FCC ID: 2AWD8S2000 TPMS S2000

w w w . i c a r s o f t . u s English Safety Instructions Any maintenance and repair work must be carried out by trained experts. Failure to do so may result in the failure of the TPMS sensor. iCarsoft does not assume any liability in case of faulty or incorrect installation of the unit. Components & Controls Cap Valve core assembly iCarsoft TPMS S2000 Quick Start Guide S2000 IMPORTANT: Read these instructions carefully and use this unit properly before operating. Failure to do so may cause damage and/or personal injury and will void the product warranty. CAUTION When mounting/dismounting the wheel, follow the operation guideline of wheel changer manufacturer strictly. Sensor body Screw Do not race with the vehicle on which the LTR-01 RF sensor is mounted, and always keep the drive speed under 240km/h. To guarantee optimal performance, the sensors may only be installed with original valves and accessories provided by iCarsoft. Make sure to program the sensors using iCarsoft-specific TPMS tool prior to installation. Do not install programmed TPMS sensors in damaged wheels. After installing the TPMS sensor, test the vehicles TPMS following the steps described in the original manufacturers user manual to confirm proper installation. Technical Parameters Weight 29g Dimension(L*W*H) About 77.5*40*15mm IP Rating IP67 When replacing or servicing the sensor, please only use the original valves and accessories provided by iCarsoft to ensure proper sealing. It is mandatory to replace the sensor if it is externally damage. Always remember to tighten the nut to the correct torque of 4Nm. Installation Steps 1. Loosening the tire Remove the valve cap and nut and deflate the tire. Use the bead loosener to break the tire bead. Caution: The bead loosener must be facing the valve. 3. Dismounting the sensor 5. Remounting the tire Remove the cap and nut from the valve stem, and then remove the sensor assembly. 4. Mounting the sensor and throttle Step 1. Remove the cap and nut from the valve stem. Place the tire on the rim, ensure that the valve starts on the opposite side of the rim from the tire fitting head. Mount the tire over the rim. Caution: Strictly follow tire changer manufacturers instructions to mount the tire. 2. Dismounting the tire Clamp the tire on the tire changer, and adjust the valve at 1 oclock to the tire fitting head. Use the tire tool to dismount the tire bead. Caution: Always observe this starting point during the whole dismounting process. Step 2. Place the valve stem through the valve hole of the rim, ensuring the sensor body located on the inside of the rim. Assemble the nut back on the valve stem with a torque of 4Nm, then tighten the cap. Caution: Make sure that the nut and cap are installed on the outside of the rim. Warranty The sensor is guaranteed to be free from material and manufacturing defects for a period of twenty-four (24) months or for 31000 miles, whichever comes first. This warranty covers any defects in materials or workmanship under normal use during the warranty period. Excluded from the warranty are defects due to improper installation and usage, induction of defect by other products, damage due to collision or tire failure. 6. FCC Statement 7. IC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body This device may not cause interference; and This device must accept any interference, including This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1)

(2) interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment should be installed and operated with a minimum distance of 20 centimetersbetween the radiator and your body. Cet quipement doit tre install et utilis une distance minimale de 20 centimtres entre leradiateur et votre corps.

Icarsoft Technology Inc. Section 2.911(d)(7) USA Agent for Service of Process Company name: Icarsoft Technology Inc. Address: 1629 K St. Suite 300 N.W., Washington D.C., Dist of Columbia 20006, United States Product Name: TPMS $2000 FCC ID: 2AWD8S2000 Model(s): S2000 2.911(d)(7) USA Designated Agent for Service of Process We, [Icarsoft Technology Inc.] (the applicant) designate [Icarsoft Technology Inc.]T=" for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We acknowledgeour consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledgeour acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We acknowledgeourobligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email addressfor no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: Icarsoft Technology Inc. Company name: Icarsoft Technology Inc. USA Address: 1629 K St. Suite 300 N.W., Address: 1629 K St. Suite 300 N.W., Washington D.C:, Dist of Columbia 20006, Washington D.C., Dist of Columbia 20006, United States United States FRN Number: 0029567583 > FCC Grantee Code: 2AWD8 Contact Name: Cynthia Brook Contact Name: Cynthia Brook Telephone No: 001 (703) 890-6001 Telephone No: 001 (703) 890-6001

~ Email: magic@icarsoft.us Email: magic@icarsoft.us

(inthe brook Signature: Cyn he pvt Title: manager Title: manager Date: 2023-03-01 Date: 2023-03-01 2.911 (d)(7)USA Agent v1.4 FRN Number: 0029567583

Icarsoft Technology Inc. Section 2.911(d)(5)(1) Certification EquipmentType Company name: Icarsoft Technology Inc. Address: 1629 K St. Suite 300 N.W., Washington D.C., Dist of Columbia 20006, United States Product Name: TPMS $2000 FCC ID: 2AWD8S2000 Model(s): S2000 2.911(d)(5)(i) EquipmentType We, [Icarsoft Technology Inc. (the applicant) certify that the equipment for which authorization is sought through certification is not:

e Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. e Identified as an equipment type in the Covered ListNT=

Yours sincerely, (yo _ pe Name: Cynthia Brook Date: 2023-02-21 Title and Company name: manager/Icarsoft Technology Inc. NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at httos://www.fec.gov/supplychain/coveredlist References;

1) 986446 DO1 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https:/Awww.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Icarsoft Technology Inc. Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Icarsoft Technology Inc. Address: 1629 K St. Suite 300 N.W., Washington D.C., Dist of Columbia 20006, United States Product Name: TPMS S2000 FCC ID: 2AWD8S2000 Model(s): S2000 2.911(d)(5)(ii) Applicant filing We, [Icarsoft Technology Inc.] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified'= on the Covered ListN'? established pursuant to 1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, uy Ws bos f-

Name: Cynthia Brook Date: 2023-02-21 Title and Company name: manager/Icarsoft Technology Inc. NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https:/www.fec.gov/supplychain/coveredilist References;

1) 986446 DO1 Covered Equipment v01 https://apps fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https:/www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Icarsoft Technology Inc. Agent Authorization Company: Icarsoft Technology Inc. Address: 1629 K St. Suite 300 N.W, Washington D.C., Dist of Columbia, 20006, United States Product Name: TPMS S2000 Model Number(s): S2000 Product Description: TPMS S2000 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Cynthia Brook Title:

manager Company:

Icarsoft Technology Inc. Date: 2023-02-21

THINKCAR TECH CO., LTD. Date:Feb 21, 2023 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Subject:

Authorization of Change in Identification Reference FCC ID: 2AUARS2 Dear Sir/Madam, This letter grants authorization for representatives of Icarsoft Technology Inc. to apply to the FCC for a change in identification as specified under CFR Title 472.933(b) of the FCC rules. This authorization applies to THINKCAR TECH CO., LTD. with THINKTPMS S2 and FCC ID: 2AUARS2 . We are aware that Icarsoft Technology Inc. intends to market the above referenced product under their own FCC ID. Sincerely, Signature:

Name: Jinyuan Tang Title: Manager Company: THINKCAR TECH CO., LTD.

Icarsoft Technology Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-02-21 Subject; Request for Long Term Confidentiality FCC ID: 2AWD8S2000 To Whom It May Concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market.

[>x]Schematic Diagram

(XJBlock Diagram

[_|Parts List

[x]Operational Description

[_]Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Cythee brvelp. Name: Cynthia Brook Signature:

Title: manager

Icarsoft Technology Inc. Date: 2023-02-21 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Request for 2.933 Change in identification of equipment Reference: FCC ID: 2AWD8S2000 Dear Sir/Madam, Icarsoft Technology Inc. requests a Change in Identification for a currently approved device. This application will establish a new FCC ID for purpose of marketing. The original Grant for 2AUAR,under FCC ID: 2AUARS2 with a Grant Date of 07/15/2022 will remain in effect.An authorization letter from the original Grantee is attached. We attest that the equipment is electrically identical. Only Product Name, model name, trade name, appearance photo and FCC ID are different.The original test results are applicable and continue to be representative of this device. The following files are provided as attachments:

e Cover letter giving permission from original Applicant for Change in ID e External photos showing no physical changes to this device e New FCC identification label and its location. Thanks and Best Regards, Name: Cynthia Brook Signature: ohn ws t Company Name: Icarsoft Technology Inc. Address: 1629 K St. Suite 300 N.W, Washington D.C., Dist of Columbia, 20006, United States Tel / Fax: 001 (703) 890-6001/001 (703) 890- 6001 E-Mail: magic@icarsoft.us