FCC ID: TQ8-ACB10GHGN DIGITAL CAR AUDIO SYSTEM

 

H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 1 Multimedia System Audio (Without Touch Screen)...............................4-

System layout - control panel.........................................4-

System layout - steering wheel remote control.........4-

Turning the system on or off ..........................................4-

Turning the display on or off...........................................4-

Getting to know the basic operations............................4-

Radio ..........................................................................4-

Turning on the radio...........................................................4-

Changing the radio mode ..................................................4-

Scanning for available radio stations.............................4-

Searching for radio stations.............................................4-

Saving radio stations ..........................................................4-

Listening to saved radio stations ....................................4-

Media Player.............................................................4-

Using the media player......................................................4-

Using the USB mode...........................................................4-

Using the AUX mode ..........................................................4-

Bluetooth...................................................................4-

Connecting Bluetooth devices..........................................4-

Using a Bluetooth audio device.......................................4-

Using a Bluetooth phone...................................................4-

System Status Icons ................................................4-

Audio System Specifications..................................4-

USB..........................................................................................4-

Bluetooth ...............................................................................4-

Trademarks ...............................................................4-

Declaration of Conformity......................................4-

ANATEL for Brazil ...............................................................4-

4 H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 2 Multimedia System AUDIO (Without Touch Screen) System layout control panel

(1) RADIO button

Press to display the radio mode selec-

tion window.

When the mode selection window dis-

plays, turn the [TUNE] knob to select the desired mode and then press the knob.

When the Mode popup is not selected in [MENU/CLOCK] Mode Popup, press the [RADIO] button on the control panel to change the mode. Each time you press the [RADIO] button on the control panel, the mode switches to radio FM AM in order.

(2) MEDIA button

Press to display the media mode selec-

tion window.

When the mode selection window dis-

plays, turn the [TUNE] knob to select the desired mode and then press the knob.

When the Mode popup is not selected in [MENU/CLOCK] Mode Popup, press the [MEDIA] button on the control panel to change the mode. Each time you press the [MEDIA] button on the control panel, the mode switches to media USB AUX in order. The actual features in the vehicle may differ from the illustration.

(3) FAV button

While listening to the radio, press to move to next page of the preset list.

(4) POWER button/VOL knob

Press to turn the system on or off.

Turn to the left or right to adjust the sys-

tem sound volume.

(5) SEEK/TRACK button

Change the station/track/file (except for the AUX mode). 4-2 H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 3 4 M u l t i i m e d a S y s t e m

While listening to the radio, press and hold to search for a station.

While playing media, press and hold to rewind or fast forward (except for the AUX mode).

(6) MENU button/CLOCK button

Press to access the menu screen for the current mode.

Press and hold to access the time setup screen.

(7) TUNE knob/FILE knob/ENTER button

While listening to the radio, turn to adjust the frequency.

While playing media, turn to search for a track/file (except for the AUX mode).

During a search, press to select the current track/file. The actual features in the vehicle may differ from the illustration.

(8) Number buttons (1 RPT~ 4 BACK)

While listening to the radio, press to lis-

ten to a saved radio station.

While listening to the radio, press and hold to save the current radio station to the preset.

In the USB mode, press the [1 RPT]

button to change the repeat play mode. Press the [2 SHFL] button to change the shuffle play mode.

Press the [4 BACK] button to return to the previous screen (except for the radio preset list). 4-3 H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 4 Multimedia System

(1) AUDIO button

Press to display the radio/media mode selection window.

When the mode selection window dis-

plays, turn the [TUNE] knob to select the desired mode and then press the knob.

When the Mode popup is not selected in [MENU/CLOCK] Mode Popup, press the [AUDIO] button on the control panel to change the mode. Each time you press the [AUDIO] button on the control panel, the mode switches to radio media in order.

(With BluetoothWireless Technology)

(2) PHONE button

Press to start connecting a mobile phone via Bluetooth.

After a Bluetooth phone connection is made, press to access the Bluetooth phone menu.

(3) FAV button

While listening to the radio, press to move to next page of the preset list. The actual features in the vehicle may differ from the illustration. 4-4

(4) POWER button/VOL knob

Press to turn the system on or off.

Turn to the left or right to adjust the sys-

tem sound volume.

(5) SEEK/TRACK button

Change the station/track/file (except for the AUX mode).

While listening to the radio, press and hold to search for a station.

While playing media, press and hold to rewind or fast forward (except for the AUX and Bluetooth audio modes). H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 5 4

(6) MENU button/CLOCK button

Press to access the menu screen for the current mode.

Press and hold to access the time setup screen.

(With BluetoothWireless Technology)

(7) TUNE knob/FILE knob/ENTER button

While listening to the radio, turn to adjust the frequency.

While playing media, turn to search for a track/file (except for the AUX and Bluetooth audio modes).

During a search, press to select the current track/file. The actual features in the vehicle may differ from the illustration.

(8) Number buttons (1 RPT~ 4 BACK)

While listening to the radio, press to lis-

ten to a saved radio station.

While listening to the radio, press and hold to save the current radio station to the preset.

In the USB/Bluetooth audio modes, press the [1 RPT] button to change the repeat play mode. Press the [2 SHFL]

button to change the shuffle play mode.

Press the [4 BACK] button to return to the previous screen (except for the radio preset list). 4-5 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 6 Multimedia System System layout steering wheel remote control

(1) MODE button

Press to switch between radio and media modes.

Press and hold to turn the system on or off.

(2) Volume lever

Push up or down to adjust the volume.

(3) Up/Down lever

Change the

(except for the AUX mode). station/track/file

While listening to the radio, push to listen to the previous/next saved radio station.

While listening to the radio, push and hold to search for a station.

While playing media, push and hold to rewind or fast forward

(except for the AUX and Bluetooth audio* mode).

*if equipped

(Bluetooth equipped model) The actual features in the vehicle may differ from the illustration. 4-6

(4) MUTE button

Press to mute or unmute the system.

During a call, press to mute or unmute the microphone.

While playing media, press to pause or resume playback.

(5) Call/Answer button (if equipped)

Press to start connecting a mobile phone via Bluetooth.

After a Bluetooth phone connec-

tion is made, press to access your call history. Press and hold to dial the most recent phone number. When a call comes in, press to answer the call.

During a call, press to switch between the active call and the held call. Press and hold to switch the call between the system and the mobile phone.

(6) Call end button (if equipped) H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 7 WARNING

- About driving

Do not operate the system while driving. Driving while distracted may result in a loss of vehicle control, potentially leading to an accident, severe personal injury, or death. The drivers primary responsibility is the safe and legal operation of a vehicle, and any handheld devices, equipment, or vehicle systems which divert the dri-

vers attention this responsibility should never be used during operation of the vehicle. from

Avoid watching the screen while driving. Driving while distracted may lead to a traffic accident. Stop your vehicle in a safe location before using functions that require multiple operations.

Stop your vehicle first before using your mobile phone. Using a mobile phone while driving may lead to a traffic accident. If necessary, use the Bluetooth Handsfree feature to make calls and keep the call as short as possible.

Keep the volume low enough to hear external sounds. Driving without the ability to hear external sounds may lead to a traffic accident. Listening to a loud volume for a long time may cause hear-

ing damage. WARNING

- About handling the system

Do not disassemble or modify the system. Doing so may result in an accident, fire, or electric shock.

Do not allow liquids or foreign substances to enter the sys-

tem. Liquids or foreign sub-

stances may cause noxious fumes, a fire, or a system mal-

function.

Stop using the system if it malfunctions, such as no audio output or display. If you continue using the system when it is malfunctioning, it may lead to a fire, electric shock, or system failure.

Do not touch the antenna dur-

ing lightning because such an act may cause electric shock. thunder or 4-7 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 8 NOTICE

If you experience any problems with the system, contact your place of purchase or dealer.

Placing the audio system within an electromagnetic environment may result in noise interference. Multimedia System i Information

- About operating the system Use the system with the engine run-

ning. Using the system for a long time when the engine is stopped may discharge the battery. Do not install unapproved products. Using unapproved products may cause an error while using the sys-

tem. System errors caused by installing unapproved products are not covered under the warranty. i Information

- About handling the system Do not apply excessive force to the system. Excessive pressure on the screen may damage the LCD panel or the touch panel. When cleaning the screen or button panel, make sure to stop the engine and use a soft, dry cloth. Wiping the screen or buttons with a rough cloth or using solvents (alcohol, benzene, paint thinner, etc.) may scratch or chemically damage the surface. If you attach a liquid-type air fresh-

ener to the fan louvre, the surface of the louvre may become deformed due to the flowing air. If you want to change the position of the installed device, please inquire with your place of purchase or serv-

ice maintenance centre. Technical expertise is required to install or dis-

assemble the device. 4-8 H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 9 Turning the display on or off To prevent glare, you can turn off the screen. The screen can be turned off only while the system is on. 1. On the control panel, press the

[MENU/CLOCK] button. 2. When the option selection window displays, turn the [TUNE] knob to select Display off, and then press the knob.

To turn the screen back on, press any of the control panel buttons. Turning the system on or off To turn on the system, start the engine.

If you do not want to use the sys-

tem while driving, you can turn off the system by pressing the

[POWER] button on the control panel. To use the system again, press the [POWER] button again. The system turns off when you stop the engine (ACC Off).

When you turn back on the sys-

tem, the previous mode and set-

tings will remain intact. WARNING

Some functions may be dis-

abled for safety reasons while the vehicle is moving. They work only when the vehicle stops. Park your vehicle in a safe location before using any of them.

Stop using the system if it malfunctions, such as no audio output or display. If you continue using the system when it is malfunctioning, it may lead to a fire, electric shock, or system failure. i Information You can turn on the system when the key ignition switch is placed in the ACC or ON position. Using the system for an extended period without the engine running drains the battery. If you plan on using the system for a long time, start the engine 4-9 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 10 Multimedia System Getting to know the basic operations You can select an item or adjust the settings by using the number buttons and the [TUNE] knob on the control panel. Selecting an item Numbered items Press the corresponding number button. Numberless items Turn the [TUNE] knob to select the desired item, and then press the knob. Adjusting the settings Turn the [TUNE] knob to adjust the value, and then press the knob to save changes. Turn the [TUNE] knob to the right to increase the value and turn the

[TUNE] knob to the left to decrease the value. 4-10 H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 11 RADIO Turning on the radio 1. On the control panel, press the

[AUDIO] button. 2. When the mode selection window displays, turn the [TUNE] knob to select the desired radio mode and then press the knob. FM/AM Mode

(1) Current radio mode

(2) Radio station information

(3) Preset list Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

Autostore: Save radio stations to the preset list.

Scan: The system searches for radio stations with strong radio sig-

nals and plays each radio station for about five seconds.

Sound Settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

- Position: Select a location where sound will be concentrat-

ed in the vehicle. Select Fader or Balance, turn the [TUNE] knob to select the desired position, and then press the knob. To set sound to be centred in the vehi-

cle, select Center.

- Tone: Adjust the output level for each sound tone mode.

- Speed Dependent Vol.: Set the volume to be adjusted automati-

cally according to your driving speed. (if equipped) NOTICE

Depending on vehicle models or specifications, available options may vary.

Depending on the system or amplifier specifications applied to your vehicle, available options may vary.

Mode Popup: Set to display mode selection window when the [AUDIO]

button is pressed on the control panel.

Date/Time: You can change the date and time that are shown on the system display.

- Set Date: Set date to display on the system display.

- Set Time: Set time to display on the system display.

- Time Format: Select to display time in the 12 hour format or the 24 hour format.

- Display (Power Off): Set to dis-

play the clock when the system power is off.

Language: You can change the display language. 4-11 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 12 Multimedia System Changing the radio mode 1. On the control panel, press the

[AUDIO] button. 2. When the mode selection window displays, turn the [TUNE] knob to select the desired radio mode and then press the knob.

Each the

[MODE] button on the steering wheel, the radio mode switches to FM AM in order. time you press NOTICE

When the Mode popup is not selected in [MENU/CLOCK] Mode Popup, press the [AUDIO]

button on the control panel to change the radio mode. Each time you press the [AUDIO]

button on the control panel, the radio mode switches to FM AM in order. 4-12 Searching for radio stations To search for the previous or next available radio station, press the

[ SEEK] button / [TRACK ] button on the control panel.

You can also press and hold the

[ SEEK] button / [TRACK ] but-

ton to search for frequencies quick-

ly. When you release the button, a radio station with a strong signal is selected automatically. If you know the exact frequency of the radio station you want to listen to, turn the [TUNE] knob on the control panel to change the frequency. Scanning for available radio stations You can listen to each radio station for a few seconds to test the recep-

tion and select the one you want. 1. From the radio screen, press the

[MENU/CLOCK] button on the control panel. 2. When the option selection window displays, turn the [TUNE] knob to select Scan, and then press the knob.

The system searches for radio stations with strong radio sig-

nals and plays each radio sta-

tion for about five seconds. 3. When you find the radio station you want to listen to, press the

[TUNE] knob.

You can continue listening to the selected station. H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 13 Using the auto save function You can search for radio stations in your area where there is a strong sig-

nal. The results of your search can be saved to the preset list automati-

cally. 1. From the radio screen, press the

[MENU/CLOCK] button on the control panel. 2. When the option selection window displays, turn the [TUNE] knob to select Autostore, and then press the knob. Listening to saved radio stations FM/AM Mode 1. Confirm the preset number for the radio station you want to listen to.

To view the next page of the pre-

set list, press the [FAV] button. 2. On the control panel, press the desired number button.

Alternatively, push the Up/Down lever on the steering wheel to change the station. Saving radio stations You can save your favorite radio sta-

tions and listen to them by selecting them from the preset list. Saving the current radio station While listening to the radio, press and hold the desired number button on the control panel.

The radio station you are listening to will be added to the selected number.

To save the next page of the preset list, press the [FAV] button. NOTICE

You can save up to 12 radio sta-

tions in each mode.

If a station is already saved to the selected preset number, the station will be replaced by the station you are listening to. 4-13 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 14 Multimedia System MEDIA PLAYER Using the media player You can play music stored in various media storage devices, such as USB storage devices, smartphones. 1. Connect a device to the USB/AUX port in your vehicle.

Playback may start immediately depending on the device that you connect to the system. 2. On the control panel, press the

[AUDIO] button. 3. When the mode selection window displays, turn the [TUNE] knob to select the desired mode and then press the knob. NOTICE

To start the media player, press the [AUDIO] button on the con-

trol panel.

You can also change the mode by press the [MODE] button repeat-

edly on the steering wheel. 4-14

Make sure to connect or discon-

nect external USB devices with the system power turned off.

When the Mode popup is not selected in [MENU/CLOCK] Mode Popup, press the [AUDIO]

button on the control panel to change the media player. Each time you press the [AUDIO]

button on the control panel, the media mode switches to USB Bluetooth audio* AUX in order.

Depending on vehicle models and specifications, available buttons or the appearance and layout of the USB/AUX port in your vehicle may vary.

Do not connect a smartphone or an MP3 device to the system via multiple methods such as USB, Bluetooth* and AUX simultane-

ously. Doing so may cause a dis-

torted noise or a system mal-

function.

When the equaliser function of the connected device and Tone settings of the system are both activated, the effects may inter-

fere with each other and may lead to sound degradation or distortion. the devices equaliser function if possible. Deactivate

Noise may occur when an AUX device is connected. When such devices are not being used, dis-

connect the device for storage.

When the AUX device power is connected to the power jack, playing the external device may result in noise. In such cases, disconnect the power connec-

tion before use.

*if equipped H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 15 Using the USB mode You can play media files stored in portable devices, such as USB stor-

age devices and MP3 players. Check compatible USB storage devices and file specifications before using the USB mode. Connect your USB device to the USB port in the vehicle.

Playback starts immediately.

Press the [AUDIO] button on the control panel to display the mode selection window, turn the [TUNE]

knob to select USB and then press the knob.

(1) Current file number and total number of files

(2) Playback time

(3) Information about the song cur-

rently playing Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

List: Access the file list.

Folder List: Access the folder list.

Information: Display information about the song currently playing.

Sound Settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

- Position: Select a location where sound will be concentrat-

ed in the vehicle. Select Fader or Balance, turn the [TUNE] knob to select the desired position, and then press the knob. To set sound to be centred in the vehi-

cle, select Center.

- Tone: Adjust the output level for each sound tone mode.

- Speed Dependent Vol.: Set the volume to be adjusted automati-

cally according to your driving speed. (if equipped) NOTICE

Depending on vehicle models or specifications, available options may vary.

Depending on the system or amplifier specifications applied to your vehicle, available options may vary.

Media Display: Select information such or Artist/Title/Album to display when playing MP3 files. Folder/File as

Mode Popup: Set to display mode selection window when the

[AUDIO] button is pressed on the control panel. 4-15 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 16 Multimedia System

Date/Time: You can change the date and time that are shown on the system display.

- Set Date: Set date to display on the system display.

- Set Time: Set time to display on the system display.

- Time Format: Select to display time in the 12 hour format or the 24 hour format.

- Display (Power Off): Set to dis-

play the clock when the system power is off.

Language: You can change the display language. Rewinding/Fast forwarding On the control panel, press and hold the [ SEEK] button / [TRACK ]

button.

You can also push and hold the Up/Down lever on the steering wheel. Restarting the current playback On the control panel, press the

[TRACK ] button.

You can also push the Down lever on the steering wheel. Playing the previous or next song To play the previous song, press the

[TRACK ] button twice on the con-

trol panel. To play the next song, press the [ SEEK] button on the control panel.

You can also use the Up/Down lever on the steering wheel. NOTICE Press the [MENU/CLOCK] button on the control panel to display the mode selection window, turn the

[TUNE] knob to find the desired song and press the knob to play the file. 4-16 Playing repeatedly On the control panel, press the

[1 RPT] button. The repeat play mode changes each time you press it. The corresponding mode icon will be displayed on the screen. Playing in random order On the control panel, press the

[2 SHFL] button. The shuffle play mode is activated or deactivated each time you press it. When you activate the shuffle mode, the corre-

sponding mode icon will be displayed on the screen. Searching folders 1. On the control panel, press the

[MENU/CLOCK] button. 2. When the option selection window displays, turn the [TUNE] knob to select the Folder List and then press the knob. 3. Navigate to the desired folder in the Folder List and then press the

[TUNE] knob.

The first song in the selected folder will be played. H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 17 i Information Start the engine of your vehicle before connecting a USB device to your system. Starting the engine with a USB device connected to the system may damage the USB device. Be careful of static electricity when connecting or disconnecting a USB device. A static discharge may cause a system malfunction. Be careful not to let your body or external objects contact the USB port. Doing so may cause an acci-

dent or a system malfunction. Do not connect and disconnect a USB connector repeatedly in a short time. Doing so may cause an error in the device or a system malfunction. Do not use a USB device for purpos-

es other than playing files. Using USB accessories for charging or heating may cause poor perform-

ance or a system malfunction. NOTICE

When connecting a USB storage device, do not use an extension cable. Connect it directly to the USB port. If you use a USB hub or an extension cable, the device may not be recognized.

Fully insert a USB connector into the USB port. Failure to do so may cause a communication error.

When you disconnect a USB storage device, a distorted noise may occur.

The system can play only files encoded in a standard format.

The following types of USB devices may not be recognised or work correctly:

- Encrypted MP3 players

- USB devices not recognised as removable disks

A USB device may not be recog-

nised depending on its condition.

Some USB devices may be incompatible with your system.

Depending on the USB devices type, capacity, or the format of files, USB recognition time may be longer.

Image and video playback are not supported. Using the AUX mode You can listen to audio from your vehicles speakers by connecting external devices, such as smart-

phones and MP3 players. Connect an external device to the AUX port in your vehicle using an AUX cable.

The AUX mode starts automatical-

ly and the sound is heard via your vehicles speakers.

If an external device is already connected to the system, press the

[AUDIO] button repeatedly until the AUX mode is selected. 4-17 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 18 Multimedia System Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

Sound Settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

- Position: Select a location where sound will be concentrat-

ed in the vehicle. Select Fader or Balance, turn the [TUNE] knob to select the desired position, and then press the knob. To set sound to be centred in the vehi-

cle, select Center.

- Tone: Adjust the output level for each sound tone mode.

- Speed Dependent Vol.: Set the volume to be adjusted automati-

cally according to your driving speed. (if equipped) 4-18 NOTICE

Because the system works as an output device of the connected external device in the AUX mode, you cannot use controls other than the volume control. Use controls on the external device to control playback.

The sound volume for the AUX mode is adjusted separately from the other modes.

Depending on the device type, using an external device with the power cable plugged into the power jack may cause a distort-

ed noise.

If the AUX cable is plugged into the system without an external device, a distorted noise may occur. Remove the AUX cable from the AUX port when an exter-

nal device is not connected. NOTICE

Depending on vehicle models or specifications, available options may vary.

Depending on the system or amplifier specifications applied to your vehicle, available options may vary.

Mode Popup: Set to display mode selection window when the

[MEDIA] button is pressed on the control panel.

Date/Time: You can change the date and time that are shown on the system display.

- Set Date: Set date to display on the system display.

- Set Time: Set time to display on the system display.

- Time Format: Select to display time in the 12 hour format or the 24 hour format.

- Display (Power Off): Set to dis-

play the clock when the system power is off.

Language: You can change the display language. H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 19 technology. BLUETOOTH (IF EQUIPPED) Connecting Bluetooth devices Bluetooth is a short-range wireless networking Via Bluetooth, you can connect nearby mobile devices wirelessly to send and receive data between connected devices. This enables you to use your devices effectively. To use Bluetooth, you must first con-

nect a Bluetooth-enabled device to your system, such as a mobile phone or an MP3 player. Ensure that the device you want to connect supports Bluetooth. WARNING Park your vehicle in a safe loca-

tion before connecting Bluetooth devices. Distracted driving can cause a traffic accident and lead to personal injury or death. NOTICE

On your system, you can use only Bluetooth Handsfree and Audio features. Connect a mobile device that supports both features.

Some Bluetooth devices may cause malfunctions to the audio system or make interference noises. In this case, storing the device in a different location may resolve the problem.

Depending on the connected Bluetooth device or mobile phone, some functions may not be supported.

If the system is not stable due to a vehicle-Bluetooth device com-

munication error, delete the paired devices and connect the Bluetooth devices again.

If Bluetooth connection is not stable, follow these steps to try again. 1. Deactivate Bluetooth and reactivate it on the device. Then, reconnect the device. 2. Turn the device off and on. Then, reconnect it. 3. Remove the battery from the device and reinstall it. Then, turn the device on and recon-

nect it. 4. Unregister the Bluetooth pair-

ing on both the system and the device and then re-regis-

ter and connect them.

The Bluetooth connection is unavailable when the devices Bluetooth function is turned off. Be sure to turn on the devices Bluetooth function. 4-19 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 20 Multimedia System Pairing devices with your system For Bluetooth connections, first pair your device with your system to add it to the systems list of Bluetooth devices. You can register up to five devices. 1. From the control panel, press the

[PHONE] button, and then select Phone settings Add New Device.

If you are pairing a device with your system for the first time or there is no connected devices, you can also press the Call/Answer button on the steer-

ing wheel. 2. On the Bluetooth device you want to connect, activate Bluetooth, search for your vehicles system, and then select it.

Check the systems Bluetooth name, which is displayed in the new registration pop-up window on the system screen. 4-20

The default passkey is 0000.

It may take a while for the sys-

tem to connect with the device after you permit the system to access the device. When a con-

nection is made, the Bluetooth status icon appears at the top of the screen.

You can change the permission settings via the mobile phones Bluetooth settings menu. For more information, refer to your mobile phones user guide.

To register a new device, repeat steps 1 to 3.

If you use the automatic Bluetooth connection function, a call may be switched to the vehicles Handsfree when you are taking on the phone near the vehicle while the vehicles engine is on. If you do not want the system to connect with the device automatically, deactivate Bluetooth on your device.

When a device is connected to the system via Bluetooth, the devices battery may discharge faster. 3. Enter or confirm the passkey to confirm the connection.

If the passkey input screen is the Bluetooth displayed on the device passkey 0000 which is dis-

played on the system screen. screen, enter ensure

If the 6-digit passkey is dis-

played on the Bluetooth device screen, the Bluetooth passkey displayed on the Bluetooth device is the same as the passkey on the system screen and confirm the connec-

tion from the device. that NOTICE

The screen image in this manual is an example. Check your system screen for the exact vehicle name and Bluetooth device name. H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 21 Connecting a paired device To use a Bluetooth device on your system, connect the paired device to the system. Your system can connect with only one device at a time. 1. From the control panel, press the

[PHONE] button, and then select Phone settings Paired Devices.

If there is no connected device, press the Call/Answer button on the steering wheel. 2. Turn the [TUNE] knob to select the device to connect, and then press the knob.

If another device is already con-

nected to your system, discon-

nect it. Select the connected device to disconnect. NOTICE

If a connection ends because a device is out of the connection range or a device error occurs, the connection will be restored automatically when the device enters the connection range or when the error is cleared.

Depending on auto connection priority, connection to a device may take time. Disconnecting a device If you want to stop using a Bluetooth device or connect another device, disconnect your currently connected device. 1. From the control panel, press the

[PHONE] button, and then select Phone settings Paired Devices. 2. Turn the [TUNE] knob to select your currently connected device and then press the knob. 3. Press the [1 RPT] button to select Yes. 4-21 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 22 Multimedia System Deleting paired devices If you no longer want a Bluetooth device paired or if you want to con-

nect a new device when the Bluetooth device list is full, delete paired devices. 1. From the control panel, press the

[PHONE] button, and then select Phone settings Delete Devices. 2. Turn the [TUNE] knob to select the device to delete, and then press the knob. 3. Press the [1 RPT] button to select Yes. NOTICE

When you delete a paired device, the Call history and Contacts stored in the system are also deleted.

To re-use a deleted device, you must pair the device again. 4-22 Using a Bluetooth audio device You can listen to music stored in the connected Bluetooth audio device via your vehicles speakers. 1. On the control panel, press the

[AUDIO] button. 2. When the mode selection window displays, turn the [TUNE] knob to select BT Audio and then press the knob.

(1) Information about the song cur-

rently playing Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

Sound Settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

- Position: Select a location where sound will be concentrat-

ed in the vehicle. Select Fader or Balance, turn the [TUNE]

knob to select the desired posi-

tion, and then press the knob. To set sound to be centred in the vehicle, select Center.

- Tone: Adjust the output level for each sound tone mode.

- Speed Dependent Vol.: Set the volume to be adjusted automatically according to your driving speed. NOTICE

Depending on vehicle models or specifications, available options may vary.

Depending on the system or amplifier specifications applied to your vehicle, available options may vary. H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 23

Mode Popup: Set to display mode selection window when the [AUDIO] button is pressed on the control panel.

Date/Time: You can change the date and time that are shown on the system display.

- Set Date: Set date to display on the system display.

- Set Time: Set time to display on the system display.

- Time Format: Select to dis-

play time in the 12 hour format or the 24 hour format.

- Display (Power Off): Set to display the clock when the system power is off.

Language: You can change the display language. Pausing/Resuming playback To pause playback, press the [TUNE]

knob on the control panel. To resume playback, press the [TUNE] knob again.

You can also press the Mute button on the steering wheel remote con-

trol. Restarting the current playback On the control panel, press the

[TRACK ] button.

You can also push the Down lever on the steering wheel. Playing the previous or next song To play the previous song, press the

[TRACK ] button twice on the con-

trol panel. To play the next song, press the [ SEEK] button on the control panel.

You can also use the Up/Down lever on the steering wheel. NOTICE Depending on the connected Bluetooth device or mobile phone, playing the previous/next song may not be supported. Playing repeatedly On the control panel, press the

[1 RPT] button. The repeat play mode changes each time you press it. The corresponding mode icon will be displayed on the screen. Playing in random order On the control panel, press the

[2 SHFL] button. The shuffle play mode is activated or deactivated each time you press it. When you activate the shuffle mode, the corre-

sponding mode icon will be displayed on the screen. 4-23 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 24 Multimedia System NOTICE

Depending on the connected Bluetooth device, mobile phone, or the music player you are using, playback controls may differ.

Depending on the music player you are using, streaming may not be supported.

Depending on the connected Bluetooth device or mobile phone, some functions may not be supported.

If a Bluetooth enabled phone is being used to play music and it receives or makes a phone call, the music will stop.

Receiving an incoming call or making an outgoing call while playing Bluetooth audio may result in audio interference.

If you use the Bluetooth phone mode while using Bluetooth audio, playback may not auto-

matically resume after you end the call depending on the con-

nected mobile phone. 4-24

Moving the track up/down while playing Bluetooth audio mode may result in pop noises with some mobile phones.

The Rewinding/Fast forwarding function is not supported in the Bluetooth audio mode.

The playlist feature is not sup-

ported in the Bluetooth audio mode.

If the Bluetooth device is dis-

connected, Bluetooth audio mode will end. Using a Bluetooth phone You can use Bluetooth to talk on the phone hands free. View call informa-

tion on the system screen, and make or receive calls safely and conve-

niently via the vehicles built-in micro-

phone and speakers. WARNING

Park your vehicle in a safe location before connecting Bluetooth devices. Distracted driving can cause a traffic accident and lead to personal injury or death.

Never dial a phone number or pick up your mobile phone while driving. Use of a mobile phone may distract your attention, making it difficult to recognize external conditions and reducing the ability to cope with unexpected situa-

tions, which may lead to an accident. If necessary, use the Bluetooth Handsfree feature to make calls and keep the call as short as possible. H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 25 NOTICE

You cannot access the Phone screen if there is no connected mobile phone. To use the Bluetooth phone function, con-

nect a mobile phone to the sys-

tem.

The Bluetooth Handsfree func-

tion may not work when you are passing out of the cellular service coverage area, such as when you are in a tunnel, underground, or in a mountainous area.

Call quality may be degraded in the following environments:

- The reception of the mobile phone is poor

- The inside of the vehicle is noisy

- The mobile phone is placed near metallic objects, such as a beverage can.

Depending on the connected mobile phone, the volume and sound quality of the Bluetooth Handsfree may vary. Making a call If your mobile phone is connected to the system, you can make a call by selecting a name from your call his-

tory or contacts list. 1. On the control panel, press the

[PHONE] button.

Alternatively, press the Call/

Answer button on the steering wheel. 2. Select a phone number.

To select a phone number from select favorites list, your Favorites.

To select a phone number from your call history, select Call History.

To select a phone number from your contacts list that down-

loaded the connected mobile phone, select Contacts. 3. To end the call, press the [2 SHFL]

from button on the control panel.

Alternatively, press the Call end button on the steering wheel. Registering the favourites list You can more easily use Bluetooth to talk on the phone hands-free by reg-

istering phone numbers as your favourites. 1. On the Phone screen, turn the

[TUNE] knob on the control panel to select Favourites and press the knob. 2. Select [MENU/CLOCK] Add new favourites. 3. Press the [1 RPT] button, and select the desired phone number. 4-25 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 26 Multimedia System Using the favorites list 1. From the Phone screen, turn the

[TUNE] knob on the control panel to select Favorites, and then press the knob. 2. Turn the [TUNE] knob to select the desired contact, and then press the knob to make a phone call. Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

Add New Favorites: Add a fre-

quently used phone number to favorites.

Delete Items: Delete a selected favorites item.

Delete All: Delete all favorites items. 4-26 NOTICE

You can register up to 20 favorites for each device.

You must first download the contacts to the system to regis-

ter favorites.

The favorites list saved on the mobile phone is not downloaded to the system.

Even if the contact information on the mobile phone is edited, the favorites on the system are not automatically edited. Delete and add the item to favorites again.

When you connect a new mobile phone, your favorites set for the previous mobile phone will not be displayed, but they will remain in your system until you delete the previous phone from the device list. Using your call history 1. From the Phone screen, turn the

[TUNE] knob on the control panel to select Call History, and then press the knob. 2. Turn the [TUNE] knob to select the desired entry, and then press the knob to make a phone call. Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

Download: Download your call history.

All Calls: View all call records.

Dialed Calls: View only dialed calls.

Received Calls: View only received calls.

Missed Calls: View only missed calls. H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 27 NOTICE

Some mobile phones may not support the download function.

The call history is accessed only after downloading the call histo-

ry when the mobile phone is connected to the system.

Calls from restricted IDs are not saved on the call history list.

Up to 50 call records will be downloaded per individual list.

Call duration and time informa-

tion will not be displayed on the system screen.

Permission is required to down-

load your call history from the mobile phone. When you attempt to download data, you may need to permit the down-

load on the mobile phone. If the download fails, check the mobile phone screen for any notifica-

tion or the mobile phones per-

mission setting.

When you download your call history, any old data will be deleted. Using the contacts list 1. From the Phone screen, turn the

[TUNE] knob on the control panel to select Contacts, and then press the knob. 2. Turn the [TUNE] knob to select the desired group of alphanumeric characters, and then press the knob. 3. Turn the [TUNE] knob to select the desired contact, and then press the knob to make a phone call. Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing a menu option:

Download: Download your mobile phone contacts. NOTICE

Contacts can be viewed only when the Bluetooth device is connected.

Only contacts in the supported format can be downloaded and displayed from the Bluetooth device. Contacts from some applications will not be included.

Up to 2,000 contacts can be downloaded from your device.

Some mobile phones may not support the download function.

Depending on the systems spec-

ifications, some of the down-

loaded contacts may be lost.

Contacts stored both in the phone and in the SIM card are downloaded. With some mobile phones, contacts in the SIM card may not be downloaded.

Special characters and figures used in the contact name may not be displayed properly. 4-27 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 28 NOTICE

Depending on the mobile phone type, call rejection may not be supported.

Once your mobile phone is con-

nected to the system, the call sound may be output through the vehicles speakers even after you exit the vehicle if the phone is within the connection range. To end the connection, discon-

nect the device from the system or deactivate Bluetooth on the device. Answering calls When a call comes in, a notification pop-up window of the incoming call appears on the system screen. To answer the call, press the [1 RPT]

button on the control panel.

Alternatively, press the Call/

Answer button on the steering wheel. To reject the call, press the [2 SHFL]

button on the control panel.

Alternatively, press the Call end button on the steering wheel. Multimedia System

Permission is required to down-

load contacts from the mobile phone. When you attempt to download data, you may need to permit the download on the mobile phone. If the download fails, check the mobile phone screen for any notification or the mobile phones permission set-

ting.

Depending on the mobile phone type or status, downloading may take longer.

When you download your con-

tacts, any old data will be deleted.

You cannot edit or delete your contacts on the system.

When you connect a new mobile phone, your contacts down-

loaded from the previous mobile phone will not be displayed, but they will remain in your system until you delete the previous phone from the device list. 4-28 H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 29 Using options during a call During a call, you will see the call screen shown below. Press a button to perform the function you want. Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing a menu option:

Outgoing Volume: Adjust the microphone volume or turn off the microphone so the other party can-

not hear you. To switch the call to your mobile phone, press the [1 RPT] button on the control panel.

Alternatively, press and hold the Call/Answer button on the steering wheel. To end the call, press the [2 SHFL]

button on the control panel.

Alternatively, press the Call end button on the steering wheel. NOTICE

If the caller information is saved in your contacts list, the callers name and phone number will be displayed. If the caller informa-

tion is not saved in your con-

tacts list, only the callers phone number will be displayed.

You cannot switch to any other screen, such as the audio screen or the settings screen, during a Bluetooth call.

Depending on the mobile phone type, call quality may vary. On some phones, your voice may be less audible to the other party.

Depending on the mobile phone type, the phone number may not be displayed.

Depending on the mobile phone type, the call switching function may not be supported. 4-29 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 30 Multimedia System SYSTEM STATUS ICONS Status icons appear at the top of the screen to display the current system status. Familiarise yourself with the status icons that appear when you perform certain actions or functions and their meanings. 4-30 NOTICE

The battery level displayed on the screen may differ from the battery level displayed on the connected device.

The signal strength displayed on the screen may differ from the signal strength displayed on the connected mobile phone.

Depending on vehicle models and specifications, some status icons may not be displayed. Bluetooth Icon Description Battery level Bluetooth device of connected Mobile phone or audio device con-

nected via Bluetooth Bluetooth call in progress Microphone Bluetooth call turned off during Downloading call history from a mobile phone connected via Bluetooth to the system Downloading contacts from a mobile phone connected via Bluetooth to the system Signal strength Icon Description Signal strength of the mobile phone connected via Bluetooth H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 31 AUDIO SYSTEM SPECIFICATIONS USB Supported audio formats

Audio file specification

- WAVeform audio format

- MPEG1/2/2.5 Audio Layer3

- Windows Media Audio Ver 7.X/8.X

Bit rates

- MPEG1 (Layer3):

32/40/48/56/64/80/96/112/128/

160/192/224/256/320 kbps

- MPEG2 (Layer3):

8/16/24/32/40/48/56/64/80/96/

112/128/144/160 kbps

- MPEG2.5 (Layer3):

8/16/24/32/40/48/56/64/80/96/

112/128/144/160 kbps

- WMA (High Range):

48/64/80/96/128/160/192 kbps

Bits Per Sample

- WAV (PCM(Stereo)): 24 bit

- WAV (IMA ADPCM): 4 bit

- WAV (MS ADPCM): 4 bit

Sampling frequency

- MPEG1: 44100/48000/32000 Hz

- MPEG2: 22050/24000/16000 Hz

- MPEG2.5: 11025/12000/8000 Hz

- WMA: 32000/44100/48000 Hz

- WAV: 44100/48000 Hz length of folder/file names (Based on Unicode): 40 English or Korean characters

Maximum

Supported characters for folder/file names (Unicode support): 2,604 Korean characters, 94 alphanu-

meric characters, 4,888 Chinese characters in common use, 986 special characters

Maximum number of folders: 1,000

Maximum number of files: 5,000 NOTICE

Files that are not in a supported format may not be recognised or played, or information about them, such as the file name, may not be displayed properly.

Only files with .mp3/.wma/.wav extensions can be recognised by the system. If the file is not in supported format, change the file format by using the latest encoding software.

The device will not support files locked by DRM (Digital Rights Management).

For MP3/WMA compression files and WAV file, differences in sound quality will occur depend-

ing on the bitrate. (Music files with a higher bitrate have a bet-

ter sound quality.)

Japanese or Simplified Chinese characters in folder or file names may not be displayed properly. 4-31 4 M u l t i i m e d a S y s t e m H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 32 Multimedia System Supported USB storage devices

Byte/Sector: 64 kbyte or less

Format system: FAT12/16/32 (rec-

ommended), exFAT/NTFS 4-32 Bluetooth

Aerial power: Max 3 mW NOTICE

Operation is guaranteed only for a metal cover type USB storage device with a plug type connector.

- USB storage devices with a plastic plug may not be recog-

nised.

- USB storage devices in memo-

ry card types, such as CF card or SD cards, may not be recog-

nised.

USB hard disk drives may not be recognised.

When you use a large capacity USB storage device with multi-

ple logical drives, only files stored on the first drive will be recognised.

If an application program is loaded on a USB storage device, the corresponding media files may not play.

Use USB 2.0 devices for better compatibility. H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 33 TRADEMARKS Other trademarks and trade names are those of their respective owners.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HYUNDAI is under licence. 4 M u l t i i m e d a S y s t e m 4-33 H_NVVJ000_AD 19PE_G4.0V[PB]AUD_F2MSBJ4E00:YF eng 4c-Audio.qxd 10/15/2018 11:29 AM Page 34 Multimedia System DECLARATION OF CONFORMITY ANATEL for Brazil 4-34

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. IC Warning

"This device complies with Industry Canada licence-exempt RSS standard(s)."

Operation is subject to the following conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas provoquer de brouillage, et

(2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.