FCC ID: AFJ418001 Two Way Radio

(oe) ICOM unstructions IP ADVANCED RADIO SYSTEM IP730D IP740D Thank you for choosing this Icom product. READ ALL INSTRUCTIONS carefully and completely before using this product. IMPORTANT This instruction sheet includes some functions that are usable only when they are preset by your dealer. The transceiver may have other functions and operations that are not described in this instruction sheet. Ask your dealer tor preset function details, For Advanced features and instructions, see the INSTRUCTION MANUAL on the Icom website for details. https:/www.icomjapan.com/support!

Icom is not responsible for the destruction, damage fo, or performance of any Icom or non-Icom equipment, if the Malfunction is because of:

+ Force majeure, including, but not limited to, fires, earthquakes, storms, floods, lightning, other natural disasters, disturbances, riots, war, or radioactive contamination.

+ The use of Icom transceivers with any equipment that is not manufactured or approved by Icom. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries. AquaQuake is a trademark of com Incorporated AMBE+2 is a trademark and property of Digital Voice Systems Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Icom Inc. is under license. All other products or brands are registered trademarks or trademarks of their respective holders. Count on us!

AT605W-1EX-2 Printed in Japan 2020 Icom inc. Icom Inc. 11-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan Aug. 2020 FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION: Changes or modifications to this transceiver, not expressly approved by Icom Inc., could void your authority to operate this transceiver under FCC Tegulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that his device does not cause harmful interference. SAFETY TRAINING INFORMATION Your Icom radio generates RF electromagnetic energy while transmitting. This radio is designed for and classified as for Occupational Use Only. This means it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the General Population in an uncontrolled environment. This radio has been tested and complies with the FCC and IC RF exposure limits for Occupational Use Only. In addition, your Icom radio complies with the following Standards and Guidelines with Tegard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:

WARNING

+ FCC KDB Publication 447498 D03, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.

+ American National Standards Institute (C95.1-2010), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.

+ American National Standards Institute (C95.3-2002), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields RF and Microwave.

+ The antennas, batteries, belt clips, speaker-microphone, and other accessories that are listed in OPTIONS on this sheet, are authorized for use with this product. Use of accessories other than those specified may result in RF exposure levels exceeding the FCC and IC requirements for wireless RF exposure.

+ Health Canada Safety Code 6 - Limits of Human Exposure to Electromagnetic Energy in the Frequency Range from 3 kHz to 300 GHz. EXPLICIT DEFINITIONS WORD DEFINITION ZXDANGER! [Personal death, serious injury or an lexplosion may occur. ZXWARNING! [Personal injury, fire hazard or electric

[shock may occur. CAUTION _| Equipment damage may occur, NOTE _|If disregarded, inconvenience only. No Fisk of personal injury, fire or electric

[shock PRECAUTIONS

\ DANGER! NEVER operate the transceiver near unshielded electrical blasting caps or in an explosive atmosphere. This could cause an explosion and death 4\ WARNING! NEVER use or charge Icom battery packs with non-Icom transceivers or non-Icom chargers. Only Icom battery packs are tested and approved for use with Icom transceivers or charged with Icom chargers. Using third-party or counterfeit battery packs or chargers may cause smoke, fire, or cause the battery to burst.

\ WARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting 4\ WARNING! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. The continuous high volume operation may cause a ringing in your ears. If you experience the ringing, reduce the volume level or discontinue use.

\ WARNING! NEVER operate the transceiver while driving a vehicle. Safe driving requires your full attention anything less could result in an accident. CAUTION: DO NOT short the terminals of the battery pack. Shorting may occur if the terminals touch metal objects such as a key, so be careful when placing the battery packs (or the transceiver) in bags, and so on. Carry hem so that shorting cannot occur with metal objects. Shorting may damage not only the battery pack, but also the transceiver. CAUTION: DO NOT use harsh solvents such as Benzine or alcohol when cleaning. This could damage the equipment surfaces. If the surface becomes dusty or dirty, wipe it clean wih a soft, dry cloth CAUTION: DO NOT place or leave the transceiver in excessively dusty environments. This could damage the transceiver. NOTE: DO NOT place or leave the transceiver in areas with temperatures below -30C (-22F) or above +60C

(#140F), or in areas subject to direct sunlight, such as the dashboard. BE CAREFUL! The transceiver meets IP67* requirements for dust tight and waterproof protection. However, once the transceiver has been dropped, dust tight and waterproof protection cannot be guaranteed due to the fact that the transceiver may be cracked, or the waterproof seal damaged, and so on.

* Only when the connector cover, or the optional speaker microphone is attached To ensure that your expose to RF electromagnetic energy is within the FCC and IC allowable limits for occupational use, always adhere to the following guidelines:

CAUTION

+ DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed FCC and IC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio. DO NOT transmit for more than 50% of the total radio use time ("50% duty cycle"). Transmitting more than 50% of the time can cause FCC and IC RF exposure compliance requirements to be exceeded. The radio is transmitting when the status indicator lights red. You can cause the radio to transmit by pushing the [PTT] switch. ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting, and only use the Icom belt-clips listed in OPTIONS on this sheet when attaching the radio to your belt, or other piace, to ensure FCC and IC RF exposure compliance requirements are not exceeded. The information listed above provides he user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio. operates within the FCC and IC RF exposure limits of this radio,

+ Electromagnetic Interference/Compatibility During transmissions, your Icom radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, tum off the radio in areas where signs are posted to do so. DO NOT operate he transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

+ Occupational/Controlied Use The radio transmitter is used in situations in which Persons are exposed as a consequence of their employment, provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. VOICE CODING TECHNOLOGY The AMBE+2 voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within his Communications Equipment. The user of this Technology is explicitly prohibited from attempting to extract, remove, decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. USS. Patent Nos.

+#8,595,002, #8,359,197, #8,315,860, #8,200,497,

#7,970,606, and #6,912,495 B2. Battery caution Misuse of Li-ion batteries may result in the following hazards: smoke, fire, or the battery may rupture. Misuse can also cause damage to the battery or degradation of battery performance.

\ DANGER! NEVER piace battery packs near a fire. Fire or heat may cause them to rupture or explode. Dispose of used battery packs in accordance with local regulations.

\ DANGER! NEVER let fluid from inside the battery get in your eyes. This can cause blindness. Rinse your eyes with clean water, without rubbing them, and immediately get medical treatment from an eye doctor. A\WARNING! NEVER solder the battery terminals, or NEVER modify the battery pack. This may cause heat generation, and the battery may burst, emit smoke or catch fire. A\WARNING! NEVER piace or leave battery packs in areas with temperatures above 60C (140F). High temperature buildup in the battery cells, such as could occur near fires or stoves, inside a sun-heated vehicle, or in direct sunlight for long periods of time may cause the battery cells to rupture or catch fire. Excessive temperatures may also degrade the battery packs, performance or shorten the battery cell's life. A\WARNING! NEVER strike or otherwise impact the battery pack. Do not use the battery pack if it has been severely impacted or dropped, or if the pack has been subjected to heavy pressure. Battery pack damage may not be visible on the outside of the case. Even if the. surface of the battery does not show cracks or any other damage, the cells inside he battery may rupture or catch fire. A\WARNING! NEVER use deteriorated battery packs. They could cause a fire. A\WARNING! NEVER put the battery pack in a microwave oven, high-pressure container, or in an induction heating cooker. This could cause a fire, overheating, or cause the battery cells to rupture. A\WARNING! NEVER let fluid from inside the battery cells come in contact with your body. If it does, immediately wash with clean water. CAUTION: DO NOT continue to use the battery pack if it emits an abnormal odor, heats up, or is discolored or deformed. If any of these conditions occur, contact your Icom dealer or distributor. CAUTION: DO NOT expose the battery pack to rain, snow, saltwater, or any other liquids. Do not charge or use a wet pack. If the pack gets wel, be sure to wipe it with a clean dry cloth before using CAUTION: DO NOT use the battery pack out of the specified temperature range for the transceiver ~30'

~ 460C (-22F ~ +140F), and the battery itself -20C

~ 460C (_4F ~ +140F). Using the battery out of its specified temperature range will reduce its performance and battery cell's life. Please note that the specified temperature range of the battery may exceed that of the transceiver. In such cases, the transceiver may not work properly because it is out of its operating temperature Tange. ABOUT CE AND DOC Hereby, Icom Inc. deciares that the versions, of IP730D and IP740D which have the CE symbol on the product, comply with the essential requirements of the Radio Equipment Direc ive, 2014/53/EU, and the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive, 2011/65/EU. The full text of the EU declaration of conformity is available at the following Intemet address:

https:/www.icomjapan.com/support DISPOSAL The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection loca ions at WM the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area RECOMMENDATION CLEAN THE TRANSCEIVER THOROUGHLY IN A BOWL OF FRESH WATER after exposure to saltwater, and dry it before operating. Otherwise, the transceivers keys and switches may become unusable, due to salt crystallization, and/or the charging terminals of the battery pack may corrode. NOTE: If the transceivers waterproof protection appears defective, carefully clean the transceiver with a soft, damp (fresh water) cloth, then dry it before operating, The transceiver may lose its waterproof protection if the case, jack cap, or connector cover is cracked or broken, or the transceiver has been dropped. Contact your Icom distributor or your dealer for advice. Bluetooth INTERFERENCE Bluetooth uses he 2.4 GHz band. When using the transceiver in the 2.4 GHz band near a Bluetooth device, interference may occur. This may cause a decrease in communication speed, and an unstable connection. In such case, use the transceiver away from the Bluetooth device communication area, or stop using the Bluetooth device. SUPPLIED ACCESSORIES Bett clip Connector cover and screw v NOTE: Some accessories are not supplied, or the shape is different, depending on the transceiver version. CAUTION: DO NOT leave the pack fully charged, completely discharged, or in an excessive temperature environment (above 60C, 140F) for an extended Period of time. If the battery pack must be left unused tor a long time, it must be detached from the transceiver after discharging. You may use the battery pack until the remaining capacity is about haif, then keep it safely ina cool and dry place at the following temperature range:

=20C ~ +50C (4F ~ +122F) (wi hin a month)

-20C ~ +40C (4F ~ +104F) (wi hin three months) 20C ~ +20C (-4F ~ +68F) (within a year) BE SURE to replace the battery pack with a new one approximately five years after manufacturing, even if it stil holds a charge. The material inside the battery cells will become weak afer a period of time, even with little use. The estimated number of times you can charge the pack is between 300 and 500. Even when the pack appears to be fully charged, the operating time of the transceiver may become short when:

+ Approximately 5 years have passed since the pack was manufactured.

+ The pack has been repeatedly charged. Charging caution A\WARNING! NEVER charge the transceiver during a lightning storm. It may result in an electric shock, cause a fire or damage the transceiver. Always disconnect he Power adapter before a storm A\WARNING! NEVER charge or leave the battery in the battery charger beyond the specified time for charging. If the battery is not completely charged by the specified time, stop charging and remove the battery from the battery charger. Continuing to charge the battery beyond the specified time limit may cause a fire, overheating, or the battery may rupture. A\WARNING! Occasionally observe the battery pack condition while charging. If any abnormal condition occurs, discontinue using the battery pack. CAUTION: DO NOT charge the battery pack in areas with extremely high temperatures, such as near fires or stoves, inside a sun-heated vehicle, or in direct sunlight. In such environments, the safety/protection circuit in the battery will activate, causing the battery to stop charging, CAUTION: DO NOT insert the transceiver (battery attached to the transceiver) into the charger if it is wet or soiled. This could corrode the battery charger terminals or damage the charger. The charger is not waterproof. CAUTION: DO NOT charge the battery pack outside of the specified temperature range: 0C to 60C (32F to 140F) Icom recommends charging the pack at 25C (77F). The Pack may heat up or rupture if charged out of the specified temperature range. Additionally, packs performance or battery cell life may be reduced CAUTION: DO NOT use the power adapter unless the power ou let is easily accessible and near the unit. Remove it from the AC power outlet when not in use. BATTERY CHARGING Using the BC-227 DESKTOP CHARGER:

Charging time: approximately 4.4 hours for the BP-303. Turn OFF Power adapter*

/ Status indicator The CP-23L (for a 12 V cigarette lighter socket) can be used instead of he power adapter.

* The shape may be different, depending on the charger version. OStatus indicator Light color Status Orange _ [Charging Green _|Charging is completed inks orange |Charging failed. It may have some and green _|problems. NOTE:

= The transceiver MUST be tuned OFF while charging. Otherwise:

~The battery will not be charged property.

~The battery life may be shortened.

= Do not transmit while charging. When you need to transmit, remove the transceiver from the charger, and. then tum ON the power.

- Ifthe battery pack does not property charge when itis attached to the transceiver, remove it from the transceiver and insert only the battery pack into the charger. PANEL DESCRIPTION Rotary Antenna somegeor Wol]

Status tem) SE = indicator IN

(P Mutti-

Speaker i connector

[sub PTT] s jf ||

Function

[Side 1] #" display

[side 2] *

angi [FUNC]

[Address| Hs" saa) i

[can Tato ll Tle Te Nes) ICLR/Lock]

et many) Status Lights red: Transmitting Lights green Receiving or squelch is open Lights yellow: Receiving and transmitting in the Full-Duplex mode. Multi-connector Connects to an optional speaker microphone or headset. CAUTION: DO NOT use the transceiver without the connector cover or optional equipment attached. The transceiver meets IP67 requirements for dusttight and waterproof protection only when the connector cover or the optional speaker microphone is attached. See

"OPTIONS" for the usable speaker microphones. USING THE CELLULAR MODE You can make a call with other IP transceivers using the cellular network Selecting a call-to party 1. Push [Address] to display the Address book. The Address book is displayed. 2. Push [Address] several times to toggle the call type. The selectable call type may differ, depending on the presetting. 3. Rotate Rotary Selector or push [A] or [] to select a call-to party. Receiving and transmitting Receiving:

When a Call is received, the Status indicator lights green. Transmitting:

While holding down [PTT], speak at your normal voice level The Status indicator lights red while [PTT] is pushed, Talk while receiving a cal While receiving a call, push [PTT] to talk in the Full-

Duplex mode" like a telephone call

@ In the Full-Duplex mode, the Status indicator lights yellow.

* Usability depends on a presetting. Ask your dealer for details, About the call type:

+ All call Transmit to all of the transceivers hat belong to the network.

+ Group call: Transmit to the transceivers that belong to the same group.

+ Talkgroup call: Transmit to the transceivers hat belong to the same Talkgroup.

+ Individual call: Transmit to an individual transceiver.

+ Telephone call: Transmit to an IP phone.*

Transmittable, depending on the presetting, FUNCTION DISPLAY as 10:0040) THs IP730D-107 001 CH-35. IP730D_TG1 Cellular mode IDAS mode Cellular mode Displays the signal strength level by 3 bars.

@ Aconnected network type (4G or 3G) is displayed on the left top.

~ Blinks when the transceiver location is out of qq | _ the service area, or cannot receive a control Mal | signal

+ Displayed if transceiver has not been authenticated Acconnected network type (4G or 3G) is displayed on the left top. at All/Group Call PR Talkgroup Call Individual Call

| Phone cai May be usable, depending on a presetting IDAS mode Displays the relative receive signal strength level Displayed when the signal level is low. AlvGroup Call Displayed when the Encryption function is ON. Displayed" when high output power is selected. T a

& | individuai ca 3}

H Displayed" when low output power is selected L1 | 2%is displayed for 2 W, *L1" is displayed for 1W, Displayed" when a receive-only channel is selected. 4 | Displayed when the channel is in the audible

(unmuted) mode. Blinks when the transceiver temperature becomes hot. USING THE IDAS MODE You can make a call with other transceivers registered to the IDAS system. Receiving and transmitting Receiving:

1. Rotate Rotary Selector or push [4] or [] to select a channel 2. When a Call is received, the Status indicator lights green Trans1 ing:

CAUTION: DO NOT transmit without an antenna. 1. Wait until the channel is clear to avoid interference. 2. While holding down [PTT], speak at your normal voice level. 3. Release [PTT] to receive. IMPORTANT:

To maximize the readability of your signat 1 After pushing [PTT], pause briefly before you start speaking. 2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, then speak at your normal voice level. USING THE DUAL MODE You can use the Cellular mode and IDAS mode at the Same ime Main mode and Sub mode When the Dual mode is selected, the Main mode and Sub mode are displayed as shown below. H 10:

WIP730D_TG2 28 T_IP730D_TGi 28 Main mode Sub mode. Switching the operating mode:

Hold down [FUNC] for 1 second to toggle he Main mode and Sub mode. Transmitting Hold down [PTT] to transmit in the Main mode.

@ Hold down [Sub PTT] to transmit in the Sub mode.

@ You can also simultaneously transmit" in bo h modes by holding down both [PTT] and [Sub PTT], The Status indicator lights yellow.

@ Achannel, call to - party, or call type are not selectable in the Sub mode. To select those, switch to the Main mode. Cellular/IDAS mode Big | - Displayed when ne Record function is ON.

+= Blinks while recording audio. x | Displayed when Bluetooth is activated. B_| Displayed wnen a Bluetooth device is connected.

+ Displayed when he Pocket Beep function is ON.

&P | - Blinks when a call is received. It blinks until the transceiver returns to the standby mode after a received signal disappears.

=a Displayed when he P-Bell function is ON. a Displayed when he Key Lock function is ON. OX | Disptayed when he VOX function is ON. Displayed when he Emergency Call function is ON. i Displays the remaining battery charge.

@: Full a Mid Gi: Charging required Gl Battery exhausted cE Blinks when the transceiver downloading a new firmware.

$% | Displayed when he Surveillance func ion is ON. OPTIONS Battery pack/Battery case

+ BP-302/BP-303 BATTERY PACK Battery] Voltage Capacity Approximate pack battery life BP-302| 7.2V [1950 mAh (Minimum)| 15 hours 2010 mAh (Typical) BP-303| 7.2V [3200 mAh (Minimum)| 25 hours 3350 mAh (Typical) In the Cellular mode, he power save function is turned ON, and the operating periods are calculated under the following conditions. TX: RX: standby = 5:5: 90

+ BP-305 BATTERY CASE Battery case with 5 AA battery cells. Chargers

+ BC-227 DESKTOP CHARGER + BC-242 AC ADAPTER, BC-123S AC ADAPTER, OPC-515L DC POWER CABLE To rapidly charge he battery pack. Charging time: Approximately 4.4 hours for the BP-303. OPC-515L must be purchased separately.

+ BC-226 DESKTOP CHARGER + BG-228 AC ADAPTER You can connect up to 6 BC-226 together. Charging time: Approximately 4.2 hours for the BP-303.

@A power adapter may be supplied, depending on the charger's version. Antennas

+ FA-SC25V/FA-SC28V/FA-SC29V/FA-SC55V VHF ANTENNAS FA-SC25V 136-150 MHz FA-SC28V 148-162 MHz FA-SC29V 160-174 MHz FA-SC5SV 150-174 MHz

+ FA-SC26VS/FA-SC27VS/FA-SC56VS/FA-SC57VS VHF STUBBY ANTENNAS FA-SC26VS 136-144 MHz FA-SC27VS 142-150 MHz FA-SC56VS 150-162 MHz FA-SC57VS 160-174 MHz

+ FA-SC61VC VHF CUT ANTENNAS. FA-SC61VC 136-174 MHz

+ FA-SCO1U/FA-SCO2U/FA-SCO3U/FA-SC25U/

FA-SC57U/FA-SC72U UHF ANTENNAS FA-SCO1U 350-400 MHz FA-SCO2U 330-380 MHz FA-SCO3U 380-430 MHz FA-SC25U 400-430 MHz FA-SC57U 430-470 MHz FA-SC72U 470-520 MHz FA-SC26US/FA-SC73US UHF STUBBY ANTENNAS FA-SC26US 400-450 MHz FA-SC73US 450-490 MHz

+ FA-SC61UC UHF CUT ANTENNAS FA-SC61UC 380-520 MHz

+ FA-SC62V/FA-SC63V HIGH GAIN ANTENNAS FA-SC62V 155 MHZ FA-SC63V 160 MHZ BASIC OPERATION Turning ON the transceiver NOTE: Before using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. See the BATTERY CHARGING section. Rotate [VOL] clockwise to the 12 o'clock position to turn ON the transceiver. The dial is made ight for dust and water resistance. Totum OFF. he transceiver, rotate [VOL] counter-

clockwise until it makes a click sound. Adjusting the volume level Rotate [VOL] to adjust the volume level The Adjustment screen is displayed while adjusting. ial 10:00) Volume: 5

<o Using the Key Lock function You can use the Key Lock function to prevent accidental channel changes and unnecessary function access, depending on the presetting Hold down [CLR/Lock] for 1 second to turn the Key Lock func ion ON or OFF. nO is displayed while the function is ON.

[PTT], [Sub PTT], and [VOL] are usable even while the function is ON. Selecting the operation mode You can select the operating mode, as shown below. 1. Push [FUNC] to display the function.

+ The Function is displayed. 2. Push [FUNC] to display Mode Select, if other functions are displayed.

@ Itmay be required to push [FUNC] several imes, depending on the presetting, 3. Rotate Rotary Selector or push [4] or [] to select the operating mode, and then push [Call History],

+ The operating mode is selected and returns to the Standby screen. Others

+ MB-136, MB-133 BELT CLIP

+ MB-96F, MB-96FL, MB-96N BELT HANGERS

+ LC-195 CARRYING CASE + MB-57L SHOULDER STRAP

+ VS-3 Bluetooth HEADSET The Bluetoo h headset with a [PTT] switch

+ HM-184, HM-222, HM-236 SPEAKER MICROPHONE HM-184: Meets IP67 waterproof protection. HM-222: Meets IP68 waterproof protection.

+ HM-163MC TIEPIN TYPE MICROPHONE.

+ HM-238MC TIEPIN TYPE MICROPHONE, With a [Sub PTT] switch,

+ EH-15B EARPHONE, SP-26 TUBE EARPHONE, SP-28 EAR HOOK TYPE EARPHONE For use with the HM-163MC or HM-238MC

+ SP-27 TUBE EARPHONE, SP-29 EAR HOOK TYPE EARPHONE, SP-40 EARPHONE + AD-135 EARPHONE ADAPTER AD-135: Used to connect an earphone to the transceiver's multi-connector.

+ CP-23L CIGARETTE LIGHTER CABLE Used when charging a battery pack through a cigarette lighter socket. TECHNICAL INFORMATION Frequency Output Model | Version a Poe 1P730D 136-174 MHz 5W 400-520 MHz 1P740D 5W EXP-02 EuRO1 | 390-470 MHz

+ Channel spacing: 6.25 kHz/12.5 kHz

[e) ICOM precautions SYSTEME RADIO AVANCE IP IP730D IP740D Merci d'avoir choisi un produit Icom. LIRE TOUTES LES PRECAUTIONS soigneusement et intgralement avant d'utiliser la radio. Icom nvest pas responsable de la destruction ou des dommages sur l'metteur-rcepteur Icom, si le

\dysfonctionnement est caus par:

+ Force majeure, sans toutefois s'y limiter, les incendies, tremblements de terre, temptes, inondations, fa foudre, ou autres catastrophes naturelles, perturbations, meutes, guerre, ou contamination radioactive.

+ Utilisation de rmetteur-rcepteur Icom avec tout quipement non fabriqu ou approuv par Icom. Icom, Icom Inc. et le logo Icom sont des marques dposes de Icom Incorporated (Japon) au Japon, aux Etats-Unis, au Royaume-Uni, en Allemagne, en France, en Espagne, en Russie, en Australie, en Nouvelle-Ztand et/ou dans d'autres pays. AquaQuake est une marque dpose de Icom Incorporated. AMBE + 2 est une marque dpose et proprit de Digital Voice Systems Inc. Le nom et les logos Bluetooth sont des marques dposes appartenant a Bluetooth SIG, Inc. Toute utilisation de ces marques par Icom Inc. fait Fobjet d'une licence. Tous les autres produits et toutes les autres marques sont des marques dposes ou non appartenant a leur titulaire respectit Icom Inc. Count on us!

1-1-32 Kamiminami, Hirano-ku, A7605D-2US Osaka 547-0003, Japan Printed in Japan Aug. 2020 2020 Icom Inc. DEFINITIONS EXPLICITES TERME [DEFINITION __ Risque @accident mortel, de blessures corporelles graves ou dexplosion. A\DANGER !

Risque de blessures corporelies, A AVERTISSEMENT ' qincendie ou de choc lectrique La non prise en compte peut lentrainer des dsagrments. MISE EN GARDE |Absence de risque de blessures

[corporelles, d'incendie ou de

[choc lectrique. PRECAUTIONS

\ DANGER! NE JAMAIS utiliser le radio proximit de dtonateurs lectriques non blinds ou dans une atmosphre explosive. A\AVERTISSEMENT ! Nutilisez JAMAIS et ne rechargez JAMAIS des blocsbatteries Icom avec des metteurs-

rcepteurs non-Icom ou des chargeurs non-Icom. Seuls les blocsbatteries Icom sont tests et homologus pour tre utiliss avec des metteurs-rcepteurs Icom ou pour tre rechargs avec des chargeurs Icom. L'utilisation de blocsbatteries ou de chargeurs tiers ou de contrefacon peut tre a lorigine de fumes, d'incendie ou peut faire clater la batterie A\AVERTISSEMENT ! NE JAMAIS 'metteur-rcepteur de sorte que I'antenne soit trs proche des parties exposes du corps, en particulier du visage ou des yeux, et ne les touche pas pendant la transmission A. AVERTISSEMENT ! Nutilisez JAMAIS 'metteur-

rcepteur avec un casque ou d'autres accessoires audio a des niveaux de volume levs. Le fonctionnement continu volume lev peut provoquer une sonnerie dans vos oreilles. Si vous ressentez la sonnerie, rduisez le volume ou cessez d'utiliser. A. AVERTISSEMENT! NE JAMAIS utiliser la radio en conduisant un vhicule. La scurit de la conduite requiert toute attention du conducteur toute dfaillance peut tre a rorigine d'un accident. MISE EN GARDE : NE PAS court-circuiter les bores de la batterie. Un court-circuit peut se produire si les bores touchent des objets metalliques tels qu'une cl. Soyez donc prudent lorsque vous placez les batteries (ou rmetteur-rcepteur) dans des sacs, etc. Transportezles de manire a ce qu'll n'y ait pas de court-circuit avec des objets mtalliques. Un court-circuit peut endommager non seulement la batterie, mais galement 'metteur-

rcepteur. MISE EN GARDE : NE PAS utiliser de dissolvants agressifs tels que du Benzne ou de alcool lors du nettoyage, car ils endommageraient les surfaces de rmetteur-rcepteur. Si fmetteur-rcepteur est poussireux ou sale, nettoyezte avec un tissu doux et sec. MISE EN GARDE : NE PAS placer 'metteur-rcepteur dans des environnements excessivement poussireux. Cela pourrait endommager 'metteur-rcepteur. ISE EN GARDE : NE PAS placer ou laisser 'metteur-

rcepteur dans des zones oli la temprature est infrieure 4-30 C ( 22 F) ou suprieure a + 60 C (+ 140 F), ou dans les zones exposes a la lumire directe du soleil, telles que le tableau de bord. MISE EN GARDE : Lmetteur-rcepteur rpond aux exigences IP67* pour une protection tanche la poussire et 4 l'eau. Cependant, une fois rmetteurrcepteur tomb, tanche a la poussire et a la protection impermable a eau ne peuvent tre garanties du fait que metteur-rcepteur peut tre fissur ou que le joint tanche a eau est endommag, etc.

*Uniquement lorsque le couvercle du connecteur ou le micro haut-parleur optionnel est attach. Mise en garde concernant la batterie Une mauvaise utilisation des batteries au Li-ion prsente les risques suivants : dgagement de fume, incendie ou clatement de la batterie. Une mauvaise utilisation peut galement endommager la batterie ou en dgrader ses Performances. 4 DANGER ! NE JAMAIS placer ou laisser des blocs-batteries prs du feu. La chaleur ou des flammes peuvent provoquer ln clatement ou une explosion. Mettez au rebut les blocs-

batteries usags conformment a la rglementation locale. A\DANGER ! NE JAMAIS laisser du liquide provenant de l'intrieur de la batterie entrer en contact avec les yeux. Cela peut causer une ccit. Rincez abondamment ies yeux a 'eau courante, sans les frotter et consultez immdiatement un mdecin. A\AVERTISSEMENT ! NE JAMAIS souder les bornes de la batterie ou bien NE JAMAIS modifier le bloc-batterie Ceci peut provoquer une surchauffe de la batterie, qui risque alors d'clater, de fumer ou de prendre feu. A\AVERTISSEMENT ! NE JAMAIS poser ou laisser les blocs-batteries dans des endroits soumis 4 des tempratures suprieures a 60 C (140 F). Laccumulation de haute temprature dans les cellules de la batterie survenant, par exemple, a proximit d'un feu ou de cuisinires, a Fintrieur d'un vhicule au soleil ou a la lumire directe du soleil pendant de iongues priodes de temps, risque de faire clater les cellules de la batterie ou enflammer. Les tempratures excessives peuvent galement dgrader les performances du bloc-batterie ou rduire la dure de vie de Ia batterie. A\AVERTISSEMENT ! NE JAMAIS cogner ou provoquer d'autres chocs sur le bloc-batterie. Ne pas utiliser un bloc-

batterie qui a recu un choc important, qui est tomb au sol ou qui a t soumis a de fortes pressions. Les dommages subis par un bloc-batterie peuvent ne pas tre visibles de extrieur. Mme si la surface de la batterie ne semble as fissure ou endommage, les cellules a lintrieur de la batterie peuvent se rompre ou prendre feu A\AVERTISSEMENT ! NE JAMAIS des blocs-batteries dtriors. lls pourraient provoquer un incendie A\AVERTISSEMENT ! NE JAMAIS mettre le bloc-batterie dans un four a micro-ondes, un rcipient haute-pression ou dans un appareil de cuisson a induction. Ceci peut provoquer un incendie, une surchauffe ou conduire a la Tupture des cellules de la batterie. A\AVERTISSEMENT ! NE JAMAIS laisser du liquide provenant de 'intrieur des cellules de la batterie entrer en contact avec votre corps. Si cela se produit, rincez abondamment avec de l'eau propre. A\AVERTISSEMENT ! NE JAMAIS utiliser de batteries endommages. Elles pourraient provoquer un incendie. MISE EN GARDE : ! NE JAMAIS utiliser le bloc-batterie sil dgage une odeur anormale, s'il surchauffe, est dcolor ou dform. Si une d ces situa ions se produit, contactez votre revendeur ou distributeur Icom. MISE EN GARDE : NE PAS utiliser le bloc-batterie hors de la plage de temprature spcifie pour 'metteur-

rcepteur ~ 30 C ~ + 60C, (22 F ~ + 140 F) et la batterie elle-mme 20 C ~ +60 C (_4 F ~ + 140 F). Llutilisation de la batterie hors de la plage de temprature spcifie rduit les performances et la longvit des cellules de la batterie. Notez que la plage de temprature indique pour la batterie peut tre plus large que celle qui s'applique a r'metteur-rcepteur. En pareil cas, le fonctionnement de 'metteur-rcepteur peut tre aitr Par une utilisation en dehors de la plage de temprature de fonctionnement. MISE EN GARDE : NE PAS laisser le bloc a pleine charge, entirement dcharg, ou dans un environnement a temprature excessive (suprieure a 60 C, 140 F) Pendant une priode prolonge. Si vous prvoyez de e pas utiliser le bloc-batterie pendant une priode prolonge, retirez-le de 'metteur-rcepteur aprs l'avoir dcharg. Vous pouvez utiliser le bloc-batterie jusqua ce que la Capacit se soit rduite de moiti, puis gardez-te en scurit dans un endroit frais et sec dans la plage de tempratures suivante

= 20C ~ + 50C (-4 F ~ + 122 F) (un mois maximum)

= 20C ~ +40 C (4 F ~ + 104 F) (trois mois maximum)

= 20C ~+20C (-4 F ~ +68 F) (un an maximum) VEILLEZ a remplacer le bloc-batterie par un neuf environ cing ans aprs sa fabrication, mme sil tient la charge. Les matriaux prsents a r'intrieur des cellules de la batterie se dtriorent aprs un certain temps, mme en cas d'utilisation rduite. Lestimation du nombre de fois que vous pouvez recharger le bloc est comprise entre 300 et 500. Mme lorsque le bloc semble compltement charg, le temps de fonctionnement de 'metteur-

rcepteur peut tre rduit si

+ Le bloc a t fabrique il y a environ 5 ans.

+ Le bloc a t charg de nombreuses fois. Mise en garde concernant la recharge A\AVERTISSEMENT ! NE JAMAIS charger metteur-

rcepteur durant un orage. Cela risquerait de provoquer un choc lectrique, un incendie ou dendommager rmetteur-rcepteur. Toujours dbrancher I'adaptateur falimentation avant une tempte. A\AVERTISSEMENT ! NE JAMAIS charger le bloc-

batterie des endroits exposs a des tempratures extrmement leves, comme a proximit de flammes ou de poles, a I'ntrieur d'un vhicule expos au soleil, ou en plein soleil. Dans ces environnements, le circuit de scurit/protection a r'intrieur de la batterie peut sactiver et interrompre la recharge de la batterie. A\AVERTISSEMENT ! NE PAS recharger ou laisser la batterie dans le chargeur de batterie au-dela du temps spcifi pour la charge. Sia batterie nest pas. compltement charge pendant le temps spcifi, interrompez la recharge et retirez la batterie du chargeur de batterie. En continuant a charger Ia batterie au-dela du temps spcifi, vous pouvez provoquer un incendie, une surchauffe ou dtriorer la batterie. A\AVERTISSEMENT ! Vrifiez rgulirement tat de la batterie pendant le chargement. Si vous constatez une anomalie, nutilisez plus fa batterie. MISE EN GARDE : NE JAMAIS insrer 'metteur-

rcepteur (batterie fixe sur 'metteur-rcepteur) dans le chargeur s'il est mouill ou sale. Ceci peut corroder les bornes du chargeur de Ia batterie ou endommager le chargeur. Le chargeur n'est pas tanche. MISE EN GARDE : NE PAS charger le bloc-batterie en dehors de la plage de temprature spcifie 0C ~ 60 C (32 F ~ 140 F). Icom recommande de charger le bloc a 25C (77F). Le bloc peut chauffer ou se fissurer s'il est charg en dehors de la plage de temprature spcifie. Par ailleurs, ceci peut rduire les performances ou la longvit de la batterie. La charge sarrte automatiquement lorsque la temprature est hors de la plage spcifie. MISE EN GARDE : NE PAS utiliser 'adaptateur lectrique moins que la prise d'alimentation ne soit facilement accessible et prs de l'appareil. Le retirer de la prise alimentation en courant alternatit lorsquil n'est pas utilis. INFORMATION FCC Cet quipement a t test et reconnu conforme aux limites fixes pour un appareil numrique de classe A, conformment au point 15 de a rglementation FCC. Ces limites assurent une protection raisonnable contre les interfrences nuisibles lorsque quipement est utilis dans un environnement commercial. Cet quipement gnre une nergie de radio frquence, utilise et rayonner et sil rest pas install et utilis conformment au manuel instruction, peut causer des interfrences nuisibles aux communications radio. Le fonctionnement de cet quipement dans une zone rsidentielle est susceptible de causer des interfrences nuisibles lorsque l'utilisateur doit corriger les interfrences a ses propres frais. MISE EN GARDE: Tout changement ou modification, non expressment approuv par Icom Inc., peut annuler autorisation de rutilisateur a utiliser cet appareil conformment a la rglementation FCC. Cet appareil respecte les conditions tablies au Paragraphe 15 des rgies de la FCC. Son utilisation est assujettie a la condition de ne pas provoquer des interfrences nuisibles. INFORMATION SUR LA FORMATION A LA SECURITE Votre radio Icom produit une nergie lectromagntique de radiofrquences

(RF), en mode de transmission. Cette radio est concue pour un usage professionnel seulement et classe AVERTISSEMENT comme tel, ce qui signifie qu'elle doit tre ultilise uniquement dans le cadre d'un travail par des personnes conscientes des dangers et des mesures visant a minimiser ces dangers. Elle NEST PAS concue pour une utilisation grand public, dans un environnement non contrl. Cet appareil a t valu et jug conforme, aux limites exposition aux RF de la FCC et dIC, pour une utilisation grand public. En outre, votre radio Icom satisfait les normes et directives qui suivent en matire de niveaux d'nergie et d'nergie lectromagntique de RF et d'valuation de tels niveaux en ce qui conceme exposition humaine:

+ Publication 447498 D03 de la FCC KDB, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.

+ Norme de American National Standards Institute

(ANSI): IEEE C95.1-2010 sur les niveaux de scurit compatibles avec lexposi ion humaine aux champs lectromagntiques de radiofrequences (3 KHz a 300 GHz).

+ Norme de ANSI: IEEE C95.3-2002 sur la mthode

'valuation recommande du champ magntique Potentiellement dangereux des radiofrquences et des micro-ondes.

+ Les accessoires illustrs dans Options de la feuille instructions sont approuvs pour une utilisation avec ce produit. L'utilisation d'accessoires autres que ceux prciss peut entrainer des niveaux dexposition aux RF suprieures aux limites tablies par la FCC et d'IC en matire dexposition aux RF sans fl

+ Le Code de scurit 6 de Sant Canada - Les limites exposition humaine a nergie lectromagntique dans la gamme de frquences de 3 kHz a 300 GHz. Afin de vous assurer que votre exposition

@ une nergie lectromagntique de RF se situe dans les limites permises par la FCC et dIC pour une utilisation grand public, veuillez en tout temps respecter MISEEN GARDE [S directives suivantes:

+ NE PAS faire fonctionner la radio sans qu'une antenne approprie y soit fixe, car ceci risque dendommager la radio et causer une exposition suprieure aux limites tablies par la FCC et d'IC. Lantenne approprie est celle qui est fourie avec cette radio par le fabricant ou une antenne spcialement autorise par le fabricant pour tre utiise avec cette radio,

+ NE PAS mettre pendant plus de 50% du temps total utilisation de rappareil (50% du facteur d'utilisation), Emettre pendant plus de 50% du temps total d'utilisation peut causer une exposition aux RF suprieure aux limites tablies par la FCC et IC. Lorsque le voyant DEL rouge sallume, cette radio est en train dmettre. La radio mettra si vous appuyez sur le bouton du microphone.

+ TOUJOURS tenir 'antenne loigne dau moins 2.5 cm de votre corps au moment dmettre et utiliser uniquement attache pour ceinture Icom illustre dans Options de la feuille d'instructions, lorsque vous attachez la radio a votre ceinture, ou a autre chose, de facon a vous assurer de ne pas provoquer une exposition aux RF suprieure aux limites fixes par la FCC et d'IC. Pour offfir a vos interiocuteurs fa meilleure qualit de transmission possible, tenez 'antenne a au moins 5 cm de votre bouche et grement de ct. Les renseignements ci-dessus foumnissent a Tutilisateur toute I'information ncessaire sur exposition aux RF et sur ce qu'il faut faire pour assurer que cette radio fonc ionne en respectant les limites d'exposition aux RF tablies par la FCC et d'IC. Interfrence lectromagntique et compatibilit En mode de transmission, votre radio Icom produit de nergie de RF qui peut provoquer des interfrences avec d'autres appareils ou systemes. Pour viter de telles interfrences, mettez la radio hors tension dans les secteurs oli une signalisation exige. NE PAS faire fonc ionner 'metteur dans des secteurs sensibles au rayonnement lectromagntique tels que les hpitaux, les aronefs et les sites de dynamitage Usage professionnel/contr Ce radio metteur est utilis dans des cas oli des Personnes sont exposes en raison de leur travail, pourvu qu'elles soient conscientes du risque d'exposition et quelles puissent exercer un controle sur cette exposition. their exposure. TECHNOLOGIE DE CODAGE DE LA VOIX Le systme de codage AMBE+2 utilis dans ce produit est protg par les reglements de proprit intellectuelle, incluant des droits de proprit, des copyrights et des accords de confi dentialit sur les systemes de numrisation de la voix. La licence concemant la technologie de codage de la voix est concde seulement pour tre utilise avec cet quipement de communication. lest formellement interdit a utiisateur d'essayer extraire, de dcompiler ou de raliser du reverse engineering ou tout autre opration ayant pour but de convertir le code objet sous une forme lisible.

+#8,595,002, #8,359, 197, #8,315,860, #8,200,497,

+#7,970,606, #6,912,495 B2. RECOMENDACION NETTOYER SOIGNEUSEMENT L'EMETTEUR-

RECEPTEUR DANS UN RECIPIENT AVEC DE L'EAU DOUGE aprs toute exposi ion a eau de mer et scher Yappareil avant de utiliser de nouveau. Autrement, les touches de r'metteur-rcepteur, les commutateurs et les contrleurs risquent de devenitr inutilisables du fait de la cristallisation du sel, et/ou de la corrosion des bornes de recharge du bloc batterie. MISE EN GARDE: sila protection tanche de Ymetteur-rcepteur semble dfectueuse, la nettoyer soigneusement avec un tissu doux et humide (d'eau douce), puis la scher avant de utiliser. L'metteur-

rcepteur risque de perdre sa protection tanche si le boitier, le capuchon de la prise jack, ou le couvercle du connecteur est fl ou cass, ou en cas de chute de metteur-rcepteur. Contactez votre distributeur ou. votre concessionnaire Icom pour obtenir des conseils. INTERFERENCES Bluetooth Bluetooth? utilise la bande de 2,4 GHz. Si vous utilisez rmetteurs-rcepteurs dans la bande de 2,4 GHz a proximit d'un appareil Bluetooth, ceci peut provoquer des interfrences. Ceci peut rduire le dbit de communication et rendre la connexion instable. Dans ce cas, u ilisez metteurs-rcepteurs a distance suffisante de la zone de communication de 'appareil Bluetooth ou cessez dutiiser l'appareil Bluetoo h.

Model:IP740D FCC ID: AFJ418001 IC: 202D-418001 HVIN:418001-01 Restricted to occupational use to satisfy FCC RF A\ exposure limits. See user manual for operating requirements. This device complies with part 15 of the Attention! FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Icom Inc. MADE IN JAPAN SERIAL NO. 000000000000 QO A A A C-21650 Use t0 satisfy FCC AF tgs spt seh fequirements. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that NTEATON this device les el cos tariad acters

Icom Inc. 4-6-19,Kamikuratsukuri,Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax : +81 66793 3336 e-mail: world_support@icom.co.jp . URL : http:/Awww.icom.co.jp/world Date: Dec 26, 2022 To Whom It May Concern Subject: Confidentiality and Short-Term Confidentiality Letter Applicant: Icom Incorporated FCC ID: AFJ418001

- Dear Sir/Madam:

. The applicant would like to request the following documents submitted with this application for certification be withheld from public disclosure as per Section 0.457 & 0.459 of FCC Rules. Confidential 1. Operational Description 2. Block Diagram ~

3. Schematics 4. Parts List 5. Tuning Info Short-Term Confidential for 120 days from grant date 6. External Photos , -

7. Internal Photos. 8. Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation shall not be made. Regards Icom Incorporated Atsushi Tomiyama General Manager of Quality Assurance Department

Icom Inc. 1-6-19, Kamikuratsukuri, Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax : +81 6 6793 3336 e-mail: world_support@icom.co.jp :

URL : http:/Avww.icom.co.jp/world Date: Jan 13, 2023 To Whom It May Concern Subject: FCC Part 90 Letter Applicant: Icom Incorporated Product: UHF transceiver with LTE Model: IP740D FCC ID: AFJ418001 Dear Sir/Madam, This equipment meets the requirements of the FCC Rules, Parts 90.203(e) and (g), as applicable. Since end user does not permit operating outside of part 90 bands for non-federal use, programming part 90 frequencies can be performed ONLY by the manufacturer or by maintenance personal. Icom ensure that non-federal operator cannot access radio programming tools so that they cannot program transmit frequencies using the equipments external operation controls. Best regards Icom Incorporated Atsushi Tomiyama lems General Manager of Quality Assurance Department .

Icom Inc. 1-6-19,Kamikuratsukuri,Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax : +81 6 6793 3336 e-mail: world_support@icom.co.jp . URL : http:/Awww.icom.co.jpworld Cd Date: Dec 26, 2022 Declaration letter - KDB 996369 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road . Columbia, MD Product: IP740D FCC ID: - AFJ418001 We, ICOM Incorporated, declare that the original test reports of the LTE/WCDMA Module (FCC iD: UDV-201606) is accurately represents test results under the new application IP740D FCC ID:

AFJ418001. The modules LTE/WCDMA Module (FCC ID: UDV-201606) is used and integrated according module supplier application notes and represents the new device, IP740D FCC ID: AFJ418001. The following list shows the modules with the referring FCC ID and the associated FCC Test reports:

Module. >

LTE/WCDMA Module (FCC ID: UDV-201606) Name of Grantee: Shanghai Simcom Ltd. FCC Test Report No.116D00113-RFA No.116D00113-RFA-01 No.116D00113-EMC No.116241 276-GTE01 No.116D00213-EMC No.I16D00213-SAR BL-SZ1690342-501-

If you have any question or concerns, please contact us. Atsushi Tomiyama General Manager of Quality Assurance Department Phone: +81 6 6793 8424 E-Mail: world_support@icom.co.jp