77mm 45mm MyVoice 307 Bluetooth Headset Indicator Light User Guide Headset Status Status Indicator Light (fig.1) Charging Fully charged Low battery Out of battery Out of Range Long blue The light turns off Double flash blue The light turns off Flash 4 blue every 15 sec until headset reconnect and timeout after 10 mins Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained. 3 hours are required to fully charge the headset. Troubleshooting (cont'd) Ensure your mobile phones Bluetooth feature is activated. Please refer to your mobile phone user guide for specific instruction. Ensure the headset is within ten metres range of your mobile phone and there are no obstructions, such as walls or other electronic devices in between. If the above steps do not solve your problem, please recharge the headset and remove your mobile phones battery for a while. I cant turn off the headset or the headset does not respond You may do a hardware reset on your headset if you cant turn it off or it doesnt respond. Plug charging cable into the charging socket, the headset is reset 7 14 1-24 25-47 48-70 71-95 96-118 Contents MyVoice 307 Overview Getting Started Charging Your Headset Indicator Light Pairing Your Headset with a Bluetooth Mobile Phone Using Your Headset Resetting Your Headset / Removing the Pairing History Troubleshooting Safety Information Care and Maintenance Declaration of Conformity 3 4 5 5-8 8-9 9-11 12 13-14 15-16 17-20 20 Talk and Standby Time A fully charged battery can offer up to 5 hours of talk time and up to 140 hours of standby time. The headset remains in standby mode after being turned on. Pairing Your Headset with a Bluetooth Mobile Phone 1) Ensure the headset is off. 2) To activate the pairing mode, press and hold the headsets MFB without releasing your finger until its status indicator showed long blue. 3) Activate your mobile phones Bluetooth, search Bluetooth devices, select OTE 307 and enter the passcode 0000. When the pairing is completed, the headsets status indicator will flash blue light rapidly five times. 1 8 Pairing Your Headset with a Bluetooth Mobile Phone (contd) If the pairing cannot be completed within two minutes after the pairing mode has been activated, the headsets status indicator will stay blue five seconds and then turns to standby mode. Repeat steps 1 to 3 to pair the devices again. Using Your Headset Function Button Audio Status Indicator Power ON Press and hold the MFB a short beep Flash blue light 3 times When you turn on your headset for the first time, the headset proceeds into pairing mode, i.e. the status indicator blinks green, so that you can immediately pair it with your mobile phone. 2 9 Product Specifications Bluetooth Specification:
Bluetooth Profiles Supported:
Range of Frequency:
Nominal Charging Time:
Talk Time*:
Standby Time*:
Dimensions:
v2.0 + EDR Class 2 Headset and Handsfree 2.4GHz spectrum Within 3 hours Up to 5 hours Up to 140 hours 41.5 (L) x 21.3 (W) x 11.4 (H) mm /
1.63(L) x 0.84(W) x 0.45(T) inch 8.9 grams / 0.32 ounces Weight:
* may vary due to the users habit, different modes of operation, and mobile phone settings. Using Your Headset (cont'd) Function Button Audio Power OFF a long beep Press and hold the MFB for 2 seconds Incoming call Ringtone on earphone Answer a call Press the MFB once End a call Adjust Volume Voice Dialing*
Press the MFB once Press the Volume Key once to increase/decrease by 1 step
(Total 6 levels) Press the MFB once Status Indicator Blue light for two seconds and then the light goes off Quick flashing blue light Flashing blue light Flashing blue light Flashing blue light a short beep Flashing blue light 10 Safety Information Check and observe local laws regarding the use of a mobile phone and a headset while driving. If you use the headset while driving, ensure your full attention and focus. It is your responsibility to drive safely. Consider to pull off the road before making or answering a call. Never leave your headset above any air bag deployment area inside your car as serious injury may result when an air bag deploys. Never allow children to play with the headset small parts may be of choking hazard. Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres. Turn off your headset prior to boarding an aircraft. Do not use your headset inside an aircraft. 15 Safety Information (cont'd) To prevent damage to your hearing, please do not set the listening volume too high. Do not attempt to modify the headset. Do not keep the headset near a wash basin or other wet places. Do not use the headset outdoors in the rain. Do not use the headset in stormy weather. Do not clean the headset while it is being charged. Always disconnect the charger from the headset before cleaning. Do not attempt to force open the built-in battery. Only charge the headsets built-in battery in accordance with the instructions described in this user guide. FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Care and Maintenance Headset Turn off your headset before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile phone may place an unintended call. Do not expose the headset to liquid, moisture or humidity, or rain as it is not waterproof. Do not use abrasive cleaners to clean the headset. 16 MyVoice 307 Overview 2 1 3 6 7 5 3 4 fig.1 Using Your Headset (cont'd) Power On / Off Pair with mobile phone Answer / End a call Last number redials Voice dialing 1. Multi-function Button (MFB) 2. Volume 3. Status Indicator 4. Built-in Rechargeable Battery 5. Microphone 6. Charging Socket 7. Earpiece Adjust volume Reject / Transfer a call 4 Function Button Audio Status Indicator Say the voice tag as soon as you hear the short beep and you must have recorded the voice tag into your mobile phone. Last no. Redial* Double click the MFB Reject a call*
Press and hold the Volume Key for 2 seconds While speaking, press and hold the volume Key for 2 seconds While speaking, press MFB once Call Transfer
(headset to mobile phone)*
Call Transfer
(mobile phone to headset)*
a short beep Flashing blue light Flashing blue light Flashing blue light Flashing blue light
* Subject to mobile support 11 Care and Maintenance (contd) Do not expose the headset to extremely high or low temperatures. Do not leave the headset in direct sunlight for an extended period of time. Do not leave the headset near open flames such as cooking burners. Do not dispose of the headset in a fire, as it will result in explosion. Do not bring the headset into contact with any sharp objects, as this will cause scratches and damages. Do not stick anything inside the headset, as this may damage internal components. Do not attempt to disassemble the headset as it does not contain serviceable components. If you do not plan to use the headset for a long period, please store it in a dry place that is free from extreme temperatures and dust. 17 Avoid charging the headset in extremely high or low temperatures. 18 Getting Started To use your MyVoice 307 Bluetooth headset (headset), please follow the steps below:
1. Ensure your headset is fully charged. 2. Pair your charged headset with a Bluetooth-enabled mobile phone. Charging Your Headset The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is recommended to fully charge the battery. Insert the chargers plug into the headsets USB charging socket and plug the mains charger to an AC wall outlet or plug to the PC/notebook. Factory Reset You may reset the headset to its default settings. Resetting will also remove the pairing history of your headset with the mobile phone. 1. Hold the volume key and plug charging cable into the charging socket until earpiece will beep 2 times. 2. Release the volume key. 3. The headset is reset. i.Tech Bluetooth headset is designed to work with Bluetooth devices. Due to large variability between different Bluetooth devices from different manufacturers, interoperability between the headset and all Bluetooth-enabled products is not guaranteed. 5 12 Charging Your Headset (contd) Charging Socket Charge Plug fig.2 Use only the supplied charger / USB charging cable to charge the headset. 6 Troubleshooting I can hear crackling noise. To receive the best audio quality, it is recommended to wear your headset on the same side of the body as your mobile phone. I can't hear anything in my headset. Ensure the headset is turned on and is properly charged. Ensure the headset is properly paired with the mobile phone. Make sure that the mobile phone is connected with the headset if it does not connect, either refer to the mobile phone's Bluetooth menu or by pressing the MFB once (see Using Your Headset and Pairing Your Headset with a Bluetooth Mobile Phone). I can't connect my headset with my mobile phone. Ensure your headset is turned off and is properly charged. Ensure the headset is properly paired with your mobile phone. 13 Care and Maintenance (contd) Dispose of the battery and the headset according to local regulations. Do not dispose of them as household waste. Built-in Battery Do not attempt to replace the headsets battery as it is in-built and is not changeable. Dispose of the battery according to local regulations. Do not dispose of the battery as household waste. Charge the battery in accordance with the instructions supplied with this user guide. Charger Use only the charger supplied by the headsets original manufacturer to charge the headset. Other chargers may look similar but using them could be dangerous and could damage the headset. 19 Care and Maintenance (contd) Do not attempt to disassemble the charger as it may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the headset is subsequently used. Do not use the charger outdoors or in damp areas. Declaration of Conformity We, i.Tech Dynamic Limited, declare that the following product: Product Product Name: i.Tech MyVoice 307 Model No.: C51-B307-XX is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of the above directive. A copy of the Declaration of Conformity can be found at http://www.itechdynamic.com. 20 Notes on Environmental Protection After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices must not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collection points that are set up for this purpose or designated points of sale. However, such details are defined by the national law of the respective country. This symbol on the product, the instruction manual or the packaging indicates that the product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices, you are making an important contribution in protecting our environment. 21 Federal Communications Commission (FCC) Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to 22 Federal Communications Commission (FCC) Statement (contd) provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. 23 2009 Hutchison Harbour Ring Enterprises Limited All rights in this publication are reserved and no part may be reproduced without the prior written permission of the publisher. The contents of this publication are believed to be correct at the time of going to press, but any information, specifications, products or services mentioned, and product I.D. shown may be modified, supplemented or withdrawn without further notice. The Stylized i.Tech logos are trademarks owned by Hutchison Harbour Ring Enterprises Limited or its affiliates. All other trademarks or registered trademarks belong to their respective owners. Dispose of the packaging and this product in accordance with the latest provisions. 06/2009 24