all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Updated User Manual Page | Users Manual | 250.20 KiB | ||||
1 2 |
|
User Manual | Users Manual | 788.65 KiB | June 03 2012 | |||
1 2 |
|
User Manual Cut Antenna | Users Manual | 98.86 KiB | June 03 2012 | |||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | External Photos | |||||||
1 2 | External Photos | June 03 2012 | ||||||
1 2 | Cover Letter(s) | June 03 2012 | ||||||
1 2 | Cover Letter(s) | June 03 2012 | ||||||
1 2 | Attestation Statements | June 03 2012 | ||||||
1 2 | Attestation Statements | June 03 2012 | ||||||
1 2 | ID Label/Location Info | June 03 2012 | ||||||
1 2 | RF Exposure Info | June 03 2012 | ||||||
1 2 | RF Exposure Info | June 03 2012 |
1 2 | Updated User Manual Page | Users Manual | 250.20 KiB |
i ZZ OPTIONS
& BATTERY PACK Battery pack | Voltage Battery life*'
2250 mAh (min.) BP-232WP 2300 mAh (typ.) 17.5 hrs.
*1 When the power save function is turned ON, and the operating periods are calculated under the following conditions;
TX: RX: standby =5:5:90
*2 Operating period depends on the alkaline cells used. CHARGERS BC-119N DESKTOP CHARGER + AD-106 CHARGER ADAPTER
+ BC-145S Ac ADAPTER For rapid charging of battery packs. An AC adapter is sup-
plied with the charger depending on versions. Charging time: approximately 3 hours when BP-232WP is at-
tached. BC-121N MULTI-CHARGER + AD-106 CHARGER ADAPTER (6 pcs.)
+ BC-157S AC ADAPTER For rapid charging of up to 6 battery packs (six AD-106s are required) simultaneously. An AC adapter should be pur-
chased separately. Charging time: approximately 3. hours when BP-232WP is at-
tached. BC-160 DESKTOP CHARGER + BC-145S AC ADAPTER For rapid charging of battery packs. An AC adapter is sup-
plied with the charger depending on versions. Charging time: approximately 3 hours when BP-232WP is at-
tached. BC-171 DESKTOP CHARGER + BC-147S Ac ADAPTER An AC adapter is supplied with the charger depending on versions. Charging time: approximately 10 hours when BC-232WP is at-
tached. DC CABLES CP-23L CIGARETTE LIGHTER CABLE Allows charging of the battery pack through a 12 V cigarette lighter socket. (For BC-160/BC-171/BC-119N) OPC-515L/OPC-656 DC POWER CABLES Allows charging of the battery pack using a 13.8 V power source instead of the AC adapter. OPC-515L: For BC-160/BC-171/BC-119N OPC-656 : For BC-121N BELT CLIPS MB-93 SWIVEL BELT CLIP MB-94 BELT CLIP Exclusive alligator-type belt clip. The same as supplied with the transceiver. MB-96N/96F LEATHER BELT HANGER
1 2 | User Manual | Users Manual | 788.65 KiB | June 03 2012 |
INSTRUCTION MANUAL VHF TRANSCEIVERS iF3031S iF3033S iF3036S UHF TRANSCEIVERS iF4031S iF4033S iF4036S This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. The photo shows the VHF transceiver EXPLICIT DEFINITIONS WORD RDANGER!
RWARNING!
CAUTION NOTE DEFINITION Personal death, serious injury or an ex-
plosion may occur. Personal injury, fire hazard or electric shock may occur. Equipment damage may occur. If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. IMPORTANT READ ALL INSTRUCTIONS carefully and com-
pletely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This instruction manual contains important oper ating instructions for the IC-F3031S, IC-F3033S, IC-F3036S VHF TRANS-
CEIVERS and the IC-F4031S, IC-F4033S, IC-F4036S UHF TRANSCEIVERS. This instruction manual includes some functions which are usable only when they are pre-programmed by your dealer. Ask your dealer for details. For Canada:
This device complies with RSS-310 of Industry Canada. Op-
eration is subject to the condition that this device does not cause harmful interference. Cet appareil est conforme au CNR-310 dIndustrie Canada. Son exploitation est autorise sous rserve que lappareil ne cause pas de brouillage prjudiciable. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. i PRECAUTIONS R DANGER! NEVER short the terminals of the battery pack. R DANGER! Use and charge only specified Icom bat-
tery packs with Icom radios or Icom chargers. Only Icom bat-
tery packs are tested and approved for use with Icom radios or charged with Icom chargers. Using third-party or coun-
terfeit battery packs or chargers may cause smoke, fire, or cause the battery to burst. R WARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 5 to 10 cm
(2 to 4 inches) away from the lips and the transceiver is verti-
cal. R WARNING! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. Hearing experts advise against continuous high volume op-
eration. If you experience a ringing in your ears, reduce the volume level or discontinue use. R WARNING! NEVER operate the transceiver while driving a vehicle. Safe driving requires your full attention anything less may result in an accident. CAUTION: MAKE SURE the flexible antenna, bat-
tery pack and jack cover are securely attached to the trans-
ceiver, and that the antenna and battery pack are dry before attachment. Exposing the inside of the transceiver to dust or water will result in serious damage to the transceiver. DO NOT operate the transceiver near unshielded electri-
cal blast ing caps or in an explosive atmosphere. DO NOT push [PTT] when not actually intending to transmit. DO NOT use or place the transceiver in direct sunlight or in areas with temperatures below 30C (22F) or above
+60C (+140F). The basic operations, transmission and reception of the transceiver are guaranteed within the specified operating temperature range. However, the LCD display may not be operate correctly, or show an indication in the case of long hours of operation, or after being placed in extremely cold areas. DO NOT modify the transceiver. The transceiver warranty does not cover any problems caused by unauthorized modification. DO NOT use harsh solvents such as benzine or alcohol when cleaning, as they will damage the transceiver surfaces. BE CAREFUL! The transceiver will become hot when operating it continuously for long periods of time. ii PRECAUTIONS (Continued) FCC INFORMATION FOR CLASS A UNINTENTIONAL RADIATORS:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. BE CAREFUL! The IC-F3031S, IC-F3033S, IC-F3036S, IC-F4031S, IC-F4033S and IC-F4036S meet IP67* require-
ments for dust-tight and waterproof protection. However, once the transceiver has been dropped, dust-tight and water-
proof protection cannot be guaranteed because of possible damage to the transceivers case or the waterproof seal.
* Only when the jack cover or the optional HM-168LWP is attached. Even when the transceiver power is OFF, a slight current still flows in the circuits. Remove the battery pack or batteries from the trans ceiver when not using it for a long time. Other-
wise, the installed battery pack or batteries will become ex-
hausted, and will need to be recharged or replaced. MAKE SURE to turn the transceiver power OFF before connect ing the supplied/optional equipment. For U.S.A. only:
CAUTION: Changes or modifications to this transceiver, not expressly approved by Icom Inc., could void your authority to operate this transceiver under FCC regulations. iii TABLE OF CONTENTS IMPORTANT .......................................................................... i EXPLICIT DEFINITIONS ....................................................... i PRECAUTIONS .................................................................... ii FCC INFORMATION ........................................................... iii TABLE OF CONTENTS ....................................................... iv 1 ACCESSORIES ...........................................................12
...................................................1
................................................1 Supplied accessories Accessory attachments 2 PANEL DESCRIPTION ................................................37
...................................................................3
...........................................................4
........................................5 Front panel Function display Programmable function keys 3 BASIC OPERATION ..................................................814
........................................................8
........................................................9
..............................................................9
.........................................10
............................................................12
..........................................................12
........................................13
........................................13
..............................................................13
.....................................................13
.....................................14 Turning power ON Channel selection Call procedure Receiving and transmitting User set mode Emergency Call Priority A channel selection Man Down Emergency Call Stun function Scrambler function MDC 1200 system operation 4 BATTERY CHARGING ............................................1519
.......................................................................15
...........................................17 Caution Optional battery chargers 5 OPTIONAL SWIVEL BELT CLIP ............................2021
..........................................................20
....................................................................20
...................................................................21 MB-93 contents Attaching Detaching 6 SPEAKER MICROPHONE ............................................22
..............................22
.................................................................22 Optional HM-168LWP description Attachment 7 OPTIONS .................................................................2324 8 SAFETY TRAINING INFORMATION .......................2526 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 iv 1 ACCESSORIES Supplied accessories NOTE: Some accessories are not supplied with depending on versions. Battery pack Belt clip Flexible antenna Accessory attachments Flexible antenna D Connect the supplied flexible antenna to the antenna connector. CAUTION:
NEVER carry the transceiver by holding the antenna. DO NOT connect the antenna other than listed on page 24. Transmitting without an antenna may damage the transceiver. 1 Battery pack D To attach the battery pack:
Slide the battery pack in the direction of the arrow (q) until the battery release button makes a click sound. NOTE: Push on the bottom of the pack to make sure the release button is firmly locked. To release the battery pack:
Slide the battery release button in the direction of the arrow
(w) as shown below. The battery pack is then released. NEVER release or attach the battery pack when the trans-
ceiver is wet or soiled. This may result water or dust get-
ting into the transceiver/battery pack and may result in the transceiver being damaged. q w Battery release button NOTE: Keep the battery terminals clean. It's a good idea to regularly clean them. Belt clip D To attach the belt clip:
q w Slide the belt clip in the direction of the arrow until the belt Release the battery pack if it is attached. clip is locked and makes a click sound. To detach the belt clip:
q w Release the battery pack if it is attached. Pinch the clip (
the arrow (w). q), and slide the belt clip in the direction of w q ACCESSORIES 1 Jack cover D To attach the jack cover:
q Attach the jack cover to the [MIC/SP] jack. w Tighten the screws.
[MIC/SP] jack q w Jack cover CAUTION:
Attach the jack cover when the op-
tional speaker-microphone is not used. Use the supplied screws only. To detach the jack cover:
q Unscrew the screws using a phillips screwdriver. w Detach the jack cover for the speak-
er-microphone connection. q q w 1 2 2 PANEL DESCRIPTION Front panel o q w e r t i Speaker Microphone u y t DEALER-PROGRAMMABLE KEYS [Side2]/[Side3]
Desired functions can be programmed independently by your dealer. (p. 5) y DEALER-PROGRAMMABLE KEYS [P0] to [P3]
Desired functions can be programmed independently by your dealer. (p. 5) u FUNCTION DISPLAY (p. 4) Displays a variety of information such as an operating channel number/name, 2-tone code, DTMF numbers, se-
lected function and so on. i EXTERNAL MICROPHONE/SPEAKER JACK Connect an optional speaker-microphone. NOTE: Connect or disconnect the optional equipment after the transceiver is turned OFF. q ANTENNA CONNECTOR Connects the supplied antenna. w DEALER-PROGRAMMABLE KEY [Emer]
Desired function can be programmed by your dealer. (p. 7) e DEALER-PROGRAMMABLE KEY [Side1]
Desired function can be programmed by your dealer.
(p. 5) r PTT SWITCH [PTT]
Push and hold to transmit; release to receive. 3 Jack cover NOTE: Attach the jack cover when the optional equipment is not used. See (p. 2) for details. o VOLUME CONTROL [VOL]
Rotate to turn the power ON/OFF and adjusts the audio level. PANEL DESCRIPTION 2 y SCRAMBLER INDICATOR Appears when the voice scrambler function is activated. u BELL INDICATOR Appears or blinks when the specific 2-tone code is re-
ceived, according to the pre-programming. Appears during the key lock function is ON. i KEY LOCK INDICATOR o BATTERY INDICATOR Appears or blinks when the battery power decreases to a specified level.
!0 ALPHANUMERIC DISPLAY Displays an operating channel number, channel name, Set mode contents, DTMF code, etc. Function display q trew y u i o
!0 q TRANSMIT INDICATOR Appears while transmitting. w BUSY INDICATOR Appears while the channel is busy. e SIGNAL STRENGTH INDICATOR r LOW POWER INDICATOR Appears when low output power is selected. Indicates relative signal strength level. When the battery power decreases to a specified level, low power is selected automatically. t AUDIBLE INDICATOR Appears when the channel is in the audible (unmute) condition. Appears when the specified 2-tone code is received. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4 2 PANEL DESCRIPTION Programmable function keys The following functions can be assigned to [Emer], [Side1],
[Side2], [Side3], [P0], [P1], [P2] and [P3] programmable function keys. Consult your Icom dealer or system operator for details con-
cerning your transceivers programming. If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the function depends on the programming. CH UP AND DOWN KEYS Push to select an operating channel. Push to select a transmit code channel after pushing [TX Code CH Select]. Push to select a DTMF channel after pushing [DTMF Au-
todial]. Push to select a scan group after pushing and holding
[Scan A Start/Stop]/[Scan B Start/Stop] for 1 second. SIREN KEY Push to emit a siren. ZONE KEY Push this key, then push [CH Up] or [CH Down] to select the desired zone. What is zone? The desired channels are assigned into a zone according to the intended use for grouping. For example, Staff A and Staff B are assigned into a Business zone, and John and Cindy are assigned into a Private zone. 5 SCAN A KEY This keys operation depends on the Power ON Scan set-
ting. When the power ON scan function is turned OFF;
Push to start and cancel scanning operation. In case of transmission during scan, scanning will be cancelled. When the power ON scan function is turned ON;
Push to pause scanning, then resumes scanning after passing a specified time period. In case of transmission during scan, scanning will be cancelled. Push and hold this key for 1 second to indicate the scan group, then push [CH Up] or [CH Down] to select the de-
sired group. SCAN B KEY Push to start and cancel scanning operation. In case of transmission during scan, scanning will be paused. Then resumes scanning after passing a specified time period. Push and hold this key for 1 second to indicate the scan group, then push [CH Up] or [CH Down] to select the de-
sired group. PRIO A/B KEYS Push to select Priority A or Priority B channel. Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 second to reassign the operating channel to Priority A or Priority B channel. SCAN ADD/DEL (TAG) KEY Push to add a channel to, or delete it from the current scan list. When a channel is added to the current scan list, the display shows SCAN ON. When a channel is deleted from the current scan list, the display shows SCAN OFF. After showing SCAN ON or SCAN OFF, the display shows the current scan list text. You can add a channel to, or delete it from the scan list after selecting the list. 1. Hold down for 1 second to display the current scan list, and then push [CH Up] or [CH Down] to select a desired list. 2. Push this key to add a channel to, or delete it from the selected list. 3. Hold down this key for 1 second to exit the scan list selection mode. Push this key while a scan is paused on a channel, except for primary or secondary channel, and then the channel is deleted from the scan list. Depending on the setting, the deleted channel is added to the scan list again after the scan is cancelled. (Nuisance Delete function) C.TONE CH ENT KEY Push to select the continuous tone channel using [CH Up]/
[CH Down] to change the tone frequency/code setting. The selected channel remains set as the continuous tone channel until another channel is designated as such. PANEL DESCRIPTION 2 MR-CH 1/2/3/4 KEYS Push to select memory channels 1 to 4 in the operating zone directly. MONI KEY Mute and release the CTCSS (DTCS) or 2-tone squelch mute. Open any squelch/deactivate any mute while pushing and holding this key. LOCK KEY Push and hold for 1 second to electronically lock all pro-
grammable keys except the following:
[Call] (incl. Call A and Call B), [Moni], [Emergency], [Sur-
veillance], [Siren], [Lone Worker] and [OPT 1/2/3]. Push and hold for 1 second again to turn the lock function OFF. HIGH/LOW KEY Push to select the transmit output power temporarily or per-
manently, depending on the presetting. Ask your dealer for the output power level for each selection. OPT MOMENTARY KEYS Controls the output signal level of the optional ports in the optional unit connector while pushing and holding this key. OPT OUT KEYS Push to control the output signal level of the optional ports in the optional unit connector. SCRAMBLER FUNCTION Push to toggle the voice scrambler function ON and OFF. 2 6 2 PANEL DESCRIPTION TALK AROUND KEY Push to turn the talk around function ON and OFF. The talk around function equalizes the transmit frequency to the receive frequency for transceiver-to-transceiver communication. WIDE/NARROW KEY Push to toggle the IF bandwidth between wide and narrow. DTMF AUTODIAL KEY Push to enter the DTMF channel selection mode. Then se-
lect the desired DTMF channel using [CH Up]/[CH Down]. After selecting the desired DTMF channel, push this key to transmit the DTMF code. RE-DIAL KEY Push to transmit the last-transmitted DTMF code. CALL KEYS Push to transmit a 2-tone. Call transmission is necessary before you call another station de-
pending on your signaling system.
[Call A] and/or [Call B] may be available when your system em-
ploys selective Individual/Group calls. Ask your dealer which call is assigned to each key. LONE WORKER KEY Push to turn the Lone Worker function ON or OFF. If the Lone Worker function is activated, the Emergency function is automatically turned ON after the specified time period has passed with no operation is performed. TX CODE CHANNEL UP/DOWN KEYS Push to select a TX code channel directly. 7 EMERGENCY KEY Push and hold to transmit the emergency call. The transceiver can transmit the emergency call silently or audibly depending on the presetting. Ask your dealer for details. When the emergency call transmits with beeps, the emergency text is displayed on the LCD if programmed. If you want to cancel the emergency call, push and hold the key again before transmitting the call. The emergency call is transmitted one time only or repeatedly until receiving a control code, depending on the presetting. SURVEILLANCE KEY Push to turn the surveillance function ON or OFF. When this function is turned ON, the beep is not emitted and the LCD backlight does not light when a signal is received or a key is pushed, etc. TX CODE CHANNEL SELECT KEY Push to enter the ID code channel selection mode directly. Then set the desired channel using [CH Up]/[CH Down].
(p. 11) USER SET MODE KEY Push and hold for 1 second to enter user set mode. During in the user set mode, push this key to select an item that is enabled by your dealer, and change the value or condition by pushing [CH Up] or [CH Down]. Push and hold this key for 1 second again to exit user set mode. User set mode is also available via the Power ON function. Refer to page 8 also. Turning power ON Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation.
(p. 17) Rotate [VOL] to turn the power ON. q w If the transceiver is programmed for a start up password, input the digit codes as directed by your dealer. 10-keypad can be used for password input depending on ver-
sion:
The keys in the table below can be used for password input:
The transceiver detects numbers in the same block as identi-
cal. Therefore 01234 and 56789 are the same. BASIC OPERATION 3 Battery type selection D The battery type must be selected according to the attaching battery type when turning the transceiver ON. Ask your dealer for details. q w Turn the power OFF. While pushing and holding [Emer] and [PTT], turn the power ON with rotating [VOL] to toggle the attaching bat-
tery type. After the display appears, release [Emer] and [PTT]. DRY BATT is displayed for about 3 seconds then L appears when the battery case operation is selected. In this case, the transmit output power is low. LI-ION is displayed for about 3 seconds when the Lithium-ion battery operation is selected.
[VOL]
[Side3]
[P0]/[P1]/
[P2]/[P3]
KEY Side3 NUMBER 0 5 1 6 2 7 3 8 4 9
[VOL]
[Emer]
[PTT]
Appears Dry battery mode e When the PASSWORD indication does not clear after inputting 4 digits, the input code number may be incorrect. Turn the power off and start over in this case. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 8 Call procedure When your system employs tone signaling (excluding CTCSS and DTCS), the call procedure may be necessary prior to voice transmission. The tone signaling employed may be a selective calling system which allows you to call specific station(s) only and prevent unwanted stations from contacting you. q Select the desired TX code channel or 2-tone code ac-
cording to your System Operators instructions. This may not be necessary depending on programming. Refer to page 13 for selection. w Push the call key (assigned to one of the dealer program-
mable keys: [Emer], [Side1], [Side2], [Side3], [P0], [P1],
[P2] and [P3]) or [PTT]. After transmitting a 2-tone code, the remainder of your communication can be carried out in the normal fashion. e Selective calling Non-selective calling 3 BASIC OPERATION Channel selection Several types of channel selections are available. Methods may differ according to your system set up. NON-ZONE TYPE:
Push [CH Up] or [CH Down] to select the desired operating channel, in sequence; or, push one of [MR-CH 1] to [MR-CH 4]
keys to select a channel directly. ZONE TYPE:
Push [Zone], then push [CH Up] or [CH Down] to select the desired zone. AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turn-
ing power ON, the transceiver automatically starts scanning. Scanning stops when receiving a call. 9 Receiving and transmitting CAUTION: Transmitting without an antenna may damage the transceiver. See page 1 for accessory attachments. Receiving:
q w Rotate [VOL] to turn the power ON. Push [CH Up] or [CH Down] to select the conventional sys-
tem channel, in sequence. e When receiving a call, adjust the audio output level to a comfortable listening level. NOTE: When a matched RX code signal is received, audio from the microphone is automatically transmitted for a specified time period.*
* Depending on the presetting. Ask your dealer for details. Transmitting:
Wait for the channel to become clear to avoid interference. q Push [Call] when initiating a call from your side. Coded audio may be heard from the transceiver, then ap-
pears. This operation may not be necessary depending on your sig-
naling system. Ask your dealer for details. While pushing and holding [PTT], speak into the micro-
phone at a normal voice level. Release [PTT] to return to receive. w e IMPORTANT: To maximize the readability of your signal;
1. Pause briefly after pushing [PTT]. 2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, then speak into the microphone at a normal voice level. BASIC OPERATION 3 Transmitting notes D Transmit inhibit function The transceiver has several inhibit functions which restrict transmission under the following conditions:
- The channel is in mute condition (Inaudible condition;
does not appear.)
- The channel is busy.
- Un-matched (or matched) CTCSS is received.
(Depending on the presetting.)
- The selected channel is a receive only channel. Time-out timer After continuous transmission for the pre-programmed time period, the time-out timer is activated, causing the transceiv-
er to stop transmitting. Penalty timer Once the time-out timer is activated, transmission is further inhibited for a period determined by the penalty timer. PTTID call The transceiver sends the ID code (DTMF or digital ANI) au-
tomatically when [PTT] is pushed (beginning of transmission) and released (end of transmission) depends on the setting. 3 10 DTMF transmission D If the transceiver has [DTMF Autodial] assigned to it, the automatic DTMF transmission function is available. Up to 8 DTMF channels are available. TO SELECT A TX CODE:
q w Push [CH Up] or [CH Down] to select the desired DTMF Push [DTMF Autodial] a DTMF channel appears. e channel. Push [DTMF Autodial] to transmit the DTMF code in the selected DTMF channel. 3 BASIC OPERATION TX code channel selection D If the transceiver has [TX Code CH Select] assigned to it, the indication can be toggled between the operating channel number (or name) and TX code channel number (or name). When the TX code channel number (or name) is displayed,
[CH Up] or [CH Down] selects the TX code channel. USING [TX CODE CH SELECT] KEY:
q Push [TX Code CH Select] a TX code channel number
(or name) appears. w Push [CH Up] or [CH Down] to select the desired TX code channel. Push [TX Code CH Select] again to return to the operating channel number indication. e Push [Call] to transmit the selected TX code. USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:
If the transceiver has [TX Code CH Up] or [TX Code CH Down] assignment, the programmed TX code channel can be selected directly when pushed. 11 User set mode User set mode is accessed at power ON and allows you to set seldom-changed settings. In this case you can custom-
ize the transceiver operation to suit your preferences and operating style. Entering the user set mode:
q While pushing and holding [Side2] and [Side3], rotate
[VOL] to turn the power ON. Then, push and hold [P0] for 1 second to enter user set mode. w Push [P0] several times to select the appropriate item. Then push [CH Up] or [CH Down] to set the desired level/
condition. Available set mode functions are Backlight, Beep, Beep Level, SQL Level, Mic Gain, Battery Voltage, Signal Moni and Lone Worker. e Rotate [VOL] to turn the power OFF to exit user set mode. NOTE: User set mode is also available via a programma-
ble function key. Refer to USER SET MODE KEY. (p. 7) BASIC OPERATION 3 Emergency Call When [Emergency] is pushed for the specified time period*, the emergency signal is transmitted once, or repeatedly, on the specified emergency channel. A repeat emergency signal is automatically transmitted until the transceiver receives an acknowledgement signal, or you turn the transceiver power OFF. When no emergency channel is specified, the signal is transmitted on the previously selected channel. If you want to cancel the emergency call, hold down [Emergency]
again before transmitting the call. If your transceiver is programmed for Silent operation, you can trans-
mit an Emergency call without the beep sounding and the LED indi-
cator lighting. IMPORTANT: It is recommended to set an emergency channel individually to provide the certain emergency call operation.
* Depending on the presetting. Ask your dealer for details. D NOTES Depending on the presetting, the following functions are au-
tomatically activated. Ask your dealer for details. Auto TX function After the emergency call transmission, audio from the micro-
phone is automatically transmitted for a specified time period.*
Auto RX function After the emergency call transmission, the transceiver stands by in the audible mode for the specified time period.*
3 12 3 BASIC OPERATION Priority A channel selection Depending on the presetting, the Priority A channel is se-
lected each time the transceiver power is turned ON. Man Down Emergency Call This function requires the optional UT-124R man down unit. When the transceiver has been left in a horizontal position for the specified time period*, the transceiver enters the emer-
gency mode, and then the countdown starts. After the specified time period* has passed, an emergency call is automatically transmitted once, or repeatedly. If the transceiver is placed in a vertical position before the first transmission, the transceiver exits the emergency mode and the emergency call is cancelled. IMPORTANT: It is recommended to set an emergency channel individually to provide the certain emergency call operation.
* Depending on the presetting. Ask your dealer for details. Stun function When the specified ID, set as a stun ID or kill ID, is received, the stun function is activated. When the stun ID is received, the transceiver becomes unus-
able. Entering of the password (p. 8) or receiving a specified ID, set as a revive ID, is necessary to operate the transceiver again in this case. When the kill ID is received, the transceiver switches to the cloning required condition. Cloning the transceiver is neces-
sary to operate the transceiver again in this case. Stun function is also available with the MDC 1200 signaling system. (p. 14) Scrambler function The voice scrambler function provides private communica-
tion between stations. The optional Rolling or Non-rolling type can be available. q w Push [Scrambler] again to turn the scrambler function Push [Scrambler] to turn the scrambler function ON. appears. OFF. disappears. 13 MDC 1200 system operation The MDC 1200 signaling system enhances your transceiv-
ers capabilities. It allows PTT ID*, Emergency signaling, and receiving Radio Check. Also, the dispatcher can stun and re-
vive transceivers on the system.
* When [PTT] is pushed and/or released, the transceiver transmits your station ID. Transmitting an Emergency Call D The MDC 1200 systems Emergency feature can be ac-
cessed using the [Emergency] key (p. 7). The transceiver will send an Emergency MDC 1200 system command once, or repeatedly for a programmed number of times until it receives the acknowledgement signal. The emergency call can be transmitted without a beep sound depending on how the emergency function is programmed. Ask your dealer for details. BASIC OPERATION 3 D q Receiving an Emergency Call When an emergency call is received;
Beeps sound. The calling station alias and EMG EMG are displayed alter-
3 nately. w Turn power OFF, change the channel, push [PTT] for reply-
ing the call, etc. to stop the beep and display indication. Receiving a Stun and Revive D The dispatcher can send MDC 1200 system signals that will stun or revive your transceiver. If a Stun command is re-
ceived that matches your station ID, the transceiver will dis-
play SORRY (default) and you can not receive or transmit. When a Revive command is received that matches your sta-
tion ID, normal operation is restored. 14 4 BATTERY CHARGING Caution Misuse of Lithium-ion batteries may result in the following hazards: smoke, fire, or the battery may rupture. Misuse can also cause damage to the battery or degradation of battery performance. R DANGER! Use and charge only specified Icom battery packs with Icom radios or Icom charger. Only Icom battery packs are tested and approved for use and charge with Icom radios or Icom charger. Using third-party or counterfeit bat-
tery packs or charger may cause smoke, fire, or cause the battery to burst. Battery caution R DANGER! DO NOT hammer or otherwise impact the bat-
tery. Do not use the battery if it has been severely impacted or dropped, or if the battery has been subjected to heavy pressure. Battery damage may not be visible on the outside of the case. Even if the surface of the battery does not show cracks or any other damage, the cells inside the battery may rupture or catch fire. R DANGER! NEVER use or leave battery packs in areas with temperatures above +60C (+140F). High temperature buildup in the battery, such as could occur near fires or stoves, inside a sun heated car, or in direct sunlight may cause the battery to rupture or catch fire. Excessive temperatures may also degrade battery performance or shorten battery life. R DANGER! DO NOT expose the battery to rain, snow, sea-
water, or any other liquids. Never charge or use a wet battery. If the battery gets wet, be sure to wipe it dry before using. R DANGER! NEVER incinerate used battery packs since in-
ternal battery gas may cause them to rupture, or may cause an explosion. R DANGER! NEVER solder the battery terminals or NEVER modify the battery pack. This may cause heat generation, and the battery may rupture, emit smoke or catch fire. R DANGER! Use the battery only with the transceiver for which it is specified. Never use a battery with any other equipment, or for any purpose that is not specified in this in-
struction manual. R DANGER! If fluid from inside the battery gets in your eyes, blindness can result. Rinse your eyes with clean water, with-
out rubbing them, and see a doctor immediately. 15 BATTERY CHARGING 4 R WARNING! Immediately stop using the battery if it emits an abnormal odor, heats up, or is discolored or deformed. If any of these conditions occur, contact your Icom dealer or distributor. R WARNING! Immediately wash, using clean water, any part of the body that comes into contact with fluid from inside the battery. R WARNING! NEVER put the battery in a microwave oven, high-pressure container, or in an induction heating cooker. This could cause a fire, overheating, or cause the battery to rupture. CAUTION: Always use the battery within the specified tem-
perature range, 20C to +60C (4F to +140F). Using the battery out of its specified temperature range will reduce the batterys performance and battery life. CAUTION: Shorter battery life could occur if the battery is left fully charged, completely discharged, or in an excessive tem-
perature environment (above +50C; +122F) for an extended period of time. If the battery must be left unused for a long time, it must be detached from the radio after discharging. You may use the battery until the remaining capacity is about half, then keep it safely in a cool dry place with the tempera-
ture range as below:
20C to +50C (4F to +122F) (within a month) 20C to +35C (4F to +95F) (within three months) Charging caution D R DANGER! NEVER charge the battery pack in areas with extremely high temperatures, such as near fires or stoves, inside a sun heated car, or in direct sunlight. In such environ-
ments, the safety/protection circuit in the battery will activate, causing the battery to stop charging. R WARNING! NEVER charge or leave the battery in the bat-
tery charger beyond the specified time for charging. If the battery is not completely charged by the specified time, stop charging and remove the battery from the battery charger. Continuing to charge the battery beyond the specified time limit may cause a fire, overheating, or the battery may rup-
ture. R WARNING! NEVER insert the transceiver (battery at-
tached to the transceiver) into the charger if it is wet or soiled. This could corrode the battery charger terminals or damage the charger. The charger is not waterproof. CAUTION: NEVER charge the battery outside of the speci-
fied temperature range: BC-160 and BC-171 (0C to +45C;
+32F to +113F). BC-119N and BC121N (+10C to +40C;
+50F to +104F). Icom recommends charging the battery at
+20C (+68F). The battery may heat up or rupture if charged out of the specified temperature range. Additionally, battery performance or battery life may be reduced. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 16 4 BATTERY CHARGING Optional battery chargers Rapid charging with the BC-160 D The optional BC-160 provides rapid charging of the Li-ion battery pack. An AC adapter (may be supplied with BC-160 depending on ver-
sion) or the DC power cable (OPC-515L/CP-23L) is additionally required. Battery pack Transceiver Turn power OFF Regular charging with the BC-171 D The optional BC-171 provides regular charging of the Li-ion battery pack. An AC adapter (may be supplied with BC-171 depending on ver-
sion) or the DC power cable (OPC-515L/CP-23L) is additionally required. Battery pack Transceiver Turn power OFF AC adapter
(Not supplied with some versions.)
Optional OPC-515L
(for 13.8 V power source) or CP-23L
(for 12 V cigarette lighter socket) can be used instead of the AC adapter. AC adapter
(Not supplied with some versions.)
Optional OPC-515L
(for 13.8 V power source) or CP-23L
(for 12 V cigarette lighter socket) can be used instead of the AC adapter.
CAUTION: NEVER connect the OPC-
515L to a power source using reverse polarity. This will ruin the battery charger. White line: Black line :
CAUTION: NEVER connect the OPC-
515L to a power source using reverse polarity. This will ruin the battery charger. White line: Black line :
17 AD-106 installation D The AD-106 charger adapter must be installed into the BC-
119N or BC-121N before battery charging. Connect the AD-106 charger adapter and the BC-119N/
BC-121N as below, then install the AD-106 into the hold-
er space of the BC-119N or BC-121N with the supplied screws. AD-106 Connectors BATTERY CHARGING 4 Rapid charging with the BC-119N+AD-106 D The optional BC-119N provides rapid charging of the Li-ion battery pack. The following items are additionally required. AD-106 charger adapter An AC adapter (may be supplied with BC-119N depending on ver-
sion) or the DC power cable (OPC-515L/CP-23L). Transceiver Turn power OFF AC adapter
(Not supplied with some versions.) Battery pack Screws supplied with the charger adapter AD-106 charger adapter is installed in BC-119N. Plugs
* This illustration is described with the BC-119N.
Optional OPC-515L
(for 13.8 V power source) or CP-23L
(for 12 V cigarette lighter socket) can be used instead of the AC adapter.
CAUTION: NEVER connect the OPC-
515L to a power source using reverse polarity. This will ruin the battery charger. White line: Black line :
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 4 BATTERY CHARGING Rapid charging with the BC-121N+AD-106 D The optional BC-121N allows up to 6 Li-ion battery packs to be charged simultaneously. The following items are addition-
ally required. Six AD-106 charger adapters An optional AC adapter or the DC power cable (OPC-656) Transceiver Turn power OFF Battery pack AC adapter
(Purchased separately) AD-106 charger adapters are installed in each slot. IMPORTANT: Battery charging caution Ensure the guide tabs on the battery pack are correctly aligned with the guide rails inside the charger adapter.
(This illustration is described with the BC-160.) Tabs Guide rail DC power cable (OPC-656)
(Connect with the DC power supply; 13.8 V/at least 7 A)
*Abou the OPC-656 Red line : Black line :
19 OPTIONAL SWIVEL BELT CLIP 5 MB-93 contents Qty. q Belt clip ...........................................................................1 w Base clip .........................................................................1 q w r Clip the belt clip to a part of your belt. And insert the trans-
ceiver into the belt clip until the base clip inserted fully into the groove. Attaching Release the battery pack if it is attached. (p. 2) q w Slide the base clip in the direction of the arrow until the base clip is locked and makes a click sound. t Once the transceiver is locked in place, it swivels as illus-
trated below. e Attach the battery pack. (p. 2) Once the transceiver is locked in place, it will swivel 360 degrees. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 20 5 OPTIONAL SWIVEL BELT CLIP Detaching q Turn the transceiver upside down in the direction of the arrow and pull out from the belt clip. Release the battery pack if it is attached. (p. 2) w e Pinch the clip (q), and slide the base clip in the direction of the arrow (w). q w CAUTION:
HOLD THE TRANSCEIVER TIGHTLY, WHEN HANGING OR DETACHING THE TRANSCEIVER FROM THE BELT CLIP. Otherwise the transceiver may not be attached to the holder or swivel properly if the transceiver is accidentally dropped and the base clip is scratched or damaged. 21 Optional HM-168LWP description Alligator type clip To attach the speaker-mic. to your shirt or collar, etc. PTT switch Transmits while pushed Receives while released Microphone Speaker Turn the transceiver power OFF when connecting the HM-168LWP. SPEAKER MICROPHONE 6 Attachment Attach the connector of the speaker-microphone into the [SP MIC] jack on the transceiver and tighten the screws with fin-
gers. NOTE: Use only your fingers instead of tools to tighten the screws. CAUTION: Attach the con-
nector snugly. A loose connection will al-
low water intrusion into the connector. Hand tighten NEVER immerse the connector in water. If the connector becomes wet, be sure to dry it BEFORE attaching it to the transceiver. NOTE: The microphone is located as shown in the dia-
gram above. To maximize the readability of your transmit-
ted signal (voice), hold the microphone approximately 5 to 10 cm (2 to 4 inches) from your mouth, and speak in a normal voice level. IMPORTANT: Keep the [SP MIC] jack cover attached to the transceiver when the speaker-microphone is not in use. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 22 7 OPTIONS D BATTERY PACK Battery pack Voltage BP-232WP 7.4 V Capacity Battery life*1 2250 mAh (min.) 2300 mAh (typ.) 17.5 hrs.
*1 When the power save function is turned ON, and the operating periods are calculated under the following conditions;
CHARGERS TX : RX : standby = 5 : 5 : 90
*2 Operating period depends on the alkaline cells used. D BC-119N desktop charger + AD-106 charger adapter
+ BC-145S ac adapter For rapid charging of battery packs. An AC adapter is sup-
plied with the charger depending on versions. Charging time: approximately 3 hours when BP-232WP is at-
tached. BC-121N multi-charger + AD-106 charger adapter (6 pcs.)
+ BC-157S ac adapter For rapid charging of up to 6 battery packs (six AD-106s are required) simultaneously. An AC adapter should be pur-
chased separately. Charging time: approximately 3 hours when BP-232WP is at-
tached. BC-160 desktop charger + BC-145S ac adapter For rapid charging of battery packs. An AC adapter is sup-
plied with the charger depending on versions. Charging time: approximately 3 hours when BP-232WP is at-
tached. 23 BC-171 desktop charger + BC-147S ac adapter An AC adapter is supplied with the charger depending on versions. Charging time: approximately 10 hours when BC-232WP is at-
tached. DC CABLES D CP-23L cigarette lighter cable Allows charging of the battery pack through a 12 V cigarette lighter socket. (For BC-160/BC-171/BC-119N) OPC-515L/OPC-656 dc power cables Allows charging of the battery pack using a 13.8 V power source instead of the AC adapter. OPC-515L: For BC-160/BC-171/BC-119N OPC-656 : For BC-121N BELT CLIPS D MB-93 swivel belt clip MB-94 belt clip Exclusive alligator-type belt clip. The same as supplied with the transceiver. MB-96N/96F leather belt hanger OPTIONS 7 Some options may not be available in some countries. Ask your dealer for details. Approved Icom optional equipment is designed for optimal performance when used with an Icom transceiver. Icom is not responsible for the destruction or damage to an Icom transceiver in the event the Icom transceiver is used with equipment that is not manufactured or approved by Icom. OPTIONAL UNITS D UT-96R 5 tone unit UT-108R dtmf decoder unit Provides pager and code squelch capabilities. UT-109R /UT-110R* voice scrambler units Non-rolling type (UT-109R)/Rolling type (UT-110R)* voice scrambler unit provides higher communication security.
*You can use the UT-110R as Non-rolling type. UT-124R man down unit Provides measure of safety when working in a hazardous environment, etc. OTHER OPTIONS D HM-168LWP speaker-microphone Combination speaker-microphone that provides convenient operation while hanging the transceiver from your belt. FA-SC25V/FA-SC55V/
FA-SC25U/FA-SC57U/FA-SC72U/
FA-SC55V: 150174 MHz FA-SC57U: 430470 MHz FA-SC62V: 150160 MHz FA-SC62V/FA-SC63V antennas FA-SC25V: 136150 MHz FA-SC25U: 400430 MHz FA-SC72U: 470520 MHz FA-SC63V: 155165 MHz FA-SC56VS/FA-SC57VS/FA-SC73US stubby antennas FA-SC56VS: 150162 MHz FA-SC73US: 450490 MHz FA-SC61VC/FA-SC61UC cut antennas FA-SC61VC: 136174 MHz FA-SC57VS: 160174 MHz FA-SC61UC: 380520 MHz 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 24 8 SAFETY TRAINING INFORMATION W ARNING Your Icom radio generates RF electromagnetic en-
ergy during transmit mode. This radio is designed for and classified as Occupational Use Only, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the General Population in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for Occupational Use Only. In addition, your Icom radio com-
plies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Ra-
dio Frequency Electromagnetic Fields. American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields RF and Microwave. The following accessories are authorized for use with this prod-
uct. Use of accessories other than those specified may result in RF exposure levels exceeding the FCC requirements for wire-
less RF exposure.; Belt Clip (MB-93, MB-94 and MB-96N/F), Rechargeable Li-ion Battery Pack (BP-232WP) and Speaker-
microphone (HM-168LWP). To ensure that your expose to RF electromagnetic energy is within the FCC allowable limits for occu-
pational use, always adhere to the following guide-
lines:
CAU TION 25 DO NOT operate the radio without a proper antenna attached, as this may damaged the radio and may also cause you to ex-
ceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or antenna specifi -
cally authorized by the manufacturer for use with this radio. DO NOT transmit for more than 50% of total radio use time (50%
duty cycle). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the TX indicator lights red. You can cause the radio to transmit by pressing the PTT switch. ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting and only use the Icom belt-clips listed on page 23 when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not exceeded. To provide the recipients of your transmission the best sound quality, hold the antenna at least 5 cm (2 inches) from your mouth, and slightly off to one side. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, your Icom radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are ex-
posed as consequence of their employment provided those per-
sons are fully aware of the potential for exposure and can exercise control over their exposure. Votre radio Icom produit une nergie lectromagntique de radiofrquences (RF), en mode de transmission. Cette radio est conue pour un usage professionnel seulement et classe comme tel, ce qui signifie quelle AVERTISSEMENT doit tre utilise uniquement dans le cadre d'un travail par des personnes conscientes des dangers et des mesures visant mi-
nimiser ces dangers. Elle NEST PAS conue pour une utilisation grand public, dans un environnement non contrl. Cet appareil a t valu et jug conforme, aux limites dexposition aux RF de la FCC, pour une utilisation grand public. En outre, votre radio Icom satisfait les normes et directives qui suivent en matire de niveaux d'nergie et dnergie lectromagntique de RF et dvaluation de tels niveaux en ce qui concerne lexposition humaine:
Supplment C, dition 97-01, du Bulletin OET n 65 de la FCC, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. Norme de lAmerican National Standards Institute (ANSI): IEEE C95.1-1992 sur les niveaux de scurit compatibles avec lexposition humaine aux champs lectromagntiques de radiofrquences (3 kHz 300 GHz). Norme de lANSI: IEEE C95.3-1992 sur la mthode dvaluation re-
commande du champ magntique potentiellement dangereux des radiofrquences et des micro-ondes. Les accessoires illustrs la p. 23-24 sont approuvs pour une utili-
sation avec ce produit. Lutilisation daccessoires autres que ceux pr-
ciss peut entraner des niveaux dexposition aux RF suprieures aux limites tablies par la FCC en matire dexposition aux RF sans fil. Afin de vous assurer que votre exposition une nergie lectromagntique de RF se situe dans les limites permises par la FCC pour une utilisation grand public, veuillez en tout temps respecter les directives suivantes:
MISE EN GARDE SAFETY TRAINING INFORMATION 8 NE PAS faire fonctionner la radio sans quune antenne approprie y soit fixe, car ceci risque d endommager la radio et causer une exposition suprieure aux limites tablies par la FCC. Lantenne approprie est celle qui est fournie avec cette radio par le fabricant ou une antenne spciale-
ment autorise par le fabricant pour tre utilise avec cette radio. NE PAS mettre pendant plus de 50 % du temps total dutilisation de lappareil (50 % du facteur d'utilisation). La notion 50% du facteur dutilisation sapplique galement au mode VOX/PTT. mettre pen-
dant plus de 50 % du temps total dutilisation peut causer une expo-
sition aux RF suprieure aux limites tablies par la FCC. Lorsque le voyant DEL rouge sallume, cette radio est en train dmettre. La radio mettra si vous appuyez sur le bouton du microphone. TOUJOURS tenir lantenne loigne dau moins 2,5 cm de votre corps au moment dmettre et utiliser uniquement lattache pour ceinture Icom illustre la p. 23, lorsque vous attachez la radio votre ceinture, ou autre chose, de faon vous assurer de ne pas provoquer une ex-
position aux RF suprieure aux limites fixes par la FCC. Pour offrir vos interlocuteurs la meilleure qualit de transmission possible, tenez lantenne au moins 5 cm de votre bouche et lgrement de ct. Les renseignements ci-dessus fournissent lutilisateur toute linformation ncessaire sur lexposition aux RF et sur ce quil faut faire pour assurer que cette radio fonctionne en respectant les limites dexposition aux RF tablies par la FCC. Interfrence lectromagntique et compatibilit En mode de transmission, votre radio Icom produit de lnergie de RF qui peut provoquer des interfrences avec dautres appareils ou systmes. Pour viter de telles interfrences, mettez la radio hors tension dans les secteurs o une signalisation lexige. NE PAS faire fonctionner lmetteur dans des secteurs sensibles au rayonnement lectromagntique tels que les hpi-
taux, les aronefs et les sites de dynamitage. Usage professionnel/contrl Ce radio metteur est utilis dans des cas o des personnes sont exposes en raison de leur travail, pourvu quelles soient conscientes du risque dex-
position et quelles puissent exercer un contrle sur cette exposition. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 26 A-6995D-1EX Printed in Japan 2012 Icom Inc. Printed on recycled paper with soy ink. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
1 2 | User Manual Cut Antenna | Users Manual | 98.86 KiB | June 03 2012 |
FA-SC61UC Antenna Cutting Chart Antenna cap 360 MHz 380 MHz 400 MHz 420 MHz 440 MHz 460 MHz 480 MHz 500 MHz 520 MHz Thank you for purchasing the FA-SC61UC UHF ANTENNA. Please read these instructions thoroughly before using the FA-SC61UC. FA-SC61UC The optimum bandwidth is 8%
of the tuned frequency. For optimum performance tune to the center transmit frequency of the radio. Cutting Instructions q Align the bottom of the anten-
na onto the 0 position of the cutting guide diagram at left. w Mark the antenna at the length corresponding to the desired to be tuned. frequency e Cut the antenna to the marked length. Use a wire cutter that can cut at least 1.2 mm (d) of piano wire. r Apply adhesive to the top of the antenna and attach the supplied antenna cap. Use of Cemedine Co. Super-X No. 8008 black
(Icom number:
8950002910) or similar is recommended. parts NOTE:
Antenna cap must be inser ted after cutting the element otherwise water immersion makes the element damaged. Center frequency
(MHz) 360 380 400 420 440 460 480 500 520 Length
(mm) 185 175 165 156 148 142 136 129 125 0 CAUTION:
Making antenna cuts at other than the prescribed lengths specified could void the user's authority to operate the equipment. A-6532K-1EX-w Printed in Japan 2006-2009 Icom Inc.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-12-29 | 136 ~ 174 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Class II permissive change or modification of presently authorized equipment |
2 | 2012-03-06 | 136 ~ 174 | TNF - Licensed Non-Broadcast Transmitter Held to Face |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2012-12-29
|
||||
1 2 |
2012-03-06
|
|||||
1 2 | Applicant's complete, legal business name |
ICOM Incorporated
|
||||
1 2 | FCC Registration Number (FRN) |
0005855366
|
||||
1 2 | Physical Address |
1-1-32 Kamiminami
|
||||
1 2 |
Osaka, N/A 547-0003
|
|||||
1 2 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
v******@ultratech-labs.com
|
||||
1 2 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
AFJ
|
||||
1 2 | Equipment Product Code |
292600
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
A******** T********
|
||||
1 2 | Title |
General Manager
|
||||
1 2 | Telephone Number |
+8166********
|
||||
1 2 | Fax Number |
+8166********
|
||||
1 2 |
w******@icom.co.jp
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | No | |||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | VHF-FM Transceiver | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Note 1: 16K0F3E, 11K0F3E, 11K0F7E, 11K0F7D, 4K00F1D, 4K00F1E Power listed is Conducted. This device must be restricted to work related operations in an Occupational Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Class II Permissive Change is to add new microphone accessories, Model No.: HM-168LWP, HM-158LA, HM-159LA, HM-166LA and HM-153LA. Class II Permissive Change to add a new battery pack, model BP-232H (7,4V, 2300 mAh), which is same family but longer life compared to initially certified model BP-232WP (7,4V, 2250 mAh). | ||||
1 2 | Note 1: 16K0F3E, 11K0F3E, 11K0F7E, 11K0F7D, 4K00F1D, 4K00F1E Power listed is Conducted. This device must be restricted to work related operations in an Occupational Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Class II Permissive Change is to add new microphone accessories, Model No.: HM-168LWP, HM-158LA, HM-159LA, HM-166LA and HM-153LA. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
UltraTech Engineering Labs Inc.
|
||||
1 2 | Name |
T******** L****
|
||||
1 2 | Telephone Number |
905-8********
|
||||
1 2 | Fax Number |
905-8********
|
||||
1 2 |
t******@ultratech-labs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 9 | BD EF | 136 | 174 | 5 | 2 ppm | NOTE 1 | |||||||||||||||||||||||||||||||||
1 | 2 | 9 | BD EF | 136 | 174 | 1 | 2 ppm | NOTE 1 | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 9 | BD EF | 136 | 174 | 5 | 2 ppm | NOTE 1 | |||||||||||||||||||||||||||||||||
2 | 2 | 9 | BD EF | 136 | 174 | 1 | 2 ppm | NOTE 1 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC