ABOUT THE COMMAND MIC FCC INFORMATION PRCAUTIONS INSTRUCTIONS COMMAND MICROPHONE FOR
|F5330D
|F6330D Thank you for choosing this Icom product. READ ALL INSTRUCTIONS carefully and completely before using this product. The Command Mic comes with internal Bluetooth module, and is supplied microphone for IC-F5330D, IC-F6330D or developing radios in the future. NOTE: When you remotely operate the transceiver by using a mobile device or Bluetooth Low Energy device, BE SURE to check your local regulations. ELECTROMAGNETIC INTERFERENCE When you use a Bluetooth device, pay attention to following:
Bluetooth devices operate on the 2.4 GHz band. The 2.4 GHz band is also used by other devices, such as wireless LAN products, microwave ovens, RFID systems, amateur radio stations, and so on. When using a transceiver with the Bluetooth unit installed and turned ON near such devices, interference may occur, causing a decrease in communication speed, and an unstable connection. In such cases, use the transceiver with the Bluetooth unit away from the other devices, or stop using those devices. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. CAUTION: Changes or modifications to this transceiver, not expressly approved by Icom Inc., could void your authority to operate this transceiver under FCC regulations. EXPLICIT DEFINITIONS WORD DEFINITION Internal Bluetooth unit information:
FCC ID:
IC:
AFJ387300 202D-387300 R DANGER! Personal death, serious injury or an explosion may occur. R WARNING! Personal injury, fire hazard or electric CAUTION NOTE shock may occur. Equipment damage may occur. If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. SPECIFICATIONS Bluetooth version:
Transmission Output:
Supported profiles:
The maximum number of paired Bluetooth devices:
Dimensions:
PRECAUTIONS IMPORTANT: The Bluetooth communication range may vary, depending on your operating environment. Microwave ovens or Wireless LANs may cause interference. In that case, stop using those devices or move away from them. This Bluetooth device has a usable range. If communication is unstable, move within the range. R DANGER! NEVER use a device with the Bluetooth unit installed and turned ON near medical equipment, or near a person who has a pacemaker. Radio waves from the device may cause interference, or endanger their life. CAUTION: DO NOT use a device with the Bluetooth unit installed and turned ON near microwave ovens. Interference may occur. CAUTION: DO NOT make any changes or modifications to the device. NOTE: You may not be able to use some Bluetooth devices function, even if the unit is installed. Icom is not responsible for the destruction, damage to, or performance of any Icom or non-Icom equipment, if the malfunction is because of:
Force majeure, including, but not limited to, fires, earthquakes, storms, floods, lightning, other natural disasters, disturbances, riots, war, or radioactive contamination. The use of Icom products with any equipment that is not manufactured or approved by Icom. Icom and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand and/or other countries. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Icom Inc. is under license. Other trademarks and trade names are those of their respective owners. All other products or brands are registered trademarks or trademarks of their respective holders. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan May 2023 A7758-2EX Printed in Japan 2023 Icom Inc. 5.3 Class 1 HFP, HSP, SPP, GATT
(Serial) over LE 7 devices*
134.8(H) x 60.8(W) x 35.5(D) mm Approximately 250 g Dimensions:
* Either headsets or mobile devices are maximum 4 devices, and the combination is 5 devices in total.
* Bluetooth Low Energy devices are maximum 2 devices. L The specifications are subject to change without notice or obligations. FRANAIS DFINITIONS EXPLICITES TERME DFINITION R DANGER !
R AVERTISSEMENT !
MISE EN GARDE REMARQUE Risque daccident mortel, de blessures corporelles graves ou dexplosion. Risque de blessures corporelles, dincendie ou de choc lectrique. Risque de dgt matriel. La non prise en compte peut entraner des dsagrments. Absence de risque de blessures corporelles, dincendie ou de choc lectrique. IMPORTANT: La porte de communication en Bluetooth peut varier en fonction de lenvironnement dans lequel lappareil fonctionne. Les fours micro-ondes ou les rseaux daccs local sans fil peuvent causer des interfrences. Dans ce cas, arrtez dutiliser ces appareils ou loignez-vous deux. Ce priphrique Bluetooth dispose dune zone de porte utilisable. Si la communication est instable, dplacez-vous dans cette zone. R DANGER! Nutilisez JAMAIS un appareil avec lunit Bluetooth installe et allume proximit dun quipement mdical ou dune personne portant un stimulateur cardiaque. Les ondes radio mises par lappareil peuvent provoquer des interfrences ou mettre la vie en danger. MISE EN GARDE : NE PAS un appareil avec lunit Bluetooth installe et allume proximit de fours micro-
ondes. Des interfrences peuvent se produire. MISE EN GARDE : NE PAS changement ou modification lappareil. REMARQUE: Il se peut que vous ne puissiez pas utiliser la fonction de certains appareils Bluetooth mme si lappareil est install. INFORMATION FCC Cet quipement a t test et reconnu conforme aux limites fixes pour un appareil numrique de classe A, conformment au point 15 de la rglementation FCC. Ces limites assurent une protection raisonnable contre les interfrences nuisibles lorsque lquipement est utilis dans un environnement commercial. Cet quipement gnre une nergie de radio frquence, utilise et rayonner et sil nest pas install et utilis conformment au manuel dinstruction, peut causer des interfrences nuisibles aux communications radio. Le fonctionnement de cet quipement dans une zone rsidentielle est susceptible de causer des interfrences nuisibles lorsque lutilisateur doit corriger les interfrences ses propres frais. Cet appareil respecte les conditions tablies au paragraphe 15 des rgles de la FCC. Son utilisation est assujettie la condition de ne pas provoquer des interfrences nuisibles. MISE EN GARDE: Tout changement ou modification, non expressment approuv par Icom Inc., peut annuler lautorisation de lutilisateur utiliser cet appareil conformment la rglementation FCC. Informations sur lunit Bluetooth interne:
( Uniquement pour lmetteur-rcepteur avec la fonction Bluetooth) ID FCC:
IC:
AFJ387300 202D-387300 PANEL DESCRIPTION FUNCTION DISPLAY BASIC OPERATION D Microphone
[Emer]*
Power key [
Microphone
[PTT]
[P1]*
[F1]*
Vol Up [+]*
Vol Down []*
[P3]*
Speaker Status indicator
[Up]/[Down]/
[Right]/[Left]*
[P2]*
[P4]*
Ten-Keypad
* The assigned function may differ, depending on the presetting. Ask your dealer or the transceivers administrator for details. Status indicator:
Lights red:
Transmitting Lights green: Receiving or squelch is open. 1 2 3 1 ICON AREA Displays the icons, as shown below. D Turning ON the transceiver z Hold down [
] for more than 2 seconds until the Status indicator or Power indicator lights orange. NOTE: Entering the password may be required to turn ON the transceiver, depending on the presetting. Ask your dealer or the transceivers administrator for details. D Receiving 1. Push [Up] or [Down] to select a channel. 2. When a call is received, the Status indicator lights green. L Push [+] or [] to adjust the audio output level to a comfortable listening level. Displays the relative receive signal strength level. D Transmitting CAUTION: DO NOT transmit without an antenna. 1. Wait until the channel is clear to avoid interference. 2. While holding down [PTT], speak at your normal voice level. 3. Release [PTT] to receive. IMPORTANT:
To maximize the readability of your signal:
1. After pushing [PTT], pause briefly before you start speaking. 2. Hold the microphone 5 ~ 10 cm (2 ~ 4 inches) from your mouth, then speak at your normal voice level. Displayed when the low output power is selected. Displayed when the Shift function is ON. The user can use a Dealer Assignable keys secondary function in the Shift mode. Ask your dealer for details. Displayed when the channel is in the audible
(unmuted) mode. Blinks after messages (Message or Status Message) have been received. Displayed when a matching signal is received, depending on the presetting. Blinks when the Bluetooth function is ON. Displayed when the transceiver is paired with a Bluetooth device. Blinks while scanning. Displayed when a scan is paused. Displayed when the channel is selected as a scan target channel. Displayed when the Encryption function is ON. Blinks when decoding an encrypted signal. Displayed when valid position data is received. Blinks when searching for satellites. Displayed when the Talk Around function is ON. Displayed when the Lone Worker function is ON. 2 ALPHANUMERIC READOUT Displays messages such as channel text. 3 DEALER ASSIGNABLE KEY ICONS Displayed while the function assigned to [P1], [P2],
[P3], or [P4] is operating. L May not be displayed, depending on the assigned function.