all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual | Users Manual | 1.34 MiB | April 01 2016 | |||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | RF Exposure Info | April 01 2016 | ||||||
1 2 3 | Test Report | April 01 2016 | ||||||
1 2 3 | Test Report | April 01 2016 | ||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Report |
1 2 3 | User Manual | Users Manual | 1.34 MiB | April 01 2016 |
Preface Thank you for purchasing Hytera PT580H Plus F4 TETRA digital terminal. The terminal has a large translucent TFT color display, and supports both TMO and DMO modes. The benefits that PT580H Plus F4 can deliver you will dramatically improve your working efficiency. To derive optimum performance from the terminal, please read the Safety Information Booklet and Owners Manual carefully before use. Icon Information The following icons are available through this manual:
Caution: indicates situations that could cause damage to your terminal. Note: indicates tips that can help you make better use of your terminal. Term Explanation Key Operation Short press: to press a key and release it quickly. Long press: to press and hold down a key for above 1.5 seconds. Hold down: to press a key and remain holding it down. Individual Call Individual call is a simplex or duplex call initiated by a single user to another user, involving the calling party and the called party only. Group Call Group call is a simplex call initiated by a single user to a group of users, involving the calling party and all the group members. Telephone Call Telephone call is usually a full duplex call initiated between PT580H Plus F4 and a PSTN subscriber (such as telephone user or mobile phone user). To send or receive telephone calls, the terminal must operate in TMO mode, and must be authorized to access public network through PSTN gateway. Telephone call is a network service. For more details and availability of the service, please contact your service provider. Emergency Call Emergency call has the highest priority, and is very helpful for the user to request help when emergency occurs. Generally, it is set to group call type. Emergency call can break off any non-emergency calls in progress. 1 DMO (Direct Mode Operation) DMO mode allows terminals to communicate directly with each other in simplex mode, without network restriction. But functions that require network access, such as telephone call and short message, will be disallowed. TMO (Trunked Mode Operation) TMO mode allows terminals to communicate with each other via the TETRA network, in half duplex or full duplex mode. Functions that require network access are supported. To operate in TMO mode, the terminal must be granted authorization by your service provider, and must be within the network coverage. Air Interface Encryption An encryption method helpful for protecting message transmitted over the air. It encrypts data and signaling transmitted between the base station and terminal, to protect the message from eavesdropping. Full Duplex Full duplex allows the ability to communicate in both directions simultaneously. Half Duplex Half duplex, also known as simplex, allows the ability to communicate in only one direction, at a time. Two-way communication is possible, but not simultaneously. Copyright Information Hytera and HYT are trademarks or registered trademarks of Hytera Communications Co., Ltd. (Hytera) in PRC and/or other countries or areas. Hytera retains the ownership of its trademarks and product names. All other trademarks and/or product names that may be used in this manual are properties of their respective owners. The Hytera product described in this manual may include Hytera computer programs stored in memory or other media. Laws in PRC and/or other countries or areas protect the exclusive rights of Hytera with respect to its computer programs. The purchase of this 2 product shall not be deemed to grant, either directly or by implication, any rights to the purchaser regarding Hytera computer programs. Any Hytera computer programs may not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written consent of Hytera. Disclaimer Hytera endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied, modified, translated, or distributed in any manner without the express written permission of Hytera. If you have any suggestions or would like to learn more details, please visit our website at:
http://www.hytera.cn. RF Radiation Information RF Radiation Profile Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are transmitted. RF technology is widely used in communication, medicine, food processing and other fields. It may generate radiation during use. RF Radiation Safety In order to ensure user health, experts from relevant industries including science, engineering, medicine and health work with international organizations to develop standards for safe exposure to RF radiation. These standards consist of:
The device complies with RF Exposure requirements when the device used at 25 mm held-to-face
United States Federal Communications Commission, Code of Federal Regulations;
3 47CFR part 2 sub-part J;
American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992;
Institute of Electrical and Electronic Engineers (IEEE) C95. 1 1999;
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998;
FCC Regulations Federal Communication Commission (FCC) requires that all radio communication products should meet the requirements set forth in the above standards before they can be marketed in the U.S, and the manufacturer shall post a RF label on the product to inform users of operational instructions, so as to enhance their occupational health against exposure to RF energy. As a conscientious company centering on users, Hytera strictly complies with the forgoing requirements from design, production and test. 4 Contents RF Radiation Information .................................................................................................. 3 RF Radiation Profile ................................................................................................... 3 RF Radiation Safety ................................................................................................... 3 FCC Regulations ............................................................................................................... 4 Checking Items in the Package ......................................................................................... 6 Product Overview .............................................................................................................. 7 Terminal Controls ....................................................................................................... 7 Function Keypad ........................................................................................................ 8 Programmable Keys .................................................................................................. 8 Before Use ........................................................................................................................ 9 Charging the Battery .................................................................................................. 9 Assembly and Disassembly ..................................................................................... 11 Important Instructions ...................................................................................................... 14 Status Indicators.............................................................................................................. 15 LCD Icons ................................................................................................................ 15 LED Indicator ........................................................................................................... 16 Basic Operations ............................................................................................................. 17 Turning the Terminal On/Off ..................................................................................... 17 Adjusting the Volume ............................................................................................... 17 Selecting a Talk Group ............................................................................................. 17 Locking/Unlocking the Keypad ................................................................................. 17 Switching Operation Mode ....................................................................................... 18 Call ........................................................................................................................... 19 Menu Navigation ............................................................................................................. 22 PhoneBook .............................................................................................................. 22 Message .................................................................................................................. 23 Call Log .................................................................................................................... 25 Profiles ..................................................................................................................... 25 Settings .................................................................................................................... 26 Others ...................................................................................................................... 29 Options .................................................................................................................... 31 Troubleshooting .............................................................................................................. 35 Care and Cleaning .......................................................................................................... 36 Optional Accessories ....................................................................................................... 37 Appendix 1 Input Method ................................................................................................ 37 Appendix 2 SSI&TSI Dialing Rules ................................................................................. 39 5 Checking Items in the Package Please unpack carefully and check that all items listed below are received. If any item is missing or damaged, please contact your dealer. Battery Charger Power Adapter Antenna Belt Clip Strap Owners Manual Safety Information Booklet Quick Reference Guide Portable Terminal 6 Note: Frequency band is marked on the label of antenna; if not, please refer to the label on the terminal for frequency band information. Product Overview Terminal Controls Part Name No. Part Name SK1 (programmable) SK2 (programmable) LED Indicator 2 4 6 PTT Key Emergency Key Antenna No. 1 3 5 7 Encoder/channel selector 8 Receiver knob Translucent TFT Color Display Speaker Duplex Microphone Simplex Microphone Accessory Jack Belt Clip Battery Charging pole 10 12 14 16 18 20 22 Function Keypad Numeric Keypad Volume Control knob Accessory Jack Cover Strap Hole Battery Battery latch 7 9 11 13 15 17 19 21 Function Keypad Programmable Keys Most of the terminals keys including SK1, SK2, four Navigation Keys, Call Key, numeric keys 1-9, Then you may quickly access menus or features through press of a key.
, can be set as shortcuts to terminal functions or menus. and Available options are:
PhoneBook
Create Message 8
Inbox
Outbox
Drafts
Dialed Calls
Received Calls
Missed Calls
Profiles
Date&Time
Keypad Lock
Display Saver
PIN Code
Change PIN Code
My Info
Calendar
Select Mode Note: Long and short press of SK1 or SK2 can be assigned with different functions. Before Use Charging the Battery Only use the charger and battery specified by Hytera. The charge LED will indicate the charging progress. 9 Procedures 1. Connect the power adapter to an AC source socket. See arrows
. 2. Place the terminal with the battery attached into the charger. See arrow . Make sure the batterys charging pieces are in good contact with the chargers terminals. 3. The charging process begins when the charger LED solidly glows red. 4. When charging is complete, green LED glows. Then remove the battery or the terminal from the charger. The standard 1800mAh Li-Ion battery may take 3 hours for an ordinary charge. But before initial use, please charge it for 5 hours to achieve optimal battery performance. LED Indications and Charging Progress LED Indicator Status LED flashes red slowly. Standby (no load) LED solidly glows red. Charging LED solidly glows orange. Charging (above 85%) LED solidly glows green. Fully charged 10 LED flashes red rapidly. Failure Note: Be sure to read the Safety Information Booklet, to get necessary safety information. Assembly and Disassembly Attaching the SIM Card 1. Open the SIM card cover by loosening screw, and insert the SIM card properly into the holder. 2. Close the SIM card cover ,and fasten the screw tightly . Apply step 1 when you need to take out the SIM card. 11 Note: SIM card related services are not supported by the terminal currently, and require future software upgrade. Attaching the Antenna Turn the antenna clockwise to fasten it. To remove the antenna, rotate it counter-clockwise. Attaching the Battery 1. Fit the extensions at the top of the battery into the slot at the top of the terminals body. 2. Slightly press the bottom of the battery until a click is heard, Note: If the battery is loose or unsecured, please remove and attach it again. 12 To remove the battery, turn off the terminal first. Then slide the battery latch upwards to unlock the battery. Attaching the Belt Clip 1. Remove the screws in the main radio. 2. Align the screw holes on the belt clip with those on the terminals body, and then tighten the screws. To remove the belt clip, loosen the screws. Attaching Accessories 1. Open the accessory jack cover as the arrow shown. 2. Align the plug with the accessory jack. 13 3. Tighten the screw on the plug. To remove accessories, loosen the screw. Important Instructions Caution:
If audio quality deteriorates after the terminal is exposed to water, ingress of water 1. into the speaker holes may be the reason. 2. To solve this problem, smack the terminal against your palm with the front cover facing your palm, so that water can flow out of the speaker holes. Then wipe the terminal with a lint-free dry cloth. After the terminal is totally air dried, the audio quality will recover. 3. To avoid serious damage due to water intrusion into the terminal, DO NOT destroy or tear down the label on the chassis, especially the label covering the air vent. 4. To avoid serious damage due to water intrusion into the battery, DO NOT destroy or tear down the label on the battery, especially the label covering the air vent. 5. If the battery is damaged as a result of accidental drop, water protection (IP56) will 14 not be guaranteed unless you replace it with a new and approved one. Below texts should be deleted IP Code --
The IP Code is a designation that indicates the level of protection against ingress of solid foreign objects and water. It consists of the letters IP (International Protection) followed by two numerals. Take IP56 for example:
Status Indicators LCD Icons The LCD of your terminal displays the terminal status, text entries, and menu items. The following are the icons that appear on the terminals display.
Standby Interface 15
Status Icons (TMO and DMO) Icon Name Icon Terminal Status Low battery More bars indicate more battery power No signal More bars indicate better signal strength Unread message Inbox is full and all are unread messages The terminal currently operates in TMO mode The terminal currently operates in DMO mode Silent Normal (ring and vibration) Vibration only An audio accessory is connected A call is in progress Selecting a talk group Battery Strength Icons RSSI Message Icons Operation Mode Icons Profiles Icons Accessory Icon Call Icon Talkgroup Selection Icon LED Indicator The top LED indicator will help you easily identify current terminal status. Terminal Status LED Indicator Transmitting a call LED solidly glows red. Receiving a call LED solidly glows green. Telephone Call LED solidly glows red on both parties. Low battery LED flashes red slowly. DMO mode channel free DMO mode channel busy LED flashes green slowly. LED solidly glows orange. 16 Basic Operations Turning the Terminal On/Off To turn the terminal on, hold down the Power On/Off key until the terminal shows the power-up screen. To turn the terminal off, long press the Power On/Off key. Adjusting the Volume You may adjust call volume through the knob. Rotate the knob clockwise to increase the volume, or counter-clockwise to decrease the volume. Then press OK to save the volume. To adjust alert tone volume, go to Profiles->Normal->Settings->AlertVolume. Selecting a Talk Group 1. In the home screen, press the knob to switch it to talk group selection mode (the terminal displays the icon
). 2. Then rotate the knob to select your desired talk group. 3. Name of the current talk group will appear on the home screen. You may also set a talk group as the default group. Go to Options->Talk Group->Selected List. See Selected List for more details. Note: Pressing PTT in the home screen will transmit a group call to the current talk group. Locking/Unlocking the Keypad To lock or unlock the keypad, press OK and then
. When the keypad is locked, you can also answer and reply to calls. After a call is 17 completed, the keypad will return to be locked. Switching Operation Mode You may switch the terminal between TMO and DMO through any of the following methods:
1. Menu selection Press the Options key to access the menu, and then select TMO or DMO.
[Options]
DMO Options TMO Options Talk Group TMO Language GPS Talk Group DMO Language GPS 2. Function key press In the home screen, press the Select Mode key to switch between TMO and DMO. 18 Call Individual Call
Transmitting an Individual Call DMO Mode 1. Input the number you want to call through the keypad, or go to the menu PhoneBook or Call Log to select the contact you want to call. 2. Then hold down the PTT and speak into the microphone, to transmit a simplex call. TMO Mode
Transmitting a call through menu 1. Go to the menu PhoneBook or Call Log to select the contact you want to call. 2. Hold down the PTT to transmit a simplex call, or press to transmit a duplex call.
Transmitting a call through Manual Dial 1. Input the number you want to call through the keypad. 2. Press Ctype to select Private No (it will appear on the screen). 3. Hold down the PTT to transmit a simplex call, or press to transmit a duplex call. Note: Entry of private number must comply with the SSI&TSI dialing rules. See Appendix 2 SSI&TSI Dialing Rules for more details.
Receiving and Responding to an Individual Call DMO Mode When the PTT is in released state, the terminal is always ready to receive calls. When the other party stops talking, you can hold down the PTT to call back. TMO Mode
Simplex Call When a simplex call is received, you can receive without any operation, unless the 19 LCD prompts you to press the PTT to answer a call. When the other party stops talking, you can hold down the PTT and speak into the microphone to call back.
Duplex Call When a duplex call is received, you can press speak simultaneously without any operation. to receive. And both parties can Group Call Available talk groups are preset by your dealer. DMO mode supports up to 1024 talk groups, and TMO mode supports up to 2048 talk groups. Both DMO and TMO support group call, and operations are the same in both modes.
Transmitting a Group Call 1. In the home screen, press the knob to switch it to talk group selection mode (the terminal displays the icon
). 2. Rotate the knob to select a talk group you want to call. 3. Press the knob again or press OK to confirm. 4. Hold down the PTT to transmit a group call. Note:
In TMO mode, you can transmit a group call to a talk group only after it is attached successfully. If you failed to attach a talk group, the reason may be that the group does not exist in the network, or you are out of the network coverage.
Receiving and Responding to a Group Call When a group call is received, you need not make any operation. When the calling party stops talking, you can hold down the PTT and speak into the microphone to call back. 20 Telephone Call
Transmitting a Telephone Call 1. Input the number you want to call through the keypad. 2. Press Ctype to select PABX or PSTN (it will appear on the screen). 3. Press to transmit a telephone call.
Answering a Telephone Call When a telephone call is received, you can press parties can speak simultaneously without any operation. to answer the call. And both To reject or to hang up a telephone call, press
. Note: The terminal must be set with appropriate Gateway No. Please contact your network operator for more details. Emergency Call Both DMO and TMO support emergency call, and operations are the same in both modes. Long press the top Emergency key to transmit an emergency call. To terminate the call, press
. In DMO mode, emergency calls are transmitted to the default talk group. And in TMO mode, the target receiver is programmable through the programming software. Note: Please speak into the duplex microphone when sending a duplex call, or the simplex microphone when sending a simplex call. 21 Menu Navigation Press the Function key to access the menu list. The operations in TMO mode are the same as that in DMO mode. Here we are going to introduce all menu items based on TMO mode. PhoneBook 22 This menu is used to store your contact information. It can contain up to 512 entries. Each entry consists of contact name and contact number. To access this menu, press Func ->
PhoneBook in idle mode, and then you can perform these operations:
Create new contact View a contact Modify a contact Delete a contact Delete all contacts View phonebook memory Search a contact (by name) Call a contact With this menu, you can make a duplex (for TMO only) or simplex call to a contact. The method is as follows:
1. Select a contact from the menu;
2. Press and hold down PTT key to make a simplex call, or press to make a duplex call. Alternatively, you can make a duplex call by selecting Options -> Call. Message Create Message
(1) Status Message Status Message is predefined by your dealer. You can choose to read and send them, but no editing is available.
(2) User Message 23 This option allows you to create a new text message with 140 bytes at most. The receiving party can either be an individual or a group. Inbox All received messages are saved here. It can contain up to 50 entries. When a new message arrives, the icon will appear in the status bar. Press View to read the new message right away or press Back to view it later. When the inbox is overflowed with unread messages, the icon will appear in the status bar. Please sort your inbox in time to receive more messages. For any message, you can perform these operations:
Reply: to reply to the message sender;
Delete: to delete the current message;
Delete All: to delete all received messages;
Individual: to forward the message to an individual user;
Group: to forward the message to a group;
Edit: to edit the content of the message;
Extract No.: to extract the number;
Call: to call the message sender. Outbox The outbox can save up to 20 sent messages. The operations available for any message in outbox are: Delete, Delete All, Individual, Group, Edit (available to User Message only) Extract No., and Call. Drafts You can save up to 10 drafted messages here. For any message, you can choose to delete, edit or send it. 24 Call Log This terminal can save up to 20 entries in the option Dialed Calls, Received Calls and Missed Calls respectively. When there is a missed call, appropriate indications will be given on the display. After selecting an entry, these options are available: Call, View, Save, Delete, Delete All. Profiles Normal In this mode, the terminal will alert you to an incoming call or a new message by giving ring or vibration indication. To match your actual needs and preferences, you can customize the following parameters:
Alert Volume You can decrease or increase the volume level using Left or Right navigation key.
Alert Type 25 You can use Left or Right key to select your desired alert type for an incoming call, a new message or keypad press. For an incoming call or a new message, the available options include: Off, Ring, Vibra and Rg&Vb; for keypad press, the available options include On and Off.
Ring Tone You can use Left or Right key to select your desired alert tone for an incoming call or a new message. Silent In this mode, no ring or vibration indication will be given when a new call or new message arrives. Vibration In this mode, only vibration indication will be given when a new call or new message arrives. Settings 26 Date&Time This option allows you to set the current date, time and time format. The method is as follows:
To set date and time Press Left or Right key to select the item to be set, and then input the right value through keypad. When the current time is displayed in 12 Hour format, press Up or Down key to toggle it between AM and PM.
To set time format You can toggle the time format between 24H and 12H using Left or Right key. When all settings are done, press OK to make them take effect. KP Lock This option allows you to enable or disable the Auto Keypad Lock feature. If it is enabled, the keypad will be locked automatically after the programmed time (10 seconds by default) elapses. DispSaver This option allows you to enable or disable the screensaver. If enabled, it will be activated automatically after the programmed time (15 seconds by default) elapses. Display 27
Invert Disp This option allows you to invert the displayed information by 180 so that you can access it easily. Note: when the display is inverted, the function of OK key and Back key exchanges.
Brightness You can use Left or Right key to adjust the brightness level.
KP Light This option allows you to enable or disable keypad light. The lighting duration is programmable with the programming software.
Light Sense When this feature is enabled, the terminal will sense the ambient lighting conditions automatically to determine the brightness of backlight. Security
PIN Code To set PIN code On or Off, you will be required to input the PIN code. The terminal will be locked when wrong PIN code is entered up to the predefined times. To unlock it, you need to enter the right PUK code. Then the terminal will bring you to an interface, where you can reset your PIN code or press Back key to restore it to default value. However, when wrong PUK code is entered up to the predefined times, the terminal will be disabled 28 temporarily and shows Radio Disabled. Note: the number of times that you are allowed to input wrong PIN or PUK code is programmable through the programming software. When the terminal is disabled, contact your dealer to activate it. The default PIN code is 1234, and the default PUK code is 12345678.
Change PIN code This option allows you to change the PIN code. Before changing it, you need to enter the old PIN code correctly. Then you will be asked to input your new PIN code twice. Please make sure the codes you entered are identical; otherwise, you have to reset it again. Man Down When this feature is enabled, the terminal will send an emergency call to the predefined ID automatically once it falls over or tilts by 45. At the same time, it would sound sharp alarm tone. With this feature, you can enjoy enhanced personal protection. Reset All This option allows you to restore all settings to default value. To perform this operation, you need to input the right PIN code. Others 29 My Info Under this option you can view some basic information about the terminal, including MCC, MNC and ISSI. Shortcuts To enhance operation convenience, you can assign your desired function to a specific key as shortcut. Then you can press the key to access a function easily.
To create a shortcut 1. Select Shortcuts to access the list of shortcut keys;
2. Select your desired key, and press Modify to access the list of assignable functions;
3. Select your desired function, and press OK to confirm.
To cancel a shortcut 1. Select Shortcuts to access the list of shortcut keys;
2. Select the shortcut key to be cancelled, and press Modify to access the list of assignable functions;
3. Select Empty, and press OK to confirm. Calendar This option allows you to view calendar information. 30 Options OptionsMenu for TMO OptionsMenu for DMO In the home screen, press Options to access this menu. Here we are going to introduce all menu items based on TMO mode.
Talk Group Under this option, you will see Selected List, Scan List, and one or more static folders created through programming software, as shown in following picture:
Selected List Under this option, you can set a talk group as the default group. Alternatively, you can do so by rotating the knob in the home screen. The default group is indicated by the icon
, as shown in following picture. In the home screen, you can make a group call to the default group by pressing PTT key directly. To add groups to the Selected List, enter a static folder, and select As SltList from Options. 31
Scan List You can receive calls only from groups that are included in the scan list and have been attached successfully (indicated by the icon
). But you can always receive from the default group and the emergency group, regardless of the foregoing condition. After entering the scan list, you can perform the following operations:
Scan On: to enable Scan feature and to attach all talk groups in the scan list;
Scan Off: to disable Scan feature and to detach all talk groups except background group, default group and emergency group. Scan: to attach all talk groups in the scan list. To add groups to the Scan List, enter a static folder, and select As ScanList from Options. Note: Scan List is available for TMO mode only.
Static Folder After accessing any of the folders, you can perform the following operations:
Add: to include a talk group into the current folder;
Delete: to remove a talk group from the current folder;
Delete All: to remove all talk groups from the current folder. As SltList: to add all talk groups in the current folder to Selected List;
As Scan List: to add all talk groups in the current folder to Scan List. 32
DMO You can use this option to make your terminal work in DMO mode. In DMO mode, this option shall be TMO. Likewise, you can use it to make your terminal work in TMO mode.
Language This option allows you to select your favorable language. Currently, this terminal only supports English and Simplified Chinese.
GPS
Display of GPS Data GPS data includes date, time, longitude, latitude, altitude, and number of satellites. Date and time are correlative to the selected time zone.
Adjust Time 33 This option allows you to calibrate the time currently displayed on your terminal with GPS time, and is correlative to the Time Zone option.
Data Transmit You may choose to transmit GPS data to an individual user, a group of users, or the control center. This option is correlative to the Send Mode option. Operations to send GPS data are similar to that of short message. Received GPS data are saved in Message->Inbox. Individual To transmit GPS data to an individual user. Group To transmit GPS data to all users included in a certain group. Note: To implement the Data Transmit function, the terminal must operate in TMO mode. And GPS data is deemed valid only when the GPS receiver has received data from at least 3 satellites. Otherwise, GPS data invalid will appear on the screen when you attempt to transmit GPS data.
GPS Setup You may set the time zone and select a method to transmit GPS data. Time Zone You may select a time zone according to terminal location or your preference. There are 25 available time zones, used for time calibration. Send Mode You may choose whether to send GPS data to a specified target periodically. The transmission interval is programmable by your dealer. There are two transmission modes available:
Manual Send To manually transmit GPS data to other terminals.
Auto Send To periodically transmit GPS data to other terminals. 34 Troubleshooting Symptom Solution The terminal can not be Please check whether battery power is too low or whether powered on. the battery fails to function. 1. Please check the signal strength and see whether your terminal is within the network coverage. Network registration fails or 2. Contact the network administrator, and confirm network can not be found. whether the terminal has acquired appropriate Unable to make a call authorization. 3. Check whether your terminal is in TMO mode. 1. Please check the signal strength and see whether your terminal is within the network coverage. 2. Check whether the called party is within the network coverage. 1. Check whether your terminal is a member of the Unable to call or receive from a target group. specific group. 2. Check whether your terminal is authorized to access the target group. Unable to make a call in DMO 1. The called party is out of coverage. mode 2. The called party is not in DMO mode. Half duplex transmission is terminated. Normal call is interrupted. For the same status message, the content displayed at the sending party and at the Overlong time of transmission makes the timer expire. Check whether a terminal is making a pre-emptive priority call or emergency call. Please check whether both parties have assigned the same content for this status message ID. 35 receiving party varies. Abnormal disconnection during a call 1. Check the signal strength in TMO mode. 2. Check whether you are in a place where the signals can be shielded (such as basement and tunnel) and whether the other party is out of coverage. 3. Check the battery strength. Note: If the above solutions can not fix your problems, or you may have some other queries, please contact us or your local dealer for more technical support. Care and Cleaning To guarantee optimal performance as well as a long service life of your terminal, please follow the tips below. Terminal Care
Keep the terminal far away from substances that can corrode the electronic circuit;
Do not hold the terminal by its antenna or earpiece cable directly;
Attach the accessory jack cover when accessory is not connected. Terminal Cleaning
Clean up the dust and fine particles on the terminal parts with a clean and dry lint-free cloth or a brush regularly.
Use a non-woven cloth with neutral cleanser to clean the keys, control knobs, LCD and jacks after long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil preparations. Make sure the terminal is completely dry before use. Caution: Power off the terminal and remove the battery before cleaning. 36 Optional Accessories The following items are the main optional accessories for the terminal, and please consult your local dealer for more other accessories. Remote Microphone SM18N1 Speaker
(IP57) Earbud with on-MIC PTT ESN10 D-earset with in-line Microphone EHN12 Earpiece with on-MIC PTT & Transparent Acoustic Tube EAN16 Surveillance 3-Wire Earpiece with Transparent Acoustic Tube (beige) EAN17 Vehicle CHV09 Adapter Leather Case LCY002 Carrying
(swivel) Cable to serial port) Programming
(USB PC36 Note: Use the accessories specified by Hytera only. If not, Hytera shall not be liable for any losses or damages arising out of use of unauthorized accessories. Appendix 1 Input Method You can enter aliases, numbers or messages using the keypad. This terminal supports these input methods: Simplified Chinese Pinyin (), English (ABC/abc) and Number 37
(123).
Switch of Input Method In input mode, press to switch to your desired input method. The appropriate symbol will appear on top right corner of the screen;
Simplified Chinese Pinyin Enter the pinyin through alphanumeric keys; then a list of possible combinations and corresponding characters will appear; For example, to input the Chinese character
:
1. Press
,
, and in order;
2. Press OK to move the cursor from Pinyin area to Chinese character area;
3. Use the navigation keys to scroll to the target character ;
4. Press the OK key to enter the selected character.
Switch between Uppercase and Lowercase In input mode, press to switch to your desired input method. All English letters are distributed among 8 alphanumeric keys. Press appropriate key repeatedly to get and enter your desired letter
Number When the input method is switched to Number, press appropriate key to enter your desired number.
Punctuation In Simplified Chinese Pinyin/English mode, press to enter your desired punctuations; while in Number mode, it is not allowed to enter any punctuation.
Space 38 In English/Number mode, long press to enter a space, and short press it to enter *;
To enter a space in Simplified Chinese Pinyin mode, press and then select the space (the first one). Note: short press Back key to delete the entered character one by one, or long press it to delete all entered characters at a time. Appendix 2 SSI&TSI Dialing Rules This terminal supports these dialing methods: SSI&TSI, PABX and PSTN. Each method shall follow a specific dialing rule. Currently, this terminal is only capable of checking SSI&TSI dialing rules. When you want to call a PABX or PSTN subscriber, please input the target number directly through the keypad. SSI&TSI dialing rules are as follows:
For target number less than 8 digits, input it directly;
For example, when MCC = default value, MNC = default value and ISSI = 504, you just need to input 504 or 00000504 to make the call;
For target number with 9-13 digits, input MNC+ISSI;
In this case, ISSI must be 8 digits long, and add 0 before the first digit to supplement the balance when it is less than the said length. For MNC, input it as it is. For example, when MCC=default value, MNC=20 and ISSI=504, you need to input 2000000504 or 0002000000504 to make the call;
For target number over 13 digits, input MCC+MNC+ISSI;
In this case, ISSI must be 8 digits long, MNC must be 4 or 5 digits long and MCC must be 3 digits long. Add 0 before the first digit to supplement the balance when any of them is less than the said length;
For example, when MCC = 460, MNC = 20 and ISSI = 504, you need to input 4600002000000504 or 460002000000504 to make the call. 39 Note: MCC stands for Mobile Country Code, MNC stands for Mobile Network Code and ISSI stands for Individual Short Subscriber Identity. 40
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-12-30 | 450.025 ~ 469.975 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Original Equipment |
2 | 2402 ~ 2480 | DTS - Digital Transmission System | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2015-12-30
|
||||
1 2 3 | Applicant's complete, legal business name |
Hytera Communications Corporation Limited
|
||||
1 2 3 | FCC Registration Number (FRN) |
0019701887
|
||||
1 2 3 | Physical Address |
Hytera Tower, Hi-Tech Industrial Park North
|
||||
1 2 3 |
Shenzhen, N/A 518057
|
|||||
1 2 3 |
China
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
V******@tuvam.com
|
||||
1 2 3 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
1 2 3 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
YAM
|
||||
1 2 3 | Equipment Product Code |
PT580HPF4
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
T******** C********
|
||||
1 2 3 | Title |
Certification Engineer
|
||||
1 2 3 | Telephone Number |
+86-7********
|
||||
1 2 3 | Fax Number |
+86-7********
|
||||
1 2 3 |
t******@hytera.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/22/2016 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | TETRA TERMINAL with Bluetooth and GPS | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power is conducted for Part 90 antenna gain 0.5dBi. SAR compliance for front-of-face operating configurations requires a minimum separation distance of 25 mm to be maintained. End-users must be informed of the front-of-face operating requirements for satisfying RF exposure compliance. The highest reported SAR for face, body-worn and simultaneous transmission are 0.21 W/kg, 0.43 W/kg and 0.63 W/kg respectively. | ||||
1 2 3 | Output power is conducted. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Shenzhen Huatongwei International Insp. Co., Ltd
|
||||
1 2 3 | Name |
M**** Y******
|
||||
1 2 3 | Telephone Number |
86-75********
|
||||
1 2 3 | Fax Number |
86-75********
|
||||
1 2 3 |
m******@szhtw.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 9 | 450.025 | 469.975 | 2.75 | 89 Hz | 20K3GXW | ||||||||||||||||||||||||||||||||||
1 | 2 | 9 | 450.025 | 469.975 | 2.75 | 96 Hz | 20K3GXW | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC