MediaGear User's Manual DataSavTM RA842 FCC Warning This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by doing one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Canada, Industry Canada (IC) Notices This device complies with Industry Canada licenseexempt RSS standard(s). This Class B digital apparatus complies with Canadian ICES-003 and CAN ICES-3(B)/NMB-3(B). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The IC ID for this device is 12113A-RA842 Canada, avis dIndustrie Canada (IC) Cet appareil numrique de classe B est conforme aux normes canadiennes ICES-003 et CAN ICES-3 (B) /
NMB-3 (B). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer dinterfrence et (2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement. Lidentifiant IC de cet appareil est 12113A-RA842 MediaGear Document Version Comments Date Author V0.1 V1.0 V1.1 V1.2 V1.3 V1.4 V1.5 V1.6 Initial draft Official release & Added SW requirements Update mechanical drawing and accessories in section 5.1, 5.2 & 8.1 Add USB Storage Support ( Option by FW/SW) Add section 4 for LED &
LCD Status Add Packaging ID Add USB and update PSU to 36W Update HW block diagram 2017/10/10 2017/10/24 2017/11/6 Jack Jack Jack 2017/11/21 Victor 2017/11/30 Victor 2018/01/24 2018/01/29 2018/02/07 Jack Jack Oak Frequency Range :
WIFI 2412-2462MHz BT 2402-2480MHz Modulation Technique :
WIFIb / g / N20 / N40 BT BLE Transmit Power :
WIFIb16 dBm /
g19 dBm /
N2019 dBm /
N4019.5 dBm BLE3 dBm MediaGear 1. Executive Summary 1.1. A private and secure storage provide for mobile devices data backup and charging capability. 1.2. Design for office/working desk/Soho use. 1.3. Support single user multiple mobile devices. 2. Product Features 2.1. High level product feature by three stages of product design 2.1.1. Equipped with 64/128MB MicroSD flash memory with proprietary encrypted Scope mechanism design Edition 1 PSS + Android + iPhone +
iPAD Features Charging/Backup Video/Photo Backup over wireless Browser via Smart Phone preview status by Video show thumbnail & can easy identify file thumbnail graphic change Support Single user multi devices Edition 2 PSS + Android + iPhone +
iPAD + Window + Mac Ed1+
USB storage/HDD Full Disk Encryption for USB storage Multi-user devices roles) and multi
(Owner/member Edition 3 PSS + Android + iPhone +
iPAD + Window + Mac + VPF AI Services Ed1+Ed2+
Client APP enhancement with AI technology AI
(Object detection/Classification/Face recognition) services 3. Product specification 3.1. Adopt MediaTek MT7688 SoC 3.2. 1 x MicoSD card reader support up to 2TB SDXC Version 3.0 3.3. 1 x USB Type-A (Support iPAD charge & Backup only) 3.4. 1 x Power adapter 36W (12V 3A) 3.5. Support Qi wireless charging (15W fast charging, 3 coils) 3.6. Support OS MediaGear 3.6.1. Android KitKat 4.4~4.4.4, Lollipop 5.0~5.1.1, Marshmallow 6.0~6.0.1, Nougat 7.0~7.1.2 and Oreo 8.0 and above 3.6.2. iOS X V10.10 Yosemite, V10.11 EI Capitan and MacOS V10.12 Sierra and above 4. LED indicator 4.1. LED for Auto-Backup (Front right) Green blinking (in file transfer)., Green Steady
(Device ready/backup completed) 4.2. LED for Wireless charging (Front left) Green Steady (Charging completed)., Amber
(Smart Phone Charging) 4.3. Power requirements 4.3.1. External power supply connector provided with requested safety approved 4.3.1.1. AC input 100 to 240V AC MediaGear 4.3.1.2. DC 12V 3A output center positive(WA-36A12R) 4.3.1.3. Power supply must meet below requirement Power efficiency level 6 UL and CSA approval Europe safety standard Australia safety standard China safety standard 4.3.1.3.1. 4.3.1.3.2. 4.3.1.3.3. 4.3.1.3.4. 4.3.1.3.5. 5. Mechanical Requirement 5.1. DXF files / ME drawings MediaGear 5.2. Special ME requirements 5.2.1. Reset button. MediaGear 5.2.2. 2 x LEDs 5.3. Dimensions 5.3.1. Width: 100.0 mm 5.3.2. Height: 30.8/118.0 mm 5.3.3. Depth: 117.0 mm 5.3.4. Weight: 1.5 lbs 6. Software Requirements 6.1. Any paired personal device under charging, PSS1 auto pop up Data sync. And showing xxx files scanning, xxx files backing up automatically. 6.2. Thumbnail updates to Cloud with arrow
, and re-size file under 300Kb in mobile device. User can always delete while those remaining thumbnail not required. 6.3. App interface can always showing supporting mobile devices and PSS1 device storage latest status in before/after data backup. 6.4. Can always shows P(photo) and V(Video), by category by devices for easy brows and searching purposes. 6.5. Searching function capable to search by day, year, locations (key word), name MediaGear 7. Test and Safety Requirements 7.1. ESD 7.2. EMI 7.3. FCC (U.S.A) class B 7.4. IC (Canada) /CE (Europe) /RCM (AU/New Zealand) - Option 8. Packaging and User manual 8.1. Accessories 8.1.1. AC input 100 to 240V AC adapter (36W, 12V 3A) 8.1.2. 64/128 GB MicroSD (Option) 8.2. Packaging 8.2.1. Environmental safe packaging (recycle and degradable) material 8.2.2. Pull tab open box for visual tamper evident 8.2.3. End cap use to protect switch during transportation 8.2.4. Serial number and firmware version labels needed 8.2.4.1. Matching labels on unit, retail box and shipping carton 8.2.4.2. Printing with MediaGear logo 8.2.4.3. Packaging ID (Reference only) MediaGear 8.3. User manual 8.3.1. Quick installation guide for easy setup (Open Box single page with QR code scanning for software download 9. Warranty and support and life time 9.1. One (1 years limited warranty on part and labor 9.2. Two(2 year) under normal operation