all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.84 MiB | / January 10 2016 | |||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | / January 10 2016 | ||||||
1 | Internal Photos | / January 10 2016 | ||||||
1 | ID Label/Location Info | |||||||
1 | Attestation Statements | |||||||
1 | Attestation Statements | |||||||
1 | Attestation Statements | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Setup Photos | |||||||
1 | Test Report |
1 | User Manual | Users Manual | 2.84 MiB | / January 10 2016 |
INSTRUCTION MANUAL VHF MARINE TRANSCEIVER iM93D iM93D EURO This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Thank you for choosing this Icom product. This product is designed and built with Icom s state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUALThis instruction manual contains important operating instructions for the IC-M93D and IC-M93D EURO. This instruction manual includes some functions which are usable only when they are preset by your dealer. Ask your dealer for details. Icom is not responsible for the destruction, damage to, or performance of any Icom or non-Icom equipment, if the malfunction is because of:
Force majeure, including, but not limited to, fires, earthquakes, storms, floods, lightning, other natural disasters, disturbances, riots, war, or radioactive contamination. The use of Icom transceivers with any equipment that is not manufactured or approved by Icom. i FEATURES z Floats on water The transceiver floats in fresh or salt water even when the supplied accessories are attached. It may sink when a third-party accessory is attached. z Floats and flashes When the transceiver detects that it has come in contact with water, the backlight starts to blink, making it easy to find the transceiver even at night or in a dark environment. z Wide screen and easy user interface The transceiver is equipped with a wide screen for easy readability and easy-to-use user interface. z Dualwatch and Tri-watch functions Convenient functions that enable you to monitor the Distress channel (Ch 16) while receiving on another channel of your choice (Dualwatch), or while receiving on another channel of your choice, and the Call channel (Tri-watch).
* May not be usable depending on the transceiver version. EXPLICIT DEFINITIONS WORD DEFINITION Personal death, serious injury or an explosion may occur. RDANGER!
RWARNING! Personal injury, fire hazard or electric shock CAUTION may occur. Equipment damage may occur. If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. NOTE IN CASE OF EMERGENCY If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16. Or, transmit your Distress call using Digital Selective Calling
(DSC) on Channel 70. USING CHANNEL 16 DISTRESS CALL PROCEDURE 1. MAYDAY MAYDAY MAYDAY. 2. THIS IS ............... (name of vessel). 3. Say your call sign or other indication of the vessel
(AND your 9 digit DSC ID, if you have one). 4. LOCATED AT ............... (your position). 5. State the nature of the distress and assistance required. Give any other information which might facilitate the rescue. 6. USING DIGITAL SELECTIVE CALLING (Ch 70) DISTRESS CALL PROCEDURE 1. While lifting up the key cover, hold down
[DISTRESS] for 3 seconds until you hear 3 short beeps and then one long beep. Wait for an acknowledgment on Channel 70 from a coast station. After the acknowledgement is received, Channel 16 is automatically selected. Hold down [PTT], then transmit the appropriate information as listed to the left. 2. 3. Key cover ii PRECAUTIONS R DANGER! NEVER short the terminals of the battery pack. Shorting may occur if the terminals touch metal objects such as a key, so be careful when placing the battery packs (or the transceiver) in bags, and so on. Carry them so that shorting cannot occur with metal objects. Shorting may damage not only the battery pack, but also the transceiver. R DANGER! NEVER operate the transceiver near unshielded electrical blasting caps or in an explosive atmosphere. R DANGER! NEVER use and charge Icom battery packs with non-Icom transceivers or non-Icom chargers. Only Icom battery packs are tested and approved for use with Icom transceivers or charged with Icom chargers. Using third-party or counterfeit battery packs or chargers may cause smoke, fire, or cause the battery to burst. R WARNING! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. The continuous high volume operation may cause a ringing in your ears. If you experience the ringing, reduce the volume level or discontinue use. CAUTION: DO NOT use harsh solvents such as Benzine or alcohol when cleaning, because they will damage the transceiver surfaces. CAUTION: DO NOT attach the battery unless the flexible antenna, battery pack and jack cover are securely attached to the transceiver. Confirm that the antenna and battery pack are dry before attaching. Exposing the inside of the transceiver to dust or water can cause serious damage to the transceiver. CAUTION: DO NOT place or leave the transceiver in direct sunlight or in places with temperatures below 20C (4F) or above +60C (+140F) for IC-M93D, and below 15C
(10C for the Australian version) or above +55C for the IC-M93D EURO. The basic operations of the transceiver are guaranteed within the specified operating temperature range. However, the Liquid Crystal Display may not operate correctly, or show an indication in the case of long hours of operation, or after being placed in extremely cold areas. CAUTION: DO NOT modify the transceiver. The specifications may change and then the transceiver may not comply with the requirements of required regulations. The transceiver warranty does not cover any problems caused by unauthorized modification. CAUTION: DO NOT operate the transceiver if it becomes hot after operating it continuously for long periods of time. This may damage the transceiver. KEEP the transceiver and microphone at least 0.9 m (3 feet) away from the vessels magnetic navigation compass. iii DO NOT push [PTT] unless you actually intend to transmit. BE CAREFUL! The IC-M93D and IC-M93D EURO meet IPX7* requirements for waterproof protection. However, once the transceiver has been dropped, waterproof protection cannot be guaranteed because of possible damage to the transceivers case or the waterproof seal.
* Only when the speaker microphone jack cover, the optional HM-165, or HM-228 is attached. Even when the transceiver power is OFF, a slight current still flows in the circuits. Remove the battery pack from the trans ceiver when not using it for a long time. Otherwise, the installed battery pack or batteries will become exhausted, and will need to be recharged or replaced. BE CAREFUL! Even if the volume level is set low, the beeps of the Float n Flash, DSC alarm and AquaQuake functions are very loud. BE SURE the transceiver power is OFF before connect ing the supplied or optional equipment. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries. RECOMMENDATION CLEAN THE TRANSCEIVER THOROUGHLY WITH FRESH WATER after exposure to saltwater, and dry it before operating. Otherwise, the transceiver's keys, switches and controllers may become unusable, due to salt crystallization, and/or the charging terminals of the battery pack may rust. NOTE: DO NOT wash the transceiver in water if there is any reason to suspect the waterproofing may not be effective. For example, in cases where the [SP MIC] jack cover is damaged, the transceiver/battery pack is cracked or broken, or has been dropped, or when the battery pack is detached from the transceiver. iv INFORMATION FOR CLASS A UNINTENTIONAL RADIATORS This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. DISPOSAL The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area. v CAUTION:
Changes or modifications to this transceiver, not expressly approved by Icom Inc., could void your authority to operate this transceiver under FCC regulations. COUNTRY CODE LIST List of Country codes (ISO 3166-1) Country Codes 1 Austria 2 Belgium 3 Bulgaria 4 Croatia 5 Czech Republic 6 Cyprus 7 Denmark 8 Estonia 9 Finland 10 France 11 Germany 12 Greece 13 Hungary 14 Iceland 15 Ireland 16 Italy 17 Latvia AT BE BG HR CZ CY DK EE FI FR DE GR HU IS IE IT LV Country 18 Liechtenstein 19 Lithuania 20 Luxembourg 21 Malta 22 Netherlands 23 Norway 24 Poland 25 Portugal 26 Romania 27 Slovakia 28 Slovenia 29 Spain 30 Sweden 31 Switzerland 32 Turkey 33 United Kingdom Codes LI LT LU MT NL NO PL PT RO SK SI ES SE CH TR GB TABLE OF CONTENTS IMPORTANT ...............................................................................................i FEATURES .................................................................................................i EXPLICIT DEFINITIONS ............................................................................i IN CASE OF EMERGENCY ...................................................................... ii PRECAUTIONS ........................................................................................ iii RECOMMENDATION ............................................................................... iv INFORMATION ..........................................................................................v DISPOSAL .................................................................................................v COUNTRY CODE LIST .............................................................................v 1. OPERATING RULES ...........................................................................1 2. SUPPLIED ACCESSORIES AND ATTACHMENTS ........................23 Supplied accessories ......................................................................2 Attachments ....................................................................................2 3. PANEL DESCRIPTION ....................................................................48 Panel description .............................................................................4 Display description ..........................................................................5 Using the software keys ..................................................................7 Software keys ..................................................................................7 4. PREPARATIONS ...........................................................................910 Entering the MMSI code ..................................................................9 Entering the ATIS ID (For Dutch and German versions) ...............10 5. PANEL DESCRIPTION ................................................................1115 Selecting a channel .......................................................................11 Adjusting the volume level ............................................................13 Adjusting the squelch level ............................................................13 Setting the Call channel ................................................................13 Receiving and transmitting ............................................................14 Lock function .................................................................................14 Monitor function .............................................................................15 AquaQuake Water Draining function .............................................15 Editing a channel name .................................................................15 6. SCAN (Except for the Dutch version) ..........................................1617 Scan types ...................................................................................16 Setting Favorite channels ..............................................................17 Starting a scan ..............................................................................17 7. DUALWATCH/TRI-WATCH (Except for the Dutch version) ...............18 Description ....................................................................................18 Operation ......................................................................................18 8. DSC OPERATION .......................................................................1944 DSC address ID ............................................................................19 Entering the position and time .......................................................21 Sending DSC calls (Distress) ........................................................22 Sending DSC calls (other) .............................................................25 Receiving DSC calls (Distress) .....................................................34 Receiving DSC calls (other) ..........................................................35 DSC Log ........................................................................................40 DSC Settings .................................................................................42 9. OTHER FUNCTIONS ..................................................................4552 MOB (Man OverBoard) .................................................................45 Waypoint .......................................................................................46 Navigation .....................................................................................48 Compass .......................................................................................50 GPS/GNSS ...................................................................................50 Information screen ........................................................................52 10. MENU SCREEN ..........................................................................5358 Using the Menu screen .................................................................53 Menu screen items ........................................................................54 Radio Settings items .....................................................................55 Configuration items .......................................................................57 11. BATTERY CHARGING ................................................................5962 Regular battery charger ................................................................61 Optional battery charger ................................................................62 12. OPTIONAL SPEAKER MICROPHONE ............................................63 About the HM-165 .........................................................................63 Attaching the HM-165 ...................................................................63 13. TROUBLESHOOTING ......................................................................64 14. SPECIFICATIONS AND OPTIONS .............................................6567 Specifications ................................................................................65 Options ..........................................................................................67 15. CHANNEL LIST ...........................................................................6870 16. SAFETY TRAINING INFORMATION ................................................71 INDEX ......................................................................................................72 vi 1 OPERATING RULES D Priorities Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy. Safety and distress calls take priority over all others. You must monitor Channel 16 when you are not operating on another channel. False or fraudulent distress calls are prohibited under law. D Privacy Information overheard but not intended for you cannot lawfully be used in any way. Indecent or profane language is prohibited. D Radio licenses
(1) SHIP STATION LICENSE You must have a current radio station license before using the transceiver. It is unlawful to operate a ship station which is not licensed. Inquire through your dealer or the appropriate government agency for a Ship-Radiotelephone license application. This government-issued license states the call sign which is your crafts identification for radio purposes.
(2) OPERATORS LICENSE A Restricted Radiotelephone Operator Permit is the license most often held by small vessel radio operators when a radio is not required for safety purposes. The Restricted Radiotelephone Operator Permit must be posted or kept with the operator. Only a licensed radio operator may operate a transceiver. However, non-licensed individuals may talk over a transceiver if a licensed operator starts, supervises, ends the call and makes the necessary log entries. A current copy of the applicable government rules and regulations is only required to be on hand for vessels in which a radio telephone is compulsory. However, even if you are not required to have these on hand it is your responsibility to be thoroughly acquainted with all pertinent rules and regulations. NOTE: Even though the transceiver is capable of operation on VHF marine channels 3, 21, 23, 61, 64, 81, 82 and 83, according to FCC regulations these simplex channels cannot be lawfully used by the general population in USA waters. 1 SUPPLIED ACCESSORIES AND ATTACHMENTS 2 Supplied accessories Handstrap Battery pack Battery charger
(with 2 screws) Power adapter*
D Battery pack 1. Attach the battery pack to the transceiver. Battery pack Cigarette lighter cable*
Antenna Belt clip 2. Lock the battery pack with the latch.
* May not be supplied, or different type may be supplied, depending on the transceiver version. Attachments D Flexible antenna Connect the supplied antenna to the antenna connector. CAUTION:
NEVER carry the transceiver by holding the antenna. Transmitting without an antenna may damage the transceiver. Latch CAUTION: NEVER remove or attach the battery pack when the transceiver is wet or soiled. This may result in water or dust getting into the transceiver and battery pack, and may result in them being damaged. BE CAREFUL! The latch is tightly locked, so use caution when releasing it. DO NOT use your fingernail. Use the edge of a coin or screwdriver tip to carefully release it. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2 2 SUPPLIED ACCESSORIES AND ATTACHMENTS Attachments (Continued) D Handstrap Pass the handstrap through the loop on the back side of the transceiver to make it easy to carry. D Belt clip Attach or detach the belt clip to/from the transceiver as shown below. To attach the belt clip To detach the belt clip Lift the tab up q and slide the belt clip in the direction of the arrow w. Belt clip BE CAREFUL!
Do not break your fingernail. q w 3 Panel description
!1
!0 Microphone Display o i u y t q w e r Speaker Distress key (p. 25) q PTT SWITCH [PTT]
Hold down to transmit, release to receive. w MENU KEY Push to display or close the Menu screen. PANEL DESCRIPTION 3 e UP/DOWN/LEFT/RIGHT KEYS []/[]/[]/[]
z Push [] or [] to select the operating channel, Menu items, Menu settings, and so on. z Push [] or [] to slide through the key functions that are assigned to the software keys. (p. 7) z Push to select the desired character or number in the entry mode. (p. 9, 10, 15, 19, 21) r VOLUME/SQUELCH KEY [VOL/SQL] (p. 13) z Push once to display the volume level setting screen. z Push twice to display the squelch level setting screen. z Hold down for 1 second to turn ON the Monitor function. (p. 15)
]
t POWER KEY [
Hold down for 1 second to turn the transceiver ON or OFF. y CHANNEL 16 KEY [16/C]
z Push to select Channel 16. (p. 11) z Hold down for 1 second to select the Call channel. (p. 11) u ENTER KEY Push to set the entered data, selected item, and so on. i CLEAR/LOCK KEY [CLR/
z Push to cancel the entered data, or to return to the
]
z Hold down for 1 second to turn the Key Lock function previous screen. ON or OFF. (p. 14) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4 3 PANEL DESCRIPTION Panel description (Continued)
!1
!0 o SOFTWARE KEYS Slide through the key functions by pushing []
or [], and then push either of the 3 software keys to select the function displayed at the bottom of the display. See Software keys on page 7 for details. o Display description
!5
!4
!3
!2
!1
!0 o i q w e r t y u
!0 ANTENNA CONNECTOR (p. 2) Connects the supplied antenna.
!1 SPEAKER MICROPHONE JACK (p. 63) Connects the optional external speaker microphone. NOTE: Attach the jack cover when the optional speaker microphone is not used. Otherwise, water will get into the transceiver. q MMSI CODE DISPLAY (p. 9) Displays the entered MMSI code. w STATUS ICON (p. 14) TX is displayed while transmitting. MONI is displayed while the Monitor function is activated. BUSY is displayed while receiving, or when the squelch is open. e POWER INDICATOR (p. 8) HI is displayed when high power is selected. LOW is displayed when low power is selected. 5 r STATUS ICON STBY is displayed while not receiving nor transmitting. RT (Radio Telephone mode) is displayed while receiving or transmitting a signal or when the squelch opens. (p. 13, 56) DSC is displayed while in the DSC mode. t CHANNEL NAME The channel name is displayed, if entered. (p. 15) SCAN or SCAN 16 is displayed while scanning. (p. 16) DUAL 16 or TRI 16 is displayed while using the Dualwatch or Tri-watch function. (p. 18) y POSITION/TIME INDICATOR Displays the current position and time when valid GPS data is received, or when manually entered. Received GPS data:
?? blinks if no GPS data is received for 30 seconds after receiving valid GPS data, and then ?? and a warning message are displayed alternately after 10 minutes. A warning message is displayed if no GPS data is received for 4 hours after receiving valid GPS data. No Position No Time is displayed if no GPS data is received for 2 minutes after turning ON the transceiver, and then a warning message is displayed. L Local is displayed when the UTC Offset time is set. (p. 21) Manually entered GPS data:
A manually entered GPS data is valid for 4 hours, and then a warning message is displayed after 4 hours. L Manual is displayed. u SOFTWARE KEY FUNCTION DISPLAY (p. 7, p. 14) The software key functions are displayed. Key Locked is displayed while the Lock function is ON. PANEL DESCRIPTION 3 i CHANNEL NUMBER READOUT Displays the selected operating channel number. LA is displayed when a simplex channel is selected. o CALL CHANNEL ICON (p. 11) Displayed when a Call channel is selected.
!0 FAVORITE CHANNEL ICON (p. 17)
!1 MAIL ICON (p. 40) Displayed when a Favorite channel is selected. Displayed when there is an unread message. Blinks until one of the call messages is read.
!2 DSC SWITCH ICON (p. 42) Displayed when the CH Auto Switch is set to Ignore or Manual Blinks when the DSC Switch is OFF.
!3 BATTERY INDICATOR Displays the batterys remaining power. Indication Battery level Full Mid Charging required Battery exhausted blinks when the battery is overcharged (or over voltage)
!4 GPS ICON Stays ON while valid GPS position data is received. Blinks while no position data is received.
!5 CHANNEL GROUP ICON The selected Channel Groups icon is displayed. WX is displayed for the Weather channel in the USA, Australian, and Export versions. (p. 12) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 6 3 PANEL DESCRIPTION Using the software keys Various often-used functions are assigned to the software keys for easy access. The functions icons are displayed above the software keys, as shown below. Software keys You can assign the following functions to the software keys on the Menu screen. DSelecting a software key function 1.
Push[]or[]toslidethroughtheselectable
functions that are assigned to the software keys. Push the software key under the functions icon to select the function.
(Example: Selecting a Favorite channel) 2. Push[]
Push[]
NOTE: The displayed icons, or their order, may differ, depending on the transceiver version or the presetting. Ask your dealer for presetting details. 7
(p. 22) Distress Call Push to display the Distress Call screen to select the nature of the call, and then to make a call. NEVER MAKE A DISTRESS CALL IF YOUR SHIP OR A PERSON IS NOT IN AN EMERGENCY. A DISTRESS CALL SHOULD BE MADE ONLY WHEN IMMEDIATE HELP IS NEEDED. Other DSC Push to compose an Individual Call, Group Call, All Ships Call, or a Test Call.
(p. 25) LOG Push to display the received call log or distress message log.
(p. 40) Scan Push to start or stop a Normal or Priority scan.
(p. 16) Dualwatch/Tri-watch Push to start or stop Dualwatch or Tri-watch.
(p. 18) High/Low Push to set the power to high or low. LSome channels are set to only low power.
(p. 5) Channel/Weather channel
(p. 11~12) Push to select regular channels or Weather* channels. L is displayed except for the USA, Australian, and Export versions. L While the Call channel or Channel 16 is displayed, push this key to return to the regular channel mode.
* The Weather channels are for only the USA, Australian, and Export versions. AquaQuake Hold down to turn ON the AquaQuake function to clear water from the speaker grill.
(p. 15) Favorite channel z Push to select a Favorite channel. z Hold down for 1 second to set the displayed channel as a Favorite channel. z While a Favorite channel is displayed, hold down for 1 second to clear the Favorite channel setting.
(p. 17) Channel Name Push to edit the name of the displayed channel.
(p. 15) PANEL DESCRIPTION 3 Backlight Push to display the backlight brightness adjustment screen. LWhileintheadjustmentmode,push[]/[][]/[]to
(p. 57) adjust the brightness to between 1 and 7, or OFF. MOB z Push to display the MOB screen. z Hold down for 1 second to memorize the current position as the Man OverBoard (MOB) waypoint.
(p. 45) Waypoint z Push to display the Waypoint screen. z Hold down for 1 second to memorize the current
(p. 46) position as a Waypoint. Navigation While displaying the MOB or Waypoint screen, push this key to start navigating to the selected position.
(p. 48) Compass Push to display the Compass screen to check the vessels course heading, Speed Over Ground (SOG) and Course Over Ground (COG).
(p. 50) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 8 4 PREPARATIONS Entering the MMSI code The Maritime Mobile Service Identity (MMSI: DSC self ID) code consists of 9 digits. You can only enter the code when turning ON the transceiver for the first time. This initial code entry can be done only once. After entering, it can be changed only by your dealer or distributor. If your MMSI code has already been entered, this entry is not necessary. 4. 5. 6. 7. 1. Hold down [
] to turn ON the transceiver. Three short beeps sound, and Push [ENT] to Register your MMSI is displayed. 2. Push [ENT] to start entering the MMSI code. The MMSI Input screen is displayed. L Push [CLR] twice to skip the entry. If you skip the entry, you cannot make a DSC call. To enter the code after skipping, turn OFF the power, and then turn it ON again. 3. Enter the MMSI code. Repeat step 3 to enter all 9 digits. Push the software key below [DONE] to set the entered code. The Confirmation screen is displayed. Enter your MMSI code again to confirm. Push the software key below
[DONE] to set the entered code. L When your MMSI code is successfully entered, MMSI Successfully Registered is briefly displayed, and then the operating screen opens. L Your MMSI code is also displayed on the operating screen. TIP:
Select a number using [] and []. Push [ENT] to enter the selected number. Select or , to move the cursor. 9 NOTE: For the Dutch and German versions, entering the ATIS ID is also required. See the next page for details. Entering the ATIS ID (For Dutch and German versions) PREPARATIONS 4 The Automatic Transmitter Identification System (ATIS) ID consists of 10 digits. You can enter the ID in the ATIS ID Input item on the Menu screen. This ID entering can be done only once. After entering, it can be changed only by your dealer or distributor. If your ATIS ID has already been entered, this entry is not necessary. 6. 7. 1. 2. Push [MENU]. The Menu screen is displayed. Push [] or [] to select ATIS ID Input, and then push
[ENT] to start entering. The ATIS ID Input screen is displayed. 3. Enter your ATIS ID. TIP:
Select a number using [] and []. Push [ENT] to enter the selected number. Select or , to move the cursor. 4. Repeat step 3 to enter all 10 digits. 5. Push the software key below [DONE] to set the entered ID. The Confirmation screen is displayed. Enter your ATIS ID again to confirm. Push the software key below
[DONE] to set the entered ID. L When your ATIS ID is successfully entered, the screen displays ATIS ID Successfully Registered, and then the operating screen opens. L You can check the ATIS ID in Information on the Menu screen. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 10 5 BASIC OPERATIONS Selecting a channel NOTE: Before using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. To avoid damage to the transceiver, turn OFF the transceiver before charging. D Channel 16 Channel 16 is the distress and safety channel. It is used to establish the initial contact with a station and for emergency communications. Channel 16 is monitored during both Dualwatch and Tri-watch. While in the standby mode, you must monitor Channel 16. Push [16/C] to select Channel 16. L To return to the previously selected channel, push the software key below
[CHAN] or [CH/WX]. D Call channel Each Channel Group has separate leisure-use Call channels. The Call channel is monitored during Tri-watch. The Call channels can be selected and used to store your most often used channel in each Channel Group, for quick recall. LSee page 13 for details on setting the Call channel. Hold down [16/C] for 1 second to select the Call channel. The Call channel number and CALL are displayed. L To return to the previously selected channel, push the software key below
[CHAN] or [CH/WX]. 11 BASIC OPERATIONS 5 Version D Selecting a Channel Group Channel Groups are preset into your transceiver. You can select the Channel Group between USA, International, Canadian, DSC, and ATIS depending on the transceiver version. Preset Channel Group INT DSC Dutch German Australian USA European Export (Other) USA UK CAN ATIS 1. Push [MENU]. 2. 3. 4. The Menu screen is displayed. Push [] or [] to select Radio Settings, and then push [ENT]. The Radio Settings screen is displayed. Push [] or [] to select CHAN Group, and then push [ENT]. The CHAN Group screen is displayed. Push [] or [] to select the Channel Group, and then push
[ENT]. L Select [EXIT] to exit the Menu screen. L The selected Channel Groups icon is displayed on the operating screen. D Weather channels and Weather Alert For the USA, Australian, and Export versions, the transceiver has 10 preset Weather channels. You can use these channels to monitor broadcasts from the National Oceanographic and Atmospheric Administration (NOAA). The transceiver automatically detects a Weather alert tone on the selected weather channel, or while scanning. Selecting a Weather channel 1. Push the software key below
[CH/WX] on the software key. WX is displayed on the operating screen instead of the Channel Group icon. Push [] or [] to select a Weather channel. Setting the Weather Alert LSee page 55 for details on the Weather Alert function. 1. Push [MENU]. 2. Push [] or [] to select Radio Settings, and then push [ENT]. The Radio Settings screen is displayed. Select WX Alert, and then push
[ENT]. The WX Alert screen is displayed. 4. Select On with Scan or On. is displayed next to the weather channel icon. 2. 3. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 12 5 BASIC OPERATION Adjusting the volume level 1. Push [VOL/SQL]. 2. The volume level adjustment screen is displayed. Push [] or [] to adjust the volume level between 1 and 20, or OFF. L You can also push the software key below [MUTE] to select OFF, or below
[LOUD] to set the maximum volume level. L If no key is pushed for 5 seconds, the screen automatically closes. 3. Push [ENT] to set. Adjusting the squelch level Squelch enables the audio to be heard only while receiving a signal that is stronger than the set level. A higher level blocks weak signals, which enables you to receive only stronger signals. A lower level enables you to hear weak signals. 1. Push [VOL/SQL] twice. 2. The squelch level adjustment screen is displayed. Push [] or [] to adjust the volume level between 1 and 10, or Open. L If no key is pushed for 5 seconds, the adjustment screen automatically closes. 3. Push [ENT] to set. 13 Setting the Call channel By default, a Call channel is set in each Channel Group. You can set your most often-used channel as your Call channel in each Channel Group for a quick recall. 1. 2. 3. 4. 5. Push [MENU]. The Menu screen is displayed. Push [] or [] to select Radio Settings, and then push [ENT]. The Radio Settings screen is displayed. Push [] or [] to select Call Channel, and then push [ENT]. The Call Channel screen and the default Call channel is displayed. Push [] or [] to select the channel. Push [ENT] to set the selected channel as the Call channel. L Push the software key below
[EXIT] to return to the operating screen. Receiving and transmitting CAUTION: Transmitting without an antenna may damage the transceiver. 1. Push [] or [] to select the channel to call. L You cannot transmit on Channel 70. L Hold down [PTT] and speak into the microphone. is displayed while receiving a signal. is displayed while transmitting. 2. 3. Release [PTT] to receive. Speak into the microphone Hold down to transmit. Release to receive. Select a channel. TIP: To maximize the readability of your transmitted signal, pause for a second after pushing [PTT] and hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, and then speak at your normal voice level. BASIC OPERATION 5 NOTE:
To conserve battery power, the Power Save function automatically turns ON when no signal is received for 5 seconds. When the temperature is extremely high, the battery protection function automatically sets transceiver power to Low, and disables High power selection. Except for the Export version, the Time-out Timer function cuts OFF transmission after 5 minutes of continuously transmitting, to prevent prolonged transmission. The Noise Cancel function reduces random noise components in the transmit and/or received signal. See page 56 for details. Lock function The Lock function electronically locks all keys except for
[
], [PTT], and [DISTRESS]. This function enables you to prevent accidentally changing the channel, or accessing the functions. Hold down [CLR ] for 1 second to turn the Lock function ON or OFF. the Lock function is ON. is displayed on the bottom of the display while 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 14 5 BASIC OPERATION Monitor function The Monitor function temporarily cancels the Squelch function to check for weak signals. 1. Hold down [VOL/SQL] to turn ON the Monitor function. L The Monitor function is ON while [VOL/SQL] is held down. If there is a weak signal, you can hear the signal and noise. is displayed. 2. Release to turn OFF. TIP: You can change the Monitor function settings. See page 55 for details. AquaQuake Water Draining function Water in the speaker grill may muffle the sound coming from the speaker. The AquaQuake Water Draining function removes water from the speaker grill by vibrating the speaker. 1. Push [] or [] to select 2. Hold down the software key below function. A low frequency vibration beep sounds to drain the water, regardless of the volume level setting. L This function is activated for a maximum of 10 seconds, software key. even if you continue to hold down the to turn ON the
. 3. Release the key to turn OFF the function. NOTE: You cannot use this function when an external speaker microphone is connected. 15 Editing a channel name You can edit the name of each operating channel and weather channel, using numbers, uppercase letters, symbols, and a space. This enables easy recognition of the channels or stations. All VHF marine channels are set with default names. 1. Push [] or [] to select the channel to edit. 2. Push [] or [] to select
. L You cannot edit a channel name during Dualwatch, Tri-watch, or a Scan. 3. Push the software key below The Channel Name screen is displayed. 4. Edit the channel name. TIP:
Select [! $ ?] to enter characters, and select [ABC] to enter numbers and letters. Select characters or space using []/[]/[]/[]. Push [ENT] to enter the selected character. Select or , to move the cursor. Push the software key below to cancel editing. 5. Push the software key below [DONE]
to set the edited name. SCAN (Exept for the Dutch version) 6 Scan types You can find ongoing calls by scanning the Favorite channels. Before starting a scan, you need to:
Set the channels that you want to scan as Favorite channels. (p. 17) LOnly the Favorite channels are scanned. Set the scan type to Priority Scan or Normal Scan on the Radio Settings screen. (p. 55) Normal Scan The Normal Scan sequentially searches through all Favorite channels. However, Channel 16 is not checked unless it is set as a Favorite channel. CH 01 CH 02 WX*
CH 03 CH 05 CH 04
*For USA, Australian, and Export versions. When the Weather Alert function is ON, the previously selected Weather channel is also scanned. Priority Scan The Priority Scan sequentially searches through all Favorite channels, while also monitoring Channel 16. CH 01 CH 02 WX*
CH 16 CH 03 CH 05 CH 04
*For USA, Australian, and Export versions. When the Weather Alert function is ON, the previously selected Weather channel is also scanned. When a signal is received:
On Channel 16 The scan pauses until the signal disappears. On a channel other than Channel 16 The scan becomes Dualwatch until the signal disappears. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 16 6 SCAN (Except for the Dutch version) Setting Favorite channels You can quickly recall often-used channels by setting them as Favorite channels. You can set Favorite channels in each Channel Group. 1. Select a Channel Group. (p. 12) 2. Push [] or [] to select the channel you want to set as a Favorite channel. 3. Push [] or [] to display 4. Hold down the software key below for 1 second. The selected channel is set as a Favorite channel, and LTo cancel the setting, hold down the key again for 1 second. is displayed. Starting a scan 1. Select a Channel Group. (p. 12) 2. Push [] or [] to display
. 3. Push the software key below
. is displayed during a Priority Scan, and The scan starts. L When a signal is received, the scan pauses until the signal disappears, or resumes after 5 seconds, depending on the Scan Timer setting in Radio Settings. is displayed during a Normal Scan. L A beep sounds and 16 blinks when a signal is received on Channel 16 during a Priority scan. 4. To stop the scan, push the software key below
. TIP: You can set all channels as Favorite channels, clear all settings, or reset to the default. By default, some channels are preset as Favorite channels. The preset channels differ, depending on the transceiver version. TIP: In order to properly receive signals, be sure to adjust the squelch to a suitable level. Example: Starting a Normal Scan Push to start 17 While scanning is displayed. When a signal is received and are displayed. DUALWATCH/TRI-WATCH (Except for the Dutch version) 7 Description Dualwatch and Tri-watch are convenient to monitor Channel 16 while you are operating on another channel. Normal channel Ch 88 Ch 16 Ch 88 Normal channel Ch 9 Call channel Ch 16 5. Operation 1. Select Dualwatch or Tri-watch in Radio Settings.
(p. 55) 2. Push [] or [] to select a channel. 3. Push [] or [] to display
(Tri-watch). 4. Push the software key below the or
.
(Dualwatch) or is displayed for Dualwatch, and Dualwatch or Tri-watch starts. is displayed for Tri-watch. LBeeps sound when a signal is received on Channel 16. To cancel Dualwatch or Tri-watch, push the software key again. Monitors Channel 16 while receiving on another channel. Monitors Channel 16 and the Call channel while receiving on another channel. Dualwatch Tri-watch When a signal is received:
On Channel 16 Dualwatch/Tri-watch pauses on Channel 16 until the signal disappears. On the Call channel Tri-watch switches to Dualwatch until the signal on the Call channel disappears. Example: Operating Tri-watch on INT Channel 25. Push to start Signal is received on the Call channel. is displayed. Signal received on Channel 16 takes priority. 16 blinks. LTri-watch resumes after the signal disappears. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 DSC address ID D Entering an Individual ID You can enter a total of 75 Individual IDs, and assign names of up to 10 characters. 1. Display the Individual ID screen. 2.
[MENU] DSC Settings Individual ID No ID is displayed if no ID is entered. Push the software key below
[ADD]. The Individual IDs entry screen is displayed. 4. Push the software key below [NEXT] to start entering the name. TIP:
Select [! $ ?] to use characters, and select [ABC] to use numbers and letters. Select characters or space using []/[]/[]/[]. Push [ENT] to enter the selected character. Select or , to move the cursor. 3. Enter the Individual ID. TIP:
Select a number using [] and []. Push [ENT] to enter the selected number. Select or , to move the cursor. NOTE: the first digit is fixed as 0 for a Group ID. The first two digits are fixed as 0 for any Coast station ID. 19 5. After entering, push the software key below [DONE] to save, and return to the previous screen. The entered name is displayed. New2001DSC OPERATION8 D Entering a Group ID You can enter a total of 25 Group IDs, and assign names of up to 10 characters. 1. Display the Group ID screen. 2. 3. 4.
[MENU] DSC Settings Group ID No ID is displayed if no ID is entered. Push the software key below [ADD]. The Group IDs entry screen is displayed. Enter the Group ID and its name in the same way as described on the previous page. NOTE: The first digit is fixed as 0 for a Group ID. The first two digits are fixed as 0 for any Coast station ID. After entering, push the software key below [DONE] to save, and return to the previous screen. The entered name is displayed. D Deleting an Individual ID or Group ID
[Example: Deleting an Individual ID: ICOM #2]
1. Display the Individual ID screen.
[MENU] DSC Settings Individual ID Push [] or [] to select ICOM #2. 2. 3. Push [] to display [DEL]. 4. 5. Push the software key below [DEL]. Are you sure? is displayed. Push the software key below [OK] to delete. L Push the software key below [CANCEL] to cancel the deletion. The selected ID is deleted, and then returns to the previous screen. TIP: You can edit an ID and its name by pushing the software key below [EDIT] in step 3. 20 8DSC OPERATIONNew200112345678910111213141516 Push the software key below
[NEXT] to start entering the UTC time. L Use the TIP in step 2 to enter. Push the software key below
[DONE] to set the entered position and time. Returns to the previous screen. L The entered position and time are displayed on the operating screen. L Manual is displayed next to the time display. Entering the position and time A Distress call should include the vessels position and time. If no GPS data is received, manually enter the position and Universal Time Coordinated (UTC) time. NOTE:
The manual entry is disabled while the GPS data is received. The manually entered position and time is valid only for 4 hours, or until turning OFF the transceiver. 3. 4. 1. Display the Position Input screen.
[MENU] DSC Settings Position Input 2. Enter the latitude and longitude. TIP:
Select a number or a compass direction using []/[]/[]/[]. Push [ENT] to enter the selected number. Select or , to move the cursor. Push the software key below
[NEXT] to change the entry between latitude, longitude, and UTC. 21 8DSC OPERATIONNew2001 Sending DSC calls (Distress) A Distress call should be sent if, in the opinion of the Master, the ship or a person is in distress and requires immediate assistance. NEVER MAKE A DISTRESS CALL IF YOUR SHIP OR A PERSON IS NOT IN AN EMERGENCY. A DISTRESS CALL SHOULD BE MADE ONLY WHEN IMMEDIATE HELP IS NEEDED. 4. Push any software key to turn OFF the alarm. Channel 16 is automatically selected. D Simple call 1. Confirm that no Distress call is being received. 2. While lifting up the key cover, hold down [DISTRESS]
for 3 seconds until you hear 3 short countdown beeps and a long beep sound. The backlight blinks. After sending, wait for an Acknowledgement call. Waiting for ACK is displayed. 3. L The Distress call is automatically sent every 3.5 to 4.5 minutes, until an Acknowledgement is received, or a Distress Cancel call is sent. (p. 24) L When you receive an Acknowledgement, alarm sounds. 5. Hold down [PTT] to explain your situation. 6. Push the software key below [EXIT] to return to the operating screen. TIP: A default Distress alert contains:
Nature of distress: Undesignated distress Position information: The latest GPS, or manually input position, which is held for 4 hours or until turning OFF the transceiver. NOTE on Distress calls (Simple calls and Regular calls):
If no valid position data is received when sending a Distress call, the transceiver waits for 15 seconds until position data is received, and then the Distress call is sent. If no position is received during this 15 seconds, the position data in the transceiver memory is automatically sent. However, if there is no position data in the memory, the Distress call is sent without position data. 22 8DSC OPERATIONNew200112345678910111213141516 D Regular call Select the nature of the Distress call to include in the Regular Distress call. 4. After sending, wait for an Acknowledgement call. Waiting for ACK is displayed. 1. Push the software key below
. The Distress Call screen is displayed. Push [] or [] to select the nature of the call, and then push [ENT].
(Example: Flooding) The confirmation screen is displayed. L If no valid GPS data is being received, the latitude, longitude, and UTC entry mode is displayed. L See Entering the position and time 2. 3. on page 22 for details. While lifting up the key cover, hold down [DISTRESS] for 3 seconds until you hear 3 short countdown beeps and a long beep sound. The backlight blinks. 5. L The Distress call is automatically sent every 3.5 to 4.5 minutes, until an Acknowledgement is received, or a Distress Cancel call is sent. (p. 24) L When an Acknowledgement is received, an alarm sounds. Push any software key to turn OFF the alarm. Channel 16 is automatically selected. TIP: You can also send a Regular call by selecting the Compose Distress item on the Menu screen. 23 6. Hold down [PTT] to communicate. 8DSC OPERATIONNew2001 NOTE (For USA and Export versions):
After sending a Distress call without position data While waiting for an Acknowledgement, if valid position data is received, the transceiver will automatically send a Distress call again. Even after exiting the DSC mode, if valid position data is received within 20 minutes after receiving a Distress Acknowledgement, the transceiver will automatically send a Distress call again. D Distress call software key description While waiting for an Acknowledgement:
[CANCEL]: Cancels the Distress call and enables you to send a Cancel call. (See the right column)
[RESEND]: Enables you to resend the Distress call by
[PAUSE]:
[INFO]:
holding down [DISTRESS] again. Pauses the countdown to resend the next Distress call. Displays the information of the Distress call that you have sent. After receiving an Acknowledgement:
[EXIT]:
Closes the Distress operation, and returns to the operating screen. Displays the Distress History. Displays the information of the received Distress Acknowledgement.
[HIST]:
[INFO]:
D Distress Cancel call If you have accidently made a Distress call, or made an incorrect Distress call, send a Distress Cancel call to cancel the call as soon as possible while waiting for an Acknowledgement call, and report the purpose of the cancellation. 1. While waiting for an Acknowledgement call, push the software key below [CANCEL]. The screen below is displayed. Push the software key below [CONT]. The Distress Cancel call is sent. Channel 16 is automatically selected. 2. 3. 4. 5. Hold down [PTT] to report the purpose of the cancellation. LYou can display the wording of the cancellation by pushing []. After communicating, push the software key below
[FINISH]. The screen to the right is displayed. Push the software key below [OK] to finish the Distress Cancel call. Returns to the operating screen. 24 8DSC OPERATIONNew200112345678910111213141516 Sending DSC calls (other) NOTE: To ensure proper DSC operation, be sure to correctly adjust the CH 70 SQL Level item on the Menu screen. (p. 44) D Sending an Individual call An Individual call enables you to send a DSC signal to only a specific station. You can communicate after receiving the Acknowledgement Able to comply. 6. Push the software key below [CALL] to send the Individual call. Transmitting Individual Call is displayed, and then Waiting for ACK is displayed. L If Channel 70 is busy, the transceiver stands by until the channel becomes clear. 1. Push [] or [] to display 2. Push the software key below
. The Compose Other screen is displayed. L You can also display the Compose Other screen by selecting the Compose Other item on the Menu screen. Push [] or [] to select Individual Call, and then push [ENT]. The Individual Call screen is displayed. Select the station to send an Individual call to, and the push
[ENT]. L You can also select Manual Input to manually enter the calling station. Select a channel to assign, and then push [ENT]. L The assigned channels are preset by default. 3. 4. 5. 25 7. 8. 9. When you receive an Acknowledgement Able to comply:
An alarm sounds. The screen to the right is displayed. Push any software key to turn OFF the alarm. The channel assigned in step 5 is automatically selected. L If the called station cannot use the channel that you assigned, a different channel is selected by the station. Hold down [PTT] to communicate. 8DSC OPERATIONNew2001 Acknowledgement Unable to comply Push any software key to turn OFF the alarm. The Acknowledge information is displayed. L Push the software key below [EXIT] to return to the operating screen. D Sending an Individual Acknowledgement When you have received an Individual call (p. 35), send an Acknowledgement to the calling station. When you send an Acknowledgement, select Able to Comply, Propose New CH, or Unable to Comply. 1. 2. While an Individual call is being received, push any software key to turn OFF the alarm. Push the software key below [ACPT]. The received calls information is displayed. L If you want to send an Acknowledgement Able to comply right away, push the software key below [ABLE]. L If you cannot communicate, and want to return to the operating screen, push the software key below [IGN]. 3. Push the software key below [ACK]. The Acknowledgement category screen is displayed. Continued on the next page. 26 8DSC OPERATIONNew200112345678910111213141516 D Sending an Individual Acknowledgement (Continued) 4. Select Able to Comply, Unable to Comply, or Propose New CH. Able to Comply:
Sends an Acknowledgement call without any changes. Unable to Comply: Sends an Acknowledgement call but cannot communicate. Propose New CH: Able to communicate but proposes another channel. Specify the channel by pushing []
or []. (Example: Channel 77) 5. Push the software key below [CALL] to send the Acknowledgement call. Transmitting Individual ACK is displayed, and then the assigned channel is automatically selected. Sending on the Compose Other screen You can also send an Individual Acknowledgement by selecting Individual ACK on the Compose Other screen. This enables you to resend an Acknowledgement, or send even after sending an Unable to Comply Acknowledgement. 1. Push the software key below
. The Compose Other screen is displayed. Push [] or [] to select Individual ACK, and then push [ENT]. The Individual callers station or MMSI is displayed. L Individual ACK is not displayed if no Individual call has been received. Select the station to send an Acknowledgement call to, and the push [ENT]. 2. 3. 6. Push [PTT] to communicate. 27 4. Repeat steps 3 to 5 described on the left column. 8DSC OPERATIONNew2001 D Sending a Group call A Group call enables you to send a DSC signal to only a specific group. L You can send a Group call to a pre-entered group address, or manually enter the address before sending. (p. 20) 1. Push [] or [] to display 2. Push the software key below
. The Compose Other screen is displayed. L You can also display the Compose Other screen by selecting the Compose Other item on the Menu screen. Push [] or [] to select Group Call, and then push
[ENT]. The Group Call screen is displayed. Select the group to send a Group call to, and the push [ENT]. L You can also select Manual Input to manually enter the target group. 3. 4. 5. Select the channel to assign, and then push [ENT]. L The assigned channels are preset by default. 6. Push the software key below [CALL] to send the Group call. Transmitting Group Call is displayed, and then the assigned channel is automatically selected. L If Channel 70 is busy, the transceiver stands by until the channel becomes clear. 7. Hold down [PTT] to communicate. 28 8DSC OPERATIONNew200112345678910111213141516 D Sending an All Ships call Except for the USA and Export versions, you can send a call to all ships that carry DSC transceivers and to those that use Channel 70 as their listening channel in the range. 1. Push [] or [] to display 2. Push the software key below
. The Compose Other screen is displayed. L You can also display the Compose Other screen by selecting the Compose Other item on the Menu screen. Push [] or [] to select All Ships Call, and then push
[ENT]. The All Ships Call screen is displayed. Select the category Safety or Urgency. 6. Push the software key below [CALL] to send the All Ships call. Transmitting All Ships Call is displayed, and then the assigned channel is automatically selected. L If Channel 70 is busy, the transceiver stands by until the channel becomes clear. 7. Hold down [PTT] to communicate. 3. 4. 5. 29 Select the traffic channel to assign, and then push [ENT]. L The assigned channels are preset by default. 8DSC OPERATIONNew2001 D Sending a Test call You should avoid testing calls on the exclusive DSC distress channels and safety calling channels. When you cannot avoid testing on a distress or safety channel, you should indicate that these are test calls. Normally the test call would require no further communications between the two stations involved. 5. Push the software key below [CALL] to send the Test call. Transmitting Test Call is displayed. L If Channel 70 is busy, the transceiver stands by until the channel becomes clear. 1. Push [] or [] to display 2. Push the software key below
. 3. 4. The Compose Other screen is displayed. L You can also display the Compose Other screen by selecting the Compose Other item on the Menu screen. Push [] or [] to select Test Call, and then push
[ENT]. The Test Call screen is displayed. Select the station to send the Test call to. L You can also select Manual Input to manually enter the calling station. 6. 7. 8. 9. When you receive an Acknowledgement:
Alarm sounds. The screen to the right is displayed. Push any software key to turn OFF the alarm. The Acknowledgement information is displayed. Push the software key below
[EXIT]. Terminate the Procedure Are you sure? is displayed. Push the software key below
[OK] to return to the operating screen. 30 8DSC OPERATIONNew200112345678910111213141516 D Sending a Test Acknowledgement By default, when you receive a Test call, the Auto ACK function automatically sends an Acknowledgement to the calling station (p. 42). If the function is set to Manual, do the following steps to send an Acknowledgement. 1. 2. After a Test call is being received, push any software key to turn OFF the alarm. Push the software key below [ACPT]. The received calls information is displayed. L If you want to send an Able to comply Acknowledgement right away, push the software key below [ABLE]. 4. Push the software key below [CALL] to send the Acknowledgement. Transmitting Test ACK is displayed. 5. 6. Push the software key below
[EXIT]. A confirmation screen is displayed. Push the software key below [OK]
to return to the operating screen. 3. Push the software key below [ACK]. The Test ACK confirmation screen is displayed. 31 8DSC OPERATIONNew2001 Sending on the Compose Other screen You can also send a Test Acknowledgement by selecting Test ACK on the Compose Other screen. This enables you to resend an Acknowledgement, or send even after ignoring the call when you first received it. 1. Push the software key below
. 2. The Compose Other screen is displayed. Push [] or [] to select Test ACK, and then push
[ENT]. The Test callers station or MMSI is displayed. L Test ACK is not displayed if no Test call has been received. D Sending a Position Reply call Send a Position Reply call when a Position Request call is received. If the Auto ACK function is set to Auto, the Acknowledgement is automatically sent to the calling station. (p. 42) 1. 2. While a Position Request call is being received, push any software key to turn OFF the alarm. Push the software key below [ACPT]. The received calls information is displayed. L If you want to send an Able to Comply Acknowledgement right away, push the software key below [ABLE]. L If you cannot send a reply call, push the software key below
[UNABL]. 3. Push the software key below [ACK]. Continued on the next page. 32 8DSC OPERATIONNew200112345678910111213141516 D Sending a Position Reply call (Continued) 4. Select the reply Able to Comply. LSelect Unable to Comply if you cannot send a reply call. Push the software key below [CALL] to send the reply. Transmitting Position Reply is displayed. After sending, the replied information is displayed. 5. Sending on the Compose Other screen You can also send a Position Reply call by selecting Position Reply on the Compose Other screen. This enables you to reply even after ignoring the call when you first received it. 2. 3. 6. 7. Push the software key below [EXIT]
to return to the operating screen, or below [RESEND] to resend. A confirmation screen is displayed. Push the software key below [OK]
to return to the operating screen. 1. Push the software key below
. The Compose Other screen is displayed. Push [] or [] to select Position Reply, and then push [ENT]. The callers station or MMSI is displayed. L Position Reply is not displayed if no Position Request call has been received. Select the station to send a Position Reply call to, and the push [ENT]. TIP: If no valid position is received while selecting [ACPT]
in step 2, and selecting Able to Comply, the position and time entry screen is displayed. LSee Entering the position and time on page 22 for details. 33 4. Repeat steps 4 to 7 described in the left column. 8DSC OPERATIONNew2001 Receiving DSC calls (Distress) The transceiver receives Distress calls, Distress Acknowledgement calls, and Distress Cancel calls. L When you receive a call, an emergency alarm sounds. NOTE: The screens that are displayed when a Distress call or an Acknowledgement call is received slightly differ from one another. The following steps are described using an example of receiving a Distress call. When a Distress call is received:
The emergency alarm sounds until you turn it OFF. RCVD Distress is displayed. 1. 2. Push any software key to turn OFF the alarm. Push the software key below the intended operation.
[PAUSE]
L [PAUSE] is not displayed if the CH Auto Switch item is set to Manual. (p. 42) Pauses the countdown until the assigned channel is automatically selected. Select [RESUME] to resume the countdown. The call is saved in the DSC Log.
[ACPT]
Accepts the call. Channel 16 is automatically selected. Monitor Channel 16 as a coast station may require assistance. After Channel 16 is selected, you can select your next operation by pushing the software key below the following options.
[EXIT]: Returns to the operating screen.
[HIST]: Displays the Distress History screen.
[POS]: Displays the position of the calling L The map is not updated,even as your station on a map*. vessel moves.
[INFO]: Displays the information of the received Distress call.
[IGN]
Returns to the operating screen. The call is saved in the DSC Log. blinks continuously until you display the call message.
*Note on the map:
See Navigation screen description on page 49 for details on RNG, N-UP, BRG, and DIST. 34 8DSC OPERATIONNew200112345678910111213141516 Receiving DSC calls (other) The transceiver receives the following types of DSC calls. Individual call (p. 35) Individual Acknowledgement call (p. 25) Group call (p. 36) All Ships call (p. 37) Position Request call (p. 38) Test call (p. 39) Test Acknowledgement call (p. 40) D Receiving an Individual call When an Individual call is received:
The alarm sounds. RCVD INDV Call is displayed. 1. 2. Push any software key to turn OFF the alarm. Push the software key below the next operation.
[ABLE]
Sends an Individual Acknowledgement call right away. The assigned channel is automatically selected. After sending, [RESEND] to resend. The call is saved in the DSC Log.
[ACPT]
Accepts the call. The assigned channel is automatically selected. The call is saved in the DSC Log. The received calls information is displayed. Push the software key below [ACK] to select the Acknowledgement option. Able to Comply:
Sends an Acknowledgement call without any changes. Unable to Comply:
Sends an Acknowledgement but you cannot communicate. Propose New CH:
Sends an Acknowledgement call but on another channel. Assign the channel by pushing [] or [].
[IGN]
Ignores the call and returns to the operating screen. The call is saved in the DSC Log. blinks continuously until you display the call message. NOTE: If the Auto ACK function is set to Auto (Unable) the Acknowledgement Unable to Comply is automatically sent to the calling station when the call is received. (p. 42) L For the USA and Export versions, this function is set to Auto (Unable) by default. 35 8DSC OPERATIONNew2001 D Receiving a Group call When a Group call is received:
The alarm sounds for 2 minutes. RCVD Group Call is displayed. 1. 2. Push any software key to turn OFF the alarm. L The channel that is assigned by the caller is automatically selected after 10 seconds by default. Push the software key below your next operation.
[IGN]
Ignores the call and returns to the operating screen. The call is saved in the DSC Log. blinks continuously until you display the call message.
[PAUSE]
L [PAUSE] is not displayed if the CH Auto Switch item is set to Manual. (p. 42) Pauses the countdown until the assigned channel is automatically selected. Select [RESUME] to resume the countdown. The call is saved in the DSC Log.
[ACPT]
Accepts the call. The assigned channel is selected. The call is saved in the DSC Log.
[EXIT]
Closes the Group call, and then returns to the operating screen.
[INFO]
The received calls information is displayed. 36 8DSC OPERATIONNew200112345678910111213141516[PAUSE]
L [PAUSE] is not displayed if the CH Auto Switch item is set to Manual. (p. 42) Pauses the countdown until the assigned channel is automatically selected. Select [RESUME] to resume the countdown. The call is saved in the DSC Log.
[ACPT]
Accepts the call. The assigned channel is selected. The call is saved in the DSC Log.
[EXIT]
Closes the All Ships call, and then returns to the operating screen.
[INFO]
The received calls information is displayed. D Receiving an All Ships call When an All Ships call is received:
The alarm sounds. RCVD All Ships Call is displayed. 1. 2. Push any software key to turn OFF the alarm. L The traffic channel that is assigned by the caller is automatically selected after 10 seconds by default. Push the software key below your next operation.
[IGN]
Ignores the call and returns to the operating screen. The call is saved in the DSC Log. blinks continuously until you display the call message. 37 8DSC OPERATIONNew2001 D Receiving a Position Request call When a Position Request call is received:
The alarm sounds for 2 minutes. RCVD POS Request is displayed. 1. 2. Push any software key to turn OFF the alarm. Push the software key below the intended operation.
[ACPT]
Accepts the call. Displays the received calls information. The call is saved in the DSC Log. Push the software key below [ACK] to send the Position Reply call. (p. 33)
[ABLE]
Sends the Acknowledgement Able to Comply. The call is saved in the DSC Log.
[UNABL]
Sends the Acknowledgement Unable to Comply. Displays the Acknowledgement information, and then returns to the operating screen by pushing the software key below [EXIT]. The call is saved in the DSC Log.
[IGN]
Ignores the call and returns to the operating screen. The call is saved in the DSC Log. blinks continuously until you display the call message. NOTE:
If the Auto ACK function is set to Auto, the Position Reply is automatically sent to the calling station. (p. 42) However, even if the Auto ACK function is set to Manual, after receiving a Distress Acknowledgement, or while in the Distress Cancel call procedure, the Position Reply is automatically sent to the calling station. 38 8DSC OPERATIONNew200112345678910111213141516 D Receiving a Test call TIP: By default, the Auto ACK function automatically sends an Acknowledgement to the calling station (p. 42). If the function is set to Manual, the following screens are displayed. When a Test call is received:
The alarm sounds for 2 minutes. RCVD Test Call is displayed. 1. 2. Push any software key to turn OFF the alarm. Push the software key below your next operation.
[ABLE]
Sends the Acknowledgement Able to Comply. The call is saved in the DSC Log.
[ACPT]
Accepts the call. Displays the received calls information. The call is saved in the DSC Log. Push the software key below [ACK] to send a Test Acknowledgement call. (p. 32) Push the software key below [RESEND] to resend.
[IGN]
Ignores the call and returns to the operating screen. The call is saved in the DSC Log. blinks continuously until you display the call message. 39 NOTE: If the Auto ACK function is set to Auto, the Test Acknowledgement call is automatically sent to the calling station when the call is received. (p. 42) 8DSC OPERATIONNew2001 D Receiving a Test Acknowledgement call After sending a Test call, the called station will send you a Test Acknowledgement call. When a Test Acknowledgement call is received:
The alarm sounds for 2 minutes. Received ACK is displayed. Push any software key to turn OFF the alarm. The received calls information is displayed. The call is saved in the DSC Log. L Push the software key below [EXIT] to return to the operating screen. DSC Log D Received DSC Log The transceiver saves up to 50 received Distress call messages and 50 received Others call messages in your DSC Log. On the operating screen, unread call message. is displayed when there is an 1. Display the DSC Log screen. 2. 3.
[MENU] DSC Log Push [] or [] to select Received, and then push
[ENT]. The Received screen is displayed. Push [] or [] to select Distress or Others, and then push [ENT]. L Distress displays the received Distress call log, and Others displays the received DSC call log. TIP: You can also display the Received screen by pushing the software key below screen. on the operating Continued on the next page. 40 8DSC OPERATIONNew200112345678910111213141516 D Received DSC log (Conitnued) 4. Push [] or [] to scroll through the log. 5. Push [ENT] to display the received calls information. Received Distress log D Sent DSC Log The transceiver saves up to 50 DSC sent calls in your DSC Log. 1. Display the DSC Log screen.
[MENU] DSC Log Push [] or [] to select Transmitted, and then push
[ENT]. The Transmitted screen is displayed. Push [] or [] to scroll through the log. Push [ENT] to display the sent calls information. 2. 3. 4. Received DSC log LConfirmation screen is displayed before deleting.
[EXIT]: Returns to the operating screen.
[DEL]: Deletes the selected call log.
[POS]: Displays the position of the called station.
[MMSI]: Saves the MMSI as an Individual ID.
[WP]: Enters the received position as a Waypoint. (p. 47) LThis option is not displayed if no position data is received. 41 8DSC OPERATIONNew2001 DSC Settings On the DSC Settings screen, you can make settings on the DSC call related items. Position Input See Entering the position and time on page 21 for details. Individual ID See Entering an Individual ID on page 19 for details. Group ID See Entering a Group ID on page 20 for details. Auto ACK The Auto ACK function automatically sends an Acknowledgement call when the following calls are received. Individual call (Default: Differs depending on the version) Position Request call (Default: Manual) Test call (Default: Auto) Manual: Manually send an Acknowledgement call. Auto: Automatically send an Acknowledgement call. TIP: When Auto is set to the Individual call, the Acknowledgement Unable to Comply is automatically sent when the call is received. CH Auto Switch Select whether or not to automatically switch to channel 16 or the specified channel, or select whether to switch or ignore the call.
(Default: Accept) Accept: After receiving a DSC call, the transceiver remains on the operating channel for 10 seconds. After that, the transceiver automatically switches to the channel that is specified on the DSC call. Ignore: After receiving a DSC call, if you do not push the software key below [ACPT] in 10 seconds, the transceiver ignores the call, and then remains on the current operating channel. Manual: After receiving a DSC call, you can select whether or not to accept the received DSC call. DSC Switch Select whether or not to receive and send DSC calls. L You can send Distress calls despite of this setting.
(Default: On) On:
Off (TEMP): Does not receive or send DSC calls until you Receives and sends DSC calls. Off:
turn OFF the transceiver. Does not receive or send DSC calls. 42 8DSC OPERATIONNew200112345678910111213141516 DSC Settings (Continued) Unread Return This function puts the received DSC call on hold while receiving another call.
(Default: On) On: While receiving another call, the received DSC call is put on hold until the currently receiving call is hung up. Off: While receiving another call, the received DSC call is saved in the DSC Log. Alarm Status Set the alarm ON or OFF for each DSC related item. Safety (Default: On) An alarm sounds when a Safety DSC call is received. Routine (Default: On) An alarm sounds when a Routine DSC call is received. MOB Auto Set MOB Key (Default: On (30 sec)) For 30 seconds after entering the MOB waypoint, this function automatically sets the Nature of Distress as Man Overboard. On (30 sec): The Nature of Distress is automatically set to Man Overboard for 30 seconds after entering the MOB waypoint. The function is OFF. Off:
Warning (Default: On) An alarm sounds when:
- no MMSI code is entered.
- the position data has not been received for 2 minutes after turning ON the transceiver.
- the received position data has not been updated for 10 minutes.
- the received position data or manually entered position data has not been updated for 4 hours. Water Detection (Default: On (30 sec)) For 30 seconds after the transceiver has detected water, this function automatically sets the Nature of Distress as Man Overboard. On (30 sec): The Nature of Distress is automatically set to Man Overboard for 30 seconds after the transceiver has detected water. The function is OFF. Off:
43 Self-Terminate (Default: On) An alarm sounds when duplicate Distress calls are received. Discrete (Default: On) An alarm sounds when a lower priority call is received while receiving a high priority call. 8DSC OPERATIONNew2001 CH 70 SQL Level Adjust the Squelch level for Channel 70 to between 1 and 10, or Open. L is displayed when adjusted to Open.
(Default: 5) A higher level blocks weak signals, which enables you to send a DSC call. DST at PW Off
(Default: Valid) This function enables you to send Distress calls even while the transceiver is OFF. Valid:
You can send Distress calls by holding down
[DISTRESS], even while the transceiver is OFF. Invalid: You cannot send Distress calls while the transceiver is OFF. Loop Test This function sends DSC signals to the receiving AF circuit to compare the sending and receiving signals at the AF level. Push [ENT] to start the Loop Test. L When the sending and receiving DSC signals match, OK is displayed. NOTE: If NG is displayed, either or both the sending and receiving DSC circuits have a problem. In that case, you will have to send the transceiver to your dealer for repair. 44 8DSC OPERATIONNew200112345678910111213141516 9 OTHER FUNCTIONS MOB (Man OverBoard) You can enter a Man OverBoard (MOB) waypoint into the transceiver with its GPS position data, as soon as a person has fallen into the water and needs to be rescued. This enables you to reach the MOB position even in the dark, or when you have lost visual contact. D Entering an MOB waypoint 1. 2.
Push[]or[]todisplay
Hold down the software key below
. for 1 second to enter the MOB waypoint. After entering, Man Overboard! is displayed. L You cannot enter the MOB waypoint if no GPS data is received. L You can only enter 1 MOB waypoint, and the previously entered point is overwritten when a new waypoint is entered.
Push[ENT]tostartthenavigating
to the entered point. L See page 48 for navigation details. LPushthesoftwarekeybelow[EXIT]
to stop the navigation and return to the operating screen. 3. 45 D MOB screen 1. 2.
Push[]or[]todisplay
Push the software key below The MOB screen is displayed. L You can also display the MOB
. screen by selecting the MOB item on the Menu screen. L No Entry is displayed if no MOB 3. waypoint is entered. Push the software key below
[NAV]tostartthenavigation,
[DEL]todeletetheentry,and
[EXIT]toclosetheMOBscreen. Navigating to the MOB waypoint:
The transceiver can navigate you to the MOB waypoint. Pushthesoftwarekeybelow[NAV]. L See page 48 for navigation details. Deleting the MOB waypoint:
1.
Pushthesoftwarekeybelow[DEL]todeletetheMOB
waypoint. Are you sure? is displayed.
Pushthesoftwarekeybelow[OK]todelete. L You can cancel the deletion by pushing the software key 2. below[CANCEL]. No Entry is displayed. Waypoint Waypoints are GPS position data points of places you want to go to, the position of your own vessel, or of a vessel you received a DSC call from. You can enter up to 50 Waypoints with names of up to 10 characters. You can enter your current position information, or add one as a destination or landmarks you often go to, as information for easy access. D Entering a Waypoint Entering your current position as a Waypoint:
1. 2. for 1 second.
Push[]or[]todisplay
Hold down the software key below Waypoint was stored is displayed. The current position is entered as a Waypoint. L You cannot register a Waypoint if
. 3. no GPS data is received. Push [CLR]toreturntothe
operating screen. Manually entering a Waypoint:
1. 2. Push the software key below
Push[]or[]todisplay
. The Waypoint screen is displayed. 3. Push[]or[]todisplay[ADD]. 4. Pushthesoftwarekeybelow[ADD]. Enters the Waypoint entry mode. The current position is displayed in the entry boxes. OTHER FUNCTIONS 9 5. Edit the latitude and longitude. TIP:
Select a number or the compass directionusing[]/[]/[]/[].
Push[ENT]toentertheselected
number.
Selector,tomovethe
cursor. Push the software key below select latitude, longitude, and name. to Waypoint entry mode Entering a Waypoint name:
1. After editing the latitude and longitude, push the softwarekeybelow[NEXT]toselectName. TIP:
Select[!$?]tousecharacters,andselect[ABC]touse
numbers and letters. Selectcharactersorspaceusing[]/[]/[]/[].
Push[ENT]toentertheselectedcharacter.
Selector,tomovethecursor. 2. Push the software key below to save the edited name. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 46 9 OTHER FUNCTIONS Waypoint (Continued) D Entering a received position After receiving a Distress call that includes position data, you can enter the position as a Waypoint. This enables you to reach the callers position. 1. Push[]or[]todisplay
2. Push the software key below
. The Received screen is displayed. 3. Push[]or[]toselectDistress. 4. Select the received call and then push[ENT]. The received DSC calls GPS position data is displayed on the Information screen. 5. Push[]or[]todisplay[WP]. 6. Store Waypoint? is displayed. Push the software key below
[OK]toenter. The position is entered on the Waypoint screen. 47 D Waypoint screen 1. 2.
Push[]or[]todisplay
Push the software key below The Waypoint screen is displayed. L You can also display the Waypoint screen by selecting the Waypoint item on the Menu screen. 3.
Push[]or[]toscrollthrough
[EXIT],[SORT],[NAV],[ADD],
[EDIT],and[DEL]. Push[]or[]. Sorting the Waypoint list:
You can sort the Waypoint list by the Waypoint or MMSI name, or by the distance from your vessel.
Pushthesoftwarekeybelow[SORT]tosortthelist.
orisdisplayednexttoNameorDIST. LEach push changes the sorting order. Navigating to a Waypoint:
The transceiver can navigate you to an entered Waypoint. Pushthesoftwarekeybelow[NAV]. L See page 48 for navigation details. Adding a Waypoint:
Pushthesoftwarekeybelow[ADD]toaddaWaypoint. L Add the Waypoint in the same manner that is described in Manually entering a Waypoint on page 46. Editing a Waypoint:
While selecting the Waypoint that you want to edit, push the softwarekeybelow[EDIT]toedittheWaypoint. L Edit the Waypoint in the same manner Manually entering a Waypoint on page 46 for editing a Waypoint. Deleting a Waypoint:
1. Select the Waypoint that you want to delete, and then pushthesoftwarekeybelow[DEL]todeleteit. Are you sure? is displayed. 2. Push the software key below
[OK]todelete. LSelect[CANCEL]tocancelthe
deletion. OTHER FUNCTIONS 9 Navigation The Navigation function navigates from your current position to an entered regular Waypoint or MOB waypoint. Start navigating to the MOB waypoint:
L The MOB waypoint must be entered before navigating. 1. 2.
Push[]or[]todisplay
Push the software key below The MOB screen is displayed. 3. Push the software key below
[NAV]tostartnavigatingtothe
MOB waypoint. The navigation starts. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 48 9 OTHER FUNCTIONS Navigation (Continued) Start navigating to a Waypoint:
L A Waypoint must be entered before navigating. 1. 2.
Push[]or[]todisplay
Push the software key below The Waypoint screen is displayed.
Push[]or[]toselecta
Waypoint. After selecting, push the softwarekeybelow[NAV]tostart
navigating to the Waypoint. 3. 4. 49 D Navigation screen description Range displays the radius of a compass circle. Push[]or[]tochangetherange
between 0.125, 0.25, 0.5, 0.75, 1.5, 3, 6, and 12 nm. Displays the displays direction type. Pushthesoftwarekeybelow[SEL]to
select N-UP, AC-UP, or WP-UP. LSee page 57 for details. Thisflagiconindicatesthedirectiontoreachthe
target Waypoint or MOB waypoint. Displays the bearing of the target Waypoint or MOB waypoint from your vessel. Displays the distance to the Waypoint or MOB waypoint. Displays the Course Over Ground. Displays the Speed Over Ground. TIP: Once the navigation starts, it continues even if you close the Navigation screen by pushing the software key below[EXIT].Toproperlyfinishthenavigation,pushthe
softwarekeybelow[FINISH]. Compass The Compass shows your vessels Course Over Ground
(COG) and Speed Over Ground (SOG). 1. Push[]or[]todisplay
2. Push the software key below
. The Compass screen is displayed. Displays the displays direction type. Push the software key below
[SEL]toselectN-UPorAC-UP. LSee page 57 for details. Displays the Course Over Ground. Displays the Speed Over Ground. OTHER FUNCTIONS 9 GPS/GNSS The GPS or GNSS Status screen displays the quantity, signal power, and position of the GPS satellites in the sky view. The screen also displays the direction, elevation angle, satellite numbers, and their received signal strength. TIP: Use the transceiver outdoors so the receiver has a clear view to receive GPS signals from the satellites. D GPS/GNSS Status screen Displaying the Status screen:
1. Push[MENU]. 2. The Menu screen is displayed.
Push[]or[]toselectGPS,
andthenpush[ENT]. The GPS screen is displayed. L GNSS may be displayed, instead of GPS, depending on the transceiver version. 3.
Pushthesoftwarekeybelow[EXIT]toclosethe
Compass screen, and return to the operating screen. 3.
Push[]or[]toselectStatus
andthenpush[ENT]. The Status screen is displayed. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 50 9 OTHER FUNCTIONS D GPS/GNSSStatusscreen(Continued) Sky view description:
Image of the satellite GPS mode*
Your position Satellite A N Sky view Elevation angle 90 degree line (Zenith) Elevation angle 60 degree line E Elevation angle 30 degree line Elevation angle 0 degree line W S
* 2D is displayed while tracking 3 or less satellites. 3D is displayed while tracking more than 4 or more satellites. Satellite signal strength status description:
z Pushthesoftwarekeybelow[DISP]todisplaytheGPS/
GNSS status in the sky view or on the satellite signal strength status screen. z Pushthesoftwarekeybelow[EXIT]toreturntothe
operating screen. Satellite A 51
: Tracking satellite
: Untracking satellite Elevation angle 60 degree line Elevation angle 30 degree line Elevation angle 0 degree line Elevation angle 90 degree line (Zenith) Satellite number Satellite signal strength level LThe untracking satellite numbers blink. LPush[]or[]toscrollthroughallthesatellitenumbers. D GPS/GNSS Information screen Information screen description:
1. Push[MENU]. 2. 3. The Menu screen is displayed.
Push[]or[]toselectGPS,
andthenpush[ENT]. The GPS screen is displayed. L GNSS may be displayed, instead of GPS, depending on the transceiver version.
Push[]or[]toselect
Information and then push
[ENT]. The Information screen is displayed. L The Information screen displays your position, date, time, Speed Over Ground (SOG), and Course Over Ground (COG). OTHER FUNCTIONS 9 Information screen You can check your transceivers software version, GPS module version, and ATIS ID* on the Information screen.
* Only for the Dutch and German versions. 1. Push[MENU]. 2. The Menu screen is displayed.
Push[]or[]toselect
Information, and then push
[ENT]. The Information screen is displayed. 3. Push the software key below
[EXIT]toreturntotheoperating
screen. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 52 10 MENU SCREEN Using the Menu screen The Menu screen is used to set items, select options, and so on for the transceivers functions. D Using the Menu screen Example: Setting the channel group to INT. 1. Push [MENU]. The Menu screen is displayed. 3.
Push[]or[]toselectCHAN
Group, and then push [ENT].
TheCHANGroupscreenis
displayed. 4.
Push[]or[]toselectINT,
and then push [ENT]. INT is set and the transceiver returns to the previous screen. 2.
Push[]or[]toselectRadio
Settings, and then push [ENT].
TheRadioSettingsscreenis
displayed. LHoldingdown[]or[]sequentially
scrollsupordownthroughtheMenu
screen. 53 L To exit the Menu screen, push the softwarekeybelow[EXIT]. L To return to the previous screen, push[CLR ]. Menu screen items TheMenuscreencontainsthefollowingitems. Compose Distress Item Undesignated Fire,Explosion Flooding Collision Grounding Capsizing Compose Other Item Ref. p. 23 Sinking p. 23 Adrift p. 23 AbandoningShip p. 23 Piracy p. 23 ManOverboard p. 23 Ref. Item p. 25 AllShipsCall p. 28 TestCall Item IndividualCall GroupCall Waypoint (See pages 46 ~ 48 for details) MOB (See pages 45 for details) DSC Log Item Received GPS/GNSS Item Status Ref. p. 40 Transmitted Item Ref. p. 50 Information Item MENUSCREEN 10 Ref. p. 23 p. 23 p. 23 p. 23 p. 23 Ref. p. 29 p. 30 Ref. p. 41 Ref. p. 52 Radio Settings Item Scan Type*
Scan Timer*
Dual/Tri-watch*
CHANGroup WXAlert*
DSC Settings Item Position Input Individual ID Group ID AutoACK CHAutoSwitch DSCSwitch Configuration Item Ref. p. 55 Monitor p. 55 NoiseCancel p. 55 CallChannel p. 55 FAVSettings p. 55 RTIndicator Item Ref. p. 42 UnreadReturn p. 42 MOBAutoSet p. 42 AlarmStatus p. 42 CH70SQLLevel p. 42 DST at PW Off p. 42 LoopTest Item Item Ref. p.57 UTCOffset Backlight p.57 Inactivity Timer DisplayContrast p.57 Floatn Flash KeyBeep p.57 PowerSave KeyAssignment p.57 Direction Information (See pages 52 for details) Ref. p. 55 p. 56 p. 56 p. 56 p. 56 Ref. p. 43 p. 43 p. 43 p. 44 p. 44 p. 44 Ref. p.57 p.57 p.57 p.57
*Maynotbedisplayed,dependingonthetransceiverversion. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 54 Radio Settings items Scan Type
(Default: ) The transceiver has 2 scan types. Select Normal Scan and Priority Scan. Normal Scan: Scans all Favorite channels in the selected channel group. Priority Scan:SequentiallyscansallFavoritechannels,
whilemonitoringChannel16. L The default setting differs, depending on the transceiver version. Scan Timer
(Default: Off) You can use the Scan Timer to pause, or to resume after 5 seconds,whenasignalisdetected. On: When a signal is detected on a channel, the scan pauses for 5 seconds, and then resumes. If the signal disappears in less than 5 seconds, the scan immediately resumes. Off: When a signal is detected on a channel, the scan pauses until the signal disappears, and then resumes. Dual/Tri-watch SelectDualwatchorTri-watch.
Daulwatch: MonitorsChannel16whilereceivingon
(Default:Dualwatch) Tri-watch:
another channel.
MonitorsChannel16andtheCallchannel
whilereceivingonanotherchannel. LSee page 18 for details. 55 CHAN Group Selectthesuitablechannelgroupforyouroperatingarea.
SelectINT,USA,CAN,DSC,orATISdependingonthe
transceiver version. LSee page 12 for details.
(Default: )
(Default: Off) WX Alert FortheUSA,Australian,andExportversions,anNOAA
broadcaststationtransmitsaWeatherAlerttonebeforeany
importantweatherinformation. LWX
LWX
On with Scan: The preset Weather channels are
isdisplayedinsteadofWX.
blinksuntilyoupushakeyafterdetectinganalert. On:
Off:
sequentiallycheckedwhilescanning. The previously selected (last used) Weather channelischeckedwhilescanning. TheWeatherAlerttoneisnotdetected. Monitor
(Default: Push) Holddown[VOL/SQL]for1secondtoturnONtheMonitor
function.Thesquelchopens.
Youcanselectwhetherthesquelchcloseswhenyourelease
[VOL/SQL],orwhenyoupushanykey. Push:
Thesquelchstaysopenwhileholdingdown
[VOL/SQL]. Thesquelchstaysopenuntilyoupushanykey. Hold:
10MENU SCREEN MENUSCREEN 10
(Default: Off) Noise Cancel TheNoiseCancelfunctionreducesrandomnoise
components in the received or transmitted signal. Set the functionforbothreceivingandtransmitting. RX Off: TheNoiseCancelfunctionisOFF. 1:
Reducesrandomnoisecomponentsinthereceived
signal to approximately one half.
Reducesrandomnoisecomponentsinthereceived
signal to approximately one third.
Reducesrandomnoisecomponentsinthereceived
signal to approximately one tenth. 2:
3:
TX On: Reducesrandomnoisecomponentsinthetransmitted
signal to approximately one third. Off: TheNoiseCancelfunctionisOFF. Call Chancel YoucanchangeyourCallchannel.Thedefaultsetting
differs, depending on the transceiver version. LSee page 13 for details.
(Default: ) FAV Settings You can set all channels as Favorite channels, clear all settings, or reset to default. By default, some channels are preset. The Favorite channels differ, depending on the transceiver version. Set All Channels:
Clear All Channels:ClearsallFavoritechannels. Set default:
Sets all channels as Favorite channels.
ResetsFavoritechannelstothe
default.
(Default: On) LSeepage17fordetails. RT Indicator SelectwhetherornottodisplaytheRadioTelephone
indicator(RT)whileintheRTmode.Thisindicatesthatwhile
RTisdisplayed,youcanmakeavoicecommunication,
exceptforaDSCcall. On:
Off:
LWhenOnisselected,STBYisdisplayedwhileinthestandby
TheRTindicatorisdisplayed. TheRTindicatorisnotdisplayed. mode,andDSCisdisplayedwhileintheDSCmode. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 56 Configuration items Backlight Level
(Default: 4) Youcanadjustthebacklightbrightnessbetween1and7,or
OFF.ThebacklightautomaticallyturnsOFFafternokeyis
pushed for 5 seconds. Continue Type Youcansetthebacklightondim,evenifthebacklightis
automaticallyturnedOFF.Thisfunctionenablesyoutosee
thedisplayinthedark,evenwhenthebacklightisOFF. Off:
Dim: Thescreenstaysdimlylit,evenifthebacklightis
turnedOFFafternokeyispushedfor5seconds. The function is turned OFF.
(Default: Off) LIfyouwanttoreducethebatteryconsumption,turnthisfunction
OFF.
(Default: 4) Display Contrast Youcanadjustthedisplaycontrastlevelbetween1and8.
Oneisthelowestcontrastlevel,andeightisthehighest
contrast level. Key Beep
(Default: On) Youcanselectwhetherornottosoundabeepwhenakey
is pushed. On:
Soundsabeepwhenakeyispushed. Off: Nobeepsounds,forsilentoperation. 57 Key Assignment Softkey 1~21 Youcanchangewhichsoftwarekeyfunctionstodisplay,and
theirorder.Youcanassignupto21softwarekeysatatime. LTheusablesoftwarekeyfunctionsandtheirordermaydiffer,
depending on the transceiver version. Set default Selectthisitemtosetthesoftwarekeyfunctionorderas
default. L The default setting may differ, depending on the transceiver version. Direction YoucansetthedisplaytypefortheCompass,Navigation,
andPositionCheckscreen. Compass N-UP:
AC-UP: The compass represents the direction of your The top of the compass represents North.
(Default: N-UP) course heading. Navigation N-UP:
The top of the Navigation screen represents North. AC-UP: The top of the Navigation screen represents the
(Default: N-UP) direction of your course heading. WP-UP: The top of the Navigation screen represents the destinationwaypoint. 10MENU SCREEN Position Check N-UP:
(Default: N-UP)
ThetopofthePositionCheckscreenrepresents
North. AC-UP: ThetopofthePositionCheckscreenrepresents
the direction of your course heading.
(Default: 00:00) UTC Offset SettheoffsettimebetweenUniversalTimeCoordinated
(UTC)andyourlocaltimetobetween14:00and+14:00(in
1 minute steps). Inactivity Timer The transceiver automatically returns to the operation screen ifyoupushnokeyforthesetperiodoftimeforeachmode. Not DSC Related Thissettingisforwhenthetransceiverdisplaysascreen
thatisnotrelatedtoDSC. DSC Related Thissettingisforwhenthetransceiverdisplaysascreen
thatisrelatedtoDSC. Distress Related Thissettingisforwhenthetransceiverdisplaysascreen
that is related to a Distress call. RT Related ThissettingisforwhenthetransceiverisintheRadio
Telephone mode.
(Default: 10 min)
(Default: 15 min)
(Default: 30 sec)
(Default: Off) MENUSCREEN 10
(Default: On) Floatn Flash The Floatn Flash function detects that the transceiver has come in contact with water. When the function turns ON, the backlight starts to blink to make it easy to find the transceiver, even in the dark. Function On:
The Floatn Flash function is ON. Off: The Floatn Flash function is OFF. Auto Off Aftertakingthetransceiveroutofthewater,thebacklight
keepsblinkingforthissetperiodoftime.Setthetimeto
between0and30seconds(in10secondsteps). Cycle ThebacklightrepeatedlyturnsONorOFFinthesettime
cycle. Set the cycle to 0.5, 1, 2 or 4 seconds. Alarm
(Default: Off) Selectwhetherornottosoundanalarmwhilethebacklight
blinkswhentheFloatnFlashfunctionisturnedON. On:
Analarmsoundswhilethebacklightblinks. Off:
Noalarmsounds,evenwhentheFloatnFlash
function is set to ON.
(Default: 0.5 sec)
(Default: 20 sec) Power Save Thisfunctionconservesbatterypower.Thepowersave
functionisautomaticallyturnedONwhennosignalisreceived
for 5 seconds. TurnthePowerSavefunctionONorOFF.
(Default: On) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 58 11 BATTERY CHARGING D Battery caution Misuse of Li-ion batteries may result in the following hazards:
smoke, fire, or the battery may rupture. Misuse can also cause damage to the battery or degradation of batterys performance. R DANGER! NEVER solder the battery terminals, or NEVER modify the battery pack. This may cause heat generation, and the battery may burst, emit smoke or catch fire. R DANGER! NEVER leave battery pack in places with temperatures above +60C (+140F). High temperature buildup in the battery, such as could occur near fires or stoves, inside a sun-heated vehicle, or in direct sunlight for long periods of time may cause the battery to rupture or catch fire. Excessive temperatures may also degrade batterys performance or shorten battery life. R DANGER! NEVER strike or otherwise impact the battery. Do not use the battery if it has been severely impacted or dropped, or if the battery has been subjected to heavy pressure. Battery damage may not be visible on the outside of the case. Even if the surface of the battery does not show cracks or any other damage, the cells inside the battery may rupture or catch fire. R DANGER! NEVER expose the battery to rain, snow, seawater, or any other liquids. Do not charge or use a wet battery. If the battery gets wet, be sure to wipe it dry before using. R DANGER! NEVER place or leave battery packs near fire. Fire or heat may cause them to rupture or explode. Dispose of used battery packs in accordance with local regulations. R DANGER! NEVER use the battery with a transceiver for which it is not specified. Never use a battery with any other equipment, or for any purpose that is not specified in this instruction manual. 59 R DANGER! NEVER let fluid from inside the battery get in your eyes. If it does, blindness can result. Rinse your eyes with clean water, without rubbing them, and immediately go to a doctor. R WARNING! NEVER put the battery in a microwave oven, high-pressure container, or in an induction heating cooker. This could cause a fire, overheating, or cause the battery to rupture. R WARNING! NEVER use the battery if it emits an abnormal odor, heats up, or is discolored or deformed. If any of these conditions occur, contact your Icom dealer or distributor. R WARNING! NEVER let fluid from inside the battery come in contact with your body. It it does, immediately wash with clean water. CAUTION: DO NOT use the battery pack out of the specified temperature range. IC-M93D:
IC-M93D EURO: 15C ~ +55C 20C ~ +60C (4F ~ +140F)
(10C ~ +55C for the Australian version) 20C ~ +60C (4F ~ +140F) BP-285:
Using the battery out of its specified temperature range will reduce the batterys performance and battery life. Please note that the specified temperature range of the battery may exceed that of the transceiver. In such cases, the transceiver may not work properly because it is out of its operating temperature range. 20C ~ +50C (4F ~ +122F) (within a month) 20C ~ +40C (4F ~ +104F) (within three months) 20C ~ +20C (4F ~ +68F) (within a year) CAUTION: Shorter battery life could occur if the battery is left fully charged, completely discharged, or in an excessive temperature environment (above +50C (+122F)) for an extended period of time. If the battery pack must be left unused for a long time, it must be detached from the transceiver after discharging. You may use the battery pack until the remaining capacity is about half, then keep it safely in a cool and dry place at the following temperature range:
BE SURE to replace the battery pack with a new one approximately five years after manufacturing, even if it still holds a charge. The inside battery material will become weak after a period of time, even with little use. The estimated number of times you can charge the battery is between 300 and 500. Even when the battery appears to be fully charged, the operating time of the transceiver may become short when:
Approximately five years have passed since the battery was manufactured. The battery has been repeatedly charged. D Charging caution R DANGER! NEVER charge the battery pack in areas with extremely high temperatures, such as near fires or stoves, inside a sun-heated vehicle, or in direct sunlight. In such environments, the safety/protection circuit in the battery will activate, causing the battery to stop charging. R DANGER! NEVER charge the transceiver during a lightning storm. It may result in an electric shock, cause a fire or damage the transceiver. Always disconnect the power adapter before a storm. BATTERY CHARGING 11 R WARNING! NEVER charge or leave the battery in the battery charger beyond the specified time for charging. If the battery is not completely charged by the specified time, stop charging and remove the battery from the battery charger. Continuing to charge the battery beyond the specified time limit may cause a fire, overheating, or the battery may rupture. R WARNING! NEVER insert the transceiver (battery attached to the transceiver) into the charger if it is wet or soiled. This could corrode the battery charger terminals or damage the charger. The charger is not waterproof. NOTE: Charge the battery pack within the specified temperature range: +10C ~ +45C (+50F ~ +113F). Otherwise, the charging time will be longer, but the battery will not reach a full charge. While charging, at a point after the temperature goes out of the specified range, the charging will automatically stop. NOTE: Be sure the slots on the battery pack are correctly aligned with the guide tabs inside the battery charger. Guide tabs Slot 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 60 11 BATTERY CHARGING Regular battery charger D Installing the BC-220 On a desktop Supplied screws On a wall Supplied screws q e w 61 D Charging with the BC-220 and BC-123S You can charge Li-ion battery pack using the BC-220 and BC-123S. Charging time: approximately 3 hours. L You can also use the CP-25H cigarette lighter cable, or OPC-515L dc power cable instead of the BC-123S. Battery pack Turn OFF CP-25H* (for a 12 V cigarette lighter sockect) or OPC-515L (for a 12 V power source) can be used instead of the BC-123S. BC-123S*
power adapter BC-220
* A different type may be supplied, or may not be supplied, depending on the transceiver version. CAUTION: NEVER connect the OPC-515L to a power source using reverse polarity. This will damage the battery charger. White line: + / Black line: _ Optional battery charger D Rapid charging with the BC-214, BC-157S and AD-133 The optional BC-214 with the BC-157S and AD-133 simultaneously charges up to 6 Li-ion battery packs. Charging time: approximately 3 hours. L You can also use the OPC-656* dc power cable instead of the BC-157S and AD-133. Battery pack Turn OFF The charger adapters
(AD-133) are installed in each slot. The type of the charger adapter differs, depending on the version of the BC-214. NEVER transmit near the BC-214 or the power adapter while charging. BC-157S ac adapter may not be supplied, depending on the version. Status indicator
(Individual indicators) BC-214 BC-157S OPC-656*
*OPC-656 dc power cable Connect to a DC power source (12 ~ 16 V/at least 7 A) BATTERY CHARGING 11 CAUTION: NEVER reverse the polarity when connecting the power cable to a power source. This will damage the battery charger. Red line: + / Black line: _ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 62 12 OPTIONAL SPEAKER MICROPHONE About the HM-165 Alligator type clip Attaches to your shirt, collar, pocket, and so on. PTT switch Push to transmit. Release to receive. Microphone Speaker Turn OFF the transceiver, when connecting the HM-165. NOTE:
NEVER immerse the connector in water. If the connector becomes wet, be sure to dry it BEFORE connecting it to the transceiver. If the audio sound becomes muffled, remove any water that may be inside the speaker grill and/or microphone hole. The microphone is near the top of the speaker microphone. To maximize the readability of your transmitted signal, hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, and then speak at your normal voice level. The DSC alarms sound from the transceiver, even while the speaker microphone is attached. 63 Attaching the HM-165 1. Turn OFF the transceiver. 2. Insert the speaker microphone into the connector, and then screw it tight, as shown below. LBe careful not to cross-thread the connection. CAUTION: Firmly attach the speaker microphone jack to prevent loss, or water immersion into the connector. Detaching:
Rotate the jack cover, and then detach. Attaching:
Attach the jack cover, and then firmly rotate it. NOTE: KEEP the jack cover attached when the speaker-
microphone is not connected. Otherwise, water will get into the transceiver, and the terminals will become rusty, or if the connector gets wet, the transceiver may not work properly. TROUBLESHOOTING 13 PROBLEM You cannot turn ON the transceiver. Little or no sound comes from the speaker. POSSIBLE CAUSE The Battery is exhausted or over discharged. The Battery pack is not correctly attached. The squelch level is set too high. The volume level is set too low. The speaker has been exposed to water. You cannot transmit Water has entered to the speaker microphone connector. Some channels are preset for low power or receive only by regulations. The battery is exhausted. The battery is overcharged. The output power is set to low. Scan does not start No beeps sound Favorite channels are not set. Key Beep is set to OFF. You cannot send DSC calls You cannot receive GPS position data MMSI (DSC self ID) code is not entered. DSC Switch is set to OFF. The built-in GPS antenna is obstructed, which interrupts the GPS signals from the satellites. SOLUTION Recharge the battery pack. Correctly attach the battery pack. Set the squelch to the threshold point. Set the volume to a suitable level. Remove the water using the AquaQuake function. Dry the speaker microphone connector. Change channels. Recharge the battery pack. Confirm that the battery voltage is correct. Push the software key below to select high power. Set the Favorite channels. Turn ON the Key Beep on the Configuration screen. Enter the MMSI (DSC self ID) code. Turn ON the DSC Switch in the Menu. Use the transceiver in a place where nothing interrupts the satellite signal. REF. p. 61 p. 2 p. 13 p. 15 p. 14 p. 61 p. 5 p. 17 p. 57 p. 9 p. 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 64 14 SPECIFICATIONS AND OPTIONS Specifications IC-M93D D General TX 156.025 ~ 157.425 MHz Frequency coverage:
RX 156.050 ~ 163.275 MHz Mode:
FM (16K0G3E), DSC (16K0G2B) Operating temperature range: 20C ~ +60C (4F ~ +140F) Current drain (approximately):
Power supply requirement:
Frequency stability:
Antenna impedance:
Dimensions (approximately):
(Projections not included) Weight (approximately):
D Transmitter Output power:
Modulation system:
Tx (5 W) 1.5 A Tx (1 W) 0.7 A RX maximum audio 0.25 A (External) 0.45 A (Internal) 7.2 V DC nominal (negative ground) 10 ppm 50 nominal 57 (W) 144.6 (H) 38.5 (D) mm 2.2 (W) 5.7 (H) 1.5 (D) inches 265 g/9.3 oz with BP-285 5 W/1 W Variable reactance frequency modulation 70 dB 68 dBc Maximum frequency deviation: 5.0 kHz Adjacent channel power:
Spurious emissions (typical):
D Receiver Sensitivity (typical):
Squelch sensitivity (threshold, typical):
0.25 V 0.25 V (12 dB SINAD) 65 Intermodulation rejection ratio: 70 dB (typical) Spurious response rejection ratio: 70 dB (typical) Adjacent channel selectivity:
70 dB (typical) Audio output power (at 10% distortion):
0.35 W typical (External) with an 8 load 0.9 W typical (Internal) with a 12 load at 1 kHz IC-M93D EURO D General Frequency coverage:
TX 156.000 ~ 161.450 MHz
(156.000 ~ 161.600 MHz for Dutch version) Rx 156.000 ~ 163.425 MHz FM (16K0G3E), DSC (16K0G2B) Mode:
Operating temperature range: 15C ~ +55C Current drain (approximately): TX (5 W) 1.5 A TX (1 W) 0.7 A RX maximum audio 0.25 A (External) 0.45 A (Internal) 7.2 V DC nominal (negative ground) 1.5 kHz 50 nominal 57 (W) 144.6 (H) 38.5 (D) mm Power supply requirement:
Frequency stability:
Antenna impedance:
Dimensions (approximately):
(Projections not included) Weight (approximately):
265 g with BP-285 D Transmitter Output power:
Modulation system:
5 W/1 W Variable reactance frequency modulation Maximum frequency deviation: 5 kHz 70 dB Adjacent channel power:
Spurious emissions:
0.25 W D Receiver Sensitivity (typical):
Squelch sensitivity (threshold, typical):
6 dB emf Intermodulation rejection ratio:
68 dB Spurious response rejection ratio: 70 dB Adjacent channel selectivity:
70 dB Audio output power (at 10% distortion):
IC-M93D EURO (Australian version) D General Frequency coverage:
Mode:
Operating temperature range:
Current drain (approximately):
0.2 W (External) with an 8 load 0.9 W typical (Internal) with a 12 load at 1 kHz TX 156.025 ~ 157.425 MHz RX 156.300 ~ 162.025 MHz FM (16K0G3E), DSC (16K0G2B) 10C ~ +55C TX (5 W) 1.5 A TX (1 W) 0.7 A RX maximum audio 0.25 A (External) 0.45 A (Internal) SPECIFICATIONS AND OPTIONS 14 Power supply requirement:
Frequency stability:
Antenna impedance:
Dimensions (approximately):
(Projections not included) Weight (approximately):
7.2 V DC nominal (negative ground) 10 ppm (10C ~ +55C) 50 nominal 57 (W) 144.6 (H) 38.5 (D) mm 265 g/9.3 oz with BP-285 Maximum frequency deviation: 5.0 kHz Adjacent channel power:
Spurious emissions (typical):
70 dB 0.25 W D Receiver Sensitivity (typical):
Squelch sensitivity (threshold, typical):
6 dB emf 65 dB Intermodulation rejection ratio:
Spurious response rejection ratio: 65 dB Adjacent channel selectivity:
65 dB Audio output power (at 10% distortion):
6 dB emf (20 dB SINAD) 0.2 W (External) with an 8 load 0.9 W typical (Internal) with a 12 load at 1 kHz 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 66 6 dB emf at 20 dB SINAD D Transmitter Output power:
Modulation system:
5 W/1 W Variable reactance frequency modulation 14 SPECIFICATIONS AND OPTIONS Options D Battery pack BP-285 Li-ion battery pack Battery pack Voltage Capacity Battery life*
BP-285 7.2 V 1485 mAh (minimum) 1570 mAh (typical) 9 hours
* The operating periods are calculated under the following conditions; TX : RX : Standby = 5 : 5 : 90
(Power save : ON/ while valid GPS position data is received) D Chargers BC-220 rapid charger + BC-123S ac adapter For rapid charging of battery pack.
(Charging time: approximately 3 hours) BC-214 rapid charger + AD-133 charger adapter (6 pcs.)
+ BC-157S ac adapter For rapid charging of 6 battery packs.
(Charging time: approximately 3 hours) D DC cables opc-515l/opc-656 dc power cable For charging of the battery packs using a 12 V DC power source instead of the AC adapter.
(OPC-515L for BC-220 : OPC-656 for BC-214) 67 D Other HM-165/HM-228 speaker microphone Full sized waterproof speaker microphone including alligator type clip to attach to your shirt or collar. FA-SC59V flexible antenna MB-133 belt clip MB-96F/MB-96FL leather belt hanger CP-25H cigarette lighter cable For charging with the BC-220 charger through a 12 V cigarette lighter socket. NOTE: The CP-25H is equipped with a 1 A fuse. If the fuse blows, repair the problem, then replace it with a new rated fuse. DO NOT use fuses with amp ratings other than the ratings written below. Fuse CP-25H: (1 A /250 V) 23 22 05 04 21A 22A 03A 01A 06 07 24 25 02 03 02 03 INT 01 INT 21 05A 06 23A 24 25 D For IC-M93D and IC-M93D EURO (Australia) Channel number Frequency (MHz) USA CAN Transmit Receive 156.050 160.650 01 156.050 156.050 156.100 160.700 156.150 160.750 156.150 156.150 156.200 160.800 04A 156.200 156.200 156.250 160.850 05A 156.250 156.250 156.300 156.300 06 156.350 160.950 07A 156.350 156.350 156.400 156.400 08 156.450 156.450 09 156.500 156.500 10 11 156.550 156.550 12 156.600 156.600 13*1 156.650 156.650 156.700 156.700 14 15*1 156.750 156.750 16 156.800 156.800 17*1 156.850 156.850 156.900 161.500 18A 156.900 156.900 156.950 161.550 19A 156.950 156.950 20*1 157.000 161.600 157.000 157.000 Channel number Frequency (MHz) CAN Transmit Receive USA 21 157.050 161.650 21A 157.050 157.050 21b Rx only 161.650 157.100 161.700 22A 157.100 157.100 157.150 161.750 23 157.150 157.150 157.200 161.800 24 25 157.250 161.850 25b Rx only 161.850 157.300 161.900 26 27 157.350 161.950 28 157.400 162.000 28b Rx only 162.000 156.025 160.625 60 156.075 160.675 61A 156.075 156.075 156.125 160.725 62A 156.125 156.125 156.175 160.775 156.175 156.175 64 156.225 160.825 64A 156.225 156.225 156.275 160.875 65A 156.275 156.275 156.325 160.925 66A*1 156.325 156.325 156.375 156.375 07A 08 09 10 11 12 13*1 14 15*1 16 17*1 08 09 10 11 12 13 14 15*1 16 17 18 65 65A 66 66A 67 66A 67*1 26 27 28 26 27 28 60 61 18A 63A 64A 65A 61A 19 64 67 62 63 20 19A 20 20A
*1 Low power only
*3 For only the USA version CHANNEL LIST 15 79 78A INT 68 69 70*4 71 72 73 74 75*1 76*1 77 78 Channel number Frequency (MHz) CAN Transmit Receive USA 68 156.425 156.425 68 156.475 156.475 69 69 70*4 156.525 156.525 70*4 71 156.575 156.575 71 156.625 156.625 72 72 73 156.675 156.675 73 74 156.725 156.725 74 75*1 156.775 156.775 75*1 76*1 156.825 156.825 76*1 77*1 156.875 156.875 77*1 156.925 161.525 78A 156.925 156.925 156.975 161.575 79A 156.975 156.975 157.025 161.625 80A 157.025 157.025 157.075 161.675 81A 157.075 157.075 157.125 161.725 82A 157.125 157.125 83 157.175 161.775 83A 157.175 157.175 83b Rx only 161.775 157.225 161.825 84 157.225 157.225 157.275 161.875 157.275 157.275 157.325 161.925 84 84A 85 85A 86 83A 79A 80A 81A 82A 83 84 85 85 86 86 80 81 82 87 87 88 88 INT Channel number Frequency (MHz) USA CAN Transmit Receive 157.325 157.325 86A 157.375 161.975 87 157.375 157.375 87A 157.425 162.025 88 157.425 157.425 88A 1019*3 156.950 156.950 1020*3 157.000 157.000 1078*3 156.925 156.925 1079*3 156.975 156.975 161.975 161.975 162.025 A1*2 A2*2 162.025 WX channel 1 2 3 4 5 6 7 8 9 10 Frequency (MHz) Receive Transmit 162.550 RX only 162.400 RX only 162.475 RX only 162.425 RX only 162.450 RX only 162.500 RX only 162.525 RX only 161.650 RX only 161.775 RX only 163.275 RX only 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 68
*2 For only the Australian version
*4 DSC operation only NOTE: Simplex channels, 3, 21, 23, 61, 64, 81, 82, and 83 CANNOT be lawfully used by the general public in USA waters. 15 CHANNEL LIST D For IC-M93D EURO International channels CH Frequency (MHz) Transmit Receive CH Frequency (MHz) Transmit Receive CH Frequency (MHz) Transmit Receive CH Frequency (MHz) Transmit Receive CH Frequency (MHz) Transmit Receive CH Frequency (MHz) Transmit Receive CH 01 156.050 160.650 11 156.550 156.550 21 157.050 161.650 61 156.075 160.675 71 156.575 156.575 81 157.075 161.675 1019*4 1020*4 02 156.100 160.700 12 156.600 156.600 22 157.100 161.700 62 156.125 160.725 72 156.625 156.625 82 157.125 161.725 1078*4 03 156.150 160.750 13 156.650 156.650 23 157.150 161.750 63 156.175 160.775 73 156.675 156.675 83 157.175 161.775 1079*4 04 156.200 160.800 14 156.700 156.700 24 157.200 161.800 64 156.225 160.825 74 156.725 156.725 84 157.225 161.825 2019*4 05 156.250 160.850 15*1 156.750 156.750 25 157.250 161.850 65 156.275 160.875 75*3 156.775 156.775 85 157.275 161.875 2020*4 06 156.300 156.300 16 156.800 156.800 26 157.300 161.900 66 156.325 160.925 76*3 156.825 156.825 86 157.325 161.925 2078*4 07 156.350 160.950 17*1 156.850 156.850 27 157.350 161.950 67 156.375 156.375 77 156.875 156.875 87 157.375 157.375 2079*4 88 157.425 157.425 156.425 156.425 78 156.925 161.525 08 156.400 156.400 18 156.900 161.500 28 157.400 162.000 68 P4*2 161.425 161.425 09 156.450 156.450 19 156.950 161.550 37A*2 157.850 157.850 156.475 156.475 79 156.975 161.575 69 10 156.500 156.500 20 157.000 161.600 60 156.025 160.625 70*5156.525 156.525 80 157.025 161.625
*1 Channels 15 and 17 may also be used for on-board communications Frequency (MHz) Transmit Receive 156.950 156.950 157.000 157.000 156.925 156.925 156.975 156.975 161.550 161.550 161.600 161.600 161.525 161.525 161.575 161.575 provided the effective radiated power does not exceed 1 W, and subject to the national regulations of the administration concerned when these channels are used in its territorial waters.
*2 UK Marina Channels: M1=37A (157.850 MHz), M2=P4 (161.425 MHz) for UK version only.
*3 The output power of channels 75 and 76 are limited to low power (1 W) only. The use of these channels should be restricted to navigation-related communications only and all precautions should be taken to avoid harmful interference to channel 16, for example by means geographical separation.
*4 For only the Dutch version
*5 DSC operation only 69 CH CH
- - -
D For IC-M93D EURO USA channels (for UK version only) Frequency (MHz) Transmit Receive 156.600 156.600 156.650 156.650 156.700 156.700 156.750 156.750 156.800 156.800 156.850 156.850 156.900 156.900 156.950 156.950 157.000 161.600 157.000 157.000 157.050 157.050 Frequency (MHz) Transmit Receive 156.050 156.050
- - -
156.150 156.150
- - -
156.250 156.250 156.300 156.300 156.350 156.350 156.400 156.400 156.450 156.450 156.500 156.500 156.550 156.550 12 13*1 14 15*1 16 17*1 18A 19A 20 20A 21A 01A
- -
03A
- -
05A 06 07A 08 09 10 11
- - -
CH 22A 23A 24 25 26 27 28 37A*2 61A
- -
63A CHANNEL LIST 15 Frequency (MHz) Transmit Receive 157.100 157.100 157.150 157.150 157.200 161.800 157.250 161.850 157.300 161.900 157.350 161.950 157.400 162.000 157.850 157.850 156.075 156.075
- - -
156.175 156.175
- - -
Frequency (MHz) Transmit Receive 156.225 156.225 156.275 156.275 156.325 156.325 156.375 156.375 156.425 156.425 156.475 156.475 156.525 156.525 156.575 156.575 156.625 156.625 156.675 156.675 156.725 156.725 CH 64A 65A 66A 67*1 68 69 70*3 71 72 73 74 Frequency (MHz) Transmit Receive 156.775 156.775 156.825 156.825 156.875 156.875 156.925 156.925 156.975 156.975 157.025 157.025 157.075 157.075 157.125 157.125 157.175 157.175 157.225 161.825 157.225 157.225 CH 75*1 76*1 77*1 78A 79A 80A 81A 82A 83A 84 84A Frequency (MHz) Transmit Receive 157.275 161.875 157.275 157.275 157.325 161.925 157.325 157.325 157.375 161.975 157.375 157.375 157.425 162.025 157.425 157.425 161.425 161.425 CH 85 85A 86 86A 87 87A 88 88A P4*2
*1 Low power only
*2 UK Marina Channels: M1=37A (157.850 MHz), M2=P4 (161.425 MHz) for UK version only.
*3 DSC operation only NOTE: Simplex channels, 3, 21, 23, 61, 64, 81, 82, and 83 CANNOT be lawfully used by the general public in USA waters. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 70 16 SAFETY TRAINING INFORMATION W ARNING Your Icom radio generates RF electromagnetic energy while transmitting. This radio is designed for and classified as for Occupational Use Only. This means it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the General Population in an uncontrolled environment. This radio has been tested and complies with the FCC and IC RF exposure limits for Occupational Use Only. In addition, your Icom radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
FCC KDB Publication 447498 D03, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields RF and Microwave. The antennas, batteries, belt clips, speaker microphone, and other accessories that are listed in OPTIONS are authorized for use with this product. Use of accessories other than those specified may result in RF exposure levels exceeding the FCC and IC requirements for wireless RF exposure.; Belt Clip (MB-133), Rechargeable Li-ion Battery Pack (BP-285). Health Canada Safety Code 6 - Limits of Human Exposure to Electromagnetic Energy in the Frequency Range from 3 kHz to 300 GHz. To ensure that your expose to RF electromagnetic energy is within the FCC and IC allowable limits for occupational use, always adhere to the following guidelines:
CAU TION DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed FCC and IC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio. DO NOT transmit for more than 50% of the total radio use time (50%
duty cycle). Transmitting more than 50% of the time can cause FCC and IC RF exposure compliance requirements to be exceeded. The radio is transmitting when the TX icon is displayed. You can cause the radio to transmit by pushing the PTT switch. ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting, and only use the Icom belt-clips listed in OPTIONS when attaching the radio to your belt, or other place, to ensure FCC and IC RF exposure compliance requirements are not exceeded. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio operates within the FCC and IC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, your Icom radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. 71 Accessories ..............................2 Alarm Status (DSC Settings) ....43 All Ships call Receiving ...........................37 Sending ..............................29 AquaQuake function ................15 ATIS ID ....................................10 Auto ACK (DSC Settings) ........42 Backlight (Configuration) ........57 Battery Charger, optional ................62 Charger, regular .................61 Indicator ...............................6 Installing/charging ..............61 Call Chancel Radio Settings ....................56 Selecting ............................11 Setting ................................13 CH 70 SQL Level
(DSC Settings) ....................44 CHAN Group (Radio Settings) ...55 Channel Favorite ..............................17 Group .................................12 List .....................................68 Name, editing .....................15 Selecting ............................11 Channel 16 ..............................11 CH Auto Switch (DSC Settings) ...42 Compass .................................50 Configuration items..................57 Direction (Configuration) ..........57 Display Contrast (Configuration) ......57 Description ...........................5 Distress call Sending ..............................22 Receiving ...........................34 Cancel call .........................24 Regular call ........................23 Simple call ..........................22 DSC Address ID .........................19 Receiving ...........................35 Sending ..............................25 Log, received .....................40 Log, sent ............................41 Settings ..............................42 Switch (DSC Settings) .........42 DST at PW Off (DSC Settings) ...44 Dual/Tri-watch (Radio Settings) ..55 Dualwatch ................................18 Favorite channels, setting ......17 FAV Settings (Radio Settings) ...56 Floatn Flash (Configuration) ....58 GPS/GNSS ............................50 Information screen .............52 Status screen .....................50 Group call Receiving ...........................36 Sending ..............................28 Group ID Deleting/Entering ...............20
(DSC Settings) ...................42 HM-165, about/attaching ........63 Inactivity Timer (Configuration) ..58 Individual Acknowledgement ..............26 Call, receiving ....................35 Call, sending ......................25 ID, deleting .........................20 ID (DSC Settings) ..............42 ID, entering ........................19 Information screen ...................52 Key Assignment
(Configuration).....................57 Key Beep (Configuration) .........57 Lock function ..........................14 Loop Test (DSC Settings) .........44 Menu Items ..................................54 Using ..................................53 MMSI code, entering .................9 MOB (Man OverBoard)............45 Auto Set .............................43 Deleting ..............................45 Entering ..............................45 Navigating ..........................45 Monitor Function .............................15
(Radio Settings) .................55 Navigation ..............................48 Noise Cancel (Radio Settings) ..56 Options ...................................67 Panel description ......................4 Position Check (Configuration) ............58 Entering ..............................21 Input (DSC Settings) ..........42 Reply call, sending .............32 Request call, receiving .......38 Power Save (Configuration) ....58 Radio Settings .........................55 Receiving (basic) .....................14 INDEX RT Indicator (Radio Settings) ....56 Scan Normal/Priority ...................16 Starting ...............................17 Timer (Radio Settings) .........55 Type (Radio Settings) ..........55 Types .................................16 Software keys ............................7 Specifications ..........................65 Squelch level ...........................13 Test Acknowledgement Receiving ...........................40 Sending ..............................31 Test call Receiving ...........................39 Sending ..............................30 Time, entering ..........................21 Transmitting (basic) .................14 Tri-watch ..................................18 Troubleshooting .......................64 Unread Return (DSC Settings) ...43 UTC Offset (Configuration) .......58 Volume level............................13 Waypoint .................................46 Adding/Deleting/Editing ......48 Entering ..............................46 Entering, received position ...47 Name, entering ..................46 Navigating ..........................47 Screen ................................47 Weather Alert/channels ....................12 Alert (Radio Settings) .........55 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 72
< Intended Country of Use >
AT FI IT PL GB RO CY DE LT SK LI HR BE FR LV PT IS TR CZ GR LU SI NO DK HU MT ES CH EE IE NL SE BG A-7316H-1EX Printed in Japan 2016 Icom Inc. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan INFORMATION FCC RECOMMENDATION POUR LES RAYONNEMENTS NON INTENTIONNELS DE CLASSE A:
Cet quipement a t test et reconnu conforme aux limites fi xes pour un appareil numrique de classe A, conformment au point 15 de la rglementation FCC. Ces limites assurent une protection raisonnable contre les interfrences nuisibles lorsque l'quipement est utilis dans un environnement commercial. Cet quipement gnre une nergie de radio frquence, utilise et rayonner et s'il n'est pas install et utilis conformment au manuel d'instruction, peut causer des interfrences nuisibles aux communications radio. Le fonctionnement de cet quipement dans une zone rsidentielle est susceptible de causer des interfrences nuisibles lorsque l'utilisateur doit corriger les interfrences ses propres frais. MISE EN GARDE:
Tout changement ou modi cation, non expressment approuv par Icom Inc., peut annuler l'autorisation de l'utilisateur utiliser cet appareil conformment la rglementation FCC. Cet appareil respecte les conditions tablies au paragraphe 15 des rgles de la FCC. Son utilisation est assujettie la condition de ne pas provoquer des interfrences nuisibles. NETTOYEZ ENTIREMENT L'METTEUR-RCEPTEUR AVEC DE L'EAU DOUCE en cas d'exposition l'eau de mer, et le scher avant de l'utiliser. Autrement, les touches de l'metteur-rcepteur, les commutateurs et les contrleurs risquent de devenir inutilisables, cause de la cristallisation du sel, et/ou les bornes de recharge du bloc batterie risquent de rouiller. REMARQUE: Si la protection tanche de l'metteurrcepteur semble dfectueuse, la nettoyer soigneusement avec un tissu mou et humide (d'eau douce), puis la scher avant de l'utiliser. L'metteur-
rcepteur risque de perdre sa protection tanche si le boitier, le capuchon du jack, ou le couvercle du connecteur est fl ou cass, ou en cas de chute de l'metteur-rcepteur. Icom, Icom Inc. et le logo Icom sont des marques dposes de Icom Incorporated (Japon) au Japon, aux tats-Unis, au Royaume-
Uni, en Allemagne, en France, en Espagne, en Russie, en Australie, en Nouvelle-Zlande, et/ou dans d'autres pays. Tous les autres produits et toutes les autres marques sont des marques dposes ou non appartenant leur titulaire respectif.
- 4 -
Icom n'est pas responsable de la destruction ou des dommages sur l'metteur-rcepteur Icom, si le dysfonctionnement est caus par:
Force majeure, sans toutefois s'y limiter, les incendies, tremblements de terre, temptes, inondations, la foudre, ou autres catastrophes naturelles, perturbations, meutes, guerre, ou contamination radioactive. L'utilisation de l'metteur-rcepteur Icom avec tout quipement non fabriqu ou approuv par Icom. PRCAUTIONS METTEUR-RCEPTEUR VHF MARINE iM93D Merci davoir choisi un produit Icom. LIRE TOUTES LES PRCAUTIONS soigneuse-
ment et intgralement avant dutiliser la radio. DFINITIONS EXPLICITES DFINITION Risque d'accident mortel, de blessures corporelles graves ou d'explosion. TERME R DANGER!
R AVERTISSEMENT! Risque de blessures corporelles, d'incendie ou de choc lectrique. MISE EN GARDE REMARQUE Risque de dgt matriel. La non prise en compte peut entraner des dsagrments. Absence de risque de blessures corpo-
relles, d'incendie ou de choc lectrique. PRCAUTIONS NE PAS modifi er la radio. Les spcifi cations peuvent changer et puis ne pas se conformer aux exigences d'un rglement correspondu. La garantie du radio ne couvre pas les problmes rsultant d'une modifi cation non autorise. ATTENTION! La radio chauffe en cas dutilisation continue sur une longue dure. ATTENTION! La radio rpond IPX7* exigences de protection tanche l'eau. Mais lorsque la radio est tomb vers le bas, tanche la protection impermable l'eau ne peuvent pas tre garantis, parce que le cas de la radio ou le joint d'tanchit peuvent tre endommags.
* Seulement lorsque le chapeau de la prise haut-parleur/
microphone, l'option HM-165 ou HM-228 est fi x. Mme lorsque lmetteur-rcepteur est mis hors tension, un courant de trs faible intensit circule dans ses circuits. Retirez la batterie de la radio quand ne pas l'utiliser pendant une longue priode. Sinon, la batterie sera dcharge, et devra tre recharge ou remplace. Assurez-vous de couper l'alimentation de la radio avant de brancher l'quipement fourni ou en option. ATTENTION! Mme si le niveau de volume est bas , les bips du Float 'n Flash, DSC alarme et fonctions AquaQuake sont trs bruyants. VEILLEZ l'metteur-rcepteur est hors tension avant de connecter l'quipement fourni ou en option. R DANGER! NE JAMAIS connecter les bornes du pack batterie en court-circuit. R DANGER! NE JAMAIS utiliser la radio prs d'amorces lectriques non blindes ni dans une atmosphre explosive. R DANGER! Utiliser et charger exclusivement les packs batteries Icom spcifi s avec les portatifs Icom ou un chargeurs Icom. Seuls les packs batterie Icom sont tests et homologus pour une utilisation avec les radios Icom ou tre chargs avec les chargeurs Icom. L'utilisation de packs batterie ou de chargeurs tiers ou de contrefaon peut tre l'origine de fumes, d'incendie ou faire clater la batterie. R AVERTISSEMENT! NE JAMAIS utiliser lappareil avec un casque ou dautres accessoires audio rgls sur un niveau sonore lev. Les spcialistes de l'audition mettent en garde contre toute utilisation prolonge niveau sonore lev. Si vous entendez une sonnerie baissez le niveau sonore ou interrompez l'utilisation. MISE EN GARDE: NE JAMAIS de nettoyer lappareil avec des produits chimiques telsque lessence ou lalcool susceptibles dendommager la surface de la radio. MISE EN GARDE: NE JAMAIS tenir lmetteur-rcepteur par lantenne pour le transport. MISE EN GARDE: vrifi er que l'antenne fl exible, batterie et cache de la prise sont solidement fi xs la radio, et que l'antenne et la batterie sont secs avant de fi xation. Si vous exposez l'intrieur de la radio la poussire ou l'eau, la radio sera remarquablement endommag. VITER dutiliser ou de laisser la radio en plein soleil ou a une temprature ambiante infrieure a 20C (4F) ou suprieure a
+60C (+140F). Les oprations de base de la radio sont garantis dans la plage de temprature de fonctionnement spcifi e. Cependant, l'cran LCD peut ne pas fonctionner correctement aprs avoir t placs dans des zones extrmement froides, ou une icne apparat lors du fonctionnement de la radio pendant une longue priode de temps.
- 1 -
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A-7316H-2US Printed in Japan 2016 Icom Inc. PRCAUTIONS (suite) DMise en garde concernant la batterie Un mauvais usage des batteries au Lithium ion peut avoir les consquences suivantes: fume, incendie ou explosion de la batterie. Il peut galement causer des dommages a une autre batterie ou dgrader les performances de la batterie. R DANGER! NE JAMAIS souder les contacts de la batterie NI modifier sa composition. Ceci peut provoquer une surchauffe de la batterie, qui risque alors d'clater, de fumer ou de prendre feu. R DANGER! NE JAMAIS utiliser ni laisser le pack batterie un emplacement o la temprature est suprieure
+60C (+140F). La monte en temprature de la batterie, comme cela peut survenir proximit de flammes ou de poles, l'intrieur d'un vhicule expos au soleil, ou en plein soleil peut dtruire ou enflammer la batterie. Les tempratures excessives peuvent galement dgrader les performances de la batterie ou rduire leur longvit. R DANGER! NE PAS marteler ni cogner la batterie dune quelconque faon. N'utilisez pas la batterie si elle a reu des impacts ou a t jete ou si elle a subi une forte pression. Les dommages subis par une batterie peuvent ne pas tre visibles de l'extrieur du botier. Mme si la surface de la batterie ne semble pas fissure ou endommage, les cellules l'intrieur de la batterie peuvent se rompre ou prendre feu. R DANGER! NE PAS exposer la batterie la pluie, la neige, leau de mer ou tout autre liquide. Ne pas charger ou utiliser une batterie humide. Si une batterie est humide, veillez l'essuyer compltement avant de l'utiliser. R DANGER! Tenir l'cart batteries au feu. Feu ou la chaleur peut provoquer une rupture ou d'exploser. Disposer de batteries utilises conformment la rglementation locale. R DANGER! Utiliser la batterie uniquement avec la radio pour lequel elle est spcifie. Ne jamais utiliser une batterie avec tout autre quipement ou pour une autre destination que celle spcifie dans le prsent manuel d'utilisation. R DANGER! Dans le cas o du liquide provenant de l'intrieur de la batterie entre dans vos yeux, vous risquez la ccit. Rincez abondamment les yeux l'eau courante, sans les frotter et consultez immdiatement un mdecin. R AVERTISSEMENT! NE JAMAIS mettre la batterie dans un four micro-ondes, un rcipient haute-pression ou dans un four induction. Ceci peut provoquer un incendie, une surchauffe ou dtriorer la batterie. R AVERTISSEMENT! Cessez immdiatement d'utiliser la batterie si elle dgage une odeur anormale, si elle surchauffe, est dcolore ou dforme. Si l'une de ces situations se produit, contactez votre revendeur ou distributeur Icom. R AVERTISSEMENT! Lavez immdiatement l'eau courante toute partie du corps qui est entre en contact avec le liquide provenant de l'intrieur de la batterie. MISE EN GARDE: Toujours utiliser la batterie dans la plage de temprature spcifie, comprise entre 20C et +60C
(4F +140F), et de la batterie elle-mme de 20C
+60C (4F +140F). Lutilisation de la batterie hors de la plage de tem prature indique, a pour effet den altrer les performances et den rduire la dure de vie. MISE EN GARDE: La longvit de la batterie peut tre courte si elle est laisse de manire prolonge pleine charge, entirement dcharge, ou dans un environnement temprature excessive (suprieure +50C (+122F)). Si la batterie ne doit pas tre utilise pendant une assez longue priode, elle doit tre enleve de la VHF une fois dcharge. Vous pouvez utiliser la batterie jusqu' ce que le tmoin de la batterie indique qu'elle est la moiti de sa capacit. Placez-la ensuite dans un endroit frais et sec dans la plage de temprature ci-aprs :
20C ~ +50C (4F ~ +122F) (priode infrieure un mois) 20C ~ +40C (4F ~ +104F) (priode infrieure trois mois) 20C ~ +20C (4F ~ +68F)
(priode infrieure une anne) VEILLEZ remplacer la batterie par une nouvelle aprs cinq ans, mme si elle maintient la charge. Les matriaux prsents l'intrieur de la batterie se dtriorent aprs un certain temps, mme en cas d'utilisation rduite. Le nombre de fois o il est possible de charger la batterie est estim entre 300 et 500 fois en fonction de l'utilisation. Mme lorsque la batterie indique qu'elle est compltement charge, le temps d'utilisation du poste peut tre rduit dans les cas suivants:
Sono passati approssimativamente cinque anni dalla data di fabbrica della batteria. La batteria stata ripetutamente caricata. DMise en garde concernant la recharge R DANGER! NE JAMAIS charger le pack batterie des endroits exposs des tempratures extrmement leves, comme proximit de flammes ou de poles, l'intrieur d'un vhicule expos au soleil, ou en plein soleil. Dans ces environnements, le circuit de scurit/protection l'intrieur de la batterie peut s'activer et interrompre la recharge de la batterie. R AVERTISSEMENT! NE JAMAIS charger l'metteur-
rcepteur durant un orage. Cela risquerait de provoquer un choc lectrique, un incendie ou d'endommager l'metteur-
rcepteur. Toujours dbrancher l'adaptateur de courant avant une tempte. R AVERTISSEMENT! NE JAMAIS charger ou laisser la batterie dans le chargeur de batterie au-del de la dure de charge indique. Si la batterie n'est pas compltement charge pendant le temps spcifi, interrompez la recharge et retirez la batterie du chargeur de batterie. La poursuite de la charge au-del de dure indique peut provoquer un incendie, une surchauffe ou lclatement de la batterie. R AVERTISSEMENT! NE JAMAIS insrer un metteur-
rcepteur humide ou poussireux (avec sa batterie) dans le chargeur. Ceci peut corroder les bornes du chargeur de la batterie ou endommager le chargeur. Le chargeur n'est pas tanche. REMARQUE: Charger la batterie l'intrieur de la plage de tempratures spcifie de +10C +45C (+50F +113F). Sinon, le temps de charge sera plus long, mais la batterie ne sera pas atteindre une charge complte. La charge s'arrte automatiquement lorsque la temprature est hors de la plage spcifie. REMARQUE: Veillez que les fentes de la batterie sont correctement alignes avec les pattes de guidage l'intrieur du chargeur de batterie. INFORMATION SUR LA FORMATION LA SCURIT Votre radio Icom produit une nergie lectromagntique de radiofrquences (RF), en mode de transmission. Cette radio est conue pour un usage professionnel seulement et classe comme tel, ce qui signifie quelle doit tre utilise uniquement dans le cadre dun travail par des personnes conscientes des dangers et des mesures visant minimiser ces dangers. Elle NEST PAS conue pour une utilisation grand public, dans un environnement non contrl. Cet appareil a t valu et jug conforme, aux limites dexposition aux RF de la FCC et dIC, pour une utilisation grand public. En outre, votre radio Icom satisfait les normes et directives qui suivent en ma-
tire de niveaux dnergie et dnergie lectromagntique de RF et dvaluation de tels niveaux en ce qui concerne lexposition humaine:
Publication 447498 D03 de la FCC KDB, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Fre-
quency Electromagnetic Fields. Norme de lAmerican National Standards Institute (ANSI): IEEE C95.1-1992 sur les niveaux de scurit compatibles avec lexposition humaine aux champs lectromagntiques de radiofrquences (3 kHz 300 GHz). Norme de lANSI: IEEE C95.3-1992 sur la mthode dvaluation recommande du champ magntique potentiellement dange-
reux des radiofrquences et des micro-ondes. Les accessoires illustrs dans OPTIONS de la feuille d'instructions sont approuvs pour une utilisation avec ce produit. Lutili-
sation daccessoires autres que ceux prciss peut entraner des niveaux dexposition aux RF suprieures aux limites tablies par la FCC et dIC en matire dexposition aux RF sans fil. Le Code de scurit 6 de Sant Canada - Les limites dexposition humaine lnergie lectromagntique dans la gamme de frquences de 3 kHz 300 GHz. Afin de vous assurer que votre exposition une nergie lectromagntique de RF se situe dans les limites permises par la FCC et dIC pour une utilisation grand public, veuillez en tout temps respecter les directives suivantes:
NE PAS faire fonctionner la radio sans quune antenne approprie y soit fixe, car ceci risque dendom-
mager la radio et causer une exposition suprieure aux limites tablies par la FCC et dIC. Lantenne ap-
proprie est celle qui est fournie avec cette radio par le fabricant ou une antenne spcialement autorise par le fabricant pour tre utilise avec cette radio. NE PAS mettre pendant plus de 50 % du temps total dutilisation de lappareil (50 % du facteur dutilisation). La notion 50%
du facteur dutilisation sapplique galement au mode VOX/PTT. mettre pendant plus de 50 % du temps total dutilisation peut causer une exposition aux RF suprieure aux limites tablies par la FCC et dIC. Lorsque l'icne TX est affich, cette radio est en train dmettre. La radio mettra si vous appuyez sur le bouton PTT. TOUJOURS tenir lantenne loigne dau moins 2,5 cm de votre corps au moment dmettre et utiliser uniquement lattache pour ceinture Icom illustre dans Options de la feuille d'instructions, lorsque vous attachez la radio votre ceinture, ou autre chose, de faon vous assurer de ne pas provoquer une exposition aux RF suprieure aux limites fixes par la FCC et dIC. Pour offrir vos interlocuteurs la meilleure qualit de transmission possible, tenez lantenne au moins 5 cm de votre bouche et lgrement de ct. Les renseignements ci-dessus fournissent lutilisateur toute linformation ncessaire sur lexposition aux RF et sur ce quil faut faire pour assurer que cette radio fonctionne en respectant les limites dexposition aux RF tablies par la FCC et dIC. Interfrence lectromagntique et compatibilit En mode de transmission, votre radio Icom produit de lnergie de RF qui peut provoquer des interfrences avec dautres appa-
reils ou systmes. Pour viter de telles interfrences, mettez la radio hors tension dans les secteurs o une signalisation lexige. NE PAS faire fonctionner lmetteur dans des secteurs sensibles au rayonnement lectromagntique tels que les hpitaux, les aronefs et les sites de dynamitage.
- 2 -
- 3 -
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-07-14 | 156.025 ~ 157.425 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-07-14
|
||||
1 | Applicant's complete, legal business name |
ICOM Incorporated
|
||||
1 | FCC Registration Number (FRN) |
0005855366
|
||||
1 | Physical Address |
1-1-32 Kamiminami
|
||||
1 |
Osaka, N/A 547-0003
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
v******@ultratech-labs.com
|
||||
1 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AFJ
|
||||
1 | Equipment Product Code |
382200
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
A**** T****
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
+8166********
|
||||
1 | Fax Number |
+8166********
|
||||
1 |
w******@icom.co.jp
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/01/2016 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | VHF Marine Transceiver | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output is at the antenna terminal of the device. SAR for body worn operation has been tested and meets the FCC RF exposure guidelines when used with the ICOM listed accessories designated for this product as shown in the filing. End users must be informed of the body worn requirements for satisfying RF exposure compliance. This transmitter may operate only with antennas as described in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. This device must be restricted to work related operations in an occupational/controlled RF exposure environment. SAR was evaluated for body worn and held-to-face operating modes. Maximum SAR values reported are: Body 0.509 W/Kg and Head 1.17 W/Kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UltraTech Engineering Labs Inc.
|
||||
1 | Name |
T******** L******
|
||||
1 | Telephone Number |
905-8********
|
||||
1 | Fax Number |
905-8********
|
||||
1 |
t******@ultratech-labs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 8 | 156.025 | 157.425 | 5 | 10 ppm | 16K0G3E | ||||||||||||||||||||||||||||||||||
1 | 2 | 8 | 156.025 | 157.425 | 1 | 10 ppm | 16K0G3E | ||||||||||||||||||||||||||||||||||
1 | 3 | 8 | 156.025 | 157.425 | 5 | 10 ppm | 16K0G2B | ||||||||||||||||||||||||||||||||||
1 | 4 | 8 | 156.025 | 157.425 | 1 | 10 ppm | 16K0G2B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC