U S E R M A N U A L XDS-2288 IAdea 22 Touch-Enabled Digital Door Sign for Smart Workplace Package content:
Smart signboard Power adapter Power cord IO cover 2 IAdea 22 Touch-Enabled Digital Meeting Room Door Sign HardwareCopyright 2018 IAdea all rights reserved Physical views and features:
3 IAdea 22 Touch-Enabled Digital Meeting Room Door Sign HardwareCopyright 2018 IAdea all rights reserved Installation:
Significant temperature deviations and changes in elevation or environment can lead the glass panel of the smart signboard to trap a slight amount of moisture. To avoid damaging the smart signboard, the condensation will re-
quire at least 2 - 4 hours to evaporate prior to usage. Important:
Operating the smart signboard with its back casing pressed down against a flat surface (eg. table top) increases the risk of overheating the smart sign-
board and decreases system performance. Users are recommended to keep the back casing clear of direct casing-
against-flat-surface contact when operating the smart signboard to allow proper air circulation and minimize overheating the system. Mounting with VESA compatible mounting interface This smart signboard accepts a MIS-D100 (100 mm x 100 mm) VESA-Compli-
ant mounting interface and the recommended screw is M4 x 6 mm excluding bracket thickness. Installing the optional display stand 1 Arrange the smart signboard with the screen pressed down against a clean cloth, for cushioning, on a still and flat surface. flat surface 4 IAdea 22 Touch-Enabled Digital Meeting Room Door Sign HardwareCopyright 2018 IAdea all rights reserved 2 3 Place the display stand on the mounting bracket and install the screws. Rotate the display stand to switch between portrait or landscape orientation. This method also works when the smart sign-
board is upright. Setting Up:
Plug in the AC adapter and Ethernet cable
(if that is the preferred method of con-
necting to network) located at the back of the smart signboard and it will power on automatically. Once the user has exited the boot up screen, users can go through system configurations in both landscape and portrait orientations. When boot up is complete, the user will see the Basic settings which allows the user to make configurations or autoplay pre-loaded content. Please note, the smart signboard is set to autoplay pre-loaded content 15 seconds after boot up. This can be canceled if Cancel autoplay in 15s is selected which lets the user remain on the Basic settings and initiate playback manually. 1 2 5 IAdea 22 Touch-Enabled Digital Meeting Room Door Sign HardwareCopyright 2018 IAdea all rights reserved 3 4 To change smart signboard system lan-
guage, select (Current Language) .... For system configurations, select Ad-
vanced. Important recommended configurations:
1) Set correct time, date, and time zone for properly scheduled playback. 2) Set password to prevent unauthorized access during setup menu. 3) Set network for establishing network connection. Once the smart signboard has completed all the recommended configurations, com-
plete the last boot up process and your smart signboard is ready for the pre-load-
ed content management system. Reset smart signboard to factory default Use a pen to press and hold the reset button - do not release until Step 4. Insert the power cord. Wait 30 seconds for the system reboot indicating your data is erased. Release the reset button and your smart signboard will initialize in facto-
ry default state. 1 2 3 4 6 IAdea 22 Touch-Enabled Digital Meeting Room Door Sign HardwareCopyright 2018 IAdea all rights reserved Technical Specification:
Display Internal Player Video Format Supported Image Format Supported Audio Format Supported Open Standards Supported Interactivity 21.5 IPS LCD panel 10 points capacitive multi-touch 250 nits maximum brightness 1920 x 1080 (Full HD) panel resolution Viewing angle (H/V): 178/178 Processor: Cortex-A17 1.8 GHz Quad-Core System memory: 2.0 GB Flash memory: 8 GB eMMC built-in H.264/AVC up to 1080p (1920 x 1080) H.265/AVC up to 1080p (1920 x 1080) MPEG-4 up to 1080p (1920 x 1080) MPEG-2 up to 1080p (1920 x 1080) MPEG-1 up to 1080p (1920 x 1080) VC-1 up to 1080p (1920 x 1080) JPEG up to 1920 x 1080 PNG up to 1920 x 1080 MP3 up to 320 Kbps W3C HTML5 (HTML, JavaScript, CSS) W3C SMIL 3.0 instructions (sub-set) GPIO via PIO-101 module (optional) 7 IAdea 22 Touch-Enabled Digital Meeting Room Door Sign HardwareCopyright 2018 IAdea all rights reserved SD card slot (expendable to 64 GB) Mini USB for ADB (Android Debug Bridge) 3.5 mm audio out USB ports x 3 Ethernet port x 1 Power jack Embedded wireless antenna Built-in stereo speaker 2 W x 2 Power adapter, power cord, IO bracket, quick guide Adjustable table stand Input: AC 100 - 240 V, 50 - 60 Hz, 1.5 A max Output: 12 V / 3 A UL/CB certified power supplies 21 W Connectivity Supplied Accessories Optional Accessories Power Requirement Power consumption Environmental Sytem Dimension System Weight Certifications Warranty Operating temperature: 0 40 C / 32 104 F Humidity: 10 85 % @ 45 C / 113 F non-condensing 538 mm x 331 mm x 37 mm (21.18" x 13.03" x 1.46") 3.6 kg (7.934 lbs) CE / FCC / RoHS 1-year limited parts & labor (varies based on region, contact sales for more details) 8 IAdea 22 Touch-Enabled Digital Meeting Room Door Sign HardwareCopyright 2018 IAdea all rights reserved Proof of certificate This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con-
ditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ-
ment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IAdea Headquarters 3F, No.21, Lane 168, Xiangshan Road Taipei, Taiwan 114 Phone: +886-2-2791-1110 Fax: +886-2-2791-1170 Email: sales@IAdea.com IAdea America Corp. 20 Fairbanks, suite 170 Irvine, CA 92618 USA Phone: +1-949-305-6489 Email: us-sales@IAdea.com