all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 906.38 KiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 906.38 KiB |
DIGITAL CAR AUDIO SYSTEM User Manual AAM1A0SLAN AM1A0SLKN AM170SLAN AM110SLGG AM110SLGE AM110SLGN AM1A0SLKN Hyundai MOBIS Co., Ltd. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC Warning
"This device complies with Industry Canada licence-exempt RSS standard(s)."
Operation is subject to the following conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas provoquer de brouillage, et (2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Features of your vehicle How vehicle audio works FM reception This can be due to factors, such as the distance from the radio station, closeness of other strong radio sta-
tions or the presence of buildings, bridges or other large obstructions in the area. AM reception JBM001 AM and FM radio signals are broad-
cast from transmitter towers located around your city. They are intercept-
ed by the radio antenna on your vehi-
cle. This signal is then processed by the radio and sent to your vehicle speakers. When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best possible quality reproduction. However, in some cases the signal coming to your vehi-
cle may not be strong and clear. JBM002 AM broadcasts can be received at greater distances than FM broad-
casts. This is because AM radio waves are transmitted at low fre-
quencies. These long distance,low frequency radio waves can follow the curvature of the earth rather than travelling straight. In addition, they curve around obstructions resulting in better signal coverage. 4 1 Features of your vehicle FM radio station JBM003 FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade within short distances from the station. short distances from the station. Also, FM signals are eas-
ily affected by buildings, mountains, and obstructions. This can lead to undesirable or unpleasant listening conditions which might lead you to believe a problem exists with your radio. The following conditions are normal and do not indicate radio trouble:
JBM004 Fading - As your vehicle moves away from the radio station, the signal will weaken and sound will begin to fade. When this occurs, we suggest that you select another stronger station. Flutter/Static - Weak FM signals or large obstructions between the transmitter and your radio can dis-
turb the signal causing static or fluttering noises to occur. Reducing the treble level may lessen this effect until the disturbance clears. JBM005 Station Swapping - As an FM sig-
nal weakens, another more power-
ful signal near the same frequency may begin to play. This is because your radio is designed to lock onto the clearest signal. If this occurs, select another station with a stronger signal. Multi-Path Cancellation - Radio signals being received from sever-
al directions can cause distortion or fluttering. This can be caused by a direct and reflected signal from the same station, or by signals from two stations with close fre-
quencies. If this occurs, select another station until the condition has passed. 24 WARNING Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone. Using a cellular phone or a two-way radio When a cellular phone is used inside the vehicle, noise may be produced from the audio system. This does not mean that something is wrong with the audio equipment. In such a case, try to operate mobile devices as far from the audio equipment as possi-
ble. CAUTION When using a communication system such as a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted.When a cellular phone or a radio set is used with an internal antenna alone, it may interfere with the vehi-
cle's electrical system and adversely affect safe operation of the vehicle. Features of your vehicle Caring for disc If the temperature inside the car is too high, open the car windows to venti-
late before using the system. It is illegal to copy and use MP3/WMA files without permission. Use CDs that are created only by lawful means. Do not apply volatile agents, such as benzene and thinner, normal cleaners and magnetic sprays made for analogue disc onto CDs. To prevent the disc surface from getting damaged, hold CDs by the edges or the center hole only. Clean the disc surface with a piece of soft cloth before playback (wipe it from the center to the outside edge). Do not damage the disc surface or attach pieces of sticky tape or paper. Make certain only CDs are insert-
ed into the CD player (Do not insert more than one CD at a time). Keep CDs in their cases after use to protect them from scratches or dirt. 4 3 Features of your vehicle Depending on the type of CD-
R/CD-RW CDs, certain CDs may not operate normally according to the manufacturing companies. In such circumstances, continued use may cause malfunctions to your audio system. NOTE:
Order of playing files (folders) :
1. Song playing order :
to sequentially. 2. Folder playing order :
If no song file is contained in the folder, that folder is not displayed. NOTICE
- Playing an Incompatible Copy Protected Audio CD Some copy protected CDs, which do not comply with international audio CD standards (Red Book), may not play on your car audio. Please note that inabilities to properly play a copy protected CD may indicate that the CD is defective, not the CD player. 44 Features of your vehicle WARNING Do not stare at the screen while driving. Staring at the screen for prolonged periods of time could lead to traffic accidents. Do not disassemble, assem-
ble, or modify the audio sys-
tem.Such acts could result in accidents, fire, or electric shock. Using the phone while driving may lead to a lack of attention of traffic conditions and increase the likelihood of accidents. Use the phone feature after parking the vehicle. Heed caution not to spill water or introduce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction.
(Continued)
(Continued) Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product mal-
function. Continued use in such conditions could lead to accidents(fires, electric shock) or product malfunc-
tions. Do not touch the antenna dur-
ing thunder or lightening as such acts may lead to light-
ning induced electric shock. Do not stop or park in park-
ing-restricted areas to operate the product. Such acts could lead to traffic accidents. Use the system with the vehi-
cle ignition turned on. Prolonged use with the igni-
tion turned off could result in battery discharge. CAUTION Operating the device while driving could lead to acci-
dents due to a lack of atten-
tion to external surroundings. First park the vehicle before operating the device. Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to acci-
dents. Pay attention to the volume setting when turning the device on.A sudden output of extreme volume upon turning the device on could lead to hearing impairment. (Adjust the volume to a suitable levels before turning off the device.)
(Continued) 4 5 Features of your vehicle
(Continued) If you want to change the posi-
tion of device installation, please inquire with your place of purchase or service mainte-
nance center. Technical expertise is required to install or disassemble the device. Turn on the car ignition before using this device.Do not oper-
ate the audio system for long periods of time with the igni-
tion turned off as such opera-
tions may lead to battery dis-
charge. Do not subject the device to severe shock or impact.Direct pressure onto the front side of the monitor may cause dam-
age to the LCD or touch screen.
(Continued) 64
(Continued) When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materials, chemical cloths, or solvents (alcohol, benzene, thinners, etc.) as such materials may damage the device panel or cause color/quality deterioration Do not place beverages close to the audio system. Spilling beverages may lead to system malfunction. In case of product malfunction, please contact your place of pur-
chase or After Service center. Placing the audio system within an electromagnetic environment may result in noise interference. Prevent caustic solutions such as perfume and cosmet-
ic oil from contacting the dashboard because they may cause damage or discol-
oration. USING THE USB DEVICE To use an external USB device, make sure the device is not con-
nected when starting up the vehicle. Connect the device after starting up. If you start the engine when the USB device is connected, it may damage the USB device. (USB flashdrives are very sensitive to electric shock.) If the engine is started up or turned off while the external USB device is connected, the external USB device may not work. The System may not play unau-
thenticated MP3 or WMA files. 1) It can only play MP3 files with rate the between 8Kbps ~ 320Kbps. compression 2) It can only play WMA music files with the compression rate between 8Kbps ~
320Kbps. Take precautions for static elec-
tricity when connecting or discon-
necting the external USB device.
(Continued)
(Continued) An encrypted MP3 PLAYER is not recognizable. Depending on the condition of the external USB device, the connected external USB device can be unrecognizable. When the formatted byte/sector setting of External USB device is not or 2048BYTE, then the device will not be recognized. 512BYTE either Use only a USB device format-
ted to FAT 12/16/32. USB devices without USB I/F authentication may not be recog-
nizable. Make sure the USB connection terminal does not come in con-
tact with the human body or other objects. If you repeatedly connect or dis-
connect the USB device in a short period of time, it may break the device.
(Continued) Features of your vehicle
(Continued) You may hear a strange noise when connecting or disconnect-
ing a USB device. If you disconnect the external USB device during playback in USB mode, the external USB device can be damaged or may malfunction. Therefore, discon-
nect the external USB device when the audio is turned off or in another mode. (e.g, Radio, CD) Depending on the type and capacity of the external USB device or the type of the files stored in the device, there is a difference in the time taken for recognition of the device. Do not use the USB device for purposes other than playing music files. Playing videos through the USB is not supported. Use of USB accessories such as rechargers or heaters using USB I/F may lower performance or cause trouble.
(Continued) 4 7 Features of your vehicle
(Continued) If you use devices such as a USB hub purchased separately, the vehicles audio system may not recognize the USB device. In that case, connect the USB device directly to the multimedia terminal of the vehicle. If the USB device is divided by log-
ical drives, only the music files on the highest-priority drive are rec-
ognized by car audio. Devices such as MP3 Player/
Cellular phone/Digital camera can be unrecognizable by standard USB I/F can be unrecognizable. Charging through the USB may not be supported in some mobile devices. USB HDD or USB types liable to connection failures due to vehicle vibrations are not supported.
(i-stick type) Some non-standard USB devices
(METAL COVER TYPE USB) can be unrecognizable.
(Continued) 84
(Continued) Some USB flash memory read-
ers (such as CF, SD, micro SD, etc.) or external-HDD type devices can be unrecognizable. Music files protected by DRM
(DIGITAL RIGHTS MANAGE-
MENT) are not recognizable. The data in the USB memory may be lost while using this audio. Always back up important data on a personal storage device. Please avoid using USB memory prod-
ucts which can be used as key chains or cellular phone acces-
sories as they could cause dam-
age to the USB jack. Please make certain only to use plug type connector products. USING THE iPod DEVICE Some iPod models may not support communication protocol and files may not properly play. Supported iPod models:
- iPhone 3GS/4
- iPod touch 1st~4th generation
- iPod nano 1st~6th generation
- iPod classic The order of search or playback of songs in the iPod can be dif-
ferent from the order searched in the audio system. If the iPod is disabled due to its own malfunction, the iPod. (Reset: Refer to iPod manual) reset An iPod may not operate nor-
mally on low battery.
(Continued)
(Continued) Some iPod devices, such as the iPhone, can be connected through the Bluetooth Wireless Technology interface. The device must have audio Bluetooth Wireless Technology capability
(such as for stereo headphone Bluetooth Wireless Technology
). The device can play, but it will not be controlled by the audio system. To use iPod features within the audio, use the cable provided upon purchasing an iPod device. Skipping or improper operation may occur depending on the characteristics your iPod/iPhone device. of If your iPhone is connected to both the Bluetooth Wireless Technology and USB, the sound may not be properly played. In your iPhone, select the Dock or Bluetooth connector Wireless Technology to change the sound output (source).
(Continued) Features of your vehicle
(Continued) When connecting iPod with the iPod Power Cable, insert the connector to the multimedia socket completely. If not inserted completely, communications between iPod and audio may be interrupted. When adjusting the sound effects of the iPod and the audio system, the sound effects of both devices will overlap and might reduce or distort the qual-
ity of the sound. Deactivate (turn off) the equaliz-
er function of an iPod when adjusting the audio systems vol-
ume, and turn off the equalizer of the audio system when using the equalizer of an iPod. When not using iPod with car audio, detach the iPod cable from iPod. Otherwise, iPod may remain in accessory mode, and may not work properly. 4 9 Features of your vehicle Bluetooth Wireless Technology Before Using the Bluetooth Handsfree Precautions for Safe Driving BluetoothWireless Technology The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, lnc. and any use of such marks by Kia is under license. A Bluetooth enabled call phone is required to use Bluetooth wireless technology. WARNING Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe personal injury, and death. The drivers primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle sys-
tems which take the drivers eyes, attention and focus away from the safe operation of a vehi-
cle or which are not permissible by law should never be used dur-
ing operation of the vehicle. 4 10 What is Bluetooth?
Bluetooth refers to a short-dis-
tance wireless networking technol-
ogy which uses a 2.4GHz ~
2.48GHz frequency to connect var-
ious devices within a certain dis-
tance. Supported within PCs, external devices, Bluetooth phones, PDAs, various electronic devices, and automotive environments, Bluetooth allows data to be trans-
mitted at high speeds without hav-
ing to use a connector cable. Bluetooth Handsfree refers to a device which allows the user to con-
veniently make phone calls with Bluetooth mobile phones through the audio system. Bluetooth Handsfree may not be supported in some mobile phones. To learn more about mobile device compatibility, visit www.kia.com. Bluetooth Handsfree is a feature that enables drivers to practice safe driving. Connecting the head unit with a Bluetooth phone allows the user to conveniently make and receive calls and use contacts. Before using Bluetooth, carefully read the contents of this users manual. Excessive use or operations while driving may lead to negligent driv-
ing practices and result in acci-
dents. Refrain from excessive oper-
ations while driving. Viewing the screen for prolonged periods of time is dangerous and may lead to accidents. When driv-
ing, view the screen only for short periods of time. When connecting a Bluetooth Phone Before connecting the head unit with the mobile phone, check to see that the mobile phone sup-
ports Bluetooth features. Even if the phone supports Bluetooth, the phone will not be found during device searches if the phone has been set to hidden state or the Bluetooth power is turned off. Disable the hidden state or turn on the Bluetooth power prior to searching/connect-
ing with the Head unit. Bluetooth phone is automatically connected when the ignition on. If you do not want automatic con-
nection with your Bluetooth device, turn off the Bluetooth feature within your mobile phone. The Handsfree call volume and quality may differ depending on the mobile phone. Park the vehicle when connecting the head unit with the mobile phone. Bluetooth connection may become intermittently discon-
nected in some mobile phones. Follow these steps to try again. 1. Within the mobile phone, turn the Bluetooth function off/on and try again. 2. Turn the mobile phone power Off/On and try again. 3. Completely remove the mobile phone battery, reboot, and then again. 4. Reboot the audio system and try again. 5. Delete all paired devices, pair and try again. Handsfree call quality and volume may differ depending on the model of your mobile phone. Features of your vehicle 4 11 Features of your vehicle Voice Recognition When using the voice recognition feature, only commands listed within the user's manual are sup-
ported. Be aware that during the operation of the voice recognition system, pressing any key other than the key terminate voice recogni-
tion mode. For superior voice recognition per-
formance, position the microphone used for voice recognition above the head of the drivers seat and maintain a proper position when saying commands. Within the following situations, voice recognition may not function properly due to external sound.
- When the windows and sunroof are open
- When the wind of the cooling /
heating device is strong
- When entering and passing through tunnels
(Continued) 4 12
(Continued)
- When driving on rugged and uneven roads
- During severe rain (heavy rains, windstorms) Phone related voice commands can be used only when a Bluetooth Wireless Technology device is connected. When making calls by stating a name, the corresponding contact must be downloaded and stored within the audio system. After downloading the Bluetooth Wireless Technology phone book, it takes some times to convert the phone book data into voice infor-
mation. During this time, voice recognition may not properly oper-
ate. Pronounce the voice commands naturally and clearly as if in a nor-
mal conversation. CD Player :
Features of your vehicle No logo will be shown if the BluetoothWireless Technology feature is not supported. 4 13 Features of your vehicle SYSTEM CONTROLLERS AND FUNCTIONS Display and settings may differ depending on the selected audio. Audio Head Unit
(1) Ejects the disc.
(EJECT) 4 14 RADIO
(2) Changes to FM/AM/SIRIUSTM mode. Each time the key is pressed, the mode is changed in order of FM1 FM2 AM SAT1 SAT2 SAT3. In Setup>Display, the radio pop up screen will be displayed when
[Mode Pop up] is turned When the pop up screen is dis-
TUNE knob or played, use the keys
~
to select the desired mode. On 1 6
. MEDIA
(3) Changes to CD, USB(iPod), AUX, My Music, BT Audio mode. Each time the key is pressed, the mode is changed in order of CD, USB(iPod), AUX, My Music, BT Audio. In Setup>Display, the media pop up screen will be displayed when
[Mode Pop up] is turned When the pop up screen is dis-
TUNE knob or played, use the keys
~
to select the desired mode. On 1 5
. PHONE
(4) Operates Phone Screen When a phone is not connected, the connection screen is displayed.
(5) PWR/VOL knob Power : Turns power On/Off by pressing the knob Volume : Sets volume by turning the knob left/right SEEK TRACK
(6) Radio Mode : Automatically search-
es for broadcast frequencies. CD, USB, iPod, My Music modes
- Shortly press the key (under 0.8 sec-
onds): Moves to next or previous song
(file)
- Press and hold the key (over 0.8 sec-
onds): Rewinds or fast-forwards the current song. BT Audio mode : Moves to next or previous song(file) The Play/Pause feature may oper-
ate differently depending on the mobile phone. SCAN
(8) Radio Mode
- Shortly press the key : Previews each broadcast for 5 seconds each.
- Press and hold the key (over 0.8 seconds): Previews the broadcasts saved in Preset for 5 seconds each.
~
6 1 DISP
(7) Each time the button is shortly pressed (under 0.8 seconds), it sets the screen Off Screen On Screen Off Audio operation is maintained and only the screen will be turned Off. In the screen Off state, press any key to turn the screen On again. Press the key again to continue listening to the current frequency. SCAN SAT Radio does not support the Preset scan feature. CD, USB, My Music mode
- Shortly press the key (under 0.8 seconds): Previews each song
(file) for 10 seconds each. Press the key again to continue listening to the current song (file). SCAN Features of your vehicle SETUP CLOCK
(9) Shortly press the key (under 0.8 sec-
onds) : Moves to the Display, Sound, Clock, Phone, System setting modes Press and hold the key (over 0.8 sec-
onds) : Move to the Time setting screen MENU
(10) Displays menus for the current mode. iPod List : Move to parent category
(11) TUNE knob Radio mode : Changes frequency by turning the knob left/right. CD, USB, iPod, My Music mode:
Searches songs (files) by turning the knob left/right. When the desired song is displayed, press the knob to play the song. Moves focus in all selection menus and selects menus. 4 15 Features of your vehicle CAT
(12) FOLDER Radio Mode
- SIRIUSTM RADIO : Category Search MP3, CD, USB mode : Folder Search
(13) MUTE
(14) BACK 1 6
~
(Preset)
(15) Radio Mode: Saves frequencies
(channels) or receives saved fre-
quencies (channels) CD, USB, iPod, My Music mode
-
-
In the Radio, Media, Setup, and Menu pop up screen, the number menu is selected.
: Repeat
: Random 1 RPT 2 RDM 4 16 FM
(16) Changes to FM mode. Each time the key is pressed, the mode changed in order of FM1 FM2. AM
(17) Changes to AM mode. SETUP Display Settings Press the through Select menu through SETUP TUNE knob or 1 key TUNE knob key Select [Display]
Features of your vehicle
/
Off Mode Pop up
[Mode Pop up] Changes selection mode During On state, press the On RADIO key to display the mode MEDIA or change pop up screen. Text Scroll
[Text Scroll] Set
/
: Maintains scroll
: Scrolls only one (1) time. On On Off Off Media Display When playing an MP3 file, select the desired display info from Folder/File or Album/Artist/Song. 4 17 Features of your vehicle SOUND SETTINGS Press the through Select menu through SETUP TUNE knob or 2 key TUNE knob key Select [Sound]
Sound Settings This menu allows you to set the Bass, Middle, Treble and the Sound Fader and Balance. Select menu through
[Sound Settings] Select TUNE knob Turn TUNE knob left/right to set Bass, Middle, Treble : Selects the sound tone. Fader, Balance : Moves the sound fader and balance. Default : Restores default settings. Back : While adjusting values, TUNE knob will pressing the restore the parent menu. 4 18 Speed Dependent Volume Control This feature is used to automatically control the volume level according to the speed of the vehicle. Select [Speed Dependent Vol.] Set in 4 levels [Off/Low/Mid/High] of TUNE knob Voice Recognition Volume Adjusts voice recognition volume. Select [Voice Recognition Vol.] Set volume of TUNE knob SYSTEM SETTINGS the Press
[System] Select menu through TUNE knob SETUP key Select Memory Information Displays currently used memory and total system memory. Select [Memory Information] OK The currently used memory is dis-
played on the left side while the total system memory is displayed on the right side. Prompt Feedback This feature is used to change voice command feedback between Normal and Expert modes. Select through On : This mode is for beginner users and provides detailed instruc-
tions during voice command opera-
tion.
[Prompt Feedback] Set TUNE knob Features of your vehicle Off : This mode is for expert users and omits some information during voice command operation. (When using Expert mode, guidance instructions can be heard through the [Help] or [Menu] commands. Language This menu is used to set the display and voice recognition language. Select [Language]
Set through TUNE knob The system will reboot after the language is changed. Language support by region
- English, Francais, Espanol 4 19 Features of your vehicle RADIO : FM, AM OR SIRIUSTM Changing RADIO mode (FM, AM or SIRIUSTM) Adjust Volume Turn the adjust the volume. VOL knob left/right to SEEK TRACK SEEK Press the Shortly pressing the key (under 0.8 seconds): Automatically searches for the next station. key RADIO Press the mode AMSAT1SAT2SAT3. key to change the in order of FM1FM2 When the power is off, press the key to turn on the audio system RADIO and receive radio broadcasts. Pressing and holding the key (over 0.8 seconds): While holding the key
, frequency changes without stop-
ping. When the key is released, automatically searches for the next frequency from that point.
[Mode Pop up] On state : Displays the change radio mode pop up screen. While the pop up screen is displayed, you can change the radio mode
(FM1FM2AMSAT1SAT2SAT3) through the tune knob or keys.
~
6 1 4 20 Preset SEEK Press the 1 Shortly pressing the key (under 0.8 frequency seconds): Plays saved in the corresponding key. the key
~
6 Pressing and holding the key (over 0.8 seconds): Pressing and holding the desired key from will save the currently playing broadcast to the selected key and sound a BEEP.
~
6 1 key SCAN SCAN Press the Shortly pressing the key (under 0.8 seconds): The broadcast frequency increases and previews each broadcast for 5 seconds each. After scanning all frequencies, returns and plays the current broadcast fre-
quency. Pressing and holding the key (over 0.8 seconds): Previews the broad-
casts saved in Preset for 5 seconds each.
~
6 1 Selecting through manual search Turn the adjust the frequency. FM : Changes by 200KHz AM : Changes by 10KHz TUNE knob left/right to MENU Within
(Auto Store) and Info functions. MENU key are the A.Store key Set [A.Store]
MENU TUNE knob or A.Store Press the through Saves broadcasts with superior reception to keys. If no frequencies are received, then the most recently received frequency will be broadcast. key.
~
6 1 1 Features of your vehicle 4 21 Features of your vehicle SIRIUSTM Satellite Radio information Satellite Radio channels:
SIRIUSTM Satellite Radio has over 130 channels, including 69 channels of 100% commercial-free music, plus sports, news, talk and entertainment available nationwide in your vehicle. For more information and a complete list of SIRIUSTM Satellite Radio chan-
nels, visit sirius.com in the United States, sirius-canada.ca in Canada, or call SIRIUSTM at 1-888-539-7474. Satellite Radio reception factors:
To receive the satellite signal, your vehicle has been equipped with a satellite radio antenna located on the roof of your vehicle. The vehicle roof provides the best location for an unobstructed, open view of the sky, a requirement of a satellite radio sys-
tem. Like AM/FM, there are several factors that can affect satellite radio reception performance:
Antenna obstructions: For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other material as far away from the antenna as possible. 4 22 Terrain: Hills, mountains, tall build-
ings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunder-
storms can interfere with your reception. SIRIUSTM Satellite Radio service:
SIRIUSTM Satellite Radio is a subscrip-
tion-based satellite radio service that broadcasts music, sports, news and entertainment programming to radio receivers, which are available for installa-
tion in motor vehicles or factory installed, as well as for the home, portable and wireless devices, and through an Internet connection on personal computer. Vehicles that are equipped with a factory installed SIRIUSTM Satellite Radio sys-
tem include:
Hardware and an introductory trial sub-
scription term, which begins on the date of sale or lease of the vehicle. For a small upgrade fee, access to SIRIUSTM music channels, and other select channels over the Internet using any computer connected the Internet (U.S. customers only). For information on extended subscrip-
tion terms, contact SIRIUSTM at 1-888-
539-7474. to NOTE:
SiriusXM service requires a sub-
scription, sold separately, after 3-
month trial included with vehicle purchase. If you decide to contin-
ue your SiriusXM service at the end of your trial subscription, the plan you choose will automatical-
ly renew and bill at then-current rates until you call Sirius XM at 1-
866-635-2349 to cancel. See our Customer Agreement for com-
plete terms at www.siriusxm.com. Programming subject to change. Sirius satellite service is available only to those at least 18 and older in the 48 contiguous USA, D.C., and PR (with coverage limita-
tions). Traffic information not available in all markets. See sir-
iusxm.com/traffic for details. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. Please note that the vehicle will need to be turned on, in Sirius mode, and have an unobstructed view of the sky in order for the radio to receive the activation signal. SEEK Press the Shortly pressing the key (under 0.8 seconds): select previous or next chan-
nel. RADIO key Pressing and holding the key (over 0.8 seconds): continuously move to previ-
ous or next channel. If the Category icon is displayed, channels are changed within the cur-
rent category. SIRIUSTM RADIO Using SIRIUSTM Satellite Radio Your Kia vehicle is equipped with a 3 month complimentary period of SIR-
IUSTM Satellite Radio so you have access to over 130 channels of music, information, and entertain-
ment programming. Activation In order to extend or reactivate your subscription to SIRIUSTM Satellite Radio, you will need to contact SIR-
IUSTM Customer Care at 1-888-539-
7474. Have your 12 digit SID (Sirius Identification Number)
/ ESN
(Electronic Serial Number) ready. To retrieve the SID / ESN, turn on the radio, press the [RADIO] button, and tune to channel zero. Features of your vehicle key RADIO SCAN Press the Shortly pressing the key (under 0.8 seconds): Previews each broadcast for 5 seconds each SCAN key again to contin-
Press the SCAN ue listening to the current frequency If the Category icon is displayed, channels are changed within the cur-
rent category. CAT Category the Press through the The display will indicate the category menus, highlight the category that the current channel belongs to. TUNE knob key Set FOLDER In the Category List Mode, press the key to navigate category CAT FOLDER list. Press the tune knob to select the lowest channel in the highlighted category. If channel is selected by selecting cat-
egory, then the CATEGORY icon is displayed at the top of the screen. 4 23 Tune Rotate TUNE knob : Changes the channel number or scrolls cate-
gory list. Press menu. TUNE knob : Selects the Menu Select category menu through the key Info] through the TUNE TUNE knob Press the Select [
knob or MENU key 1 RPT Info (Information) Displays the Artist/Song info of the current song. Features of your vehicle Preset Press the Shortly pressing the key (under 0.8 seconds): Plays the frequency saved in the corresponding key. RADIO key
~
6 1 Pressing and holding the key (over 0.8 seconds): Pressing and holding the desired key from will save the current broadcast to the selected key and sound a BEEP.
~
6 1 Troubleshooting 1. Antenna Error If this message is displayed, the anten-
na or antenna cable is broken or unplugged. Please consult with your Kia dealership. 2. Acquiring Signal If this message is displayed, it means that the antenna is covered and that the SIRIUSTM Satellite Radio signal is not available. Ensure the antenna is uncovered and has a clear view of the sky. 4 24 BASIC METHOD OF USE :
Audio CD / MP3 CD / USB /
iPod / My Music MEDIA key to change the Press the mod mode in order of CD USB(iPod) AUX My Music BT Audio. The folder/file name is displayed on the screen. Features of your vehicle Repeat While song (file) is playing
(RPT) key Audio CD, MP3 CD, USB, iPod, My Music mode: RPT on screen To repeat one song (press the key) 1 RPT
: Repeats the current song.
<USB>
MP3 CD, USB mode: FLD.RPT on screen To repeat folder (pressing twice):
repeats all files within the current folder.
<My Music>
Press the off repeat. 1 RPT key again to turn
<Audio CD>
The CD is automatically played when a CD is inserted. The USB music is automatically played when a USB is connected.
<CD MP3>
Random While song (file) is playing
(RDM) key Audio CD, My Music mode: RDM on screen Random (press the key) : Plays all 2 RDM songs in random order. 4 25
(file) is playing While song key SEEK TRACK next song. Shortly pressing the key : Plays the Pressing and holding the key (over 0.8 seconds): Fast forwards the song. Scan While song (file) is playing key Shortly pressing the key : Scans all songs from the next song for 10 seconds each. SCAN Press the off. SCAN key again to turn The SCAN function is not support-
ed in iPod mode. CAT file FOLDER is playing Folder Search : MP3 CD, USB Mode While
(Folder Up) key Searches the next folder. While
(Folder Down) key Searches the parent folder. If a folder is selected by pressing the TUNE knob, the first file within the selected folder will be played. is playing FOLDER file CAT In iPod mode, moves to the Parent Folder. Searching Songs (File) Turning TUNE knob : Searches for songs (files) Pressing TUNE knob : Plays selected song (file). Features of your vehicle MP3 CD, USB mode: FLD.RDM on screen Folder Random (press the key) :
Plays all files within the current fold-
er in random order. iPod mode: ALL RDM on screen All Random (press the key) : Plays all files in random order. MP3 CD, USB : ALL RDM on screen All Random (pressing twice): Plays all files in random order. Press the off random. 2 RDM key again to turn Changing Song/File While song key
(file) SEEK TRACK is playing Shortly pressing the key : Plays the current song from the beginning. SEEK TRACK If the key is pressed again within 2 second, the previ-
ous song is played. Pressing and holding the key (over 0.8 seconds): Rewinds the song. 4 26 MENU : Audio CD Press the CD MP3 mode to set Information features. key the Repeat, Random, MENU MENU key Set [
TUNE knob or Information Press the through the key to display information of the cur-
rent song. Press the info display. key to turn off Info]
3 MENU MENU Repeat Press the through the to repeat the current song. Press RPT again to turn off. TUNE knob or key Set [ RPT]
key 1 RPT MENU Random key Set [ RDM]
Press the through the 2 RDM key to randomly play songs within the current folder. Press RDM again to turn off. TUNE knob or Features of your vehicle MENU : MP3 CD / USB Press the CD MP3 mode key to set the Repeat, Folder Random, Folder Repeat, All Random, Information, and Copy features. MENU MENU Repeat Press the through the TUNE knob or key to repeat the current song. Press RPT again to turn off. key Set [ RPT]
1 RPT 4 27 Features of your vehicle MENU Folder Random key Set [ F.RDM]
Press the through the 2 RDM key to randomly play songs within the current folder. Press F.RDM again to turn off. TUNE knob or key Set [ F.RPT]
Folder Repeat Press the MENU through the key to repeat songs within the cur-
rent folder. Press F.RPT again to turn off. TUNE knob or 3 MENU All Random key Set [ A.RDM]
Press the through the TUNE knob or key to randomly play all songs within the CD. Press A.RDM again to turn off. 4 Information Press the through the key to display information of the cur-
rent song. key Set [
TUNE knob or Info]
5 MENU 4 28 Press the info display. MENU key to turn off 6 MENU key Set [
Copy Press the Copy] through the or This is used to copy the current song into My Music. You can play the copied Music in My Music mode. TUNE knob key. If another key is pressed while copying is in progress, a pop up asking you whether to cancel copying is displayed. If another media is connected or inserted (USB, CD, iPod, AUX) while copying is in progress, copy-
ing is canceled. Music will not be played while copying is in progress. MENU : iPod In iPod mode, press the key to set the Repeat, Random, Information and Search features. MENU MENU Repeat Press the through the TUNE knob or key to repeat the current song. Press RPT again to turn repeat off. key Set [ RPT]
1 RPT MENU key Set [ RDM]
1 RDM Random Press the through the key. Plays all songs within the currently playing category in random order. Press RDM again to turn off. TUNE knob or MENU key Set [
TUNE knob or Information Press the through the key. Displays information of the current song. Press the info display. key to turn off Info]
3 MENU MENU Search Press the through the key. Displays iPod category list. Searching iPod key Set [ Search]
TUNE knob or 4 is key pressed, move to par-
category MENU ent category. Features of your vehicle 4 29 Features of your vehicle MENU : My Music Mode In My Music mode, press the MENU key to set the Repeat, Random, Information, Delete, Delete All, and Delete Selection features. MENU Repeat Press the through the key. Repeats the currently playing song. Press RPT again to turn repeat key Set [ RPT]
1 RPT TUNE knob or off. MENU key Set [
TUNE knob or Information Press the through the key. Displays information of the current song. Press the info display. key to turn off Info]
3 MENU MENU TUNE knob or key Set [ Delete]
Delete Press the through the key. Deletes currently playing file In the play screen, pressing delete will delete the currently playing song. Deletes file from list 4 MENU Random Press the through the Plays all songs in random order. Press RDM again to turn random off. key Set [ RDM]
TUNE knob or 2 RDM key. 4 30 Select the file you wish to delete by using the TUNE knob. Press the key and select the delete menu to delete the selected file. MENU Delete All Press the through the TUNE knob or 5 Deletes all songs of My Music. key Set [ Del.All]
key. MENU MENU key Set [ Del.Sel]
Delete Selection Press the through the key. Songs within My Music are selected and deleted. Select the songs you wish to TUNE knob or 6 delete from the list. After selecting, press MENU and select the delete menu. key My Music Even if memory is available, a maximum of 6,000 songs can be stored. The same song can be copied up to 1,000 times. Memory info can be checked in the System menu of Setup. AUX AUX is used to play external MEDIA currently connected with the AUX terminal. AUX mode will automatically start when an external device is connect-
ed with the AUX terminal. If an external device is connected, you can also press the key to change to AUX mode. MEDIA AUX mode cannot be started unless there is an external device connected to the AUX terminal. AUX Fully insert the AUX cable into the AUX terminal for use. Features of your vehicle 4 31 Features of your vehicle BluetoothWireless Technology AUDIO What is BluetoothWireless Technology?
Bluetooth Wireless Technology allows devices to be connected in a short dis-
tance, including hands-free devices, stereo headsets, wireless remote con-
trollers, etc. For more information, visit the BluetoothWireless Technology website at www.Bluetooth.com Before using Bluetooth Wireless Technology audio features Bluetooth Wireless Technology audio may not be supported depend-
ing on the compatibility of your Bluetooth Wireless Technology mobile phone. In order to use Bluetooth Wireless Technology audio, you must first pair and connect the Bluetooth Wireless Technology mobile phone. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. Other trademarks and trade names are those of their respective owners. A Bluetooth enabled cell phone is required to use BluetoothWireless Technology WARNING Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe personal injury, and death. The drivers primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle sys-
tems which take the drivers eyes, attention and focus away from the safe operation of a vehi-
cle or which are not permissible by law should never be used dur-
ing operation of the vehicle. 4 32 Bluetooth Wireless Technology audio can be used only when the
[Audio Streaming] of Phone is turned On
. Setting Bluetooth Wireless Technology Audio Streaming : Press the SETUP key Select [Phone] Select [Audio Streaming] through the TUNE knob Set On Off
/
Starting BluetoothWireless Technology Audio Press the key to change the of mode CDUSBAUXMy MusicBT Audio. order MEDIA in If BT Audio is selected, Bluetooth Wireless Technology audio will start playing. Audio may not automatically start playing in some mobile phones. Features of your vehicle Using the BluetoothWireless Technology audio features Play / Stop Press the pause the current song. TUNE knob to play and or SEEK TRACK SEEK TRACK Previous / Next song Press previous or next song. The previous song / next song /
play / pause functions may not be supported in some mobile phones. to play 4 33 Features of your vehicle PHONE Making a call using the Steering-wheel mount controls Before using the Bluetooth Wireless Technology phone features In order to use Bluetooth Wireless Technology phone, you must first pair and connect the Bluetooth Wireless Technology mobile phone. If the mobile phone is not paired or connected, it is not possible to enter Phone mode. Once a phone is paired or connected, the guid-
ance screen will be displayed. If Priority is set upon vehicle igni-
tion (IGN/ACC ON), the Bluetooth Wireless Technology phone will be automatically connected. Even if you are outside, the Bluetooth Wireless Technology phone will be automatically connected once you are in the vicinity of the vehicle. If you do not want automatic Bluetooth Wireless Technology phone the Bluetooth Wireless Technology power to OFF connection, set 4 34
(1) MUTE button : Mute the micro-
phone during a call.
(2) VOLUME button : Raises or low-
ers speaker volume.
(3) button : Places and transfers calls.
(4) button : Ends calls or cancels functions.
(5) button : Activates voice recog-
nition. Check call history and making call Shortly press (under 0.8 seconds) key on the steering the remote controller. The call history list will be dis-
played on the screen. Press the key again to con-
nect a call to the selected number. Redialing the most recently called number Press and hold (over 0.8 seconds) key on the steering the remote controller. The most recently called number is redialed. BluetoothWireless Technology Pairing a Bluetooth Wireless Technology Device the Bluetooth What is Bluetooth Wireless Technology Pairing?
Pairing refers to the process of syn-
chronizing your Bluetooth Wireless Technology phone or device with the car audio system for connection. Pairing is necessary to connect and use Wireless Technology feature. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. Other trademarks and trade names are those of their respective owners. A Bluetooth enabled cell phone is required to use Bluetooth Wireless Technology WARNING Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe personal injury, and death. The drivers primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle sys-
tems which take the drivers eyes, attention and focus away from the safe operation of a vehi-
cle or which are not permissible by law should never be used dur-
ing operation of the vehicle. PHONE Pairing on the Steering Remote Controller Key /
Key When No Devices have been Paired 1. Press the key on the steering remote controller. The following screen is displayed. key or the PHONE 2. Select
[OK] button to enter the Pair Phone screen. Features of your vehicle 1)Car Name : Name of device as shown when searching from your Bluetooth Wireless Technology device 2) Passkey : Passkey used to pair the device 3. From your Bluetooth Wireless Technology device (i.e. Mobile Phone), search and select your car audio system. 4. After a few moments, a screen is displayed where the passkey is entered. the to pair your passkey 0000 Bluetooth Wireless Technology device with the car audio system. 5. Once pairing is complete, the fol-
Here, enter lowing screen is displayed. 4 35 Pairing through [PHONE]
Setup the SETUP Press
[Phone] Select Select TUNE knob key Select
[Pair Phone]
key or the If Bluetooth Wireless Technology devices are paired but none are currently connected, pressing the key on the PHONE steering wheel displays the follow-
ing screen. Select [Pair] button to pair a new device or select
[Connect] to connect a previously paired device. 1. The following steps are the same as those described in the section
"When No Devices have been Paired" on the previous page. Features of your vehicle Some phones (i.e., iPhone, Android and Blackberry phones) may offer an option to allow acceptance of all future Bluetooth connection requests by
"Visit http://www.kia.com/#/bluetooth for additional information on pairing your Bluetooth-enabled mobile phone, and to view a phone compatibility list. default."
and 4 36 Bluetooth Wireless Technology features supported within the vehi-
cle are as follows. Some features may not be supported depending on your Bluetooth Wireless Technology device.
- Outgoing/Incoming Handsfree calls
- Operations during a call (Switch to Private, Switch to call waiting, MIC on/off)
- Downloading Call History
- Downloading Mobile Contacts
- Bluetooth Wireless Technology device auto connection
- Bluetooth Audio Streaming Up to five Bluetooth Wireless Technology devices can be paired to the Car Handsfree system. Only one Bluetooth device can be connected at a time. Only one Bluetooth Wireless Technology device can be connect-
ed at a time. Other devices cannot be paired while a Bluetooth Wireless Technology device is connected. Only Bluetooth Wireless Technology and Bluetooth audio related features are supported. Handsfree Bluetooth related operations are possible only within devices that support Handsfree or audio fea-
tures, such as a Bluetooth Wireless Technology mobile phone or a Bluetooth audio device. Features of your vehicle After pairing is complete, a con-
tacts download request is sent once to the mobile phone. Some mobile phones may require confir-
mation upon receiving a download request, ensure your mobile phone accepts the connection. Refer to your phones users manual for additional information regarding phone pairing and connections. range, If a connected Bluetooth Wireless Technology device becomes dis-
connected due to being out of com-
munication the device OFF, or a Bluetooth Wireless Technology communica-
tion error, corresponding Bluetooth Wireless Technology devices are automatically searched and recon-
nected. turning If the system becomes unstable due to communication errors between the car Handsfree and the Bluetooth Wireless Technology device, reset the device by turning off and back on again. Upon reset-
Wireless ting Technology device, the system will be restored. Bluetooth 4 37 Features of your vehicle Connecting a Device Press
[Phone] Select [Phone List]
SETUP the key Select From the paired phone list, select the device you want to connect and select [Connect]. 1) Connected Phone : Device that is currently connected 2) Paired Phone : Device that is paired but not connected 4 38 Features of your vehicle Priority icon will be displayed when the selected phone is set as a pri-
ority phone. Changing Priority What is Priority?
It is possible to pair up to five Bluetooth Wireless Technology devices with the car audio system. The "Change Priority" feature is used to set the connection priority of paired phones. From the paired phone list, select the phone you want to switch to the highest priority, then select [Change Priority] button from the Menu. The selected device will be changed to the highest priority. Press
[Phone] Select [Phone List]
SETUP the key Select 4 39 Features of your vehicle Disconnecting a Device Deleting a Device Press
[Phone] Select [Phone List]
SETUP the key Select Press
[Phone] Select [Phone List]
SETUP the key Select When deleting the currently con-
nected device, the device will auto-
matically be disconnected to pro-
ceed with the deleting process. If a paired Bluetooth Wireless Technology device is deleted, the devices call history and contacts data will also be deleted. To re-use a deleted device, you must pair the device again. From the paired phone list, select the currently connected device and select
[Disconnect] button. From the paired phone list, select the device you want to delete and select
[Delete] button. 4 40 USING Bluetooth Wireless Technology Phone Menu Screen Phone Menus With a Bluetooth Wireless Technology device connected, press the key to display the Phone menu screen. PHONE If you select the [Call History] but-
ton but there is no call history data, a prompt is displayed which asks to download call history data. If you select the [Contacts] button but there is no contacts data stored, a prompt is displayed which asks to download contacts data. This feature may not be supported in some mobile phones. For more information on download support, refer to your mobile phone users manual. 1) Favorite : Up to 20 frequently used contacts saved for easy access. 2) Call History : Displays the call his-
tory list screen 3) Contacts : Displays the Contacts list screen 4) Setup : Displays Phone related settings. Features of your vehicle Answering Calls Answering a Call Answering a call with a Bluetooth Wireless Technology device connect-
ed will display the following screen. To accept the call, press key on the steering wheel while the call is incoming. 1) Caller : Displays the other partys name when the incoming caller is saved within your contacts 2) Incoming Number : Displays the incoming number 4 41 Features of your vehicle Favorites Press the
[Favorites]
When an incoming call pop-up is displayed, most Audio and SETUP mode features are disabled. Only the call volume will operate. The telephone number may not be properly displayed in some mobile phones. When a call is answered with the mobile phone, the call mode will automatically revert to Private mode. Call History PHONE key Select Press the History]
PHONE key Select [Call 1) Saved favorite contact : Connects call upon selection 2) To add favorite : Downloaded con-
tacts be saved as favorite. To save Favorite, contacts should be downloaded. Contact saved in Favorites will not be automatically updated if the contact has been updated in the phone. To update Favorites, delete the Favorite and create a new Favorite. A list of incoming, outgoing and missed calls is displayed. Call history may not be saved in the call history list in some mobile phones. Calls received with hidden caller ID will not be saved in the call history list. Calling through the call history is not pos-
sible when there is no call history stored or a Bluetooth Wireless Technology phone is not connected. Up to 20 received, dialed and missed calls are stored in Call History. Time of received/dialed calls and call time information are not stored in Call History. 4 42 Contacts Press
[Contacts]
the PHONE key Select The list of saved phone book entries is displayed. NOTE:
Find a contact in an alphabetical order, press the [MENU] key. Up to 1,000 contacts saved in your Bluetooth Wireless Technology phone can be downloaded into the car contacts. Contacts that have been downloaded to the car cannot be edited or deleted on the phone. Mobile phone contacts are man-
aged separately for each paired Bluetooth Wireless Technology device (max 5 devices x 1,000 con-
tacts each). Previously downloaded data is maintained even if the Bluetooth Wireless Technology device has been disconnected.
(However, the contacts and call his-
tory saved to the phone will be deleted if a paired phone is delet-
ed.) It is possible to download contacts during Bluetooth streaming audio. When downloading contacts, the icon will be displayed within the sta-
tus bar. It is not possible to begin down-
loading a contact list when the con-
tact download feature has been turned off within the Bluetooth Wireless Technology device. In addition, some devices may require Features of your vehicle device authorization upon attempt-
ing to download contacts. If down-
loading does not normally occur, check the Bluetooth Wireless Technology device settings or the screen state. The contacts download feature may not be supported in some mobile phones. For more information of supported Bluetooth devices and function support, refer to your phones user manual. 4 43 Features of your vehicle Bluetooth Wireless Technology Setting The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. Other trademarks and trade names are those of their respective owners. A Bluetooth enabled cell phone is required to use Bluetooth Wireless Technology WARNING Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe personal injury, and death. The drivers primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle sys-
tems which take the drivers eyes, attention and focus away from the safe operation of a vehi-
cle or which are not permissible by law should never be used dur-
ing operation of the vehicle. 4 44 Pairing a New Device Press
[Phone] Select [Pair Phone]
SETUP the key Select Viewing Paired Phone List Press
[Phone] Select [Phone List]
SETUP the key Select Bluetooth Wireless Technology devices can be paired with the audio system. For more information, refer to the Pairing through Phone Setup sec-
tion within Bluetooth Wireless Technology. This feature is used to view mobile phones that have been paired with the audio system. Upon selecting a paired phone, the setup menu is dis-
played. For more information, refer to the Wireless Setting Bluetooth section Technology Connection within Bluetooth Wireless Technology. 1) Connect/Disconnect Phone
:
Connect/ disconnects currently selected phone 2) Change Priority : Sets currently selected phone to highest connec-
tion priority 3) Delete : Deletes the currently selected phone 4) Return : Moves to the previous screen To learn more about whether your mobile phone supports contacts downloads, refer to your mobile phone users manual. The contacts for only the connected phone can be downloaded Downloading Contacts Press key Select
[Phone] Select [Contacts Download]
SETUP the Features of your vehicle Audio Streaming Press the
[Phone] Select [Audio Streaming]
key Select SETUP When Audio Streaming is turned on, you can play music files saved in your Bluetooth Wireless Technology device through the audio system. As the contacts are downloaded from the mobile phone, a download progress bar is displayed. Upon downloading phone contacts, the previous corresponding data is deleted. This feature may not be supported in some mobile phones. Voice Recognition may not operate while contacts are being down-
loaded. 4 45 Features of your vehicle Outgoing Volume Press
[Phone] Select [Outgoing Volume]
key Select SETUP the Use going volume level. TUNE knob to adjust the out-
While on a call, the volume can be SEEK TRACK changed by using the key. 4 46 the SETUP Turning BluetoothSystem Off Press key Select
[Phone] Select [Bluetooth System Off]
Once Bluetooth Wireless Technology is turned off, Bluetooth Wireless Technology related features will not be supported within the audio system. To turn Bluetooth Wireless SETUP Technology back on, go to
[Phone] and select Yes. VOICE RECOGNITION Using Voice Recognition Starting Voice Recognition Shortly press the steering wheel .Say a command key on the If prompt feedback is in [ON], then the system will say Please say a command after the beep (BEEP) If prompt feedback is in [OFF]
mode, then the system will only say
(BEEP) Contact List Best Practices 1)Do not store single-name entries
(e.g., Bob, Mom, Kim, etc.). Instead, always use full names
(including first and last names) for all contacts (e.g., use Jacob Stevenson instead of Dad). 2)Do not use abbreviations (i.e., use instead of Lt. or Lieutenant Sergeant instead of Sgt.). 3)Do not use acronyms (i.e., use County Finance Department instead of CFD). 4)Do not use special characters
(e.g., @, hyphen -, asterisk *, ampersand &). 5)If a name is not recognized from the contact list, change it to a more descriptive name
(e.g., use Grandpa Joseph instead of Pa Joe). Features of your vehicle Skipping Prompt Messages While prompt message is being stat-
ed Shortly press the key on the steering remote controller The prompt message is immediately ended and the beep tone will sound. After the beep, say the voice com-
mand. Re-starting Voice Recognition While system waits for a command Shortly press the steering remote controller The command wait state is immedi-
ately ended and the beep ton will sound. After the beep, say the voice command. key on the To change Prompt Feedback
[System]
[On]/[Off], go to SETUP
[Prompt Feedback]
For proper recognition, say the command after the voice instruc-
tion and beep tone. 4 47 Features of your vehicle ENDING VOICE RECOGNITION While Voice Recognition is operating key on the Press and hold the steering remote controller While using voice command, press-
ing any steering wheel control or a different key will end voice com-
mand. When the system is waiting for a voice command, say cancel or end to end voice command. When the system is waiting for a voice command, press and hold the key on the steering wheel to end voice command. 4 48 Voice Recognition and Phone Contact Tips:
The Kia Voice Recognition System may have difficulty understanding some accents or uncommon names. When Voice using Recognition to place a call, speak in a moderate tone, with clear pronun-
ciation To maximize the use of Voice Recognition, consider these guide-
lines when storing contacts:
Do not store single-name entries
(e.g., Bob, Mom, etc.). Instead, always use full names (including first and last names) for these con-
tacts Do not use special characters (e.g.,
'@', '-', '*', '&', etc.) Do not use abbreviations (i.e., use
"Lieutenant" instead of "Lt.") or acronyms
"County Finance Department" instead of
"C. F. D."; Be sure to say the name exactly as it is entered in the con-
tacts list
(i.e., use Features of your vehicle Illustration on using voice commands Starting voice command. End voice command. Shortly pressing the key (under 0.8 seconds):
Shortly pressing the key (under 0.8 seconds):
(BEEP) Please say a command after the beep (BEEP) Beep~
More Help More Help. You can say Radio, FM, AM, SIRIUSTM, Media, CD, USB, Aux, My Music, iPod, Bluetooth Audio, Phone, Call History or Contacts. Please say a command. Contacts Contacts. Please say the name of the contact you want to call. Cancel Beep Beep.. (end beep) Skipping Voice Recognition Shortly pressing the Please say a... key (under 0.8 seconds):
while guidance message is being stated Shortly pressing the key (under 0.8 seconds)
(BEEP) More Help More Help. You can say Radio, FM, AM, SIRIUSTM, Media, CD, USB, Aux, My Music, iPod, Bluetooth Audio, Phone, Call History or Contacts. Please say a command. 4 49 Features of your vehicle Voice Command List Common Commands: These commands can be used in most operations. (However a few commands may not be available during certain operations) Function Command Function Provides guidance on commands that can be used anywhere in the system. Provides guidance on commands that can be used within the current mode. Calls <Name> saved in Contacts Ex) Call John Smith Provides guidance on Phone related com-
mands. After saying this command, say Favorites,Call History, Contacts or Dial Number execute corresponding functions. Display the Favorite screen. Displays the Call History screen. Displays the Contacts screen. After saying this command, say the name of a contact saved in the Contacts to automatically con-
nect the call. Display the Dial number screen. After saying this command, you can say the number that you want to call. Connects the most recently called number. Provide guidance on how to use voice recognition and Bluetooth connections Radio FM1(FM One) FM2(FM Two) AM FM Preset 1~6 AM Preset 1~6 FM 87.5~107.9 AM 530~1710 SIRIUSTM
(Satellite) When listening to the radio, displays the next
(FM1FM2AMSAT1 radio screen. SAT2SAT3FM1) When listening to a different mode, displays the most recently played radio screen. When currently listening to the FM radio, maintains the current state. When listening to a different mode, displays the most recently played FM screen. Displays the FM1 screen. Displays the FM2 screen. Displays the AM screen. Plays the most recently played broadcast saved in FM Preset 1~6. Plays the broadcast saved in AM Preset 1~6. Plays the FM broadcast of the corresponding frequency. Plays the AM broadcast of the corresponding frequency. When currently listening to the SIRIUSTM, maintains the current state. When listening to a different mode, displays the most recently played SIRIUSTM screen. Command More Help Help Call<Name>
Phone Favorites Call History Contacts
(Call by Name) Dial Number Redial Tutorial 4 50 Features of your vehicle Command Function My Music AUX (Auxiliary) Bluetooth Audio Plays the music saved in connected Bluetooth Plays the music saved in My Music. Plays the connected external device. Please repeat Cancel (Exit) device. Repeats the most recent comment. Ends voice command. Command Function SIRIUSTM (Satellite) Displays the selected SIRIUSTM screen. 1~3 SIRIUSTM Channel Plays the selected SIRIUSTM channel. 0~223 Media CD USB iPod Moves to the most recently played media screen. Plays the music saved in the CD. Plays USB music. Plays iPod music. 4 51 Features of your vehicle FM/AM radio commands: Commands available during FM, AM radio operation. Satellite radio commands: Commands that can be used while listening to Satellite Radio. Command Scan Preset 1~6 Information Function Scans receivable channels from the current broadcast and plays for 10 seconds each. Plays the broadcast saved in Preset 1~6. Displays the information of the current broad-
cast. Command Preset 1~6 Auto Store Seek up Seek down Scan Preset Scan Information Function Plays the broadcast station saved in Preset 1~6. Automatically selects radio broadcast fre-
quencies with superior reception and saves in Presets 1~6. Plays the next (higher) receivable broadcast. Plays the previous (lower) receivable broad cast. Scans receivable frequencies from the current broadcast and plays for 10 seconds each. Moves to the next preset from the current present and plays for 10 seconds each. Displays the information of the current broad-
cast.(This feature can be used when receiving RBDS broadcasts.) 4 52 Audio CD commands: Commands available during Audio CD operation. MP3 CD / USB commands: Commands available dur-
ing USB and MP3 CD operation. Features of your vehicle Command Random Random Off Repeat Repeat Off Scan Track 1~30 Information Function Randomly plays the tracks within the CD. Cancels random play to play tracks in sequen-
tial order. Repeats the current track. Cancels repeat play to play tracks in sequen-
tial order. Scans the tracks from the next track for 10 seconds each. Plays the desired track number. Displays the information screen of the current track. Command Random All Random Random Off Repeat Folder Repeat Repeat Off Next File Previous File Scan Information Copy Function Randomly plays the files within the current folder. Randomly plays all saved files. Cancels random play to play files in sequential order. Repeats the current file. Repeats all files in the current folder. Cancels repeat play to play files in sequential order. Plays the next file. Plays the previous file. Scans the files from the next files for 10 sec-
onds each. Displays the information screen of the current file. Copies the current file into My Music. 4 53 Features of your vehicle iPod Commands: Commands available during iPod operation. My Music Commands: Commands available during My Music operation. Command Random Random Off Repeat Repeat Off Information Function Randomly plays the songs within the current category. Cancels random play to play songs in sequen-
tial order. Repeats the current song. Cancels repeat play to play songs in sequen-
tial order. Displays the information screen of the current song. Command Random Random Off Repeat Repeat Off Scan Information Delete Delete All Function Randomly plays all saved files. Cancels random play to play files in sequential order. Repeats the current file. Cancels repeat play to play files in sequential order. Scans the files from the next files for 10 sec-
onds each. Displays the information screen of the current file. Deletes the current file. You will bypass an additional confirmation process. Deletes all files saved in My Music. You will bypass an additional confirmation process. 4 54 Bluetooth Wireless Technology Audio Commands:
Commands available during Bluetooth Wireless Technology audio streaming from mobile phone oper-
ation Command Operation Command Function Play Pause Plays the currently paused song. Pauses the current song. Features of your vehicle NOTE:
iPod is a registered trademark of Apple Inc. iPod mobile digital device sold separately. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. A Bluetooth enabled cell phone is required to use Bluetoothwireless technology. SiriusXM service requires a subscription, sold separately, after 3-
month trial included with vehicle purchase. If you decide to continue your SiriusXM service at the end of the trial subscription, the plan you choose will automatically renew and bill at the current rates until you call SiriusXM at 1-866-635-2349 to can-
cel. See our Customer Agreement for complete terms at www.siriusxm.com. Sirius satellite service is available only to those at least 18 and older in the 48 contiguous United States, D.C., and P.R. (with coverage limitations). SiriusXM Traffic available in select markets. See siriusxm.com/traffic for more information. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. 4 55
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-05-31 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2013-05-31
|
||||
1 | Applicant's complete, legal business name |
HYUNDAI MOBIS CO., LTD.
|
||||
1 | FCC Registration Number (FRN) |
0014195663
|
||||
1 | Physical Address |
203, Teheran-ro
|
||||
1 |
Seoul, N/A 135-977
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
TQ8
|
||||
1 | Equipment Product Code |
AM1A0SLAN
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S**** C******
|
||||
1 | Title |
Senior Engineer
|
||||
1 | Telephone Number |
+82-3********
|
||||
1 | Fax Number |
+82-3********
|
||||
1 |
c******@mobis.co.kr
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/27/2013 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DIGITAL CAR AUDIO SYSTEM | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SGS KOREA CO., Ltd.
|
||||
1 | Name |
J**** J****
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
j******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0010000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC