FCC ID: AFJ438900 Scanning Receiver

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6600691.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case BASIC MANUALThis device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.VHF/UHF TRANSCEIVERID-50AID-50EWARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. Thank you for choosing this Icom product. This product is designed and built with Icoms state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. This product combines traditional analog technologies with Digital Smart Technologies for Amateur Radio (D-STAR), for a balanced package. Important READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This instruction manual contains basic operating instructions for the ID-50A/ID-50E. For advanced operating instructions, see the Advanced manual for details. The Advanced manual can be downloaded from the following internet address:

https://www.icomjapan.com/support/

Features z D-STAR operation: The ID-50A/ID-50E has the D-STAR Repeater (DR) function. z The Dualwatch function can simultaneously receive two different bands or modes. z A built-in GPS receiver to check your current location. z The Voice recorder records your QSO conversation, voice audio for TX, and microphone voice audio. z A microSD card slot that can accept different cards to backup settings, various memories, the GPS log, and so on. z A USB connector for data transmission or battery charging. z The waterfall display of the Band Scope function to display signal strengths over time. Explicit definitions WORD RDANGER!

RWARNING!

DEFINITION Personal death, serious injury or an explosion may occur. Personal injury, fire hazard or electric shock may occur. CAUTION Equipment damage may occur. NOTE If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. Icom is not responsible for the destruction, damage to, or performance of any Icom or non-Icom equipment, if the malfunction is because of:

Force majeure, including, but not limited to, fires, earthquakes, storms, floods, lightning, or other natural disasters, disturbances, riots, war, or radioactive contamination. The use of Icom transceivers with any equipment that is not manufactured or approved by Icom. About weld lines This products surfaces may have streaks called weld lines, that occur during the molding process, and are not cracks or flaws. i BASIC MANUAL Supplied Accessories Antenna Hand strap Battery pack Belt clip NOTE: Some accessories are not supplied, or the shape is different, depending on the transceiver version. FCC information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications to this device, not expressly approved by Icom Inc., could void your authority to operate this device under FCC regulations. For Canada:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada (ISED)s licence-

exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area. About CE and DOC Hereby, Icom Inc. declares that the versions of ID-50E which have the CE symbol on the product, comply with the essential requirements of the Radio Equipment Directive, 2014/53/EU, and the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive, 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.icomjapan.com/support/

ii BASIC MANUAL174101518281351116391461217 About UKCA DOC To obtain the UKCA Declaration of Conformity, please search for your product at https://icomuk.co.uk, or alternatively call + 44 (0) 1227 741741 or email info@icomuk.co.uk. About the ID-50A/ID-50E manuals You can use the following manuals to understand and operate this transceiver.

(As of April 2023) TIP: You can download each manual and guide from the Icom website:

https://www.icomjapan.com/support/

Enter ID-50A or ID-50E into the Search box on the site. Basic manual (This manual) Instructions for basic operations and precautions. Advanced manual (PDF type) Instructions for the advanced operations, as shown below. Using a microSD card Battery operation FM Radio operation D-STAR operation GPS operation Voice TX operation Voice recorder operation Memory operation Scan operation Repeater and duplex operations Set mode Other functions Firmware updating Options Updating the repeater list (PDF type) Instructions for the steps to update the repeater list. Using the GPS Logger function (PDF type) Instructions for operating the GPS Logger function, that saves location data from a GPS receiver onto a microSD card as a log. About the DV Gateway function (PDF type) Instructions for the system requirements or operations to use the DV Gateway function. CI-V Reference Guide (PDF type) Describes the control commands used in remote control operation (serial communication using CI-V). L If necessary, you can see a glossary of HAM radio terms that can be downloaded from the Icom website. L To read the manuals or Guide, Adobe Acrobat Reader is required. If you have not installed it, please download the Adobe Acrobat Reader and install it on your PC. You can download it from Adobe Systems Incorporateds website. iii BASIC MANUAL Important Notes D When using the GPS receiver GPS signals cannot pass through metal objects. When using the transceiver inside a vehicle, you may not receive GPS signals. We recommend you use it near a window. The Global Positioning System (GPS) is built and operated by the U.S. Department of Defense. The Department is responsible for accuracy and maintenance of the system. Any changes by the Department may affect the accuracy and function of the GPS system. The GPS receiver is installed under the transceivers top panel. Therefore, when the GPS receiver is activated, do not cover the top with anything that will block the satellite signals. The GPS receiver is installed here. The GPS receiver may not work if used in the following locations:

- Tunnels or high-rise buildings

- Underground parking lots

- Under a bridge or viaduct

- In remote forested areas

- Under bad weather conditions (rainy or cloudy day) The GPS receiver may not work if the transceiver operates near 467.090 MHz on the A band, or 468.000 MHz on the B band. This is due to signals made in the internal circuit, and does not indicate a transceiver malfunction. D Spurious signals Using the Dualwatch function, or monitoring the broadcast FM radio band while using the Dualwatch function, may generate certain spurious signals, or noise may be heard, depending on the combination of the operating band and mode. These do not indicate a transceiver malfunction. D About charging with the power ON When the battery pack is attached, and the optional CP-12L or OPC-254L external DC power cable is connected to [DC IN], the battery pack can be charged even if the transceiver is ON. This operation may generate certain spurious signals, and the S-meter may appear, or noise may be heard. NOTE:

The charging time with the power ON may differ, depending on the operating condition. The external DC power supply voltage must be between 10 ~ 16 V, and the current capacity must be more than 2.5 A to charge the battery pack with the power ON. When you operate the transceiver while charging, and if you cannot receive signals correctly, set Charging (Power ON)* to OFF.

* [MENU] > SET > Function > Charging (Power ON) (Default: ON) iv BASIC MANUAL174101518281351116391461217 Unique functions This section introduces unique functions built into the ID-50A/ID-50E. L See the Advanced manual or About the DV Gateway function that can be downloaded from the Icom website for more details. 1 DV Gateway function Even if you cannot access a D-STAR repeater, you can make a direct Gateway call through the Internet. NOTE:

A Global IP connection is necessary for your Windows or Android device. Download and install the RS-MS3W or RS-MS3A application software from the Icom website or Google Play. See About the DV Gateway function that can be downloaded from the Icom website for details. Terminal mode The Terminal mode enables you to make a direct Gateway call through the Internet using a USB cable and a Windows or Android device. INTERNET INTERNET Access Point mode The Access Point mode enables a D-STAR transceiver to make a Gateway call through an ID-50A/ID-50E using a USB cable and a Windows or Android device. IMPORTANT: Before you set up an access point, check any regulations or laws in your country. INTERNET INTERNET v BASIC MANUAL 2 Share Pictures function You can send a picture that is saved onto a microSD card, or receive a picture using the optional ST-ID50A application. L A microSD card (user supplied) is required to use the function.

(Advanced manual) 3 Auto Position Reply function When you receive a call addressed to your own call sign, but are in a situation that makes it diffi cult to operate the transceiver, this function automatically replies with your own call sign and transmits your position data.

(Advanced manual) 2 Your position is automatically transmitted. 3 After receiving, the screen shows your position data. 1 A call addressed to your own call sign. Your station Destination

(ID-50A/ID-50E) 4 Near Repeater (DV/FM) search function You can select nearby repeaters using the DR function. The function can fi nd only repeaters that are in your transceivers repeater list.

(Advanced manual) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 L A U N A M C S A B I vi Voice Coding Technology The AMBE+2 voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to extract, remove, decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. U.S. Patent Nos.

#8,359,197, #7,970,606, #6,912,495 B2. Trademarks Icom and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries. Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. AMBE+2 is a trademark and property of Digital Voice Systems Inc. All other products or brands are registered trademarks or trademarks of their respective holders. This product includes mbed TLS open source software, and is licensed according to the open source software license. Refer to the About the Licenses page at the end of the manual in English for information on the open source software being used in this product. Precautions R DANGER! NEVER operate the transceiver near unshielded electrical blasting caps or in an explosive atmosphere. This could cause an explosion and death. R DANGER! NEVER use Icom battery packs with non-Icom transceivers. Only Icom battery packs are tested and approved for use with Icom transceivers. Using third-party or counterfeit battery packs may cause smoke, fire, or cause the battery to burst. R WARNING RF EXPOSURE! This transceiver emits Radio Frequency

(RF) energy. Extreme caution should be observed when operating this transceiver. If you have any questions regarding RF exposure and safety standards, please refer to the Federal Communications Commission Office of Engineering and Technologys report on Evaluating Compliance with FCC Guidelines for Human Radio Frequency Electromagnetic Fields (OET Bulletin 65). R WARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. R WARNING! NEVER operate or touch the transceiver with wet hands. This could cause an electric shock or damage the transceiver. R WARNING! NEVER operate the transceiver with earphones, a headset, or other audio accessories at high volume levels. If you experience a ringing in your ears, reduce the volume or discontinue use. R WARNING! NEVER connect the transceiver to a power source of more than 16 V DC or use reverse polarity. This could cause a fire or damage the transceiver. vii BASIC MANUAL BE CAREFUL! The transceiver meets IPX7* requirements for waterproof protection. However, once the transceiver has been dropped, or the waterproof seal is cracked or damaged, the waterproof protection cannot be guaranteed because of possible damage to the transceivers case or waterproof seal.

* Only when the BP-271, BP-272, or BP-307

(option), flexible antenna, [MIC/SP] cover,

[USB/DC IN] cover, and [microSD] slot cover are attached. NOTE: When the BP-273 is attachted to the transceiver, it meets IPX4 requirements for splash resistance. When it is connected, the transceiver corresponds to IPX4. Even when the transceiver power is OFF, a slight current still flows in the circuits. Remove the battery pack or batteries from the transceiver when not using it for a long time. Otherwise, the installed battery pack or batteries will become exhausted and will need to be recharged or replaced. CAUTION: DO NOT short the terminals of the battery pack. Shorting may occur if the terminals touch metal objects such as a key, so be careful when placing the battery packs (or the transceiver) in bags, and so on. Carry them so that shorting cannot occur with metal objects. Shorting may damage not only the battery pack but also the transceiver. CAUTION: DO NOT operate the transceiver unless the flexible antenna, battery pack, and jack cover are securely attached to the transceiver and that the antenna and battery pack are dry before attachment. Exposing the inside of the transceiver to dust or water will result in serious damage to the transceiver. After exposure to water, clean the battery contacts thoroughly with fresh water and dry them completely to remove any water or salt residue. CAUTION: DO NOT operate the transceiver while driving a vehicle. Safe driving requires your full attention anything less may result in an accident. CAUTION: DO NOT use harsh solvents such as benzine or alcohol when cleaning. This could damage the equipment surfaces. If the surface becomes dusty or dirty, wipe it clean with a soft, dry cloth. CAUTION: DO NOT place or leave the transceiver in direct sunlight or in areas with temperatures below 20C (4F) or above +60C (+140F). CAUTION: DO NOT operate the transceiver if it becomes hot after continuously transmitting for long periods of time. This may damage the transceiver. NEVER place in an insecure place to avoid inadvertent use by unauthorized persons. DO NOT push PTT unless you actually intend to transmit. viii BASIC MANUAL174101518281351116391461217 Battery cautions D Battery cautions Misuse of Li-ion batteries may result in the following hazards: smoke, fire, or the battery may rupture. Misuse can also cause damage to the battery or degradation of batterys performance. R DANGER! NEVER incinerate used battery packs. Internal battery gas may cause an explosion. R DANGER! NEVER strike or otherwise impact the battery pack. Do not use the battery pack if it has been severely impacted or dropped, or if the pack has been subjected to heavy pressure. Battery pack damage may not be visible on the outside of the case. Even if the surface of the battery does not show cracks or any other damage, the cells inside the battery may rupture or catch fire. R DANGER! NEVER leave the battery pack in places with temperatures above 60C (140F). A High-temperature buildup in the battery cells, such as could occur near fires or stoves, inside a sun-heated vehicle, or in direct sunlight for long periods of time, may cause the battery cells to rupture or catch fire. Excessive temperatures may also degrade the packs performance or shorten the battery cells life. R DANGER! NEVER place battery packs near a fire. Fire or heat may cause them to rupture or explode. Dispose of used battery packs in accordance with local regulations. R DANGER! NEVER solder the battery terminals, or NEVER modify the battery pack. This may cause heat generation, and the battery may burst, emit smoke or catch fire. R DANGER! NEVER let fluid from inside the battery get in your eyes. This can cause blindness. Rinse your eyes with clean water, without rubbing them, and immediately go to a doctor. R WARNING! NEVER use deteriorated battery packs. They could cause a fire. R WARNING! NEVER let fluid from inside the battery cells come in contact with your body. If it does, immediately wash with clean water. R WARNING! NEVER put the battery pack in a microwave oven, high-pressure container, or in an induction heating cooker. This could cause a fire, overheating, or cause the battery cells to rupture. CAUTION: DO NOT expose the battery pack to rain, snow, saltwater, or any other liquids. Do not charge or use a wet pack. If the pack gets wet, be sure to wipe it dry cloth before using. CAUTION: DO NOT use the battery if it emits an abnormal odor, heats up, or is discolored or deformed. If any of these conditions occur, contact your Icom dealer or distributor. CAUTION: DO NOT use the battery pack out of the specified temperature range 20C ~ +60C (4F ~ +140F). Using the pack out of this range will reduce the packs performance and battery cell life. CAUTION: DO NOT leave the pack fully charged, completely discharged, or in an excessive temperature environment (above 50C, 122F) for an extended period of time. Otherwise, a shorter battery pack life could occur. If the battery pack must be left unused for a long time, it must be detached from the transceiver after discharging. You may use the pack until the remaining capacity is about half, then keep it safely in a cool, dry place in the following temperature range:

20C (4F) ~ +50C (+122F) (within a month). 20C (4F) ~ +35C (+95F)* (within three months). 20C (4F) ~ +20C (+68F) (within a year).

* BP-307: 20C (4F) ~ +40C (+104F) ix BASIC MANUAL BE SURE to replace the battery pack with a new one approximately five years after manufacturing, even if it still holds a charge. The material inside the battery cells will become weak after a period of time, even with little use. The estimated number of times you can charge the pack is between 300 and 500. Even when the pack appears to be fully charged, the operating time of the transceiver may become short when:

Approximately five years have passed since the pack was manufactured. The pack has been repeatedly charged. The battery cells may deteriorate and swell due to their characteristics if used in an environment and conditions such as:

frequently charged, recharged immediately after full charge, used or saved in a hot place, or charged by methods other than the instructions. If the battery pack swells, it has reached the end of its life due to deterioration. Replace it with a brand new one. D Charging cautions R DANGER! NEVER charge the battery pack in areas with extremely high temperatures, such as near fires or stoves, inside a sun-heated vehicle, or in direct sunlight. In such environments, the safety/

protection circuit in the pack will activate and stop the charging. R DANGER! NEVER charge the transceiver during a lightning storm. It may result in an electric shock, cause a fire, or damage the transceiver. Always disconnect the power adapter before a storm. R WARNING! NEVER charge or leave the battery in the battery charger beyond the specified time for charging. If the pack is not completely charged by the specified time, stop charging and remove it from the battery charger. Continuing to charge the pack beyond the specified time limit may cause a fire, overheating, or the battery may rupture. R WARNING! Occasionally observe the battery pack condition while charging. If any abnormal condition occurs, discontinue using the battery pack. CAUTION: DO NOT insert the transceiver with the battery pack attached into the charger if it is wet or soiled. This could corrode the battery charger terminals or damage the charger. The charger is not waterproof. CAUTION: DO NOT charge the battery pack outside of the specified temperature range: 0C ~ 40C (32F ~ 104F). Icom recommends charging the pack at 25C

(77F). The pack may heat up or rupture if charged out of the specified temperature range. Additionally, battery performance or battery life may be reduced. CAUTION: DO NOT use the battery charger unless the power outlet is easily accessible and near the unit. Remove it from the AC power outlet when not in use. x BASIC MANUAL174101518281351116391461217 Table of contents Important ......................................... i Features .......................................... i Explicit definitions............................ i Supplied Accessories ......................ii FCC Information ..............................ii Disposal ..........................................ii About CE and DOC .........................ii About the ID-52A/ID-52E manuals ...iii Important Notes..............................iv D When using the GPS receiver .......iv D Electromagnetic Interference.........iv D Spurious signals ............................iv D About charging with the power ON ...iv Unique functions ............................ v Voice Coding Technology ..............vii Trademarks ...................................vii Precaution .....................................vii Battery cautions .............................ix D Battery caution...............................ix D Charging caution ........................... x 2 1 PANEL DESCRIPTION 1 Front, top, and side panels............. 1 Function display ............................. 3 INITIAL SETUP 5 Attaching the Battery pack ............. 5 Charging the battery pack .............. 6 D Capacity of the battery pack .......... 6 Inserting a microSD card................ 7 Turning ON the transceiver ............ 7 Adjusting the audio level ................ 7 Saving the setting data onto a microSD card ................................. 8 D Formatting a microSD card............ 8 D Saving the setting data .................. 9 Confirming the GPS is receiving signals ......................................... 10 3 BASIC OPERATION 11 Receiving ..................................... 11 Dualwatch operation .................... 11 D Turning Dualwatch ON or OFF .... 11 D MAIN band selection ................... 11 Monitor function............................ 12 Setting a squelch level ................. 12 Quick Menu window ..................... 13 D Quick Menu window operation .... 13 Selecting the Frequency Selecting mode ............................ 14 D VFO mode ................................... 14 D Memory mode.............................. 14 D Call Channel mode ...................... 14 D Weather Channel mode

(For only the ID-52A) ................... 14 DR function operation .................. 14 Selecting the operating band ....... 15 Selecting the operating mode ...... 15 Setting a frequency ...................... 16 D Selecting a tuning step ................ 16 D Selecting the 1 MHz tuning.......... 16 Attenuator..................................... 16 Scan operation ............................. 17 Speech function ........................... 17 Home Channel function................ 18 D Setting a Home Channel ............. 18 Transmitting ................................. 19 D Making a simplex call .................. 19 D About the transmit power levels .. 20 FM Radio operation...................... 20 D Turning ON the FM Radio ........... 20 Lock function ................................ 20 4 MENU SCREEN 21 Selecting a Menu item.................. 21 D MENU screen operation .............. 21 D Selecting a Menu item ................. 22 5 MEMORY OPERATION 23 Entering Memory channels .......... 23 Selecting a Memory channel ........ 24 Viewing the Memory channel contents ....................................... 24 xi BASIC MANUAL 6 RECORDING A QSO ONTO A microSD CARD 25 About the microSD card ............... 25 Setting the Record operation ....... 26 Recording a QSO audio ............... 27 Playing a recorded audio ............. 27 Removing the microSD card ........ 28 D Removing while the transceiver is OFF ................. 28 D Removing while D-STAR GUIDE INTRODUCTION 41 Unique features of D-STAR .......... 41 What is D-STAR? ......................... 42 About the DR function .................. 43 Ways to Communicate with the DR function .................... 43 Enter your call sign (MY) into the transceiver ...................... 45 Register your call sign the transceiver is ON ................... 28 at a gateway repeater .................. 47 D-STAR OPERATION 49 Making a Simplex call .................. 49 Accessing repeaters..................... 51 Receiving ..................................... 53 Capturing a call sign..................... 55 Making a Local CQ call ................ 56 Making a Gateway CQ call........... 57 Calling an individual station.......... 58 About reflectors ............................ 59 D What is a reflector?...................... 59 D Unlinking a reflector ..................... 59 D Linking to a reflector .................... 60 D Using a reflector .......................... 61 D Reflector Echo Testing ................. 62 D Requesting repeater information . 62 FROM (Access repeater) setting ... 63 TO (Destination) setting ............. 64 When receiving no reply............... 65 Updating the repeater list ............. 66 7 GPS OPERATION 29 Checking your location ................. 29 D Displaying Location Data ............. 29 GPS Logger function .................... 30 D Turning OFF the GPS Logger function ............. 30 8 Bluetooth OPERATION 31 Turning ON the Bluetooth function ................ 31 Connecting to a Bluetooth headset ................... 32 Disconnecting a Bluetooth device ..................... 33 Deleting a Bluetooth device from the pairing list ...................... 33 9 SPECIFICATIONS 34 D General ........................................ 34 D Transmitter .................................. 35 D Receiver ...................................... 35 D Bluetooth ..................................... 36 10 MAINTENANCE 37 Resetting ...................................... 37 D Partial Reset ................................ 37 Troubleshooting ........................... 38 D-STAR GUIDE 40 INDEX 67 ABOUT THE LICENSES 69 MENU SCREEN ITEMS 71 xii BASIC MANUAL174101518281351116391461217 1 PANEL DESCRIPTION Front, top, and side panels 1 2 3 4 5 6 Function Display

(p. 3) 7 8 9 10 11 Speaker 19 18 17 16 15 14 13 12 Internal Microphone 20 21 22 1 PTT SWITCH [PTT]

Hold down to transmit, release to receive. L For only the ID-50E Push briefly and release, and then hold down to transmit a 1750 Hz tone burst. 2 SQUELCH KEY [SQL] (p. 12) z While holding down, rotate [DIAL] to adjust the squelch level. z Hold down to temporarily open the squelch and monitor the operating frequency. 3 POWER KEY [

z Hold down for 1 second to turn the transceiver ON or OFF. (p. 7) z When Screen Capture [PWR] Key is set to ON, push to capture the transceiver display onto a microSD card. ([MENU] > SET > Function > Screen Capture [PWR] Key) 4 microSD CARD SLOT [microSD]

Insert a microSD card (User supplied). (p. 7) 5 ANTENNA CONNECTOR Connect the supplied antenna. 6 TX/RX INDICATOR Lights red while transmitting. Lights green while receiving a signal, or when the squelch is open. 7 RX CALL SIGN DISPLAY D-PAD (LEFT) KEY [CD]/D-pad() z In the DV mode, hold down for 1 second to open the received call history. (p. 51) z In the MENU screen, push to select an upper-tier menu. (p. 21) 8 MENU LOCK KEY [MENU]/[

z Push to open the MENU screen. (p. 21) z Hold down for 1 second to turn the Lock function ON or OFF. (p. 20) 9 MODE SCAN KEY [MODE]/[SCAN]

z Push to select the operating mode. (p. 15) z Hold down for 1 second to open the Scan Type Select window. (p. 17) 1 BASIC MANUAL PANEL DESCRIPTION 1 10 MAIN DUAL KEY [MAIN]/[DUAL]

z Push to set the A or B band as the MAIN band. (p. 11) z Hold down for 1 second to turn the Dualwatch function ON or OFF. (p. 11) 11 ENTER KEY [ENT]

Push to set the selected item or option. 12 DR D-PAD (DOWN) KEY [DR]/D-pad() z Hold down for 1 second to turn the DR function ON or OFF. (p. 14) z In the DR screen, MENU screen, or Quick Menu window, push to move the option or value selector bar down. (pp. 13, 21, 47) 13 QUICK MENU SPEECH KEY [QUICK]/[SPCH]

z Push to open the Quick Menu window. (p. 13) z Hold down for 1 second to audibly announce the displayed frequency and operating mode, or call sign. (p. 17) 14 MEMORY SELECT MEMORY WRITE KEY [MR]/[MW]

z Push to enter the Memory mode. (p. 14) L For the ID-50A only In the Memory mode, push once to enter the Weather Channel mode. z Hold down for 1 second to open the Select Memory Write window. (p. 23) z Hold down for 3 seconds to enter the Memory channel contents into a blank channel. 15 VFO/MHz CLEAR CALL KEY [V/MHz]/[CLR]/[CALL]

z Push to enter the VFO mode. (p. 14) z In the VFO mode, push to select 1 MHz tuning steps. (p. 16) z In the MENU screen, push to select an upper-tier menu. (p. 21) z Push to delete an entered character. (p. 44) z Hold down for 1 second to enter the Call Channel mode. (p. 14) 16 LO D-PAD (RIGHT) KEY [LO]/D-pad() z Hold down for 1 second to open the Select Output Power window. (p. 20) z In the MENU screen, push to select a lower-tier menu. (p. 21) 17 RX CALL SIGN CAPTURE D-PAD (UP) KEY [RXCS]/D-pad() z Hold down for 1 second to capture the calling stations call sign. (p. 53) z In the DR screen, MENU screen, or Quick Menu window, push to move the value or option selector bar up. (pp. 13, 21, 47) 18 VOLUME CONTROL [VOL]

Rotate to adjust the audio level. (p. 7) 19 CONTROL DIAL [DIAL]

z Rotate to select an operating frequency. (p. 16) z In the Memory mode, rotate to select a Memory channel. z Rotate to select a setting item or value. z In the Character Entry mode, rotate to enter characters. 20 EXTERNAL MICROPHONE SPEAKER JACK [MIC/SP]

Connect an optional speaker microphone or headset.

(SP: 3.5 mm (1/8 inch), MIC: 2.5 mm) L Confirm that the transceiver is OFF before connecting or disconnecting optional equipment. 21 EXTERNAL DC IN JACK [DC IN]

Connects to an optional battery charger to charge the attached battery pack. (p. 6) 22 USB PORT (Type-C) [USB]

Connects to an external power source, a PC, or other USB devices. L Not compatible with USB Power Delivery. 2 174101518281351116391461217BASIC MANUAL 1 PANEL DESCRIPTION Function display 1 2 3 4 5 6 7 8 10 11 12 9 23 22 21 20 19 13 14 15 16 17 18 Single band display Dual band display FM RADIO window

(Tuning mode) 1 BATTERY ICON Displays the current capacity of the attached battery pack. (p. 6) L is displayed when the optional battery case is attached. 2 VOX ICON Displayed when the VOX function is ON. 3 OPERATING MODE ICONS Displays the selected operating mode. (p. 15) 4 FM RADIO ICON Displayed when the FM radio is ON. (p. 20) 5 PICTURE SHARE ICON Displayed when the Share Pictures function is ON. 6 DUPLEX ICONS D+: Displayed during plus duplex operation. D: Displayed during minus duplex operation. 7 GPS ICON/GPS ALARM ICON Displays the status of the GPS receiver. (p. 10) blinks when the GPS alarm beeps. 8 TONE ICONS Displayed when the tone or digital squelch function is ON. 9 RECORD ICONS (p. 26)

: Displayed while the transceiver is recording.

: Displayed while the recording is paused. 10 microSD ICON (p. 8) is displayed when a microSD card is inserted. and alternately blink while accessing the microSD card. 11 AUTO POWER OFF ICON Displayed when the Auto Power OFF function is ON. I B A S C M A N U A L 3 PANEL DESCRIPTION 1 12 CLOCK DISPLAY 13 EMR/BK/PACKET LOSS/AUTO REPLAY ICONS EMR:

BK:

L:

Displayed when the Enhanced Monitor Request (EMR) function is ON. Displayed when the Break-in (BK) function is ON. Displayed when packet loss has occurred. Displayed when the Auto Reply function is ON. 14 WEATHER ALERT ICON Displayed when the Weather Alert function is ON. (For only the ID-50A) 15 ATTENUATOR ICON Displayed when the attenuator is ON. (p. 16) 16 SKIP ICONS Displayed when Memory Skip is selected. SKIP:

PSKIP: Displayed when Program Skip is selected. 17 MEMORY CHANNEL NUMBER In the Memory mode, it displays the selected Memory group and Memory channel number. In the Call Channel mode, it displays 144 or 430 and C0 or C1. 18 MEMORY MODE ICON Displayed while in the Memory mode. 19 S/RF METER Displays the relative signal strength of the received signal. Displays the output power level of the transmit signal. 20 POWER ICONS Displays the output power level of the transmit signal in 5 levels

(SLO/LO1/LO2/MID/no icon). L When you select HIGH power, the power icon disappears. 21 MEMORY NAME DISPLAY L You can change the display type in the Quick Menu window. 22 FREQUENCY READOUT Displays an operating frequency. 23 MAIN BAND ICON When the Dualwatch function is ON, it indicates that the selected band (A or B) is the MAIN band. When the Dualwatch function is OFF, it indicates the selected band (A or B). TM:

AP:

Displayed while in the Terminal mode. Displayed while in the Access Point mode. TIP: Download and see About the DV Gateway function on the Icom website about the Terminal mode and the Access Point mode. 4 174101518281351116391461217BASIC MANUAL 2 INITIAL SETUP Before starting using the transceiver, follow these steps for the initial setup. STEP 1 Attaching the battery pack and charging the battery. (pp. 5, 6) STEP 2 Inserting a microSD card. (p. 7) STEP 3 Turning ON the transceiver. (p. 7) STEP 4 Adjusting the audio level. (p. 7) STEP 5 Saving your initial setting onto a microSD card. (p. 8) STEP 6 Confirming the GPS signal receiving. (p. 10) STEP 7 * Entering your Call sign (MY) into the transceiver. (p. 45) STEP 8 * Registering your call sign at a Gateway repeater. (p. 47) You have completed the steps!!

* You can skip the steps if you do not plan to operate D-STAR right now. Attaching the Battery pack Attach or detach the battery pack or battery case, as illustrated below. L When attaching, slide the battery pack and hold it down until both latches are locked. To attach To detach 2 1 Battery pack or battery case 1 1 2 NOTE:

Even when the transceiver is OFF, a slight current still flows in the circuits. Remove the battery pack or case from the transceiver when not using it for a long time. Otherwise, the attached battery pack or case will become exhausted, and need to be recharged or replaced. When the temperature is around 0C (32F) or below, the Battery Protection function automatically sets the transceiver power to Low1 power (0.5 W), and disables power selections High, Mid, and Low2. 5 BASIC MANUAL INITIAL SETUP 2 Charging the battery pack D Capacity of the battery pack ICON BATTERY STATUS The battery has sufficient capacity. The battery is exhausted a little. The battery is nearing exhaustion. Blinking The battery is almost fully exhausted. To display the correct battery status:

Select the attached battery pack in the following item. (Default: BP-271/BP-272)

([MENU] > SET > Function > Battery Pack Select) To display the Battery Pack Select dialog every time you attach the battery pack, set the following item to ON.

([MENU] > SET > Function > Battery Pack Confirmation) NOTE:

Before using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. BE SURE to turn OFF the transceiver while charging. Otherwise, the attached battery pack cannot be charged. While charging, the charging icon The icon and Charging.... disappear when the battery pack is fully charged. You may not be able to charge:

and Charging.... are displayed.

- Depending on your USB cable or power adapter.

- When using a USB hub or connecting to a low output USB port. Charging time may differ, depending on the USB port. To use a mobile device or a PC as an external power source, set the following item to ON

(default).

[MENU] > SET > Function > USB Power Input (Phone, Tablet, PC) Power adapter or external battery

(User supplied) USB cable Turn OFF To a USB port L See the Advanced manual about the optional battery packs and chargers. 6 174101518281351116391461217BASIC MANUAL 2 INITIAL SETUP Inserting a microSD card See page 25 for the usable microSD card. 1. Turn OFF the transceiver. 2. Pull down the [microSD] slot cover on the side panel. 3. With the terminals facing the front, insert the card into the slot until it locks in place and makes a click sound. L When removing, push in the microSD card until a click sounds. The card is unlocked, and you can pull it out. NOTE:

DO NOT touch the terminals. DO NOT remove the card from the transceiver while the card is being accessed. Otherwise, the card data may be corrupted or deleted. 4. Completely close the [microSD] slot cover. CAUTION: DO NOT forcibly or inversely insert the card. It will damage the card or the slot.

[microSD] slot microSD card Terminals facing the front Slot cover Turning ON the transceiver z Hold down [

] for 1 second to turn ON the transceiver. A beep sounds. After the opening message and remaining battery capacity are displayed, the operating frequency or repeater name is displayed. z Hold down [

transceiver.

] for 1 second again to turn OFF the

Adjusting the audio level Rotate [VOL] to adjust the audio level. L The display shows the audio level while adjusting.

[VOL]

7 BASIC MANUAL INITIAL SETUP 2 Saving the setting data onto a microSD card You can save the Memory channels, MENU screen item settings, repeater lists, and so on, onto a microSD card. Saving settings onto a card lets you easily restore the transceiver to its previous settings, even if you perform an All Reset. D Formatting a microSD card IMPORTANT! Before using a microSD card for the first time, format it in the transceiver. Formatting a card erases all its data. Before formatting any used card, back up its data onto another device.

[MENU] > SET > SD Card > Format 1. Turn ON the transceiver. If a microSD card is inserted, the microSD icon While accessing, and alternately blink. is displayed. 2. Push [MENU]. 3. Select SD Card in the SET menu. 4. Select Format. The confirmation dialog is displayed. 5. Select Yes. The formatting starts, and the display shows the formatting progress. After the formatting ends, returns to the SD CARD screen. L If The GPS Logger function is activated. and/or The QSO Log function is activated. are displayed, turn OFF the functions or ignore the messages and select YES. L To exit the MENU screen, push [MENU]. 8 174101518281351116391461217BASIC MANUAL 2 INITIAL SETUP Saving the setting data onto a microSD card D Saving the setting data

[MENU] > SET > SD Card > Save Setting 1. Push [MENU]. 2. Select SD Card in the SET menu. 3. Select Save Setting. 4. Select <<New File>>. The FILE NAME screen is displayed. L The file name is automatically set in the following format:

Setyyyymmdd_xx (yyyy: Year, mm: month, dd: day, xx: serial number). 5. Push [ENT] to save the file with the displayed name. The confirmation dialog is displayed. 6. Select YES. Saves the setting data. While saving, a progress bar is displayed, then returns to the SD CARD screen after the saving is completed. L To exit the MENU screen, push [MENU]. TIP: You can edit the saved settings on your PC using the optional CS-50 programming software. 9 BASIC MANUAL INITIAL SETUP 2 Confirming the GPS is receiving signals The transceiver has a built-in GPS receiver. You can check your current location, and transmit GPS data in the DV mode. See the Advanced manual for details. Confirm the GPS receiver is receiving satellite data. The GPS icon blinks when searching for satellites.

(No icon) The GPS icon stops blinking when the minimum needed number of satellites are found. L It may take only a few seconds to receive, or it may take a few minutes, depending on your operating environment. If you have difficulties receiving it, we recommend that you try a different location. L When GPS Select is set to Manual, the icon is not displayed.

([MENU] > GPS > GPS Set > GPS Select) NOTE: If you cannot receive GPS data, manually set the date and time.

([MENU] > SET > Time Set > Date/Time) TIP: To prolong the battery life in the GPS mode Manually update your location with the received GPS data. 1. Confirm the GPS receiver is receiving your location data (See above). 2. Display the MANUAL POSITION screen.

([MENU] > GPS > GPS Set > Manual Position) 3. Push [QUICK]. The Quick Menu window is displayed. 4. Select Capture From GPS. 5. Set GPS Select to Manual.

([MENU] > GPS > GPS Set > GPS Select) TIP: The GPS log data is saved onto the microSD card. (p. 30) 10 174101518281351116391461217BASIC MANUAL 3 BASIC OPERATION Receiving The following are basic settings for receiving. Setting the Dualwatch function. (p. 11) Selecting the Frequency Selecting mode. (p. 14) Selecting the operating band. (p. 15) Selecting the operating mode. (p. 15) Setting a frequency. (p. 16) Setting a squelch level. (p. 12) Dualwatch operation The Dualwatch function simultaneously monitors 2 frequencies. The ID-50A/ID-50E has 2 independent receiver circuits, A and B bands. You can set different frequencies or operating modes in each band. L Selectable frequency differs, depending on the transceiver version and the A/B bands. See the specifications for details. (p. 34) L When the Dualwatch function is ON, the audio output may be interrupted when the frequency is switched while scanning, or by other factors. A band B band Dual band display

(The Dualwatch function is ON) D Turning Dualwatch ON or OFF Hold down [DUAL] for 1 second to turn the Dualwatch function ON or OFF. When the Dualwatch function is ON, the display shows the A band in the upper half and the B band in the lower half of the display. L MAIN is displayed on the MAIN band, where you can change the settings. L The SUB band can be automatically muted.

([MENU] > SET > Sounds > Sub Band Mute) Single band display

(The Dualwatch function is OFF) When the Dualwatch function is OFF, the display shows only the MAIN band. Push [MAIN] to select the A or B band. L On the B band, if you select a memory channel that is out is displayed, and of the selectable frequency range, the signal cannot be received. L While receiving or transmitting a DV signal on the MAIN band, DV mode audio from the SUB band will be muted. B band is out of the selectable frequency range. D MAIN band selection Push [MAIN] to alternately set the A or B bands as the MAIN band. MAIN is displayed on the MAIN band, where you can change the settings. L Band selection, receive frequency setting, receive mode selection, Memory channel selection, the Memory Write operation, the Band Scope operation can be made only on the MAIN band. 11 B band is set as the MAIN band. BASIC MANUAL BASIC OPERATION 3 Monitor function The Monitor function is used to listen to weak signals without changing the squelch setting. While holding down [SQL], you can hear weak signals on the frequency. TIP: You can set the Monitor Hold function on the MENU screen. The transceiver opens or closes the squelch each time you push [SQL].

([MENU] > SET > Function > Monitor) Setting a squelch level Noise squelch enables the audio to be heard only while receiving stronger signal than the set level. A higher level blocks weak signals, and receives only stronger signals. A lower level receives weaker signals. L Throughout this document, Noise squelch is called Squelch. While holding down [SQL], rotate [DIAL] to select the squelch level. L Information Options: OPEN, AUTO (default), and LEVEL 1 ~

LEVEL 9. LEVEL 1 is loose squelch (for weak signals) and LEVEL 9 is a tight squelch (for strong signals). AUTO is an automatic level adjustment using a noise pulse counting system. OPEN is the continuously open setting. In the DV mode, you cannot set the squelch to OPEN. The first segment blinks. Automatic squelch Maximum squelch level 12 174101518281351116391461217BASIC MANUAL 3 BASIC OPERATION Quick Menu window You can open the Quick Menu window by pushing [QUICK]. In the window, the selectable items may differ, depending on the operating mode or function. The items listed below are examples. VFO mode Memory mode Call CH mode Weather CH mode*5 DR function Band Select Group Select DUP GPS Information Group Select DUP TONE*1 D.SQL*2 TS ATT*4 DTMF TX*3 Voice TX*3 Channel Select Group TONE*1 GPS Position Repeater Detail DUP TONE*1 D.SQL*2 TS ATT*4 SKIP D.SQL*2 Weather Alert ATT*4 TS ATT*4 DTMF TX*3 Voice TX*3 Voltage DTMF TX

<<REC Start>>

Voice TX

<<FM Radio ON>> GPS Information

<<FM Radio Mode>> GPS Position GPS Information <<GPS Logger Only>> Weather Alert*5 GPS Information DTMF TX*3 GPS Position Display Type GPS Position Voice TX*3 Weather Alert*5 FM Radio D.SQL Weather Alert*5 GPS Information Display Type

<<FM Radio OFF>> SKIP Home CH Set GPS Position Voltage Voltage Weather Alert*5 Band Scope MR ATT Home CH Set Voltage Band Scope Home CH Set

<<REC Start>>

<<FM Radio Mode>> Band Scope

<<REC Start>>

Display Type

<<FM Radio ON>>

<<FM Radio ON>> Voltage

<<FM Radio Mode>>

<<FM Radio Mode>> Band Scope

<<GPS Logger Only>>

<<GPS Logger Only>>

<<REC Start>>

<<REC Start>>

<<FM Radio ON>>

<<FM Radio Mode>>

<<GPS Logger Only>>

<<FM Radio ON>>

<<FM Radio Mode>>

<<GPS Logger Only>>

*1 For only FM/FM-N.

*4 For only A band.

*2 For only DV.

*5 For only the ID-50A.

*3 For only FM/FM-N/DV. D Quick Menu window operation Simplified descriptionSelect operation In this manual, the users Select operation is simplified, as described below. Simplified description:

1. Push [QUICK]. 2. Select TS. Operation:

1. Push [QUICK] to open the Quick Menu window. 2. Push D-pad() to select TS, and then push [ENT]. D-pad()

[ENT]

D-pad()

[QUICK]

13 BASIC MANUAL BASIC OPERATION 3 Selecting the Frequency Selecting mode D VFO mode Rotate [DIAL] to set an operating frequency. D Memory mode Select a Memory channel where an operating frequency and other parameters are saved. L In the Memory mode, and the Memory Channel number are displayed. D Call Channel mode Select a Call Channel to recall your most often used frequencies quickly. D Weather Channel mode (For only the ID-50A) Weather Channels are used for monitoring Weather Channels from the National Oceanographic and Atmospheric Administration (NOAA) broadcasts. 1. Select a mode. L Information Push [V/MHz] to select the VFO mode. In the VFO mode, push [V/MHz] to select the 1 MHz tuning step. Push [MR] to select the Memory mode. Hold down [CALL] for 1 second to select the Call Channel mode. For only the ID-50A, push [MR] in the Memory mode to select the Weather Channel mode. 2. Rotate [DIAL] to select an operating frequency or a channel. VFO mode Memory mode Call Channel mode Weather Channel mode DR function operation Using the D-STAR Repeater (DR) function, you can easily select the entered repeaters and Your call signs by rotating

[DIAL]. You can make not only a repeater call but also a simplex call. Hold down [DR] for 1 second. Displays the DR screen. L Hold down [DR] again to cancel the DR function. L See D-STAR GUIDE (p. 40) for the DR function details. 14 174101518281351116391461217BASIC MANUAL 3 BASIC OPERATION Selecting the operating band 1. Push [V/MHz] to select the VFO mode. 2. Push [QUICK]. 3. Select Band Select. 4. Select the frequency band. Sets the operating band, then returns to the standby screen. L Selectable frequency bands differ, depending on the transceiver version. See the specifications for details.

(p. 34) Transmit and receive Receive only Selecting the operating mode The transceiver has 5 operating modes, FM, FM-N, AM, AM-N, and DV. Push [MODE] to select the operating mode. L Information In the FM-N mode, the TX modulation is automatically set to narrow (approximately 2.5 kHz). The AM-N mode can be used for only 108.000 MHz ~

143.995 MHz. On 108.000 MHz ~ 136.991 MHz, you can use only AM or AM-N. On the Ham band, you can use only FM, FM-N, or DV. When the GPS TX mode is selected in the DV mode, is displayed.

([MENU] > GPS > GPS TX Mode) TIP: You can make a simplex call not only in the FM mode but also in the DV mode. FM mode 15 BASIC MANUAL BASIC OPERATION 3 Setting a frequency D Selecting a tuning step When you select the frequency by rotating [DIAL] in the VFO mode, it changes in the selected tuning step. 1. Push [QUICK]. 2. Select TS. 3. Select a tuning step. Options (kHz):

5.0 25.0 6.25 30.0 8.33*

10.0 12.5 15.0 20.0 50.0 100.0 125.0 200.0 Auto*

* For only 108.000 MHz ~ 136.991 MHz Sets the tuning step, then returns to the standby screen. L Information You can set the tuning step for both the VFO and Memory mode. The VFO mode scan and the Band Scope function also use this step to search for signals. On 108.000 MHz ~ 136.991 MHz, you can select only 8.33 kHz, 25.0 kHz, or Auto. D Selecting the 1 MHz tuning You can change the operating frequency in 1 MHz steps for quick tuning. 1. In the VFO mode, push [V/MHz]. Enters the 1 MHz Tuning Select mode, and the 1 MHz digit blinks. 2. Rotate [DIAL]. The frequency changes in 1 MHz steps. 3. Push [V/MHz]. Exits the 1 MHz Tuning Select mode. L The tuning step setting (above) remains. Attenuator The Attenuator prevents a desired signal from becoming distorted when a powerful signal is near the frequency, or when a powerful electric field, such as from a broadcasting station, is near your location. L You can use the Attenuator only on the A band. 1. Push [QUICK]. 2. Select ATT. 3. Select ON. ATT is displayed. Blinks The 1 MHz Tuning Select mode The Attenuator is ON. 16 174101518281351116391461217BASIC MANUAL 3 BASIC OPERATION Scan operation Scanning is a versatile function that can automatically search for signals. A scan makes it easier to locate stations to contact or listen to, or to skip unwanted channels or frequencies. This section describes the basic scan operation. See the Advanced manual for details. Example: Scanning in the VFO mode 1. Push [V/MHz] to enter the VFO mode. 2. Hold down [SCAN] for 1 second. Opens the Scan Type Select window. 3. Select ALL. The scan starts. The decimal point and the selected scan type icon blink. L When receiving a signal, the S-meter displays the received signal strength. 4. Push [CLR]. Cancels the scan. Speech function The Speech function audibly announces the displayed frequency and mode by holding down [SPCH] for 1 second. Also, you can set various Speech functions, such as the DIAL Speech function or Mode Speech function in the MENU screen.

([MENU] > SET > SPEECH > DIAL SPEECH)

([MENU] > SET > SPEECH > MODE SPEECH) L Information In the VFO, Memory, or Call Channel mode, the Speech function announces the current frequency and operating mode. When using the DR function, the Speech function announces the displayed call sign. Blinks

[SPCH]

17 BASIC MANUAL BASIC OPERATION 3 Home Channel function You can set an often-used frequency, Memory channel, or repeater as a Home Channel in VFO mode, Memory mode, and DR screen. When a Home CH is selected by rotating [DIAL], a beep sounds. You will know the Home CH selection without looking at the display. D Setting a Home Channel 1. Select the VFO mode, Memory mode, or the DR screen to set a Home Channel. (p. 14) 2. Select a frequency, Memory channel, or access repeater to be set as a Home Channel. (p. 16) 3. Push [QUICK]. 4. Select Home CH Set. 5. Select Set Frequency (VFO mode), Set Channel

(Memory mode), or Set Repeater (DR screen). Sets a Home Channel, then returns to the standby screen. 18 174101518281351116391461217BASIC MANUAL 3 BASIC OPERATION Transmitting D Making a simplex call R WARNING! NEVER transmit for long periods of time. During prolonged transmissions at high or mid-power, the transceiver radiates heat to protect itself from overheating. The transceivers chassis will become hot and may cause a burn. To prevent the transceivers overheating, the default setting of the time-out timer function is set to 5 minutes. Be careful when the time-out timer function is turned OFF or set to a long time period, and you transmit for long periods. CAUTION: DO NOT operate the transceiver where heat dissipation will be obstructed if the transceiver is also being charged with an external power supply. Poor heat dissipation may cause a burn, warp the casing, or damage the transceiver. CAUTION: DO NOT transmit without an antenna. NOTE: When the transceiver becomes hot, the transceivers heat protection function gradually reduces the output power to approximately 2.5 watts, then it stops transmission after that. This is done to protect the transceiver itself until it can cool down. NOTE: You can transmit on only the amateur frequency bands. IMPORTANT: Before transmitting, monitor the operating frequency to make sure transmitting wont cause interference to other stations on the same frequency. 1. Select the operating mode. (p. 15) 2. Rotate [DIAL] to set the operating frequency. (p. 16) 3. Hold down [LO] for 1 second to select an output power. The Select Output Power window is displayed. L Information You can select S-Low, Low1, Low2, Mid, or High. You can also select an output power by rotating [DIAL]

while holding down [LO]. When you select a high power, the power icon disappears. TX/RX indicator

[DIAL]

Select a level to suit your operating requirements. 4. Hold down [PTT] to transmit, and speak into the

[PTT]

microphone at your normal voice level. The TX/RX indicator lights red. The S/RF meter displays the output power level. 5. Release [PTT] to receive. TIP: To maximize the readability of your signal 1. After pushing [PTT], pause briefly before you start speaking. 2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, then speak at your normal voice level. Microphone

[LO]

19 BASIC MANUAL BASIC OPERATION 3 D About the transmit power levels When an external DC power cable (13.5 V DC) is connected, or a BP-271/BP-272/BP-307 is used:

Approximately 5 W (High)/2.5 W (Mid)/

1.0 W (Low2)/0.5 W (Low1)/0.1 W (S-Low) When the BP-273 is used:

Approximately 0.1 W (S-Low) (fixed) Output power NOTE: When using the BP-273, you can select S-Low, Low1, Low2, Mid, or High. However, SLO is displayed while transmitting, and the output power is limited to approximately 0.1 watts. S/RF meter FM Radio operation D Turning ON the FM Radio 1. Push [QUICK]. 2. Select <<FM Radio ON>>. Returns to the standby screen, and the FM RADIO window is displayed. is displayed. TIP: To turn OFF the FM Radio, push [QUICK], and then select <<FM Radio OFF>>. Lock function Activate to prevent accidental frequency changes and unnecessary function access. Hold down [

When the Key Lock function is ON, and the locked key or [DIAL] is pushed or rotated, LOCK

] for 1 second to turn ON the Key Lock function. ON is displayed. L Information To turn OFF the function, hold down [LOCK] for 1 second again (Until LOCK OFF is displayed).

], [PTT], [SQL], and [VOL] can be used even if the Key Lock function is ON.

You can change the keys to be locked on the MENU screen.

([MENU] > SET > Function > Key Lock) 20 174101518281351116391461217BASIC MANUAL 4 MENU SCREEN You can open the MENU screen by pushing [MENU]. You can use the MENU screen to set infrequently changed values or function settings. See the appendix for the MENU item list. (p. 71) For details of each item, see the Advanced manual. TIP: The MENU screen is constructed in a tree structure. You may go to the next tree level, or go back a level, depending on the selected item. Selecting a Menu item D MENU screen operation Selects an item or option. Switches between the MENU screen and the standby screen. Goes to the previous tree level. Goes to the previous tree level. Goes to the next tree level. Returns to the default setting.

[ENT]

Sets an option. Selects an item or option. Simplified descriptionSelect operation In this manual, the users Select operation is simplified, as described below. Simplified description:

1. Push [MENU]. 2. Select 30min. Operation:

1. Push [MENU] to open the MENU screen. 2. Push D-pad() to select 30min, and then push [ENT]. 21 BASIC MANUAL MENU SCREEN 4 D Selecting a Menu item Example: Set Auto Power OFF to 30 min.

[MENU] > SET > Time Set > Auto Power OFF 1. Push [MENU]. 2. Select SET. 3. Select Time Set. 4. Select Auto Power OFF. 5. Select 30min. Sets the option, then goes back to a tree level. (The TIME SET screen is displayed.) L To exit the MENU screen, push [MENU]. The Auto Power OFF icon is displayed. TIP: To return to the default setting 1. Push [QUICK] in step 5. 2. Select Default. The setting returns to the default. L The default settings of each item are described in the Advanced manual. 22 174101518281351116391461217BASIC MANUAL 5 MEMORY OPERATION Entering Memory channels The transceiver has a total of 500 Memory channels to save often-used frequencies. In the Memory mode, you can quickly select the saved memories. This section describes the basic channel content entry. Example: Entering 146.030 MHz/FM mode into Channel 11 in Group 01. 1. Push [V/MHz] to enter the VFO mode. 2. Push [MODE] to enter the FM mode. 3. Rotate [DIAL] to set a frequency to 146.030 MHz. 4. Hold down [MW] for 1 second. A short and a long beep sound. 5. Select Write to New CH. 6. Push [QUICK]. 7. Select Group Select. 8. Select Group 01. 9. Rotate [DIAL] to select Channel 11. 10. Push [ENT]. The confirmation dialog is displayed. 11. Select YES. Beeps sound and the Memory contents are briefly displayed, then returns to the VFO mode. TIP: Holding down [MW] for 3 seconds in step 4 enters the contents into a blank channel. 23 BASIC MANUAL MEMORY OPERATION 5 Selecting a Memory channel In the Memory mode, you can select the Memory channels by rotating [DIAL]. 1. Push [MR] to enter the Memory mode. L For only the ID-50A, pushing [MR] alternately selects the Memory and Weather Channel modes. 2. Rotate [DIAL]. Selects a Memory channel. L To select the Memory group, push [QUICK], and then select Group Select. L Blank channels are not selected. TIP: To sequentially select a channel in a different group Set Channel Select Group Range to All Groups in the Quick Menu window. Memory group number and channel number Viewing the Memory channel contents You can view the Memory channel contents on the MEMORY screen. Example: Viewing the contents of Channel 01 in Group 00.

[MENU] > MEMORY > Memory CH 1. Push [MENU]. 2. Select MEMORY on page 2 of the MENU screen. 3. Select Memory CH. 4. Select Group 00. 5. Select Channel 01. Channel contents are displayed. L Rotate [DIAL] to scroll the screen. L To exit the MENU screen, push [MENU]. 24 174101518281351116391461217BASIC MANUAL 6 RECORDING A QSO ONTO A microSD CARD About the microSD card NOTE: The microSD and microSDHC cards are not available from Icom (User supplied). A microSD card of up to 2 GB, or a microSDHC of up to 32 GB, can be used in this transceiver. Icom has checked the compatibility with the following cards.

(As of April 2023) Brand Type Memory size microSD SanDisk microSDHC 2 GB 4 GB 8 GB 16 GB 32 GB L The performance of the cards listed to the left is not guaranteed. L Throughout this document, the microSD card and microSDHC card are called the microSD card or the card. L Before using the microSD card, format it using the transceiver, even a preformatted card for PCs or other uses. (p. 8) TIP: Saving the factory default data is recommended. (p. 9)

([MENU] > SET > SD Card > Save Setting) NOTE:

Before using the microSD card, thoroughly read the instructions of the card. If you do any of the following, the card data may be corrupted or deleted.

- You remove the card from the transceiver while accessing the card.

- You change the external power supplys voltage while accessing the card.

- You drop, impact, or vibrate the card. DO NOT touch the contacts of the card. The transceiver takes a longer time to recognize a higher-capacity card. The card will get warm if used continuously for a long period of time. The card has a certain lifetime, so data reading or writing may not be possible after using it for a long period of time. When reading or writing data is impossible, the cards lifetime has ended. In this case, purchase a new one. We recommend you make a backup file of the important data onto your PC. Icom will not be responsible for any damage caused by data corruption of a card. 25 BASIC MANUAL RECORDING A QSO ONTO A microSD CARD 6 Recording a QSO audio NOTE:

Once a voice recording starts, the Recording function will be continuously turned ON until you stop recording, even if you turn OFF the transceiver. FM Radio audio cannot be recorded. 1. Push [QUICK]. 2. Select <<REC Start>>. Recording started is displayed. L Information Recording continues until you stop recording, or the card becomes full. If the recording file reaches 2GB, the transceiver automatically creates a new file and is displayed while recording. is displayed while the recording is paused. continues recording. 3. Push [QUICK]. 4. Select <<REC Stop>>. Recording stopped is briefly displayed, and voice recording stops. TIP: As the default setting The recording is paused while the squelch is closed, and resumes when a signal is received. ([MENU] > RECORD > QSO Recorder > Recorder Set > RX REC Condition) The recording automatically starts when you start to transmit, even if the Recording function is turned OFF. ([MENU] > RECORD > QSO Recorder > Recorder Set > PTT Auto REC) 26 174101518281351116391461217BASIC MANUAL 6 RECORDING A QSO ONTO A microSD CARD Playing a recorded audio

[MENU] > RECORD > QSO Recorder > Play Files 1. Push [MENU]. 2. Select QSO Recorder in the RECORD menu. 3. Select Play Files. 4. Select the folder that contains the file you want to play. L The folder is named yyyymmdd (y: year, m: month, d: day). 5. Select the file that you want to play. The VOICE PLAYER screen is displayed and starts playing. L To pause, push [ENT]. To restart, push [ENT] again. L To exit the MENU screen, push [MENU]. Removing the microSD card D Removing while the transceiver is OFF 1. Turn OFF the transceiver. 2. Open the [microSD] slot cover. 3. Push in the microSD card until a click sounds, and then carefully pull it out. L DO NOT touch the terminals. Push in 4. Completely close the [microSD] slot cover. Slot cover Pull out 27 BASIC MANUAL RECORDING A QSO ONTO A microSD CARD 6 D Removing while the transceiver is ON

[MENU] > SET > SD Card > Unmount 1. Push [MENU]. 2. Select SD Card in the SET menu. 3. Select Unmount. The confirmation dialog is displayed. 4. Select YES. When the unmounting is completed, Unmount is completed. is briefly displayed, then the display automatically returns to the SD CARD screen. 5. Push in the microSD card until a click sounds, and then carefully pull it out. L See Removing while the transceiver is OFF for details. 6. Completely close the [microSD] slot cover. NOTE: After removing the microSD card, firmly close the

[microSD] slot cover as shown to the right. Close the slot cover firmly YES NO 28 174101518281351116391461217BASIC MANUAL 7 GPS OPERATION NOTE: The built-in GPS receiver cannot calculate its location if it cannot receive signals from the GPS satellites. Refer to page iv for details. Checking your location You can check your current location. If you transmit while displaying the GPS POSITION screen, the screen closes. To check your current location or callers location while transmitting, push [QUICK], then select GPS Position. D Displaying Location Data 1. Confirm the GPS icon is displayed. 2. Push [QUICK]. 3. Select GPS Position. The GPS POSITION screen is displayed. 4. Push D-pad(). Changes between the MY (My position), RX (Received position), MEM (GPS Memory position), and ALM (GPS Alarm position) screen. 5. Push [CLR]. Returns to the standby screen.

(Example: Displays GPS Memory position.) About the GPS POSITION screen Your course heading Course direction Displays My position. Latitude Longitude Grid Locator Altitude Speed Time 29 BASIC MANUAL GPS OPERATION 7 GPS Logger function The GPS Logger function enables you to save the location data from a GPS receiver onto a microSD card as a log. The GPS Logger saves Latitude, Longitude, Altitude, Positioning state, Course, Speed, Date, and Time. Using this GPS Logger while traveling, you can check your trip history on mapping software. About the log file If the log file imported to mapping software, you can display your route as you move on to the software map. L The log files may not be compatible with all mapping software. L See Using the GPS Logger function that can be downloaded from the Icom website for details on copying the log files onto your PC. NOTE:

The GPS Logger function requires a microSD card (User supplied). See page 7 for details. This function is turned ON as the default setting. Therefore when you insert a microSD card, this function continuously saves the location data from the GPS receiver, even if you turn OFF the transceiver, then ON again. To turn OFF the function, do the steps below. When the microSD card is full, this function will automatically be paused. D Turning OFF the GPS Logger function You can turn OFF the GPS Logger function by following the steps below.

[MENU] > GPS > GPS Logger > GPS Logger 1. Push [MENU]. 2. Select GPS Logger in the GPS menu. 3. Select GPS Logger. 4. Select OFF. L To exit the MENU screen, push [MENU]. 30 174101518281351116391461217BASIC MANUAL 8 SPECIFICATIONS D General Frequency coverage (unit: MHz):

USA version

[A band]

Receive:

Transmit:

[B band]

Receive:

Transmit:

[BC band (WFM)]

Receive:

EUR version

[A band]

Receive:

Transmit:

[B band]

Receive:

Transmit:

[BC band (WFM)]

Receive:

Modes:

108.000 ~ 174.000 (Guaranteed only 144 ~ 148 MHz) 375.000 ~ 479.000 (Guaranteed only 440 ~ 450 MHz) 144.000 ~ 148.000 440.000 ~ 450.000 137.000 ~ 174.000 (Guaranteed only 144 ~ 148 MHz) 375.000 ~ 479.000 (Guaranteed only 440 ~ 450 MHz) 144.000 ~ 148.000 440.000 ~ 450.000 88.000 ~ 108.000 108.000 ~ 174.000 (Guaranteed only 144 ~ 146 MHz) 375.000 ~ 479.000 (Guaranteed only 430 ~ 440 MHz) 144.000 ~ 146.000 430.000 ~ 440.000 137.000 ~ 174.000 (Guaranteed only 144 ~ 146 MHz) 375.000 ~ 479.000 (Guaranteed only 430 ~ 440 MHz) 144.000 ~ 146.000 430.000 ~ 440.000 76.000 ~ 108.000 FM/FM-N (F2D/F3E), AM/AM-N(A3E)*, DV (F7W)

* RX only The number of Memory channels: 500 channels (in 50 groups) The number of Skip channels:

The number of FM Radio memory channels:

100 channels 500 channels The number of Program Scan Edge: 25 channels (2 edge frequencies in each channel) The number of Call channels:

Number of repeater memories:

Number of GPS memories:

Usable temperature range:

Tuning steps:

4 channels (2 channels 2 bands) 2500 (in 50 groups) 300 20C ~ +60C, 4F ~ +140F 5, 6.25, 8.33*, 10, 12.5, 15, 20, 25, 30, 50, 100, 125, and 200 kHz

* For only 108.000 MHz ~ 136.991 MHz 2.5 ppm (20C ~ +60C, 4F ~ +140F) 10.0 ~ 16.0 V DC for external DC power 7.4 V DC specified Icoms battery pack 5.5 V DC specified Icoms battery case Frequency stability:

Power supply:

Current drain (at 7.4 V DC):

Transmit (at 5 W) Receive (Maximum output, 8 load) 2.5 A or less FM/FM-N DV Antenna connector:

Dimensions:

(projections not included) Weight (approximate):

31 400 mA or less 450 mA or less SMA (50 ) 61.1 (W) 121.6 (H) 29.7 (D) mm, 2.4 (W) 4.8 (H) 1.2 (D) inches 300 g, 10.6 oz (Including battery pack and antenna) BASIC MANUAL SPECIFICATIONS 8 D Transmitter Modulation system:

FM/FM-N DV Variable reactance frequency modulation GMSK reactance frequency modulation Output power (at 7.4 V DC): High: 5.0 W, Mid: 2.5 W, Low2: 1.0 W, Low1: 0.5 W, S-Low: 0.1 W Maximum frequency deviation:

FM FM-N 5.0 kHz 2.5 kHz Spurious emissions:

60 dBc or less at High/Mid 13 dBm or less at Low2/Low1/S-Low Microphone impedance: 2.2 k Double Conversion Superheterodyne D Receiver Receive system:

Intermediate frequencies:

A band B band Sensitivity:

Ham band FM/FM-N 0.18 V or less (at 12 dB SINAD) 1st IF 58.05 MHz, 2nd IF 450 kHz 1st IF 57.15 MHz, 2nd IF 450 kHz Outside Ham band DV 0.2 V or less (at 1% BER) Band Frequency range

(MHz) FM/FM-N/WFM*1

(12 dB SINAD) AM/AM-N*2

(10dB S/N) BC band 76.000 ~ 108.000 A band B band 108.000 ~ 136.991 137.000 ~ 142.000 142.005 ~ 148.000 148.005 ~ 174.000 375.000 ~ 399.995 400.000 ~ 479.000 137.000 ~ 148.000 148.005 ~ 174.000 375.000 ~ 399.995 400.000 ~ 479.000 1 V or less 0.18 V or less 0.18 V or less 0.32 V or less 0.5 V or less 0.32 V or less 0.18 V or less 0.32 V or less 0.5 V or less 0.32 V or less 1 V or less 1 V or less

*1 WFM is for only BC band. FM and FM-N is for only A/B band.

*2 AM-N is for only 108.000 MHz ~ 143.995 MHz. Audio output power:

Internal speaker External speaker Selectivity:

FM FM-N/DV 0.75 W or more at 10% distortion into an 8 load 0.2 W or more at 10% distortion into an 8 load 55 dB or more 50 dB or more 32 174101518281351116391461217BASIC MANUAL 8 SPECIFICATIONS D Receiver Spurious and image rejection ratio:

Squelch Sensitivity:

Ham band Outside Ham band 60 dB or more 0.18 V or less (threshold) Band Frequency range (MHz) FM/FM-N/WFM*1 AM/AM-N*2 BC band 76.000 ~ 108.000 A band B band 108.000 ~ 136.991 137.000 ~ 142.000 142.005 ~ 148.000 148.005 ~ 174.000 375.000 ~ 399.995 400.000 ~ 479.000 137.000 ~ 148.000 148.005 ~ 174.000 375.000 ~ 399.995 400.000 ~ 479.000 1.8 V or less 0.32 V or less 0.32 V or less 0.32 V or less 0.32 V or less 0.32 V or less 0.32 V or less 0.32 V or less 0.32 V or less 0.32 V or less 1 V or less 1 V or less

*1 WFM is for only BC band. FM and FM-N is for only A/B band.

*2 AM-N is for only 108.000 MHz ~ 143.995 MHz. Fuse Coding explanation Fuse Coding Fuse Voltage Rating Fuse Current Rating OPC-254L (Option) FUSE 250V 3A 250 Volts 3 Amperes CP-12L (Option) FUSE 125V 3A 125 Volts 3 Amperes L All stated specifications are typical and subject to change without notice or obligation. 33 BASIC MANUAL MAINTENANCE 9 Resetting Occasionally, erroneous information is displayed when, for example, first applying power. This may be caused externally by static electricity or by other factors. If this problem occurs, perform a Partial reset or an All reset. BE CAREFUL! An All reset clears all programming and returns all settings to the factory defaults. See the Advanced manual for details. After performing an All reset, you cannot use the DR function because the Repeater List contents are also cleared. D Partial Reset

[MENU] > SET > Others > Reset > Partial Reset 1. Push [MENU]. 2. Select Others in the SET menu. 3. Select Reset. 4. Select Partial Reset. The confirmation dialog is displayed. 5. Select YES. PARTIAL RESET is displayed, and then the display automatically returns to the default screen. TIP: A Partial Reset resets the operating settings to their defaults without clearing the following:

Memory Channel contents Scan Edge contents Call sign memories Call Channel contents Message data DTMF memory contents Radio Memory contents GPS memory contents Repeater list 34 174101518281351116391461217BASIC MANUAL 9 MAINTENANCE Troubleshooting The following chart is designed to help you correct problems that are not equipment malfunctions. If you are unable to locate the cause of a problem or solve it through the use of this chart, contact your nearest Icom Dealer or Service Center. L AM indicates the PDF type Advanced Manual. The transceiver does not turn ON. z The battery is exhausted. Frequency cannot be set. z The Key Lock function is activated. Charge the battery pack, or replace Cancel the Key Lock function. (p. the batteries. (p. <?>)

<?>) z Loose the connection of a battery pack z The VFO mode is not selected.

(case). Clean the battery terminals. z The battery polarity in the battery case is reversed. Check the battery polarity in the case. No sound comes from the speaker. z The volume level is too low. Rotate [VOL] to adjust the level. (p.

<?>) z The squelch level is too high. Adjust the squelch level. (p. <?>) z The tone or digital squelch function is turned ON. Turn OFF the function. (AM) z An external speaker is connected to the

[SP] jack. Check the external speaker connection. Sensitivity is too low, and only strong signals are heard. z The coaxial cable is not connected or shorted (External antenna is used). Check the coaxial cable connection or replace it with a new one. z The Attenuator function is turned ON. Turn OFF the attenuator. (p. <?>) No reply is received after a call. z The duplex function is set, the receive and transmit frequencies are different. Set for simplex operation. (AM) z No station is in range or on the same frequency. Wait for a while, and try again. Push [V/MHz] to select the VFO mode. (p. <?>) The displayed frequency is erroneous. z The CPU has malfunctioned. Reset the transceiver. (p. <?>) z External factors have caused a fault. Remove and reattach the battery pack/case. (p. <?>) Unable to transmit. z The transmit power level is set to S-Low, Low1, Low2, or Mid. Set the transmit power level to High.

(p. <?>) z The PTT Lock function is activated. Turn OFF the function on the MENU screen. (p. <?>) z The Busy Lockout function is activated. Turn OFF the function on the MENU screen. (p. <?>) z The transmit frequency is out of the amateur radio band. Set the transmit frequency within the amateur radio band. (p. <?>) A Program Scan does not start. z The VFO mode is not selected. Push [V/MHz] to select the VFO mode. (p. <?>) z The same frequencies are entered into the scan edges. Enter different frequencies into the scan edges. (AM) 35 BASIC MANUAL MAINTENANCE 9 A Memory Scan does not start. z The Memory mode is not selected. Push [MR] to select the Memory mode. (p. <?>) z Only one or no memory channel is entered. Enter two or more memory channels.

(p. <?>) A distorted noise is heard when the earphone is used. z The earphone mode is OFF. Turn ON the earphone mode on the MENU screen. (p. <?>) Unable to charge at power ON. z Charging (Power ON) is set to OFF. Set Charging (Power ON) to ON

(default) on the MENU screen.* (p.

* This operation may generate certain spurious signals, the S-meter appears, or noise may be heard. 36 174101518281351116391461217BASIC MANUAL D-STAR GUIDE for the ID-50A/ID-50E INTRODUCTION INTRODUCTION Unique features of D-STAR Easy Cross band operation through the repeater!

INTERNET INTERNET 430 MHz 430 MHz 1200 MHz 1200 MHz CQCQCQCQ CQCQCQCQ Easy call sign entry with the Repeater list or TX/RX History!

The Call Sign Capture key [RX>CS] makes call sign capture easy!

39 D-STAR GUIDE INTRODUCTION What is D-STAR?

D-STAR is a digital protocol standard developed by the Japan Amateur Radio League

(JARL). The system includes the DV mode for Digital Voice and the DD mode for Digital Data communications. D-STAR supports the DV mode at 4.8 kbps. Your call sign data, and either a short message, or GPS data can be transmitted simultaneously with your voice signal. D-STAR supports a comprehensive repeater system linked through the Internet, enabling you to make QSOs with stations near or far from your location. Advanced Amateur radio technology of D-STAR The DV mode has a bandwidth of only 6 kHz, compared to 16 kHz for the analog FM mode, with 5 kHz deviation. D-STAR utilizes the well-know GMSK modulation method that makes very efficient use of occupied bandwidth. D-STAR (F7W) fo 6 kHz 6 kHz Frequency 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz D-STAR occupies 10 kHz. The sound quality is good even though the bandwidth is narrow. 20 kHz 20 kHz 20 kHz 20 kHz FM (F3E) fo 16 kHz 16 kHz Frequency 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz The regular FM mode occupies 20 kHz that is double the bandwidth of D-STAR. 20 kHz 20 kHz 20 kHz 20 kHz 40 D-STAR GUIDE174101518281351116391461217 INTRODUCTION IMPORTANT! Before starting D-STAR, the following steps are needed. STEP 1. Enter your call sign (MY) into the transceiver. (p. 43) STEP 2. Register your call sign (MY) to a gateway repeater. (p. 45) STEP 3. Enter your D-STAR equipment into your registration form. (p. 46) You have completed the steps!!

About the DR function You can easily use D-STAR repeaters with the D-STAR Repeater (DR) function. With this function, you can select the preset repeater or frequency in FROM (access repeater), and Your call sign in TO (destination) on the DR screen, as shown below. z To display the DR screen, hold down [DR] for 1 second. z On the DR screen, pushing D-pad() selects FROM and pushing D-pad() selects TO. NOTE: If the repeater set in FROM (Access Repeater) has no Gateway, you cannot make a Gateway call. Destination

(Repeaters/Station) Access repeater The DR screen (Example) Ways to Communicate with the DR function With the DR function, the transceiver has 3 ways to communicate. Gateway call:

Local Area call: To call through your local area (access) repeater. You can use an FM repeater. To call through your local area (access) repeater, repeater gateway, and the Internet to your destination repeater or individual stations last used repeater, using Call Sign Routing. To call another station not using a repeater. Simplex call*:

* You can make a simplex call in the VFO mode. (p. 48) 41 D-STAR GUIDE INTRODUCTION Local Area call Access repeater Area 1 repeater Area 1 Gateway call Area 1 repeater Area 1 Area 2 repeater Area 2 Simplex call NOTE:

Using the repeater list is required to use the DR function. (p. 64) Before operating in the Duplex mode, BE SURE to check whether the repeater is busy, or not. If the repeater is busy, wait until it is clear, or ask for a break using a method acceptable to your local procedures. The transceiver has the Time-Out Timer function for the DV Repeater operation. The timer limits a continuous transmission. Warning beeps will sound approximately 30 seconds before timeout and then again immediately before the time-out. 42 D-STAR GUIDE174101518281351116391461217 INTRODUCTION Enter your call sign (MY) into the transceiver To operate D-STAR, you must first enter your call sign into the MY call sign memory. You can enter up to 6 MY call signs. NOTE:

Your MY Call sign must match the call sign registered on a gateway repeater. (p. 45) The MY Call sign in the instructions is ONLY an example that is used in explanations. You MUST enter your own call sign, the one that was assigned to you and is on your license. Example: Enter JA3YUA as your own call sign into MY1. Step 1: Display the MY CALL SIGN edit screen

[MENU] > SET > My Station > My Call Sign 1. Push [MENU]. 2. Select My Station in the SET menu. 3. Select My Call Sign. 4. Select MY call sign memory, then push [QUICK]. (Example: 1:) 5. Select Edit. Displays the MY CALL SIGN edit screen. Step 2: Enter and set your own call sign 1. Enter your own call sign, then push [ENT]. See How to enter characters on the right page. 2. Select the entered call sign, then push [ENT]. Sets the call sign to be used as MY call sign. To exit the MENU screen, push [MENU]. 43 D-STAR GUIDE How to enter characters:

Cancels Moves the cursor to the left INTRODUCTION

[DIAL] (Rotate) Selects a character Selects a character Clears Moves the cursor to the right Opens the Entry Select window*

[ENT]

Sets Selects a character Continuously holding down [CLR] clears characters. Push [QUICK] to display the Entry Mode Select window.*

In the Entry Mode Select window, rotate [DIAL] to select an entry mode, then push [ENT].

* You cannot change the entry mode in the MY CALL SIGN edit screen. TIP: You can enter a note of up to 4 characters, such as the model of the transceiver, name, area name, after your call sign. 1. After entering a call sign, push D-pad() several times until the cursor moves to the right of the /. 2. Enter a 4 character note. (Example: ID50) 44 D-STAR GUIDE174101518281351116391461217 INTRODUCTION Register your call sign at a gateway repeater To make a Gateway call through the Internet, you must register your call sign at a repeater that has a gateway, usually one near you. About the registration process described:

This section describes the call sign registration process at a repeater that is connected to the US Trust server. There are other systems as well, and they have their own registration process. For information on how to register on one of them, contact the administrator of a repeater that uses the alternate system. NOTE: If needed, ask the gateway repeater administrator for call sign registration instructions. Step 1: Access the call sign registration screen 1. Access the following URL to find the gateway repeater closest to you. http://www.dstarusers.org/repeaters.php 2. Click the call sign of the repeater that you want to register to. 3. Click the Gateway Registration URL: link address. 4. The D-STAR Gateway System screen is displayed. Click <Register> to start the New User registration. Click Step 2: Register your call sign 1. Follow the registration instructions found there. 2. When you receive a notification from the administrator, your call sign registration has been approved. NOTE: It may take a few days for the administrator to approve you. 45 D-STAR GUIDE Step 3: Register your personal information After your registration is approved, log in your personal account with your registered call sign and password. INTRODUCTION Click Step 4: Register your D-Star equipment 1. Register your D-STAR equipment information. Ask the gateway repeater administrator for details. 2. When your registration is complete, log out of your personal account, and start using the D-STAR network. NOTE: You must register your D-STAR equipment BEFORE you make Gateway Repeater calls. 46 D-STAR GUIDE174101518281351116391461217 D-STAR OPERATION Making a Simplex call This section describes the simplex operation (through no repeater). NOTE: The frequencies may be different, depending on the transceivers version. Check for usable frequencies for your operating area. What is a Simplex Call?

A simplex call is a direct call to another station on a single frequency, not using a repeater. Example: Making a simplex call on 445.670 MHz. Step 1: Set FROM (Simplex channel). 1. Push D-pad() to select FROM, and then push [ENT]. 2. Select Repeater List. 3. Select a Simplex group. 4. Select a frequency. Returns to the DR screen, and the selected frequency is displayed in FROM. CQCQCQ is displayed in TO. If a station call sign is set in TO, select Local CQ in the TO SELECT screen. Step 2: Hold down [PTT] to transmit. 1. Hold down [PTT] to transmit. The TX/RX indicator lights red while transmitting. 2. Release [PTT] to receive. TIP: You can change the simplex frequencies on the MENU screen.

([MENU] > MEMORY > Repeater List) See the Advanced manual for details. 47 D-STAR GUIDE D-STAR OPERATION To make a Simplex call in the VFO mode 1. Push [V/MHz] to enter the VFO mode. 2. Rotate [DIAL] to set the operating frequency. (p. 16) 3. Push [MODE] to set the operating mode to DV. 4. Hold down [LO] for 1 second to set an output power. (p. 20) 5. Hold down [PTT] to transmit, and speak into the microphone at your normal voice level. The TX/RX indicator lights red while transmitting. The S/RF meter displays the output power level. 6. Release [PTT] to receive. If you enter a DV simplex frequency to a Memory channel, you can also make a simplex call in the Memory mode. See page 23 on how to enter Memory channels. 48 D-STAR GUIDE174101518281351116391461217 D-STAR OPERATION Accessing repeaters This section describes how to check whether or not you can access your local area repeater (access repeater), and your signal is successfully sent to a destination repeater. TIP: If your call sign (MY) has not been set, or your call sign and D-STAR equipment have not been registered at a D-STAR repeater, see pages 43 ~ 46. Step 1: Set FROM (Access repeater). 1. Push D-pad() to select FROM, and then push [ENT]. 2. Select Repeater List. 3. Select the repeater group where your access repeater is listed. 4. Select your access repeater. Returns to the DR screen, and the selected repeater name is displayed in FROM. By just selecting the repeater name, the repeater call sign, its frequency, duplex setting, and frequency offset are automatically set. A repeater list here is just an example. TIP: There are several ways to set your access repeater. (p. 61) Setting by [DIAL]

Searching for a repeater using the DR scan Searching for the nearest repeater Setting from the TX History Step 2: Set TO (Destination). 1. Push D-pad() to select TO, and then push [ENT]. 2. Select Gateway CQ. 3. Select the repeater group where your destination repeater is listed. 4. Select your destination repeater. Returns to the DR screen, and the selected repeater name is displayed in FROM. 49 D-STAR GUIDE D-STAR OPERATION Step 3: Check whether you can access the repeater. Hold down [PTT] for 1 second to access the repeater. If you get a reply call, or UR? is displayed within 3 seconds, your signal reached your access repeater and your call was successfully sent from your destination repeater. TIP: See page 63 for status indications after a reply is received. Successfully sent!

50 D-STAR GUIDE174101518281351116391461217 D-STAR OPERATION Receiving When a DV call is received, the call signs of the caller, the called station, and the called stations access repeater are saved in the RX History. Up to 50 calls can be saved. Even if you turn OFF the transceiver, the RX History is retained. This section describes how to display the RX History screen and how to save the call sign to your memory. When receiving a call from JM1ZLK:

The S-meter and the callers call sign are displayed. Step 1: Display a received call sign. 1. Hold down [CD] for 1 second. Displays the RX HISTORY screen. 2. Push D-pad(). Displays other RX history records. RX HISTORY screen (LAST(MAIN)) Record number Displayed when position data is received. Caller station*

Called station RX message Received repeater name, or frequency Received date and time

* The caller name is displayed when the name is set in the Your Call Sign list. Push [QUICK] to switch between name display and call sign display.

/ and a note may be displayed after the call sign. If a call is received from an area, not from a specific station, CQCQCQ is displayed. 51 D-STAR GUIDE Step 2: Save the destination call sign into your call sign memory from RX History. 1. Push D-pad() to select the RX HISTORY record with the call sign that you want to D-STAR OPERATION save to memory. 2. Push [ENT]. Displays the RX HISTORY DETAIL screen. 3. Push [QUICK]. 4. Select Add To Your Memory. 5. Select the call sign that you want to save. 6. Select NAME. 7. Enter a name of up to 16 characters, then push [ENT]. Usable characters are A to Z, a to z, 0 to 9, ! # $ % & ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _

` { | } (space). See How to enter characters. (p. 44) 8. Select <<Add Write>>. The confirmation dialog Add write? is displayed. 9. Select YES. The call sign is added to your memory, and returns to the RX HISTORY screen. To exit the screen, push [MENU]. 52 D-STAR GUIDE174101518281351116391461217 D-STAR OPERATION Capturing a call sign After you receive a signal, the calling stations call sign can be captured by holding down the Call Sign Capture key ([RXCS]) for 1 second. After releasing, you can quickly and easily reply to the call. What is the Call Sign Capture key?

Holding down the Call Sign Capture key for 1 second sets the last received stations call sign as a temporary destination, and makes replying quick and easy. Step 1: Set the received call sign to TO (Destination). While receiving, hold down [RXCS] for 1 second. After releasing the key, the transceiver announces the station call sign, and the call sign is captured. Information If you want to select another call sign in the RX History, rotate [DIAL] while holding down

[RXCS]. You can change the setting of the [RXCS] key on the MENU screen. If [RXCS] Key is set to RX > CS List, the received call sign is not captured. The RX History list is displayed instead. ([MENU] > SET > DV Set > [RX>CS] Key) When a received signal is weak, or during a DV scan, the call sign may not be correctly received. In that case, you cannot capture the call sign. When RX > CS SPEECH is set to OFF, the transceiver does not announce the call sign.

(MENU > SET > SPEECH > RX > CS SPEECH) Captured!

While holding down After releasing

[RXCS]

Step 2: Hold down [PTT] to transmit. 1. Hold down [PTT] to transmit. The TX/RX indicator lights red while transmitting. 2. Release [PTT] to receive. Push [RXCS] to return to the previous call sign setting. 53 D-STAR GUIDE D-STAR OPERATION Making a Local CQ call You can make a Local CQ call when Local CQ is set to TO (Destination). What is a Local CQ Call?

To call a CQ through only your local area (access) repeater. Step 1: Set FROM (Access repeater). 1. Push D-pad() to select FROM, and then push [ENT]. 2. Select Repeater List. 3. Select the repeater group where your access repeater is listed. 4. Select your access repeater. Returns to the DR screen, and the selected repeater name is displayed in FROM. Step 2: Set TO (Destination). 1. Push D-pad() to select TO, and then push [ENT]. 2. Select Local CQ. Returns to the DR screen, and CQCQCQ is displayed in TO. Step 3: Hold down [PTT] to transmit. 1. Hold down [PTT] to transmit. The TX/RX indicator lights red while transmitting. 2. Release [PTT] to receive. TIP: The Local CQ call is used to call anyone, but you can call a specific station by simply saying their call sign. 54 D-STAR GUIDE174101518281351116391461217 D-STAR OPERATION Making a Gateway CQ call You can make a Gateway CQ call when a destination repeater is selected in TO

(Destination). What is a Gateway CQ call?

To call a CQ through a repeater connected to the Internet. You can call a CQ to the areas where you cannot directly access because the communication is routed through the Internet. Step 1: Set FROM (Access repeater). Same as described in page 54. Step 2: Set TO (Destination). 1. Push D-pad() to select TO, and then push [ENT]. 2. Select Gateway CQ. 3. Select the repeater group where your destination repeater is listed. 4. Select your destination repeater. Returns to the DR screen, and the selected repeater name is displayed in TO. Step 3: Hold down [PTT] to transmit. 1. Hold down [PTT] to transmit. The TX/RX indicator lights red while transmitting. 2. Release [PTT] to receive. NOTE: If the selected Access repeater does not connect to the gateway, displayed. In that case, you cannot select Gateway CQ. is 55 D-STAR GUIDE D-STAR OPERATION Calling an individual station You can make a call to an individual station when the station call sign is selected in TO

(Destination). When you call an individual station through a gateway, your call is automatically sent to the last repeater that the station accessed. So, even if you dont know where the station is, you can make a call using Call Sign Routing. Step 1: Set FROM (Access repeater). Same as described in page 54. Step 2: Set TO (Destination). 1. Push D-pad() to select TO, and then push [ENT]. 2. Select Your Call Sign. 3. Select your destination station. Returns to the DR screen, and the selected station name is displayed in TO. Step 3: Hold down [PTT] to transmit. 1. Hold down [PTT] to transmit. The TX/RX indicator lights red while transmitting. 2. Release [PTT] to receive. 56 D-STAR GUIDE174101518281351116391461217 D-STAR OPERATION About reflectors D What is a reflector?

A reflector is a special server connected to the Internet and running a version of the D-Plus software. If the D-Plus software is installed on your Access repeater, it provides various functions including gateway and reflector linking capabilities (It is known as the D-STAR reflector system). The D-STAR reflector system enables a number of D-STAR repeaters anywhere to link to a reflector. This means that when you transmit through a D-STAR repeater linked to a reflector, your voice can be heard on other repeaters linked to the reflector, and you can hear other stations that are connected to the reflector. D-STAR reflector system Reflector Access repeater USA UK CAN AUS D Unlinking a reflector Before trying to link to another reflector, BE SURE to unlink the reflector that is currently connected to the repeater. NOTE: If a reflector is already connected, ask on the air whether or not you can change reflectors and wait for responses. BE SURE to reconnect back to the same reflector when you finish your conversation. 1. Push D-pad() to select TO, and then push [ENT]. 2. Select Reflector. 3. Select Unlink Reflector. Returns to the DR screen, and Unlink Reflector and U are displayed in TO. 4. Hold down [PTT] to unlink the reflector. The TX/RX indicator lights red. 57 D-STAR GUIDE D-STAR OPERATION D Linking to a reflector If your repeater is not currently linked to a reflector, or if you want to change it to another reflector, follow the steps below. Before linking to another reflector, BE SURE to unlink the current reflector. (p. 57) Direct inputting a reflector Example: Directly enter REF030CL. 1. Push D-pad() to select TO, and then push [ENT]. 2. Select Reflector. 3. Select Link to Reflector. 4. Select Direct Input. 5. Push D-pad() to move the cursor, and rotate [DIAL] to select the reflector type, reflector number, or module letter. 6. Push [ENT]. Returns to the DR screen, and Link to Reflector and entered reflector are displayed in TO. 7. Hold down [PTT] to link to the reflector. The TX/RX indicator lights red. Using the TX History The TX History saves up to 5 reflectors that your Access repeater linked before. Example: Select the REF030CL in the TX History. 1. Push D-pad() to select TO, and then push [ENT]. 2. Select Reflector. 3. Select Link to Reflector. 4. Select the reflector that you want to link to. Returns to the DR screen, and Link to Reflector and REF030CL are displayed in TO. 5. Hold down [PTT] to link to the reflector. The TX/RX indicator lights red. 58 D-STAR GUIDE174101518281351116391461217 D-STAR OPERATION About reflectors D Using a reflector 1. Push D-pad() to select TO, and then push [ENT]. 2. Select Reflector. 3. Select Use Reflector. Returns to the DR screen, and Use Reflector and CQCQCQ are displayed in TO. 4. Hold down [PTT] to transmit. The TX/RX indicator lights red. 5. Release [PTT] to receive. 59 D-STAR GUIDE D-STAR OPERATION D Reflector Echo Testing To confirm that your signal is correctly getting into the repeater, you can transmit a short message as a trial. After releasing [PTT], your message will be played back. 1. Push D-pad() to select TO, and then push [ENT]. 2. Select Reflector. 3. Select Echo Test. Returns to the DR screen, and Echo Test and E are displayed in TO. 4. Hold down [PTT] and speak into the microphone. The TX/RX indicator lights red. 5. Release [PTT] to hear your message. D Requesting repeater information When you send the repeater information command, an ID message is sent back. 1. Push D-pad() to select TO, and then push [ENT]. 2. Select Reflector. 3. Select Repeater Information. Returns to the DR screen, and Repeater Information and I are displayed in TO. 4. Hold down [PTT] to transmit the repeater information command. The TX/RX indicator lights red. 5. Release [PTT] to hear the repeater ID message. 60 D-STAR GUIDE174101518281351116391461217 D-STAR OPERATION FROM (Access repeater) setting By rotating [DIAL]:

Select a preset repeater by rotating [DIAL] on the DR screen. When you know your access repeater:

From the repeater list:

When your access repeater is in your transceivers repeater list, you can select it by selecting the repeater area and name, if entered, or call sign. When you do not know which repeater you can access:

Search for a repeater using the DR scan:

The Normal DR scan searches for output repeater frequencies or simplex signals. You can also find FM repeaters. Search for the nearest repeater:

The transceiver searches for the nearest repeater by using your location and the repeaters location, if it is entered in the Repeater List. The nearest repeaters in your transceivers Repeater List are displayed as selectable choices. You can select a nearby DV or FM repeater type. When the FROM data is saved in the TX History:

Select from the TX History:

Select a repeater that you have accessed before, from the TX History record. 61 D-STAR GUIDE D-STAR OPERATION TO (Destination) setting By rotating [DIAL]:

Select a repeater or Your Call Sign that is displayed by rotating [DIAL] on the DR screen. (This operation is disabled when CQCQCQ is set.) TIP: After you receive the individual station or repeaters signal, the call sign can be captured by holding down the Call Sign Capture key ([RXCS]), and you can quickly and easily reply to a call. To make a Local Area CQ call:

Set CQCQCQ in TO (Destination). To make a Gateway CQ call:

Select a repeater from the repeater list, if you want to make a Gateway call. To make a call to a specific station:

Select the station call sign in the Your Call Sign. To make a call through a reflector:

Select a reflector that is connected to the repeater you want to call through. To select from RX History:

When you receive a call, the caller station data is saved in RX History. You can select the destination from the record. To select from TX History:

When you make a call, the destination repeater or called station data is saved in TX History. You can select the destination from the record. To directly enter the destination station call sign:

Directly enter the destination stations call sign. To directly enter the destination repeater call sign:

Directly enter the destination repeaters call sign. 62 D-STAR GUIDE174101518281351116391461217 D-STAR OPERATION When receiving no reply To communicate through the repeater, your signal must access to the repeater. The following chart is designed to help you correct problems which are not equipment malfunctions. AM indicates the PDF type Advanced manual. PROBLEM POSSIBLE CAUSE SOLUTION After your call, the repeater does not return a status reply. The repeater setting is wrong. Select the correct repeater. Correct the repeater frequency, frequency offset, or duplex settings. Your transmission did not reach the repeater. Wait until you are closer to the repeater and try again. After your call, the repeater replies UR?

and its call sign. The call was successfully sent, but no station immediately replied. Try to access another repeater. Wait for a while, and try again. Set your own call sign (MY). Register your own call sign

(MY) on a gateway repeater, or confirm the registration of the call sign. Correctly set the destination repeater call sign. Your own call sign (MY) has not been set. Your own call sign (MY) has not been registered on a gateway repeater, or the registered contents do not match your transceivers settings. The call sign of the destination repeater is wrong. The repeater cannot connect to the destination repeater. The repeater is busy. Check the repeater settings. Wait for a while, and try it again. There is no repeater list in your transceiver. Import the repeater using a microSD card. The Lock function is activated. Directly enter the Repeater list data into the transceiver. Hold down [

second to turn OFF the Lock function.

] for 1 p. 64 AM p. 20 REF. p. 49 p. 43 p. 45 After your call, the repeater replies RX or RPT? and the access repeaters call sign. After your call, the repeater replies RPT? and the access repeaters call sign. After your call, the repeater replies RPT?

and the destination repeaters call sign. Even holding down

[DR], the DR screen is not displayed. 63 D-STAR GUIDE PROBLEM POSSIBLE CAUSE SOLUTION REF. D-STAR OPERATION Even holding down

[RXCS], the received call sign will not set to the destination call sign. A Local area call can be made, but the Gateway call or destination station call cannot be made. L is displayed on the LCD. The call sign has not been correctly received. When a received signal is weak, or a signal is received during scanning, the call sign may not be received correctly. In that case, ----

---- is displayed and error beeps sound, and a reply call cannot be made. MY call sign has not been registered on a D-STAR repeater. The repeater set in FROM

(Access Repeater) has no Gateway. While receiving through the internet, some packets may be lost due to network error (poor data throughput performance). DV and FM icons alternately blink. While in the DV mode, an FM signal is received. Try it again, after the transceiver has correctly received the call sign. Register your own call sign

(MY) on a gateway repeater, or confirm the registration of the call sign. Check the repeater settings. Wait a while, and try it again. When the transceiver receives corrupted data, and misidentifies it is as packet loss, L is displayed, even if it is a Local area call. Use a different operating frequency until there are no FM signals on the original frequency. See the Automatic DV detection on the Advanced manual. p. 45 AM Updating the repeater list For easy operation, a repeater list is preloaded into your transceiver. You can download the repeater list from the Icom website. NOTE:

Before using a microSD card, see page 25 for details of a card. See Updating the repeater list that can be downloaded from the Icom website about how to update the repeater list using a microSD card. https://www.icomjapan.com/support/

64 D-STAR GUIDE174101518281351116391461217 INDEX INDEX 1 MHz tuning 16 A A band 11 Accessories ii Access Point mode v Access repeater 51 AM 15 AM-N 15 Attenuator (ATT) 4, 16 Audio level 7 Auto Position Reply functionvi Auto Power OFF icon 4, 22 B Band Select 15 Battery icon 6 Battery pack Attaching 5 Charging 6 B band 11 BK 4 Bluetooth Connecting 32 Deleting 33 Disconnecting 33 icon 3 Pairing 32 Turning ON 31 Call C Gateway 44, 57 Individual station 58 Local 44, 56 Simplex 19, 44, 49 Call Channel mode 14 CALL key 2 Call sign 45 Call Sign Capture key 55 CD key 1 Character How to enter 46 Charging 6 CLR key 2 D DC IN jack 2, 6 Default setting 22 DIAL 2 DOC ii DR function 14, 43 DR key 2 D-STAR 40 Dual band display 3, 11 DUAL key 2, 11 Dualwatch 11 DV 15 DV Gateway function v E Echo Test 62 EMR 4 F FCC ii FM 15 FM-N 15 FM Radio 20 FROM 63 G Gateway call 44, 57 GPS 10, 29 GPS Alarm icon 3 GPS Logger function 30 GPS POSITION screen 29 GPS receiver iv H Home Channel function 18 L L 4 Link to Reflector 60 Local call 44, 56 Lock function 20 LO key 2 M MAIN band11 MAIN key 2, 11 Memory channel Entering 23 Selecting 24 Memory mode 14 MEMORY screen 24 65 BASIC MANUAL INDEX S Save Setting 9 SCAN key 1 Scan operation 17 Screen Capture 1 SD card Formatting 8 Inserting 7 Removing 28 Share Pictures function vi, 3 Simplex 19, 49 Simplex call 44 Single band display 3, 11 SPCH key 2 Specifications 34 Speech function 17 SQL key 1 Squelch 12 S/RF meter 4 T Terminal mode v TO 64 Transmit power level 20 Transmitting 19 Troubleshooting 38 Troubleshooting, DR 65 Tuning step 16 Turning ON 7 U Unlink Reflector 59 UR? 52, 65 USB COM 3 USB port 2 Use Reflector 61 V VFO/MHz key 2 VFO mode 14 VOL 2 VOX 3 W Weather Channel mode 14 MENU List 71 MENU key 1 MENU screen 21 Operation 21 Selecting a item 22 microSD card Formatting 8 Inserting 7 Removing 28 MIC/SP jack 2 MODE key 1 Monitor function 12 MR key 2 MW key 2, 23 My Call Sign 45 N Near Repeater search functionvi, 63 O Operating mode 15 P Pairing/Connect 32 Partial Reset 37 Playing a recorded audio 27 PTT switch 1 Q QUICK key 2 Quick Menu window 13 R Radio 20 Receiving 11 Receiving, DR 53 Recording a QSO audio 27 Reflector 59 Echo Testing 62 Linking 60 Requesting repeater information 62 Unlinking 59 Using 61 Repeater Information 62 Repeater list 66 Resetting 37 RPT? 65 RX 65 RXCS key 2, 55 RX history 53 66 BASIC MANUAL174101518281351116391461217 ABOUT THE LICENSES mbed TLS Apache License Version 2.0, January 2004 http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. License shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. Licensor shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. Legal Entity shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, control means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent

(50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. You (or Your) shall mean an individual or Legal Entity exercising permissions granted by this License. Source form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. Object form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. Work shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). Derivative Works shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. Contribution shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, submitted means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as Not a Contribution. Contributor shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. 2. 3. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and

(b) You must cause any modified files to carry prominent notices stating that You changed the files; and

(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and 67 BASIC MANUAL

(d) If the Work includes a NOTICE text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. 5. 6. 7. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work

(and each Contributor provides its Contributions) on an AS IS BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. ABOUT THE LICENSES 8. 9. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work. To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets [] replaced with your own identifying information.

(Dont include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same printed page as the copyright notice for easier identification within third-party archives. Copyright 2016, Arthur Teplitzki 2013, Edmodo, Inc. Licensed under the Apache License, Version 2.0 (the License);

you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an AS IS BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. 68 BASIC MANUAL174101518281351116391461217 MENU SCREEN ITEMS When pushing [MENU], the following MENU items are displayed. Refer to the Advanced manual for each menu items details. SCOPE CD DV GW

<<Terminal Mode>>

<<Access Point Mode>>

PICTURE GPS GPS Set GPS Select GPS Option SBAS GLONASS Power Save Satellite Information Out Manual Position GPS Out (USB Port) GPS TX Mode OFF D-PRS NMEA GPS Information GPS Position GPS Memory GPS Alarm Alarm Select Alarm Area (Group) Alarm Area (RX/Memory) GPS Logger GPS Logger Record Interval Record Sentence

<<GPS Logger Only>>

GPS Auto TX VOICE Record TX Set Repeat Time TX Monitor

<<Single TX>>

<<Repeat TX>>

RECORD QSO Recorder

<<REC Start>>

Play Files Recorder Set RX REC Condition File Split PTT Auto REC Player Set Skip Time Voice Recorder Record Play Files Recorder Set MIC Gain Player Set Skip Time DV Auto Reply FM RADIO FM Radio Memory FM Radio Set Auto Mute Earphone Antenna Power Save (FM Radio)

<<FM Radio ON>>

<<FM Radio Mode>>

69 BASIC MANUAL SET > DUP/TONE... Offset Freq Repeater Tone TSQL Freq Tone Burst DTCS Code DTCS Polarity Digital Code SET > Scan Pause Timer Resume Timer Temporary Skip Timer Program Skip Group Link P-Scan Edge Program Link DUP Check During MR Scan SET > Scope Scope Mode Waterfall Function Waterfall Speed FIX Mode Center Frequency AF Output (DUAL/AIR Band) SET > Call Sign SET > My Station My Call Sign TX Message MENU SCREEN ITEMS SET > DV Set Tone Control RX Bass RX Treble RX Bass Boost TX Bass TX Treble Auto Reply DV Data TX DV Fast Data Fast Data GPS Data Speed TX Delay (PTT) Digital Monitor Digital Repeater Set DV Auto Detect RX Record (RPT)

[RX>CS] Key BK EMR EMR AF Level SET > SPEECH RX Call Sign SPEECH RX>CS SPEECH DIAL SPEECH MODE SPEECH SPEECH Language Alphabet SPEECH Speed SPEECH Level SET > DTMF/T-CALL DTMF Memory DTMF Speed SET > QSO/RX Log QSO Log RX History Log CSV Format Separator/Decimal Date 70 BASIC MANUAL174101518281351116391461217 SET > Display Backlight Backlight Timer Brightness Contrast Busy LED RX Call Sign RX Position Indicator RX Position Display RX Position Display Timer Reply Position Display RX Picture Indicator DV RX Backlight TX Call Sign Scroll Speed Opening Message Voltage (Power ON) Single Band Display Display Unit Latitude/Longitude Altitude/Distance Speed Temperature Barometric Rainfall Wind Speed Display Language*2 System Language MENU SCREEN ITEMS SET > Function Power Save Monitor Dial Speed-UP Auto Repeater*1 Remote MIC Key During RX/Standby During TX Key Lock PTT Lock Busy Lockout Time-Out Timer Active Band MIC Gain (Internal) MIC Gain (External) VOX VOX VOX Level VOX Delay VOX Time-Out Timer Headset Select CI-V CI-V Address CI-V Baud Rate (SP Jack) CI-V Transceive CI-V USBREMOTE Transceive Address USB Connect USB Serialport Function Heterodyne Battery Pack Select Battery Pack Confirmation Charging (Power ON) USB Power Input (Phone, Tablet, PC) Screen Capture [PWR] Key LO/CALL Key Actions

*1 May be displayed depending on the transceiver version.

*2 Displayed only when System Language is set to Japanese. 71 BASIC MANUAL SET > Sounds Volume Select FM Radio Level Earphone Mode Beep Level Beep/Vol Level Link Key-Touch Beep Home CH Beep Band Edge Beep Scan Stop Beep Standby Beep Sub Band Mute SET > Time Set Date/Time GPS Time Correct UTC Offset Auto Power OFF SET > SD Card Load Setting Save Setting Import/Export Import Export CSV Format SD Card Info Screen Capture View Firmware Update Format Unmount MENU SCREEN ITEMS SET > Others Information Voltage Version Clone Clone Mode Reset Partial Reset All Reset MEMORY Memory CH Call CH Your Call Sign Repeater List 72 BASIC MANUAL174101518281351116391461217 MEMO MEMO174101518281351116391461217 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, JapanA7747D-1EXPrinted in Japan 2023 Icom Inc. Apr. 2023How the World Communicates

#15 I R E V E C S N A R T F H U F H V

VHF/UHF TRANSCEIVER ID-50A D9610052120 Corrugated Recycles A 0 5

D I I D

5 0 A FEDERAL LAW. SIGNALS IS PROHIBITED UNDER FCC RULES AND RECEIVE CELLULAR RADIOTELEPHONE SERVICE WARNING: MODIFICATION OF THIS DEVICE TO does not cause harmful interference. Operation is subject to the condition that this device This device complies with part 15 of the FCC Rules. VHF/UHF TRANSCEIVER ID-50A

V H F U H F T R A N S C E V E R I 4389 DECORATION BOX (50A) 2023/4/5

O -ID-

ICOM Model: ID-50A FCC ID: AFJ438900 IC: 202D-438900 HVIN: 438900-01 Icom Inc. MADE IN JAPAN SERIALNO. QQOOOOOO C25065 o/

wt HL 20200000 ON Twiuas |

Nvdvr NI JOVI Sul Woo]

LO-O068P :NIAH 0068EF-0202 :DI oo6strrav :dil 994 VOS-dI :|SPOW

Icom Inc. 1-6-19,Kamikuratsukuri,Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax: +81 6 6793 3336 e-mail: world_support@icom.co.jp URL : http:/Awww.icom.co.jp/world Date: April 26, 2023 To Whom It May Concern Subject: Authority to Act as an Agent Applicant: Icom Incorporated Product: VHF/UHF Amateur portable transceiver Model: ID-50A FCC ID: AFJ438900

Dear Sir/Madam, We hereby appoint Compliance Testing, LLC to act as our agent in preparation of this application for authorization of above equipment under F.C.C. Rules. We hereby certify that neither the application nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CRF 1.2002(b) for the definition of a party for these purposes. We also certify that the information provided, property describe the device or system for which authorization is required. Best regards Icom Incorporated Atsushi Tomiyama i General Manager of Quality Assurance Department < Ler Aifar

Icom Inc. 1-6-19,Kamikuratsukuri,Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax: +81 6 6793 3336 e-mail: world_support@icom.co.jp URL : http:/Avwww.icom.co.jpAworld Date: April 26, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Attestation Statements Parts 2.911(d)(5)(i) and 2.911(d)(5)(ii) Filing Applicant: Icom Inc Product: VHF/UHF Amateur portable transceiver Model: , ID-50A , FCC ID: AFJ438900 Attestation for 47 CFR section 2.911(d)(5)(i) Icom Inc, (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Attestation for 47 CFR section 2.911(d)(5)(ii) Icom Inc, (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Icom Inc Atsushi Tomiyama General Manager of Quality Assurance Department

0 ICOM lcom Inc. 1-6-19,Kamikuratsukuri,Hir ano-ku, Osaka Japan. Phone: +81 6 6793 8424 Fax: +81 6 6793 3336 e-mail:

URL: http://www.icom.eo.jp/world world_support@icom.co.jp Date: April 26, 2023 To Whom It May Concern Subject:

Scanning Receiver Statement Applicant:

Product:

Model:

FCCID:

lcom Incorporated VHF/UHF Amateur ID-50A AFJ438900 portable transceiver The equipment Commission's rules applies. under application herin incorporates a scanning receiver

.. Accordin gly, 15.121 of the underapplication The equipment user to operate within the frequency Telecommunications Service ("Cellular The equipment is also incapable Radio Service"). herein is incapable of operating bands allocated

(tuning), to the Domestic by the Radio Public cellular or being readily altered of converting digital cellular transmissions to analog voice audio. The receiver portion 225.000-479.000MHz, and 869-894MHz. of the equipment the receiver under application herein scans 76.000-108.000, 108.000-17 does not scan the bands used by the Cellular Radio Service, 4.000, 824-849 portion of the equipment bands by means of clipping The receiver Radio Service other such simple component. replacing a plug-in that are utilized semiconductor in the equipment under application the leads of or installing cannot be altered a diode, to enable it to scan the Cellular resistor be made to scan the Cellular chips are utilized. and/or Radio Service jumper wire, or bans by The semiconductor-chips Nor can the receiver chip, since no such plug-in cannot be erased and reprogrammed. The radio design of the tuning, from the firmware part of the internal Since the processor circuitry modifying without control and filtering on the receiver is controlled circuitry which is built-in by the microprocessor by the serial manufacture data as a code in the microprocessor, design of the processor. information is inaccessible to the user (Even lcom peoples), if someone attempt the knowledge of the firmware code, the radio simply will fail to operate. In view of the-above, the equipment complies with 15.121 of the Commission rules. Sincerely lcom Incorporated Atsushi General Tomiyama Manager of Quality Assurance Department

0 ICOM lcomlnc. 1-6-19,Kamikuratsukuri,Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax : +81 6 6793 3336 e-mail:

wortd_support@icom.co.jp URL: http://www.icom.eo.jp/wortd Date: April 26, 2023 To Whom It May Concern Subject:

Confidentiality Letter Applicant:

FCCID:

lcom Incorporated AFJ438900 Dear Sir/Madam:

I The applicant certification be withheld would like to request the following disclosure documents as per Section submitted 0.457 & 0.459 of FCC Rules. with this application for from public Confidential Description 1.Operational 2.Block Diagram 3.Schematics 4.Parts List Short-Term Confidential 6.External 7. Internal 8.Users Manual Photos Photos for 120 days contain The above materials to the public. released and provide applicant pursuant to Section documentation trade secrets The public disclosure benefits 0.457 of the Rules, disclosure unjustified shall not be made. and proprietary information not customarily of these materials to its competitors. The applicant of this application may be harmfulto understands and all accompanying the that Regards Atsushi General Tomiyama Manager of Quality Assurance Department

For USA Only Suppliers Declaration of Conformity 47 CFR 2.1077 Compliance Information Unique Identifier:

Trade Name Model Name:

Responsible party:

Company name Address

ICOM ID-50A Icom America Inc. 12421 Willows Road NE Kirkland, WA 98034 U.S. Contact Information: 800-USA-ICOM (800-872-4266) Monday - Friday 7AM to 5PM PST FCC Compliance Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.