FCC ID: 2AMOVSAM0110 RC TRUCK

Forward Common troubleshooting method This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-ex-

empt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. 2.4Ghz INSTRUCTION MANUAL -1:10 SCALE AMPHIBIOUS RC TRUCK Welcome to our companys world of toys! To ensure an enjoyable experience with this toy, read the following instructionswhich will give you a proper understanding of the product and its correct usebefore use. Please hold on to this manual. USE AGE: 8+

NOTICE:

This toy is not suitable for children under the age of 36 months due to the risk of swallowing small components. They are a choking hazard. Keep these instructions for future reference. They contain important information. We have the right to improve/modify our product specifications without notice. Use under the supervision of adults. Do not change or modify this product. If you modify the product, you may not use it. BATTERY USE 1. When using the battery for the first time, charge it before use. For the first two charges, the charge time will be at least 8 hours for the first charge and 4 hours for the second charge. Do not overcharge. Charging for a long time will not increase power. 2. Insert the battery cable connector into the chargers cable port. Then plug the charger into an indoor power outlet. 3. Use the rechargeable battery and charger that we have configured for this product. 4. Regularly check toy, batteries, charger wires, plugs, and other parts. If these parts are damaged, they cannot be used again. They need to be repaired before they can be used. 5. Please use high-quality AA batteries for the best user experience of this product. Direction Trimmer On/Off INDICATOR On/Off OPERATING TIPS Make sure the power switch is in the On position. When you are operating the remote-control car, if the power switch is in the Off position, it will not function. When the remote-control car veers left when you are trying to drive in a straight line, adjust the direction trimmer slightly to the right until the remote-control car has the correct trajectory. When the remote-control car veers right when you are trying to drive in a straight line, adjust the direction slightly to the left until the remote-control car has the correct trajectory. Turn left/

Turn right Forward/Backward Battery charging and installation method 1. Install the battery according to the positive and negative electrodes in the battery box. 2. Install the battery cover as indicated by the arrows in the above figure. 3. Put rechargeable batteries into the battery box. 4. Turn the four rotating tabs to fasten the battery cover. 5. Batteries should be charged under adult supervision. 7.4V

(INCLUDED)

. 7 7 4 4 V V 7.4V7.4V

(INCLUDED) Press at the bottom and drive at high speed. Slow down to avoid rollover accident when entering the curve. 1. Flip the remote-control cars switch to the On position. 2. Operate the control trigger to make the remote-control car drive forward or backward and to the left or right. 3. If the remote-control car does not drive in a straight line, adjust the direction trimmer beneath the car. 4. Flip the switch of the remote-control car and controller to the Off position after use. Safe use of batteries 1. Charge under adult supervision. 2. Remove the rechargeable battery from under the car to charge. 3. Remove dead batteries from the remote-control car and controller. 4. Turn the remote-control car switch to the Off position before installing the battery. 5. When installing the batteries in the battery compartment according to the instructions, be careful not to install the (+) and (-) electrodes in the wrong position. Make sure that the batterys electrodes are installed correctly. 6. Do not recharge non-rechargeable batteries. 7. The power terminals must not be short-circuited. 8. If it has been a long time since you have used the remote-control car, remove the batteries from the remote-control car and controller. 9. Do not expose the battery to fire: It may explode or leak. 10. Different types of batteries or old and new batteries should not be mixed. 11. Only use the recommended batteries or their equivalent. 12. The batteries should be checked regularly for leaks. 13. Keep this manual for use when needed. This manual has important information. Maintenance and repair 1. Do not put the toy in the water: This will damage the electronic components. (If you buy an amphibious vehicle, you can drive it in the water.) 2. Do not allow the wires or power connector to come into contact with water. 3. Wipe the surface with a damp cloth. 4. Do not expose toys to high temperatures, humidity or direct sunlight. 5. If you don't expect to play for a long period, remove the batteries. When the car is moving, do not touch its four wheels with your hands to avoid damaging it. Avoid playing beside the road or in dangerous places. This will prevent accidents. Problem. Cause of problem. Solution Why the car will not drive. 1. You did not flip the cars or the controllers switch to the On position. 2. The battery is not installed correctly. 3. The cars battery power is low. 1. Flip the cars or controllers switch to the On position. 2. Install the battery correctly in the controller. 3. Replace the cars battery or charge rechargeable battery. The car is hard to control, or the remote control distance is limited. 1. People nearby are using the same or a close frequency. 2. The controller or car does not have enough power. 1. Use the car elsewhere or wait for others to stop using the frequency. 2. Replace the controllers or remote-control cars battery or charge the rechargeable battery. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-

tial installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Rotate the tabs to fasten the battery cover. 1. You must completely install the battery cover before using the remote-control car. 2. The battery and body-battery interface must not be exposed to water.

(NOT INCLUDED) 3. When the USB is charging, the red light will flash, and the red light will be off when the battery is fuly charged.The red light is on when the battery is disconnected from the power supply. Do not play with your remote-control car in wastewater. 210610HY

HYPER TOY COMPANY TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Confidentiality Request regarding application for FCC ID: 2AMOVSAM0110 Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name:JAMES KWOK Signature:

On behalf of Company: HYPER TOY COMPANY Telephone:856-694-0352 E-mail: info@rollen7.com Title: MANAGER

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration 177 Malaga Park Drive Malaga, NEW JERSEY 08328 USA Applicant Legal Business Name HYPER TOY COMPANY Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name 2AMOV 2AMOVSAM0110 JAMES KWOK info@rollen7.com 856-694-0352 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date:

2021-5-19 Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database JAMES KWOK MANAGER Applicant Declaration Rev:0.0

HYPER TOY COMPANY TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AMOVSAM0110 To whom it may concern:

Date: 2021-5-19 We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with HYPER TOY COMPANY This authorization is valid until further written notice from the applicant. Print Name: JAMES KWOK Title: MANAGER Signature:

On behalf of Company: HYPER TOY COMPANY Telephone:856-694-0352 E-mail: info@rollen7.com