TP001 TPMS Tire pressure monitoring system Manual Index:
1.Notice of usage 2.Specification 3.Installation of battery 4.QR code sticker 5.App installation & device installation 6.Error code & status 7.Program pause 8.Notice 9.Warranty Package includes :
1.TPMS set (including sensor/ CR2032 battery/ bolt)
- 4 sensors for car version
- 2 sensors for motorcycle version
- single sensor package CR2032 3V 2.Wrench*1 1.Notice of usage Reminder:
1.Using chemical sealing system inside the tire could lead to TPMS malfunction. 2.Regularly check tire valve & external treads to make sure they work properly, as TPMS is only an optional safety equipment. 3.TPMS wireless signals could be lost by interference,wrongly operation and installation could also lead to signal loss. 4.Proper tire pressure and good maintenance will save your gasoline consumption and a safe journey. 2.Specification Dimension:
Width:24.4mm* Height:22.68mm 7.5g0.2g(per sensor) Weight:
Transmission distance: 10~30m line of sight Operation temp: -20~85 Tir pressure range: 0 KPa~800KPa Battery: CR-2032 (3.0V) Max power consumption: 107A Transmission interface: Bluetooth BT 4.0 (BLE) RF 2.4-GHz/Bluetooth/Low Energy Compliant Output Power0dBm 3.Installation of battery 1.Open the lid counter-clockwise. 2.Insert CR2032 battery with +
facing up. 3.lose the lid clock-wise 4.Finish Notice:
Please only use CR2032 battery for battery swap. Wrong battery could lead to malfunction and damage. 4.QR code sticker QR code sticker is included inside the package, please do not lost it. QR code sticker number should match with TPMS sensor number
, please pair the sensors by order on your phone app. QR Code 1 1 5.App & TPMS installation & usage 5-1.APP download A.Please search nAve TPMS, and installation for free. B.Open the app, the app ca be used with your phone eit-
her vertically or horizontally. nAve TPMS nAve TPMS 15.0.1 5-2.App setup Click for setting A.Choose your language: Japanese, English,Chinese (sim-
plified), Chinese (traditional) B.B.Choose always-on mode, then the app will always on. C.Turn on alarm overwrite mode, system alarm sound will function even in phone silent mode. Adjust the vol-
ume to 50%~100%. Vehicle selection back Set Up Language English Auto-Lock Forced Alert Instructions 5-3.Build up new vehicle info Press enter vehicle info A.Press picture area to choose picture from database or to take a photo. B.Name your vehicle by pressing name area C.Choose vehicle spec, then press finish. D.To redo or edit, press the picture 3 secs. Back Vehicle selection My Car My Car Type Selection 4 wheel 2 wheel 2 front wheel / 1 rear wheel 1 front wheel / 2 rear wheel Select Edit / Delete Vehicle data My Motor Edit Delete Photo My Car 2 OK Instructions 5-4.Pairing the sensor Pairing the sensor on your App, please follow serial number and pair in order. A.Press 3 sec for pairing mode. B.Scan QR code with your phone for pairing, or enter the serial number below QR code for pairing. Back Back Back Scan QR code camra on Enter QR code
(L)Front Tire1
(R)Front Tire2 Touch 3 seconds Touch 3 seconds to connect to connect setting
(L)Rear Tire3
(R)Rear Tire4 Touch 3 seconds Touch 3 seconds to connect to connect setting 5-5.Installation of sensors 1.Lock the bolt onto the valve clock-wise. 2.Lock the sensor (with battery ) onto the valve clock-wise. 3.Use wrench to fasten the bot counter clock-wise
, so the sensor & bolt will lock tightly. 4.Finish, then apply soap water on the sensor to see if leaking. 5-6.Tire pressure setup Press setup button to setup tire pressure. Follow the suggested tire pressure range form tire com-
pany, tire pressure range can be set up automaticallyor manually. Back My Car Monitoring... Stop Back
(L)Front Tire1
(R)Front Tire2 setting Pressure Unit Standard pressure Pressure Max Pressure Min Psi 42 34 30
(L)Rear Tire3
(R)Rear Tire4 Temperature Unit Temperature Max 70 setting OK 6.Error code A.Wrong tire pressure Too low or too high, the background color will turn red + alarm sound B. Wrong tire temperature Too low or too high, the background color will turn red + alarm sound C. Sensor malfunction:
1.Please check if the sensor is missing 2.Please re-pair, choose then a gain or scan QR code to re-pair. 3.If the sensor is mail-functional, please contact your dealer. connect pause Back My Car Monitoring... Stop Back My Car Monitoring... Stop Back My Car Monitoring... Stop
(L)Front Tire1
(R)Front Tire2
(L)Front Tire1
(R)Front Tire2
(L)Front Tire1
(R)Front Tire2 setting Alarm setting Alarm Loss of signal connecting... setting Alarm
(L)Rear Tire3
(R)Rear Tire4
(L)Rear Tire3
(R)Rear Tire4
(L)Rear Tire3
(R)Rear Tire4 setting setting setting Please Check Tire !
Please Check Tire !
Please Check Tire !
7.Program pause 1.Press button on right top of your app screen to pause. 2.Press button again on right top to resume. connect pause Back My Car Monitoring... StopStop Back My Car Monitoring... Connect
(L)Front Tire1
(R)Front Tire2
(L)Front Tire1
(R)Front Tire2 setting setting Stop
(L)Rear Tire3
(R)Rear Tire4
(L)Rear Tire3
(R)Rear Tire4 setting setting 8.Notice 1.TPMS cannot guarantee the safety of your trip, please check your tire regularly. 2.Please pull over whenever you sees/hears alarm. 3.TPMS cannot detect any instant tire damage from outside environm-
ent. 4. Do not operate TPMS and drive at the same time. 5.Sensor battery life varies by battery quality and usage. 6.please only use CR2032 battery for battery swap. Wrong battery cou-
ld lead to malfunction and damage. 7.Recycle the dead battery 8.Battery power shortens by regular usage and battery life could also s-
horten under -20C environment. 9.Sensor could not be working if battery voltage is too low, please cha-
nge batteries. 10.Tire pressure varies when temperature inside/outside the tire varies. 11.Please park your vehicle properly to avoid any damage/lost to TPMS. 12.TPMS device is IP67 certified, but please do not soak the sensor into water or chemicals for a long time. 13.Please consult tire vendor or professionals for related tire index. 9.Warranty Thank you for purchasing this device, we provide limited one year wa-
rranty upon your purchase date, please do not lost your QR coe sticker
, warranty card. Below conditions are not within our warranty:
1.Product damaged by nature cause 2.Product damaged by miss-use 3.Product damaged by not following the manual instruction 4.Product failure not caused by product 5.Use non-original parts. 6.Product failure by battery out. Disclaimer:
This TPMS device is only an optional accessory, any car accidents by dri-
ver behavior or by damaged tire is not a responsibility to the manufact-
urer. NCC NCC
(European Union Regulatory Conformance) CE R&TTE Directive 1999/5/EC EN 300 328EN62479EN 301 489-1&17EN 60950-1
(EUDeclaration of Conformity ) Salutica Allied Solutions Sdn. Bhd. 1999/5/EC FCC FCC Compliance and Advisory Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
1. Reorient the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. Any special accessories needed for compliance must be specified in the instruction manual. Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. CAUSION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.