could void users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Tools Needed Ladder Pliers Wire Strippers Screwdrivers Power Drill
(optional) 9/64 Drill Bit
(optional) If mounting to a support structure, you will also need these tools. 3 www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company 34O CEILING Mounting Options If you have a flat ceiling:
Hang your fan by a standard downrod (included). W A L L If you have an angled ceiling:
1. You will need a longer downrod (sold separately). 2. If your ceiling angle is greater than 34, you will also need an Angled Mounting Kit (sold separately). O P T I O N 1 O P T I O N 2 Standard Mounting Angled Mounting Use the three steps below to determine if your ceiling angle is greater than 34 1 34 2 3 FOLD on dotted line PLACE against wall SLIDE toward ceiling Support Structure Support Structure Standard Mounting Style Ceiling Outlet Box
(required) Angled Mounting Style Ceiling Outlet Box
(required) Guide Touches BOTH Ceiling & Wall You need ONLY a Longer Downrod
*most common ATIO N 1 U T I S ATIO N 2 U T I S Use Standard Mounting or Low-Profile Mounting to hang the fan from a flat ceiling. Use Angled Mounting to hang the fan from a vaulted or angled ceiling. but Guide Touches Wall NOT Ceiling You need BOTH a Longer Downrod &
an Angled Mounting Kit 4 www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Ceiling Bracket e r w o u r n P OFF T For angled ceilings, point opening toward peak. Use wood screws
(included) when securing to support structure with approved electrical outlet box. Drill 9/64 pilot holes in support structure to aid in securing ceiling bracket with hardware found in the hardware bag. Use machine screws
(provided with outlet box) when securing to existing ceiling fan-rated outlet box. Make sure it is securely installed and is acceptable for fan support of 31.8 kg (70 lbs) or less. Make sure all four bumpers are still attached. Refer to warning w.1 on pg. 2 If you are unable to do this, call Technical Support at 1-888-830-1326. 5 To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch location. www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Downrod 1 n o i t p O Standard Downrod for ceilings 8-10 high
) l d e b m e s s a
-
e r p
(
d e d u l c n I 2 n o i t p O Shorter Downrod for fans installed close to ceiling l y e t a r a p e S d o S l 3 n o i t p O Longer Downrod for angled ceilings or ceilings 10 or higher l y e t a r a p e S d o S l skip to next page If you need a different downrod length follow these steps:
Steps 1-5 to remove standard downrod pipe 4 2 3 e d i l S 9 8 e d i l S 7 Steps 6-10 to reassemble with new pipe 5 6 1 10 6 www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Downrod (continued) KEEP!
K EEP
!
T U C P I R T
& S 3/8 8 l
) e a c s o t t o n
(
Remove the pre-installed setscrew so that the downrod can be inserted. Hand tighten the downrod (at least 4-5 full turns) until it stops. The wires can be cut, but leave at least 8 extending from the top of the downrod. Tighten the setscrew with pliers. DO NOT HAND TIGHTEN. 8 3/8 7 If the setscrew is not tightened securely, the fan may fall. www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Downrod (continued) Put the wires and downrod through the canopy. Let the canopy sit loosely on top of the fan. DO NOT PICK THE FAN UP BY THE CANOPY OR WIRES. Place the downrod ball into the slot in the ceiling bracket. 8 www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Wiring Note: To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight. R O M FAN F
(
G r o u n d n g
) i O M CEILING F R Not for use in applications where the fan does not have a wall switch. O M CEILING F R Note: If you have a dual switch, please cap the secondary power wire from the ceiling. This will result in one unused switch. O M CEILING F R Green/Yellow Stripe S t r i p e G r e e n
/
Y e l l o w F R O M CEILING B A CKET R Using an orange wire connector from the hardware bag, connect the 3 grounding wires (green, green/
yellow stripe, or bare copper) coming from the ceiling, downrod, and hanging bracket. Refer to CAUTION c.1 on pg. 2 For a Single Switch Using the orange wire connectors from the hardware bag, connect the black wire (ungrounded) from the ceiling to the black from the fan. Connect the white wire (grounded) from the ceiling to the white wire from the fan. Cap the blue wire from the fan with an orange wire connector. It will not be used for single switch wiring 9
(
G r o u n d e d
)
(
U n g r o u n d e d
)
(
U n g r o u n d e d
) W h i t e l B u e B l a c k
(
G r o u n d e d
)
(
U n g r o u n d e d
) W h i t e B l a c k l B u e For Dual Switches Using the orange wire connectors from the hardware bag, connect the white wire
(grounded) from the ceiling to the white wire from the fan. Connect the black wire
(ungrounded) from the ceiling to the black wire from the fan. Connect the second (ungrounded) wire from the ceiling to the blue wire from the fan. FROM F A N FROM F A N Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Canopy Screw Holes Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown. Lift the canopy into place so that the screw holes are aligned. Insert the two canopy screws found in the hardware bag. 10 www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Blades Put the blade washers found in the hardware bag onto the blade screws found in the hardware bag. Then install the blade screws to secure each blade to a blade iron. 11 www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Light Kit Light Kit Screw two housing assembly screws from the hardware bag halfway into the motor housing. It does not matter which two screw holes you choose. Wrap keyhole slots around the screws and twist counterclockwise. Insert the third screw, found in the hardware bag, into place and then tighten all three screws. 12 www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Light Kit (continued) Connect the white wire from the fan to the white wire from the light kit. Then, connect the blue wire from the fan to the black wire from the light kit. Lift the globe and align the notches in the globe with the tabs in the light kit. Attach the globe by lifting and twisting counterclockwise until it rests firmly in place. 13 CONGRATULATIONS!
YOURE DONE!
See next page for remote operation instructions. www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Remote Control T Battery Door Phillips Head Screw To access the battery compartment, remove the small Phillips head screw that secures the battery door to the transmitter assembly. The battery should be installed with the positive
(+) side up. Replace with a CR2032 battery when necessary. e r w o u r n P ON The remote transmitter is already paired to the receiver and ready to use. Note: If your need to pair your remote, remove the battery door. Cycle power to the fan by turning power off and back on at the wall switch (or circuit breaker if necessary). Within three minutes, press the pair button on the remote. If pairing was successful, a single beep will sound. If three beeps sound, the remote was unpaired. Re-pair using the steps above. To prevent faulty operation, please disconnect power from all other ceiling fans within range while pairing. 14 www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Remote Control Cradle You have two options to install the included remote control cradle to the wall. Choose which path works best for you. Option 1: Using Screws Option 2: Using Adhesive Strip Remove the cradle from the cradle bracket. Choose your cradle installation location. If you are installing into drywall, drill two 9/64 width holes using the cradle bracket as a guide. Gently hammer the included drywall anchors into the pre-drilled holes. Install the cradle bracket to the wall with the included screws. Slide the cradle onto the mounted bracket. Separate the lining from the back of the adhesive strip on the cradle bracket. Press the cradle bracket against the wall and hold firmly for 30 seconds. 15 www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Operation, Maintenance, and Cleaning Light Button Fan Button Fan Control Fan Operation:
Press and quickly release the fan button on the remote control to turn the fan OFF or ON. Use the fan control directional pad to raise or lower the fan to the desired speed Light Operation:
Press and quickly release the light button on the remote control to turn the light OFF or ON. Press and hold the light button for continuous dim. Slide the remote into the cradle when not in use. 16 Cleaning the fan - use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes. www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Download the app:
Visit your app store and search simpleconnect to find the app. Launch the app. Note: The HomeKit identification number is located on the front cover of the English side of the Parts Guide. Follow the onscreen prompts to set up your fan. 1 2 3 17 SIMPLEconnect connects to available 2.4 GHZ WiFi networks. www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company Troubleshooting Fan doesnt work Excessive wobbling Noisy Operation Wireless Issues Make sure power switch is on. Pull the pull chain to make sure it is on. Push the motor reversing switch firmly left or right to ensure that it is engaged. Check the circuit breaker to ensure the power is turned on. Make sure the blades spin freely. Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram on pages 9. Check the plug connection in the switch housing. Make sure the blades are properly installed on the blade iron posts. Turn the power off, support the fan carefully, and check that the hanger ball is properly seated. Use the provided balancing kit and instructions to balance the fan. Make sure the blades are properly installed on the blade iron posts. Check to see if any of the blades are cracked. If so, replace all of the blades. Reset the Wi-Fi module by removing the battery door. Press and hold the reset button for 5 seconds. The fan and light LEDs will flash once the module has been reset. Remote control of fan is erratic Make sure the battery is installed correctly. Install a fresh battery. Transmitter only works when held at close range Change battery. If you have multiple remotes or multiple remote-controlled fans installed on the same circuit breaker and you are experiencing interference or faulty operation of your remote controls, please go to www.HunterFan.com/FAQs and click How do I properly install multiple remote-controlled fans?
for information on how to correct this issue. Use of the HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. Compatible with iOS 7.1 or higher / Android 4.3 or higher Android and Google Play are trademarks of Google Inc. Apple logo is a trademark of Apple, Inc. App store is a service mark of Apple, Inc. 18 www.HunterFan.com1.888.830.1326M3592-01 12/14/15 2015 Hunter Fan Company