To Costumers Thank you very much for your favor of our products! This manual aims to enable you quickly grasp the use of the product. This manual applies to the following model:
E-pack100 Digital WANET Repeater Icon Conventions The following icons are used in this manual. The explanation of icons are as follows:
Icon Caution Description Indicates situations that could cause data loss or equipment damage. Comment Indicates notes that serves as supplement, illustration or emphasis to the main content. Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in People's Republic of C hina (PRC) and/or other countries or areas. The Company retains the ownership of its trademarks and pro duct names. All other trade marks and/or prod uct names that may be used in this manual are properties of th eir respective owners. The prod uct described in this man ual may in clude the Compan y's computer programs stored in memory or other media. Laws in PRC and/or other countries or areas protect the exclusive righ ts of the Co mpany with respect to its computer programs. The purchase of this product shall not be deemed to grant, either directly or purchaser regarding the Compan y's computer programs. The Compan y's by implication, any rights to the i computer programs may not be copied, modified, distributed, decompiled, or reverse-engineered in any mann er without the prior w ritten consent of the Company. Disclaimer The Compa ny ende avors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and desig ns are subje ct to change without notice due to continuous technological development. No part of this man ual may be copied, modified, translated, or distributed in any manner without the prior written consent of the Company. We do not guar antee, for any pa rticular pur pose, the accuracy, validity, timeliness, legitimacy or complet eness of the th ird-party pr oducts and contents involved in this manual. If you ha ve any sug gestions or w ould like to receive mor e in formation, please v isit our website at:
http ://www.hytera.com, or call our serv ice hotline 400-830-7020. Federal Communications Commission (FCC) Regulatory Requirements According to the Fed requirements, the terminals must radiofrequency radiation, otherwise t he prod ucts shall not be sold in the eral C ommunications Commission regulato comply with the FCC's rules on ry ii U.S market. Besides, the manufacture shall be a sked to post a label o n products informing costumers of e costumers awareness of radiation protection. considerations and improving th Radiofrequency Radiation Control and Operation Instructions In order to e nsure the best perform ance of products and ensure that the radiation restrictions related to o ccupations or environme nts are met, the delivery time shall not exceed 50% of the rated factor. FCC Regulations Federal Communication Commission (FCC) requires that all radio communication products should meet the requirements set forth in the above standards before they can be marketed in the U.S, and the manufacturer shall post a RF label on the product to inform users of operational instructions, so as to enhance their occupational health against exposure to RF energy. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a iii particular installation. Verification of harmful interference by this equipment to radio or television reception can be determined by turning it off and then on. The user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a different circuit to that of the receiver's outlet. Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Operational Instructions and Training Guidelines To ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure limits in the above standards and guidelines, users should transmit not more than 50%
of the time and always adhere to the following procedures:
DMR Antenna gain must not exceed 3.5dBi. iv The antenna must be installed complying with the requirements of manufacturer or supplier, and it must be at least 42 cm away from human body. Compliance with RF Exposure Standards Hytera's radio complies with the following RF energy exposure standards and guidelines:
United States Federal Communications Commission, Code of Federal Regulations; 47 CFR 1.1307, 1.1310 and 2.1091 American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1:2005; Canada RSS102 Issue 5 March 2015 Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition ISEDC Statement This device complies with Innovation, Science and Economic Development Canada Compliance license-exempt RSS standard(s). Operation is subject to the following two conditions:
This device may not cause harmful interference. v This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement ISEDC Radiation Exposure Statement:
This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. This equipment should be installed and operated with minimum distance 42cm between the radiator & your body. ISEDC exposition aux radiations:
Ce dispositif doit tre limit aux oprations lies au travail dans un environnement d'exposition RF professionnel/contrl. Cet quipement doit tre install et utilis avec un minimum de 42cm de distance entre le radiateur et votre corps. vi EU Regulatory Conformance As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive:
2014/53/EU 2006/66/EC 2011/65/EU 2012/19/EU Please note that the above information is applicable to EU countries only. The maximum antenna gain is 3.5dBi, which is calculated in the EIRP. The distance from observation point to the antenna is 120cm. vii Content 1. Packing List .......................................................................................... 1 2. Product Component ............................................................................. 2 2.1 Host .................................................................................................. 2 2.2 Palm Microphone .............................................................................. 4 3. Installation ............................................................................................ 6 3.1 Installation Requirements ................................................................. 6 3.2 Host Installation ................................................................................ 6 3.3 Check after Installation ..................................................................... 8 4. Basic Operation .................................................................................... 9 4.1 Power on .......................................................................................... 9 4.2 Power off .......................................................................................... 9 4.3 GSM Link Building ............................................................................ 9 4.4 Switch Channel ................................................................................. 9 4.5 Host Information Query ..................................................................... 9 5. Fault Handling .................................................................................... 11 6. Maintenance and Cleaning ................................................................ 14 7. Accessories Purchase ....................................................................... 15 8. Scope and Duration of Warranty ...................................................... 16 viii 1. Packing List The packing case conta ins the follo wing items. If there is any loss or da mage, please contact the dealer or our company. Number Items Number Palm Mircophone Mannual 1 1 Items Host 1 Antenna 1 Battery 1 Comment The pictures in this manu al are for re ference on ly. Ple ase refer to the actual products. 1 2. Product Component 2.1 Host Num. Item Description 1 2 Battery Buckle Operation Indicator Toggle b uckle in th e dir ection of th e arr ow o f battery buckle and pull out or insert the battery. Operation st atus indic ation and the o peration indicator turns to flickerin g (the freq uency is 1s) and green if the host is operating properly. 2 Num. Item Description 3 4 5 6 7 8 9 RF Antenna Interface Data Interface Palm Microphone Interface Power Button onnect RF a ntenna for Used to c transmission and reception. The interface type is the UHF interface. signal Used for the host debu gging and interc onnection with center through IP network. Connect palm microphone. Used to contro l power on an d off. Long pres s the button for 1s to po wer on, and l ong pres s the button for 3s to power off. Backpack Hole Used for device installation in the backpack. Electric Quantity Button Indicator Touch the batter y l evel b utton, an d the p resent power level ked throug h po wer indicator. can be chec 10 Battery Supply power for the host. 3 2.2 Palm Microphone 2 3 4 5 6 7 8 1 9 10 Num. Item Description 1 2 3 4 5 6 PTT Button Alarm Button Power Button Indicator MIC Display Area Press the button to send a voice message. Press the b utton to i nitiate a n emer gency alarm. Press the button to power on and off. ation of palm Operation status indic microphone. Voice can be transmitted through MIC. Display status icons, ca lling informati on, etc. 4 Num. Item Description 7 8 9 10 Keyboard Speaker Aviation Plug Aviation Knob Function keys. The sound can be pla speaker. Connect with the host. Fix the aviation. yed through the 5 3. Installation 3.1 Installation Requirements Installation Position The host can be installed inside the backpack, and on the operation platform as well. 3.2 Host Installation The installation steps are as follows:
1. OptionalSIM card Installation If voice business through GSM link is in need, a SIM card can be installed in the position as the figure below. 2. Battery installation in the back of the host Aim the charging port to the main body, and then toggle the buckle in the direction of battery buckle arrow. Next, dont stop pushing the battery until it cant be pushed any further, and then loosen the battery buckle, as shown in the figure below. 6 2 1 3. Install the host as needed, such in a backpack or on a platform. When the host is installed in a backpack, the backpack hole should be fixed with the backpack using a screw. 4. The threaded end of sucker antenna should be inserted in the RF interface at the top of the host, and then screw it in clockwise direction. Note:
Please dont power up the device when one carries it. When the device is operating, the distance between a man and the antenna should be at least 2 meters. Our company 7 shall not take any responsibility if there were any consequece caused by operations now following the above rules. 3.3 Check after Installation After the whole insta llation process, the host can be po wered on. The proper functioning of the host can be checked b y watching the status of the LED light on the front panel. T he power indicator will be cons tantly red, and the oper ation indicator will be green and flickering if the host functions properly. Besides, the operation status of the host can be checked through palm microphone. 8 4. Basic Operation 4.1 Power on Long press Power Button for 1s, and then the power indicator will be constantly green. Comment The palm microphone can power on the host if the two are connected. 4.2 Power off Long press Power Button for 3s, and then the power indicator will extinguish. 4.3 GSM Link Building Voice business through GSM link can be realized by using an external palm microphone connecting with the host. 1. Connect the external palm microphone to the host. 2. Enter the GSM contact list, and then select the default GSM contact. 3. Press and hold PTT button, and then the GSM link can be built. 4.4 Switch Channel When the external palm microphone is connected to the host, the 10 default alternative channels can be switched to be the present channel through menu in the palm microphone. 4.5 Host Information Query When the external palm microphone connects to the host, the frequency, signal strength, battery level and other information of the host can be checked through the display screen of the palm microphone, as shown in the table below. 9 Operation Operation Method Wireless Link Enter the main interface of palm microp hone, as sho wn in Signal Strength the figure below. Check GSM Signal Strength Check GSM Link Status Check Power Level Check Battery Level Check 10 5. Fault Handling Description Cause Analysis Solution Check whether the The battery i s not properl y battery is correctly and installed or in bad contact. firmly installed is correct Power-On Failure Low battery. and firm Touch the battery display button to check the current battery level. In case the battery runs out of power, please charge the battery first or connect the external power for power supply, then try to power on. Check whether the The sendin g and rec eiving frequency is consistent, frequency ar e not consisten t and please contact Communication between E-pack100. dealer to reset the device failure between if necessary. E-pack100 The work frequenc y po int is Find the interference disturbed by strong signal and source, and if unable to unable to transmit usefu l shut down or stay away signal. from it, please apply for 11 Description Cause Analysis Solution another channel frequency. Other E-pack100 have left the Confirm and return to the communication coverage of communication this E-pack100. coverage. E-pack100 antenna is in abnormal connection Check whether the antenna is normally connected. The connection cable is Check the damage and damaged and the signal replace with new cable if energy leaks. necessary. Cable joint connected to the Check and tighten the antenna port is loose or joint. Replace it with new detached cable. joint if necessary. Short communication Transmit power is too low distance, and unclear voice Cable is internal damaged. Adjust the transmit power to high power. Please replace it with a new cable Find the interference source, Find the interference and if unable to shut down or source, and if unable to stay away from it, please shut down or stay away apply for another channel from it, please apply for frequency. another channel frequency. 12 If the above method doesnt solve your problem, or there are any other problems, please contact the local dealer or our company for more technical support. 13 6. Maintenance and Cleaning In order to ensure the good performance of the product and prolong its service life, please familiarize with the following contents for better daily maintenance and cleaning of this product. Maintenance Please do not use hard object puncture or scraping the product Please do not store the product in an environment containing corrosive electronic circuitry Cleaning Caution Please power off the product and disconnect the power connection before cleaning. Please Use clean dry lint free or brush regularly to wipe the dust on the surface of this product and the dust attached to the charging pole. The buttons and case of this product are easily to become dirty. Clean with neutral detergent and non-woven fabric. Please do not use detergents, alcohol, sprays or petroleum preparations to clean the products so as to avoid damage to the surface and case. After cleaning, make sure that the product is completely dry, otherwise don't use it. 14 7. Accessories Purchase If you want to purchase the main accessories of the product, please contact the dealer or call our service hotline at 400-830-7020. Caution Please use the accessories specified by our company. The consequences due to any use of unauthorized accessories shall be the responsibility of the user himself. 15 8. Scope and Duration of Warranty We promise that the product produced by our company can enjoy the warranty service under the contract from the date of purchase if there is any occurrence of the defects in material or manufacturing process under the condition of normal use, operation and maintenance. 16