INSTRUCTIONS Bluetooth UNIT UT-133 Thank you for purchasing the UT-133 Bluetooth UNIT. Installing the UT-133 in a transceiver allows you to use a variety of Bluetooth devices. Please read this instructions carefully and complete-
ly before installing the UT-133. About the UT-133 Precautions The UT-133 is a Bluetooth unit to be installed in a trans-
ceiver to communicate with other Bluetooth devices. Please refer to the transceivers instruction manual for de-
tails regarding installation and use of the UT-133 with the transceiver. UT-133 Bluetooth Transceiver VS-3 Android device
(third party) The Bluetooth communication range may vary, depending on the environment in which the device operates. Micro-
wave ovens or wireless LAN may cause an interference. In that case, stop using those devices or move away the Bluetooth device from the other devices. This Bluetooth device has a range of use. If the communi-
cation is unstable, use the device within the range. DO NOT put anything on top of the unit, before installing. DO NOT drop, impact or vibrate the unit, before installing. This may damage to the unit. You may not be able to use some Bluetooth devices func-
tion, even if the unit is installed. Electromagnetic Interference Radio operator warnings When you use a Bluetooth device, pay attention to follow-
ing:
Bluetooth devices operate on the 2.4 GHz band. The 2.4 GHz band is also used by other devices, such as wireless LAN products, microwave ovens, RFID systems, amateur radio stations, and so on. When using a transceiver with the UT-133 installed and turned ON near such devices, interference may occur, caus-
ing a decrease in communication speed, and an unstable connection. In such cases, use the transceiver with the UT-133 away from the other devices, or stop using those devices.
turned ON near medical equipment, or near a person who has a pacemaker. Radio waves from the transceiver may cause interference, or endanger their life.
turned ON near microwave ovens. Interference may occur.
Specications
version: Bluetooth Version 3.0
devices:
8 devices*
* You can pair with up to 8 headsets and data devices. The 8 paired devices can-
not be all headsets or all data devices.
obligations. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United King-
dom, Germany, France, Spain, Russia and/or other countries. The Bluetooth work mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Icom inc. is under license. All other products or brands are registered trademarks or trade-
marks of their respective holders. FCC and IC information
This equipment has been tested and found to comply with
the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
ceiver.
-
ent from that to which the receiver is connected.
-
cian for help.
-
pressly approved by Icom Inc., could void your authority to operate this device under FCC regulations.
-
the following two conditions: (1) this device may not cause in-
terference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This transmitter must not be co-located or operated in con-
CAN ICES-3 (B)
-
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet metteur ne doit pas tre co-localis ou fonctionner en
NMB-3 (B)
limits set forth for an uncontrolled environment and meets
equipment has very low levels of RF energy that it deemed
(MPE).
rayonnements nonces pour un environnement non contrl
lignes directrices d-
es radiolectriques (RF) CNR-102 de lIC. Cet quipement
limits set forth for an uncontrolled environment and meets
equipment has very low levels of RF energy that are deemed
rayonnements nonces pour un environnement non contrl
lignes directrices d radiolectriques (RF) CNR-102 de lIC. Cet quipement met
After installing the UT-133, place the FCC/IC ID label on the outside of the transceiver. About CE Versions of the UT-133 which display the CE symbol on the serial number label, comply with the essential requirements of the Radio and Telecommunications Terminal Equipment Di-
use of certain hazardous substances in electri-
EU. You can get the DOC (Declaration Of Conformity) from your nearest Icom dealer. See the Icom website for details of your nearest dealer.
A-7142W-1EX 2014 Icom Inc.