Wireless Industrial & Medical Mouse Instruction Manual iM-WSM-1901WP Installing the Batteries When battery is low, the LED indicator will flash continuously. 1. Remove the battery cover. 2. Insert the batteries. 3. Close the battery cover. Activating the Mouse Plug the Dongle directly into your computers USB port. The mouse will automatically connect to the computer. Nano Dongle Model: iM-WSM-1901WP Mouse DPI Setting Press the DPI button on the mouse repeatedly to adjust the resolution (800 - 1200 - 1600 dpi). Energy Saving Function The mouse have an energy saving function. If mouse is not activated for approx. 5 seconds, it switches to energy saving mode. After 30 minutes of no activity, the LED switches off and enters sleep mode. To wake up the mouse, press any button or move the scroll wheel. The mouse switches off if a t ansmission signal is no longer received. If necessary, remove the nano receiver to use this energy saving function. Insert it in the receiver dock on the bottom of the mouse as the receiver is very small and can be easily lost. Hints and Tips Mouse Not Working:
1. Make sure the Nano Dongle is plugged into a USB port and the computer is on or try the Nano Dongle in a different USB port. 2. Change the battery if the mouse no longer reacts to input. 3. If the Nano Receiver is plugged into a USB hub, try plugging it directly into the computer. 4. Move the mouse closer to the receiver. 5. If the mouse is moving erratically, change the working surface which the mouse is operating on. 6. Restart the computer. Specifications Model Operating Systems Wireless Frequency Operating Range Resolution Frequency Band(s) Net Weight iM-WSM-1901WP Microsoft Windows 7 / 8 / 10 2.4GHz 6m (8m in open space) 800 / 1200 / 1600 dpi 2402.85 2480.85 MHz 80 g Features and specifications are subject to change without prior notice. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.