FCC ID: Y9E-IAD18010H Room Booking Panel

System Setup 1 Boot up room panel 2 4 Mounting and Installation Option 1: Flush Wall Mount Step 1 Step 2 Step 3 Paste the mount sheet on the wall Step 4 Step 5 Drill the four mounting holes Install the mounting plate using the four screws Step 6 Step 7 Screw M3*13 Screw M3*13 Screw of cover plate Screw of cover plate Plug in the required cables to the room panel Option 2: Mounting on Glass Step 1 Step 2 Attach the room panel to the mounting plate Lock the room panel to the mounting plate using a screw at each corner The room panel is ready to be brought online Step 3 Step 4 Paste sticker on the back of the mounting plate Ensure the glass surface is clean and dry The mount sheet can be temporary fixed on the other side of the glass to locate the area for the cover sheet. 1.Affix the cover sheet to the glass surface. 2.Align the mounting plate to the cover sheet with the kensington lock hole. Step 5 Step 6 Step 7 Step 8 Affix the mounting plate to the glass surface Screw M3*13 Screw M3*13 Cover sheet Screw of cover plate Screw of cover plate Plug in the required cables to the room panel Attach the room panel to the mounting plate Lock the room panel to the mounting plate using a screw at each corner The room panel is ready to be brought online Option 3: Mounting close to a window frame Step 1 Step 2 Step 3 Step 4 Window frame Window frame Window frame Align the mounting sheet guide parallel to the window frame Drill the four mounting holes Install the mounting plate using the four screws Plug in the required cables to the room panel Step 5 Window frame Step 6 Window frame Step 7 Window frame Screw M3*6 Screw M3*13 Screw of cover plate Attach the room panel to the mounting plate Lock the room panel using a screw at the top, and two screws at the outside corners The room panel is ready to be brought online To change room panel system language, select

(Current Language) .... rations, select Advanced.

configurations:

1 2 3 Set correct time, date, and time zone for properly scheduled playback. Set password to prevent unauthorized access during setup menu. Set network for establishing network connection. 5 Set content Users can set content by clicking "Set Content" to enter the URL or use the desired content manage-ment system to upload the contents onto the room panel. Content Management content management solution. Troubleshooting How do I interrupt playback and enter setup menu?

Use USB mouse to click and hold one corner of the screen for 10 seconds to exit playback and enter setup menu. How do I provide a DEBUG log for a misbehaving room panel to the support team?

Please follow the instructions below to collect the room panel's DEBUG log:

Prepare a blank USB stick in FAT-32 format. Create a folder named "DEBUG" (case insensitive) in the root of USB stick. Make sure the room panel is operating (see welcome screen or playing content). Insert the USB stick into room panel and wait for Within the "DEBUG" folder, is a folder with a string of number as its name. If the string of numbers are all zero's, the debug log has not been collected properly. Repeat step 1-4 again and make sure to wait

. 6 Zip the"DEBUG" folder and send to IAdea Support Team. Resetting room panel to factory default Factory resetting the room panel will result in the removal of all saved contents, to complete the room panel factory resetting process:

Use a pen to press and hold the reset button - do not release until Step 4. Insert the power cord. Wait 30 seconds for the system reboot indicating your data is erased. Release the reset button and your room panel will initialize in factory default state. IAD_DGS_WRP_10EP 1 2 3 4 5 1 2 3 4 CARE AND WARNING CAUTION Risk of explosion if the battery is replaced by an incorrect type Wait one-half hour after switching off before handling parts

- Replacement of a battery with an incorrect type that can be defeat a safeguard;

- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;

- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Room booking Mounting plate Glass mount Mounting guide panel sticker sheet Glass mount cover sheet Screw M3*13 Screw M3*6 Europe EU Declaration of Conformity Front View 261.7*181.6(mm) x 3 x 2

(1 Spare)

(1 Spare) IAD-18010 series Quick Start Guide Box Content This is a quick walkthrough of the set up process. For complete documentations and quick start guides, please visit http://support.IAdea.com. Port Connections 1 4 43 5 11 1 1 2 1 16 17 MicroSD ADB Audio USB Reset USB Ethernet DC Expansion Power LED 6 7 8 9 10 11 12 13 14 15 1 Screw Hole 2 Camera*

3 Microphone*

4 LED 5 NFC/RFID reader 6 MicroSD card slot 7 ADB 8 3.5mm audio 9 USB port 10 Reset 11 USB port 12 Ethernet RJ45 13 Power LED 14 12V DC power 15 Expansion*

16 Kensington Lock 17 VESA mount (MIS-D75) Screw spec: M4

* The functions marked with "*" only appear on certain models. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with the essential requirements of the Radio Equipment Directive

(2014/53/EU). The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the Radio Equipment Directive This equipment is compliant with Class A of EN55032. In a residential environment this equipment may cause radio interference. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. FCC & CE RF Radiation Exposure Statement Caution: To maintain compliance with the FCC & CEs RF exposure guidelines, place the product at least 20cm from near by persons. The suitable temperature for the Colour Monitor and sccessories is 0C-50C. Adaptor with ferrite must be used with this equipment to ensure compliance with the Class A FCC limits. Power Adapter information:

Model No.: WB-24J12R INPUT: 100-240V~50/60Hz OUTPUT: 12 2.0A Installation height :<2M company Name: IAdea Corporation Address: 3F, No. 21, Lane 168, Xingshan Road,Neihu Dist. Taipei, 114 Taiwan Tel: 886-2-2791-1110 Q41G78SP05904A

IAD18010H C=3mm Room Booking Panel WRP-1000-H Model No.:IAD-18010H Input:12V 2.0A USB output: 5V 500mA each FCC ID:Y9E-IAD18010H Made in China This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: do not disassemble. risk of electric shock if opened.

1 0 0 0 0 6 0 2 X X X X X X X 1. Rating label50#PET, 50%

markSN LABEL

IAdea Corporation 3F, No. 21, Lane 168, Xingshan Road, NeihuDist., Taipei City 11469, Taiwan, R.O.C. Tel : 886-2-2791-1110/ Fax: 886-2-2791-1170 Authority to Act as Agent Date: December 21, 2020 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

_AUDIX Technology(Shenzhen)Co.,Ltd. is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____10 months____ By:

Title:

On behalf of: IAdea Corporation __________________________ Yung-Tsai Wang

(Print name) Director of product development

(Signature1)

(Company Name) Telephone:

_+1-949-305-6489x200 102920 13

IAdea Corporation 3F, No. 21, Lane 168, Xingshan Road, Neihu Dist., Taipei City 11469, Taiwan, R.O.C. Tel : 886-2-2791-1110/ Fax: 886-2-2791-1170 Attestation Letter Date: Dec. 21, 2020 Federal Communications Commission Authorization and Evaluation Division FCC ID: Y9E-IAD18010H; Y9E-IAD18010A We, IAdea Corporation, declare that the device does not support channel 12 ~

13 in 2.4 GHz band and any non-US channels in all the operational mode(s) for the following product. Product: Room Booking Panel Model: IAD-18010H; IAD-18010A; IAD-18010L FCC ID: Y9E-IAD18010H; Y9E-IAD18010A If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Sincerely, __________________ Name: Yung-Tsai Wang Position: Director of product development IAdea Corporation Web site: www.iadea.com V1.0

IAdea Corporation 3F, No. 21, Lane 168, Xingshan Road, NeihuDist., Taipei City 11469, Taiwan, R.O.C. Tel : 886-2-2791-1110/ Fax: 886-2-2791-1170 Non-SDR (Software Defined Radio) Cover Letter Refer to KDB 442812 D01 SDR apps Guide v02r03. The following questions can be used for determining if a radio can elect to be, or must be an SDR. 1. Can the RF parameters of the device be altered through software?

2. Can third parties not permitted by the Commission through specific fillings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters (frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)?

Date: 2020/1/13 Yes go to 2. No, not an SDR. Yes, must be an SDR. No go to 3. Yes go to 4. No go to 5. 3. Is the device capable of operating in any other way than granted, or will be, granted?

4. Is this a Part 15 client Device as defined in Section 15.202 (as opposed to a master device)?

Yes, qualifies as a part 15 client devices go to 5. No, must be an SDR. 5. Does the manufacturer elect SDR?

Yes, elects to be an SDR. No, Not an SDR. Final conclusion: Not an SDR Name: Yung-Tsai Wang Position: Engineer IAdea Corporation According to the above questions reply, we can confirm this Room Booking Panel

(FCC ID: Y9E-IAD18010HY9E-IAD18010A) must be a Non-SDR.

IAdea Corporation 3F, No. 21, Lane 168, Xingshan Road, NeihuDist., Taipei City 11469, Taiwan, R.O.C. Tel : 886-2-2791-1110/ Fax: 886-2-2791-1170 Request for Confidentiality Date: December 21, 2020 Subject: Confidentiality Request for: _Y9E-IAD18010HY9E-IAD18010A Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *2 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual IAdea Corporation has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 30 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: ______ /Director of product development Yung-Tsai Wang

(Signature/Title3)

(Print name) 102920 13