FCC ID: AFJ418800 VHF Marine Transceiver

INSTRUCTION MANUALVHF MARINE TRANSCEIVER |M94DThis device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Thank you for choosing this Icom product. This product was designed and built with Icoms state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. Important READ ALL INSTRUCTIONS carefully and completely before using the transceiver. Explicit definitions WORD DEFINITION SAVE THIS INSTRUCTION MANUAL This instruction manual contains important operating instructions for the IC-M94D. This instruction manual includes some functions that are usable only when they are preset by your dealer. Ask your dealer for details. Features RDANGER!

RWARNING!

CAUTION NOTE Personal death, serious injury or an explosion may occur. Personal injury, fire hazard or electric shock may occur. Equipment damage may occur. If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. Dfinitions explicites TERME RDANGER !

RAVERTISSEMENT!

MISE EN GARDE REMARQUE DFINITION Risque daccident mortel, de blessures corporelles graves ou dexplosion. Risque de blessures corporelles, dincendie ou de choc lectrique. Risque de dgt matriel. Inconvnient seulement, en cas de nonrespect. Absence de risque de blessures corporelles, dincendie ou de choc lectrique. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated

(Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries. AquaQuake is a trademark of Icom Incorporated. All other products or brands are registered trademarks or trademarks of their respective holders. Icom is not responsible for the destruction, damage to, or performance of any Icom or non-Icom equipment, if the malfunction is because of:

Force majeure, including, but not limited to, fires, earthquakes, storms, floods, lightning, other natural disasters, disturbances, riots, war, or radioactive contamination. The use of Icom transceivers with any equipment that is not manufactured or approved by Icom. i In case of emergency If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16, or, transmit your Distress call using Digital Selective Calling

(DSC) on Channel 70. D USING CHANNEL 16 1. Push [16/C] to switch to Channel 16. 2. While holding down [PTT], give the appropriate information as follows:

z MAYDAY MAYDAY MAYDAY. z THIS IS

(name of vessel). z Say your call sign or other indication of the vessel

(AND your 9 digit DSC ID, if you have one). z LOCATED AT z State the nature of the distress and assistance required. z Give any other information which might facilitate the rescue.

(your position). D USING DIGITAL SELECTIVE CALLING 1. Lift up the key cover, hold down [DISTRESS] for 3 seconds until the 3 short beeps and then one long beep sound. Key cover 2. Wait for an acknowledgment from another station. 3. After the acknowledgement is received, Channel 16 is automatically selected. 4. Hold down [PTT], then transmit the appropriate information as listed above. Recommendation CLEAN THE TRANSCEIVER THOROUGHLY IN A BOWL OF FRESH WATER after exposure to saltwater, and dry it before operating. Otherwise, the transceivers keys and switches may become unusable, due to salt crystallization. NOTE: If the transceivers waterproof protection appears defective, carefully clean it with a soft, damp (fresh water) cloth, then dry it before operating. The transceiver may lose its waterproof protection if the case, jack cap, or connector cover, or battery cover is cracked or broken, or the transceiver has been dropped. Contact your Icom distributor or your dealer for advice. ii 174101518281351116391461217 NOTE: DO NOT place or leave the transceiver in direct sunlight or in areas outside of the specified temperature range:

20C (4F) ~ +60C (+140F) Keep the transceiver in a secure place to prevent use by unauthorized persons. BE CAREFUL! The transceiver meets IPX7 requirements for waterproof protection. However, once the transceiver has been dropped, waterproof protection cannot be guaranteed due to the fact that the transceiver may be cracked, or the waterproof seal damaged, and so on.

* Only when the supplied battery pack or case, antenna, and jack cover are attached. Information:

In this instruction manual, the transceiver version names are described as shown below. U.S.A.: USA Export: EXP PRECAUTIONS R DANGER! NEVER operate the transceiver near unshielded electrical blasting caps or in an explosive atmosphere. This could cause an explosion and death. R WARNING! NEVER use or charge Icom battery packs with non-Icom transceivers or non-Icom chargers. Only Icom battery packs are tested and approved for use with Icom transceivers or charged with Icom chargers. Using third-party or counterfeit battery packs or chargers may cause smoke, fire, or cause the battery to burst. R WARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. R WARNING! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. The continuous high volume operation may cause a ringing in your ears. If you experience the ringing, reduce the volume level or discontinue use. CAUTION: DO NOT short the terminals of the battery pack. Shorting may occur if the terminals touch metal objects such as a key, so be careful when placing the battery packs (or the transceiver) in bags, and so on. Carry them so that shorting cannot occur with metal objects. Shorting may damage not only the battery pack, but also the transceiver. CAUTION: DO NOT use harsh solvents such as Benzine or alcohol when cleaning. This could damage the equipment surfaces. If the surface becomes dusty or dirty, wipe it clean with a soft, dry cloth. CAUTION: DO NOT place or leave the transceiver in excessively dusty environments. This could damage the transceiver. iii MISE EN GARDE : NE PAS utiliser de dissolvants agressifs tels que du Benzne ou de lalcool lors du nettoyage, car ils endommageraient les surfaces de lmetteur-rcepteur. Si lmetteur-

rcepteur est poussireux ou sale, nettoyez-le avec un tissu doux et sec. MISE EN GARDE : NE PAS placer lmetteur-rcepteur dans des environnements excessivement poussireux. Cela pourrait endommager lmetteur-rcepteur. REMARQUE : NE PAS placer ou laisser lmetteur-rcepteur en plein soleil ou dans un environnement soumis des tempratures infrieures 20C (4F) ou suprieures +60C (+140F). Placez lmetteur-rcepteur dans un lien sr pour viter toute utilisation par des personnes non autorises. MISE EN GARDE : Cet metteur-rcepteur rpond aux exigences de la norme IPX7 en matire de protection tanche. Cependant, en cas de chute de lmetteur-rcepteur, la protection tanche ne peuvent plus tre garanties, car le boitier risque dtre fissur ou le joint dtanchit endommag, etc.

* Uniquement lorsque la batterie ou le botier, lantenne et le cache-prise sont fixs. PRCAUTIONS R DANGER ! NE JAMAIS utiliser lmetteur-rcepteur proximit de dtonateurs lectriques non blinds ou dans une atmosphre explosive. Cela pourrait causer une explosion mortelle. R AVERTISSEMENT ! Nutilisez JAMAIS et ne rechargez JAMAIS des blocsbatteries Icom avec des metteurs-rcepteurs non-Icom ou des chargeurs non-Icom. Seuls les blocsbatteries Icom sont tests et homologus pour tre utiliss avec des metteurs-rcepteurs Icom ou pour tre rechargs avec des chargeurs Icom. Lutilisation de blocsbatteries ou de chargeurs tiers ou de contrefaon peut tre lorigine de fumes, dincendie ou peut faire clater la batterie. R AVERTISSEMENT ! NE JAMAIS lmetteur-rcepteur de sorte que lantenne soit trs proche des parties exposes du corps, en particulier du visage ou des yeux, et ne les touche pas pendant la transmission. R AVERTISSEMENT ! Nutilisez JAMAIS lmetteur-rcepteur avec un casque ou dautres accessoires audio des niveaux de volume levs. Le fonctionnement continu volume lev peut provoquer une sonnerie dans vos oreilles. Si vous ressentez la sonnerie, rduisez le volume ou cessez dutiliser. MISE EN GARDE : NE PAS court-circuiter les bornes de la batterie. Un court-circuit peut se produire si les bornes touchent des objets mtalliques tels quune cl. Soyez donc prudent lorsque vous placez les batteries (ou lmetteur-rcepteur) dans des sacs, etc. Transportez-les de manire ce quil ny ait pas de court-circuit avec des objets mtalliques. Un court-circuit peut endommager non seulement la batterie, mais galement lmetteur-

rcepteur. iv 174101518281351116391461217 Safety training information W A R N I NG Your Icom radio generates RF electromagnetic energy while transmitting. This radio is designed for and classified as for Occupational Use Only. This means it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the General Population in an uncontrolled environment. This radio has been tested and complies with the FCC and IC RF exposure limits for Occupational Use Only. In addition, your Icom radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:

FCC KDB Publication 447498 D03, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. American National Standards Institute

(C95.1-2019), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 0 Hz to 300 GHz. American National Standards Institute (C95.3-

2002), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields RF and Microwave. The accessories listed on page ?? are authorized for use with this product. Use of accessories other than those specifi ed may result in RF exposure levels exceeding the FCC and IC requirements for wireless RF exposure. Health Canada Safety Code 6 - Limits of Human Exposure to Electromagnetic Energy in the Frequency Range from 3 kHz to 300 GHz. To ensure that your expose to RF electromagnetic energy is within the FCC and IC allowable limits for occupational use, always adhere to the following guidelines:

DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed FCC and IC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio. DO NOT transmit for more than 50%

of the total radio use time (50% duty cycle). Transmitting more than 50%

of the time can cause FCC and IC RF exposure compliance requirements to be exceeded. The radio is transmitting when TX is displayed on the function display. You can cause the radio to transmit by pushing the PTT switch. ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting, and only use the Icom belt-

clips listed on page ?? when attaching the radio to your belt, or other place, to ensure FCC and IC RF exposure compliance requirements are not exceeded. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio operates within the FCC and IC RF exposure limits of this radio. Electromagnetic Interference/

Compatibility During transmissions, your Icom radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are exposed as a consequence of their employment, provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. C AU TIO N v Infomation en matire de scurit AVERTISSEMENT Votre radio Icom produit une nergie lectromagntique de radiofrquences (RF), en mode de transmission. Cette radio est conue pour un usage professionnel seulement et classe comme tel, ce qui signifie quelle doit tre utilise uniquement dans le cadre dun travail par des personnes conscientes des dangers et des mesures visant minimiser ces dangers. Elle NEST PAS conue pour une utilisation grand public

, dans un environnement non contrl. Cet appareil a t valu et jug conforme, aux limites dexposition aux RF de la FCC et dIC, pour une utilisation grand public. En outre, votre radio Icom satisfait les normes et directives qui suivent en matire de niveaux dnergie et dnergie lectromagntique de RF et dvaluation de tels niveaux en ce qui concerne lexposition humaine:

Publication 447498 D03 de la FCC KDB, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. Norme de lAmerican National Standards Institute (ANSI): IEEE C95.1-2019 sur les niveaux de scurit compatibles avec lexposition humaine aux champs lectromagntiques de radiofrquences (0 Hz 300 GHz). Norme de lANSI: IEEE C95.3-2002 sur la mthode dvaluation recommande du champ magntique potentiellement dangereux des radiofrquences et des micro-ondes. Les accessoires illustrs la p. ?? sont approuvs pour une utilisation avec ce produit. Lutilisation daccessoires autres que ceux prciss peut entraner des niveaux dexposition aux RF suprieures aux limites tablies par la FCC et dIC en matire dexposition aux RF sans fil. Le Code de scurit 6 de Sant Canada -

Les limites dexposition humaine lnergie lectromagntique dans la gamme de frquences de 3 kHz 300 GHz. Afin de vous assurer que votre exposition une nergie lectromagntique de RF se situe dans les limites permises par la FCC pour une utilisation grand public, veuillez en tout temps respecter les directives suivantes :

MISE EN GARDE NE PAS faire fonctionner la radio sans quune antenne approprie y soit fixe, car ceci risque dendommager la radio et causer une exposition suprieure aux limites tablies par la FCC. Lantenne approprie est celle qui est fournie avec cette radio par le fabricant ou une antenne spcialement autorise par le fabricant pour tre utilise avec cette radio. NE PAS mettre pendant plus de 50% du temps total dutilisation de lappareil (50% du facteur dutilisation). mettre pendant plus de 50% du temps total dutilisation peut causer une exposition aux RF suprieure aux limites tablies par la FCC. La radio est en train dmettre lorsque le tmoin du TX saffiche sur lcran ACL. La radio mettra si vous appuyez sur le bouton du microphone. TOUJOURS tenir lantenne loigne dau moins 2,5 cm de votre corps au moment dmettre et utiliser uniquement lattache pour ceinture Icom illustre la p. ??, lorsque vous attachez la radio votre ceinture, ou autre chose, de faon vous assurer de ne pas provoquer une exposition aux RF suprieure aux limites fixes par la FCC. Pour offrir vos interlocuteurs la meilleure qualit de transmission possible, tenez lantenne au moins 5 cm de votre bouche et lgrement de ct. Les renseignements ci-dessus fournissent lutilisateur toute linformation ncessaire sur lexposition aux RF et sur ce quil faut faire pour assurer que cette radio fonctionne en respectant les limites dexposition aux RF tablies par la FCC. Interfrence lectromagntique et compatibilit En mode de transmission, votre radio Icom produit de lnergie de RF qui peut provoquer des interfrences avec dautres appareils ou systmes. Pour viter de telles interfrences, mettez la radio hors tension dans les secteurs o une signalisation lexige. NE PAS faire fonctionner lmetteur dans des secteurs sensibles au rayonnement lectromagntique tels que les hpitaux, les aronefs et les sites de dynamitage. Usage professionnel/contrl Ce radio metteur est utilis dans des cas o des personnes sont exposes en raison de leur travail, pourvu quelles soient conscientes du risque dexpositionet quelles puissent exercer un contrle sur cette exposition. vi 174101518281351116391461217 FCC information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION: Changes or modifications to this transceiver, not expressly approved by Icom Inc., could void your authority to operate this transceiver under FCC regulations. Information FCC Cet quipement a t test et reconnu conforme aux limites fixes pour un appareil numrique de classe A, conformment au point 15 de la rglementation FCC. Ces limites sont dfinies de faon fournir une protection raisonnable contre le brouillage prjudiciable lorsque cet appareil est utilis dans un environnement commercial. Cet quipement gnre, utilise et peut mettre un rayonnement de frquence radio. Sil na pas t install conformment aux instructions, il peut par ailleurs crer des interfrences perturbant les communications radio. Lutilisation de cet appareil dans une zone rsidentielle peut provoquer un brouillage prjudiciable, auquel cas lutilisateur sera tenu de corriger la situation ses frais. MISE EN GARDE: Tout changement ou modification, non expressment approuv par Icom Inc., peut annuler lautorisation de lutilisateur utiliser cet appareil conformment la rglementation FCC. vii Table of contents viii 174101518281351116391461217 1 OPERATING RULES D Priorities Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy. Safety and distress calls take priority over all others. You must monitor Channel 16 when you are not operating on another channel. False or fraudulent distress calls are prohibited under law. D Privacy Information overheard but not intended for you cannot lawfully be used in any way. Indecent or profane language is prohibited. D Radio licenses

(1) SHIP STATION LICENSE You must have a current radio station license before using the transceiver. It is unlawful to operate a ship station which is not licensed. Inquire through your dealer or the appropriate government agency for a Ship-

Radiotelephone license application. This government-issued license states the call sign which is your crafts identification for radio purposes.

(2) OPERATORS LICENSE A Restricted Radiotelephone Operator Permit is the license most often held by small vessel radio operators when a radio is not required for safety purposes. The Restricted Radiotelephone Operator Permit must be posted or kept with the operator. Only a licensed radio operator may operate a transceiver. However, non-licensed individuals may talk over a transceiver if a licensed operator starts, supervises, ends the call and makes the necessary log entries. A current copy of the applicable government rules and regulations is only required to be on hand for vessels in which a radio telephone is compulsory. However, even if you are not required to have these on hand it is your responsibility to be thoroughly acquainted with all pertinent rules and regulations. NOTE: Even though the IC-M94D/IC-M94DE is capable of operation on VHF marine channels 1021, 1023, 1081, 1082, and 1083, according to FCC regulations these simplex channels cannot be lawfully used by the general population in USA waters. 1 ACCESSORIES 2 Supplied accessories Antenna Handstrap Belt clip Cigarette lighter cable Battery pack Power adapter

(For Desktop charger) Desktop charger

(With 2 screws) NOTE: Some accessories may not be supplied, or the shape may be different, depending on the transceiver version. Attaching accessories D Antenna Connect the supplied antenna to the antenna connector. CAUTION:

DO NOT carry the transceiver by holding only the antenna. DO NOT connect an antenna other than those listed in this instruction manual. DO NOT transmit without an antenna. D Belt clip To attach:

Slide the belt clip in the direction of the arrow until the belt clip is locked and makes a click sound. Belt clip To detach:

Lift the tab up (1), and slide the belt clip in the direction of the arrow (2). BE CAREFUL! DO NOT break your fingernail. q q w w 2 174101518281351116391461217 2 ACCESSORIES Attaching accessories D Battery pack To insert:

1. Push the sliding lock (1). 2. Open the battery cover (1), and place the battery pack into the transceiver so it fits flat (2). 3. Securely attach the battery cover. To remove:

Push the sliding lock, and then lift the battery cover to remove it. Then remove the battery pack. CAUTION:

NEVER remove the battery cover when the transceiver is wet or soiled. This may result in water or dust getting into the transceiver/battery pack, and may result in the transceiver being damaged. When attaching or removing the battery cover, make sure the rubber seal is correctly set in the groove of the cover. If the seal is not correctly in the groove, it may be damaged when attaching the battery cover. If the seal is damaged, waterproof protection is not guaranteed. When attaching the battery cover, make sure dust or other material does not adhere to the rubber seal. If dust or other material is on the seal when attaching the battery cover, waterproof protection may not be guaranteed. Be sure that the rubber seal is correctly seated in the groove, and there is no dust or other material on it. 3 Correct position Incorrect position Rubber seal Groove Battery cover Battery cover 11 10 9 8 7 PANEL DESCRIPTION 3 Panel description 1 2 Display Call channel. (p. ??) 3 4 5 6 Speaker 4 CLEAR/LOCK KEY [CLR/

Push to cancel the entered data, or to return to the previous screen. Hold down for 1 second to turn the Key Lock function ON or OFF. (p. ??) 5 CHANNEL 16 KEY [16/C]

Push to select Channel 16. (p. ??) Hold down for 1 second to select the 6 ENTER KEY Push to set the entered data, selected item, and so on. 7 UP/DOWN/LEFT/RIGHT KEYS

Push [] or [] to select the operating channel, Menu items, Menu settings, and so on. Push [] or [] to scroll the Software key functions. (p. ?) in the entry mode. (pp. ??, ??) 8 VOLUME/SQUELCH/MONITOR KEY

[VOL/SQL]/[MONI]

Push once to display the volume level Push twice to display the squelch level setting screen. (p. ??) Hold down for 1 second to turn ON the Monitor function. (p. ??) 9 MENU KEY Push to display or close the Menu screen. 10 POWER KEY [

Hold down for 1 second to turn the transceiver ON or OFF. 11 PTT SWITCH [PTT]

Hold down to transmit, release to receive. 12 DISTRESS KEY [DISTRESS]

Hold down for 3 seconds to transmit a Distress call. Microphone Push to select a character or number 12 setting screen. (p. ??) 4 1 SPEAKER MICROPHONE JACK

(p. ??) Connects the optional external speaker microphone. NOTE: Attach the jack cover when the optional speaker microphone is not used. Otherwise, water will get into the transceiver. 2 ANTENNA CONNECTOR (p. ??) Connects the supplied antenna. 3 SOFTWARE KEYS (p. ??) Scroll the key functions by pushing

[] or [], and then push either of the 3 software keys to select the function displayed at the bottom of the display. 174101518281351116391461217 3 PANEL DESCRIPTION Display description 1 2 3 4 56 7 8 9 10 11 12 18 17 16 15 14 13 1 MMSI CODE (p. ??) Displays the entered MMSI code. 2 POWER INDICATOR (p. ??) HI:

Displayed when high power is selected. LOW: Displayed when low power is selected. 3 CHANNEL GROUP INDICATOR Displays the selected channel group, INT (International), USA, CAN

(Canada), WX (Weather channel). L The selectable channels may differ, depending on the version or presetting. L When the WX Alert is set to ON, is displayed. 4 GPS ICON Displayed when valid GPS position data is received. Blinks while no position data is received. 5 MAIL ICON (p. ??) Displayed when there is an unread DSC message. Blinks until one of the called messages is read. 6 CPA/TCPA ICON Displayed when there is a target in the CPA/TCPA alarm area. (p. ??) 7 BATTERY INDICATOR Displays the batterys remaining power. Indication Battery level Full Mid Charging required Battery exhausted L blinks when the battery is overcharged (or over voltage). 8 DSC SWITCH ICON (p. ??) Displayed when the CH Auto Switch is set to Ignore or Manual Blinks when the DSC Switch is OFF. 9 LOUD/MUTE INDICATOR (p. ??) Displays when the audio volume level is set to Loud. Displays when the audio volume level is set to Mute. 10 FAVORITE CHANNEL ICON (p. ??) Displayed when a Favorite channel is selected. Displayed when a Call channel is selected. 11 CALL CHANNEL ICON (p. ??) 12 DUPLEX CHANNEL ICON Displayed when a Duplex channel is selected. 13 SOFTWARE KEY FUNCTION DISPLAY (pp. ??) The functions of each keys are displayed. L Key Locked is displayed while the Lock function is ON. 5 14 POSITION/TIME READOUTS Readouts the current position and time when valid GPS data is received, or when manually entered. Received GPS data:

No Position No Time is displayed if no GPS data is received for 2 minutes after turning ON the transceiver, and then a warning message is displayed.

?? blinks if no GPS data is received for 30 seconds after receiving valid GPS data, and then ?? and a warning message are displayed alternately after 10 minutes. A warning message is displayed if no GPS data is received for 4 hours after receiving valid GPS data. L Local is displayed when the UTC Offset time is set. (p. ??) Manually entered GPS data:

A manually entered GPS data is valid for 4 hours, and then a warning message is displayed. L Manual is displayed. 15 CHANNEL NAME The channel name is displayed, if entered. (p. ??) SCAN or SCAN 16:

Displayed while scanning. (p. ??) DUAL 16 or TRI 16:

Displayed while using the Dualwatch or Tri-watch function. (p. ??) 16 OPERATING CHANNEL NUMBER

(pp. ??) Displays the selected operating channel number. 17 STATUS INDICATOR STBY: Standby mode. RT:

Displayed while in the Radio Telephone (RT) mode. L Returns to the Standby mode if no operation occurs during the preset period of time. DSC:

Displayed while in the DSC mode. 18 STATUS INDICATOR (p. ??) TX:

Displayed while transmitting. MONI: Displayed while the Monitor function is activated. BUSY: Displayed while receiving, or the squelch is open. PANEL DESCRIPTION 3 Software Keys Various often-used functions are assigned to the Software Keys for easy access. The functions icons are displayed above the Software Keys, as shown below. D Selecting a Software Key function 1. Push [] or [] to slide through the selectable functions that are assigned to the Software Keys. 2. Push the Software Key under the functions icon to select the function. NOTE:

The displayed icons or their order may differ, depending on the transceiver version or the presetting. Ask your dealer for presetting details. When the MMSI code is not set, the Software Keys for the DSC function are not displayed. 6 174101518281351116391461217 3 PANEL DESCRIPTION D Software key functions Key Function Push to display the Compose Distress screen to select the nature of distress, then push the [DISTRESS] (red key) to make a call. Reference NEVER MAKE A DISTRESS CALL IF YOUR SHIP OR A PERSON IS NOT IN AN EMERGENCY. A DISTRESS CALL SHOULD BE MADE ONLY WHEN IMMEDIATE HELP IS NEEDED. Push to compose an Individual call, Group call, All Ships call or a Test call. Push to display the Unread list screen. Push to start or stop a Normal or Priority scan. Dualwatch / Tri-watch Push to start or stop Dualwatch or Tri-watch. Channel/

Weather channel Push to select regular channels or Weather channels. L While the Call channel or Channel 16 is displayed, push this key to return to the regular channel mode. Push to set the output power to high or low. L Some channels are set to only low power. Push to display the AIS plotter screen. Push to save your position information to the transceiver. p. ?

Push to start navigation. While navigating, push to stop navigation. Push to start the Man Overboard (MOB) mode. While in the Man Overboard (MOB) mode, push to stop the Man Overboard (MOB) mode. Hold down to turn ON the AquaQuake function to clear water from the speaker grill. Push to select a Favorite channel. Hold down for 1 second to set the selected channel as a Favorite channel or clear it as a Favorite channel. Push to edit the name of the displayed channel. Push to display the backlight brightness adjustment screen. L While in the adjustment mode, push []/[][]/[] to adjust the brightness of the display and keys backlight to between 1 and 7, or OFF. Push to display the received call log or distress message log. Compose Distress Other DSC Unread Scan

High/Low AIS Waypoint Navigation Stop Navigation MOB Stop MOB AquaQuake Favorite channel Channel Name Backlight LOG 7 p. ?

p. ?

p. ?

p. ?

p. ?

p. ?

p. ?

p. ?

p. ?

p. ?

p. ?

p. ?

p. ?

p. ?

p. ?

5 PREPARATIONS Entering the MMSI code The Maritime Mobile Service Identity (MMSI: DSC self ID) code consists of 9 digits. You can only enter the code when turning ON the transceiver for the first time. This initial code entry can be done only once. After entering, it can be changed only by your dealer or distributor. If your MMSI code has already been entered, this entry is not necessary. 1. Hold down [

] to turn ON the transceiver. Three short beeps sound, and Push [ENT] to register your MMSI is displayed. 2. Push [ENT] to start entering the MMSI code. The MMSI Input screen is displayed. L Push [CLR] twice to skip the entry. If you skip the entry, you cannot make a DSC call. To enter the code after skipping, turn OFF the power, and then turn it ON again. 3. Enter the MMSI code. TIP:

Select a number using [] and []. Push [ENT] to enter the selected number. Select or , to move the cursor. 4. Repeat step 3 to enter all 9 digits. 5. Select [Finish], and then push [ENT] to set the entered code. The Confirmation screen is displayed. 6. Enter your MMSI code again to confirm. When a different code is entered from the MMSI Input screen, MMSI does not match. is displayed. Enter a code again in step 2. 7. Select [Finish], and then push [ENT] to set the entered code. L When your MMSI code is successfully entered, MMSI registered successfully. is briefly displayed, and then enters the operating screen. L Your MMSI code is also displayed on the operating screen. 13 6 BASIC OPERATIONS Selecting a channel NOTE: Before using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. To avoid damage to the transceiver, turn OFF the transceiver before charging. D Regular Channel You can select a channel by pushing [] or []. D Channel 16 Channel 16 is the distress and safety channel. It is used to establish the initial contact with a station and for emergency communications. Channel 16 is monitored during both Dualwatch and Tri-watch. While in the standby mode, you must monitor Channel 16. z Push [16/C] to select Channel 16. L To return to the previously selected channel, push [CHAN] or

[CH/WX]. D Call channel Each Channel Group has separate leisure-use Call channels. The Call channel is monitored during Tri-watch. The Call channels can be selected and used to store your most often used channel in each Channel Group, for quick recall. L See page 13 for details on setting the Call channel. z Hold down [16/C] for 1 second to select the Call channel. The Call channel number and CALL are displayed. L To return to the previously selected channel, push [CHAN] or

[CH/WX]. D Selecting a Channel Group Channel Groups are preset into your transceiver. You can select the Channel Group between USA, International, Canadian, DSC, and ATIS depending on the transceiver version.

[MENU] > Settings > Radio > Channel Group 1. Push [MENU]. The Menu screen is displayed. 2. Push [] or [] to select Settings, and then push [ENT]. The Settings screen is displayed. 3. Push [] or [] to select Radio and then push [ENT]. The Radio screen is displayed. 4. Push [] or [] to select Channel Group, and then push

[ENT]. The Channel Group screen is displayed. 5. Push [] or [] to select the Channel Group, and then push [ENT]. The transceiver returns to the previous screen. L The selected Channel Groups icon is displayed on the operating screen. 15 BASIC OPERATIONS 6 Weather channels and Weather Alert The USA and Export version transceivers have 10 preset Weather channels. The transceivers are capable* of monitoring broadcasts from the National Oceanographic and Atmospheric Administration (NOAA). The transceiver automatically detects a Weather alert tone on the selected weather channel, or while scanning.

*When used within range of the broadcasts. D Selecting a Weather channel 1. Push [CH/WX]. WX is displayed on the operating screen instead of the Channel Group. 2. Push [] or [] to select a Weather channel. The Weather channel list WX channel 1 2 3 4 5 Frequency

(MHz) 162.550 162.400 162.475 162.425 162.450 WX channel 6 7 8 9 10 Frequency

(MHz) 162.500 162.525 161.650 161.775 163.275 D Setting the Weather Alert To receive the weather alert, set the WX Alert to ON with Scan or ON.

[MENU] > Settings > Radio > WX Alert 1. Push [MENU]. 2. Push [] or [] to select Settings, and then push [ENT]. The Settings screen is displayed. 3. Push [] or [] to select Radio, and then push [ENT]. The Radio screen is displayed. 4. Select WX Alert, and then push [ENT]. The WX Alert screen is displayed. 5. Select ON with Scan or ON. is displayed next to the weather channel icon. L WX blinks until you push a key after detecting an alert. 16 174101518281351116391461217 6 BASIC OPERATIONS Adjusting the volume level 1. Push [VOL/SQL]. The volume level adjustment screen is displayed. 2. Push [], [], [], or [] to adjust the audio volume level. L You can also push [MUTE] to select OFF, or [LOUD] to set the maximum volume level. L If no key is pushed for 5 seconds, the screen automatically closes. 3. Push [ENT] to set. Adjusting the squelch level Squelch enables the audio to be heard only while receiving a signal that is stronger than the set level. A higher level blocks weak signals, so that you can receive only stronger signals. A lower level enables you to hear weak signals. 1. Push [VOL/SQL] twice. The squelch level adjustment screen is displayed. 2. Push [], [], [], or [] to adjust the squelch level. L If no key is pushed for 5 seconds, the adjustment screen automatically closes. 3. Push [ENT] to set. Setting the Call channel By default, a Call channel is set in each Channel Group. You can set your most often-used channel as your Call channel in each Channel Group for quick recall. 1. Open the Call Channel screen.

[MENU] > Settings > Radio > Call Channel 2. Push [] or [] to select the channel. 3. Push [ENT] to set the selected channel as the Call channel. The transceiver returns to the previous screen. 17 BASIC OPERATIONS 6 Receiving and transmitting CAUTION: DO NOT transmit without an antenna. 1. Push [] or [] to select the channel to call on. L You cannot transmit on Channel 70. L is displayed while receiving a signal. is displayed while transmitting. 3. Release [PTT] to receive. 2. Hold down [PTT] and speak into the microphone at your normal voice level. 2 Hold down [PTT] to transmit 3 Release [PTT] to receive 1 Select a channel 2 Speak into the microphone TIP: To maximize the readability of your transmitted signal, pause for a second after pushing [PTT] and hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, and then speak at your normal voice level. NOTE:

To conserve battery power, the Power Save function automatically turns ON when no signal is received for 5 seconds. When the temperature is extremely high, the battery protection function automatically sets transceiver power to Low, and disables High power selection. Except for the Export version, the Time-out Timer function cuts OFF transmission after 5 minutes of continuously transmitting, to prevent prolonged transmission. 10 seconds before transmission is cut OFF, a beep sounds and TOT blinks to indicate that the transmission will be cut OFF. After it is cut OFF, TIME OUT is displayed for 10 seconds, and you cannot transmit until it disappears. The Noise Cancel function reduces random noise components in the transmit and/or received signal. See page ? for details. 18 174101518281351116391461217 6 BASIC OPERATIONS Lock function The Lock function electronically locks all keys except for

the channel, or accessing the functions.

], [PTT], and [DISTRESS]. This function enables you to prevent accidentally changing z Hold down [CLR ] for 1 second to turn the Lock function ON or OFF. is displayed on the bottom of the display while the Lock function is ON. Monitor function The Monitor function temporarily cancels the Squelch function to check for weak signals. 1. Hold down [VOL/SQL] to turn ON the Monitor function. L The Monitor function is ON while [VOL/SQL] is held down. If there is a weak signal, you can hear the signal and noise. is displayed. (2 beeps?) 2. Release to turn OFF. TIP: You can change the Monitor function settings. See page ? for details. 19 BASIC OPERATIONS 6 AquaQuake Water Draining function Water in the speaker grill may muffle the sound coming from the speaker. The AquaQuake Water Draining function removes water from the speaker grill by vibrating the speaker. CAUTION: DO NOT use the AquaQuake Water Draining function when an external speaker microphone is connected. 1. Push [] or [] to select 2. Hold down the software key below

. to turn ON the function. A low frequency vibration beep sounds to drain the water, regardless of the volume level setting. L This function is activated for a maximum of 10 seconds, even if you continue to hold down 3. Release the key to turn OFF the function. Editing a channel name You can edit the name of each operating channel and weather channel, using numbers, uppercase letters, symbols, and a space. This enables easy recognition of the channels or stations. All VHF marine channels are set with default names. 1. Push [] or [] to select the channel to edit. 2. Push [] or [] to select

. L You cannot edit a channel name during Dualwatch, Tri-

watch, or a Scan. 3. Push The Channel Name screen is displayed. 4. Edit the channel name. 5. Select [Finish], and then push [ENT] to save the edited name and return to the operating screen. TIP:

Select [? $ !] to enter characters, and select [A1] to enter numbers and letters. Select characters or space using []/[]/[]/[]. Push [ENT] to enter the selected character. Select or on the screen to move the cursor. 20 174101518281351116391461217 13 SPECIFICATIONS AND OPTIONS Specifications L All stated specifications are subject to change without notice or obligation. L Measurements made without an antenna. General Frequency coverage TX RX DSC AIS Type of emission Antenna impedance Input impedance (MIC) Output impedance

(audio) Intermediate frequency External Internal MAIN DSC AIS Operating temperature range Power supply voltage Current drain

(at 7.2 V DC)

(approximate) Receive Maximum audio Transmit Dimensions

(projections not included) Weight (approximate) Transmitter Rated output power Modulation Maximum frequency deviation Frequency error Spurious emissions (typical) Adjacent channel power Audio harmonic distortion

(at 60% Deviation) Residual modulation Audio frequency response 156.025 MHz ~ 157.425 MHz 156.050 MHz ~ 163.275 MHz 156.525 MHz 162.025 MHz 16K0G3E,16K0G2B,16K0GXW(GMSK) 50 nominal 2 k 8 1st: 30.15 MHz, 2nd: 450 kHz 1st: 46.35 MHz, 2nd: 450 kHz 1st: 40.85 MHz, 2nd: 450 kHz 20C ~ +60C, 4F ~ +140F Negative ground: 7.2 V DC nominal External speaker: 0.35 A Internal speaker: 0.7 A 6 W: 1.5 A 1 W: 0.7 A 64 (W) 144.5 (H) 39 (D) mm 2.5 (W) 5.7 (H) 1.5 (D) in 335 g, 11.8 oz

(including battery pack, antenna, and belt clip) 6 W or 1 W Variable reactance frequency modulation 5 kHz 10 ppm 68 dBc 70 dB 10%

40 dB

+1 dB ~ 3 dB of 6 dB octave from 300 Hz ~ 3000 Hz 54 SPECIFICATIONS AND OPTIONS 13 70 dB 70 dB 40 dB

+1 dB ~ 3 dB of 6 dB octave from 300 Hz ~ 3000 Hz Receiver Sensitivity (typical) Squelch sensitivity

(threshold, typical) Audio output power

(at 10% distortion) External

(with 8 ) Internal

(with 8 ) Adjacent channel selectivity

(typical) Spurious response (typical) Intermodulation (typical) Hum and noise Audio frequency response Receiver (DSC) Sensitivity (typical) Adjacent channel selectivity

(typical) Spurious response (typical) Intermodulation (typical) Receiver (AIS) Sensitivity (typical) Adjacent channel selectivity

(typical) Spurious response (typical) Intermodulation (typical) GNSS Receiver Receiver frequency GPS GLONASS SNR 0.25 V (12 dB SINAD) 0.25 V 0.35 W (typical) 1.5 W (typical) 70 dB 3 dB emf (1% BER) 73 dB emf (1% BER) 73 dB emf (1% BER) 68 dB emf (1% BER) 107 dBm (20% PER) 50 dB (20% PER) 50 dB (20% PER) 50 dB (20% PER) 1575.42 MHz 1598.0625 MHz ~ 1605.375 MHz

>40 dB 55 174101518281351116391461217 13 SPECIFICATIONS AND OPTIONS Options Some options may not be available in some countries. Please ask your dealer for details. D Battery pack BP-306 li-ion battery pack 7.2 V 2280 mAh (minimum), 2400 mAh (typical) D Others FA-SC59V antenna MB-133 belt clip MB-96F/MB-96FL leather belt hanger HM-165/HM-228 speaker microphone Voltage:

Capacity:

Battery life: Approximately 11 hours*

* When the Power Save function is ON, and the operating periods are calculated under the following conditions:

TX : RX : standby = 5 : 5 : 90 D Charger BC-251 desktop charger

+BC-123S ac adapter To rapidly charge a battery pack. Full sized waterproof speaker microphone including alligator type clip to attach to your shirt or collar, and so on. CP-25H/CP-26 cigarette lighter cable For charging with the BC-251 desktop charger through a 12 V cigarette lighter socket. NOTE: The CP-25H is equipped with a 1 A fuse, and the CP-26 is equipped with a 1.5 A fuse. If the fuse blows, repair the problem, then replace it with a new rated fuse. DO NOT use fuses with amp ratings other than the ratings written below. Fuse CP-25H: (1 A/250 V) CP-26:

(1.5 A/250 V) 56 SPECIFICATIONS AND OPTIONS 13 Using the HM-165 Alligator type clip To attach the speaker microphone to your shirt or collar. PTT switch Push to transmit. Release to receive. Microphone Speaker Turn the transceiver power OFF when connecting the HM-165. NOTE:

NEVER immerse the connector in water. If the connector becomes wet, BE SURE to dry it before attaching to the transceiver. The microphone element is located at the top of the speaker microphone, as shown in the illustration above. To maximize the readability of your transmitted audio, hold the microphone approximately 5 ~ 10 cm (2 ~ 4 inches) from your mouth, and then speak at your normal voice level. If the audio sound becomes muffled, remove any water that may be inside the speaker grill and/or microphone hole. The DSC alarms sound from the transceiver, even while the speaker microphone is attached. D Attaching the HM-165 1. Turn OFF the power. 2. Insert the speaker microphone connector into the connector and securely screw it, as shown below. L Be careful not to cross-thread the connection. CAUTION: Attach the speaker microphone connector securely to prevent accidental loss, or water intrusion into the connector. Detaching: Rotate the jack cover counter-

clockwise, and then detach it. Attaching: Attach the jack cover, and then rotate it clockwise completely. NOTE: KEEP the jack cover attached when the speaker microphone is not used. If the cover is not attached, water will get into the transceiver. Moreover, the terminals (pins) will become rusty, or the transceiver will function abnormally if the connector gets wet. 57 174101518281351116391461217 1-1-32 Kamiminami, Hirano-ku,Osaka 547-0003, JapanA7615?-1EXPrinted in Japan 2020 Icom Inc. Oct. 2020

fe ICOM _ Model:IC-M94D meee PHA ak sl!) IC:202D-418800 IPX7:1m 30min HVIN:418800-01 IAN Restricted to occupational use to

( (PPR \

eatiefy ECC RE aynociira limite AS CCRIS mennor operating KOU CASS arse WARNING: TO RELIABLY RECEIVE GPS SATELLITE SIGNALS OUTDOORS, AIM THE GPS SYMBOL TOWARDS THE SKY. SERIAL NO. Icom Inc. MADE IN JAPAN

Icom Inc. 1-6-19, Kamikuratsukun, Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax : +81 6 6793 3336 email: world_support@icom.co.jp URL : http:/Avww.icom.co.jpAvorid Date: October 14, 2020 To Whom It May Concern Subject: FCC Part80 Letter Applicant: Icom Incorporated Product: Marine VHF transceiver Model: IC-M94D FCC ID: AFJ418800 Dear Sir/Madam, This equipment meets the requirements of the FCC Rules, Parts 80.203(b)3, as applicable. Programming of this product's transmit frequencies can be performed ONLY by the manufacturer or by service or by maintenance personal. The operator cannot program transmit frequencies using the equipments external operation controls. Best regards Icom Incorporated a Abe Li Atsushi Tomiyama General Manager of Quality Assurance Department

!com Inc. 1-6-19, Kamikuratsukuri, Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax: +81 6 6793 3336 e-mail: world_support@icom.co.jp URL : http:/Avwww.icom.co.jpAvorid Date: October 14, 2020 To Whom It May Concern Subject: 80.225 Requirements for selective calling equipment Applicant: Icom Incorporated Product: Marine VHF transceiver Model: IC-M94D FCC ID: AFJ418800 Dear Sir/Madam, This equipment meets the requirements of ITU-R Recommendation ITU-R M.493-13, Digital Selective-calling System for Use in the Maritime Mobile Service, with Annexes 1, 2, 3, and 4(10/2009)(incorporated by reference, see 80.7), and IEC 62238, First edition. Best regards Icom Incorporated Atsushi Tomiyama General Manager of Quality Assurance Department

Icom Inc. 1-6-19,Kamikuratsukun, Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax : +81 6 6793 3336 e-mail: world_support@icom.co.jp URL : http:/Awww.icom.co.jpAworld Date: October 14, 2020 To Whom It May Concern Subject: Authority to Act as an Agent Applicant: Icom Incorporated Product: Marine VHF transceiver Model: IC-M94D FCC ID: AFJ418800 Dear Sir/Madam, We hereby appoint UltraTech Engineering Labs Inc. (UltraTech) to act as our agent in preparation of this application for authorization of above equipment under F.C.C. Rules. We hereby certify that neither the application nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CRF 1.2002(b) for the definition of a party for these purposes. We also certify that the information provided, property describe the device or system for which authorization is required. Best regards Icom Incorporated Atsushi Tomiyama General Manager of Quality Assurance Department

Icom Inc. 1-6-19, Kamikuratsukuri, Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax: +81 6 6793 3336 email: world_support@icom.co.jp URL : http:/Awww.icom.co.jp/world Date: October 15, 2020 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern Subject: Attestation letter for marine VHF DSC portable radio, FCC ID: AFJ418800 Icom Inc hereby submits application for certification of FCC ID: AFJ418800, a marine VHF DSC portable radio with GPS. This radio designed to meet ITU-RM493-15, Class H portable standard. Since the Commission currently regulated to comply with ITU-RM-493-13 as stated in section 80.7(c)(3) and 80.225(a)(ii), Icom hereby request the Commission to accept the superseded ITU-RM493-15 standard for demonstrating compliance for this radio. Icom further confirms the radio meets all requirements of superseded ITU-RM-493-15 standard for Class H radio except the multi-task feature of Annex 4 which is applicable for Class A radio. Also, for ITU-RM-493-13 standard that is stated in current part 80 regulation, the following features are not applicable for Class H portable radio.

@ Multi-Task features in Annex 4, applicable for Class A radio

@ Section 12.6 data I/O

@ Section 12.7 Position data input Please contact me if you require any additional information. Sincerely, Icom Incorporated Akira Yamashita General Manager of Engineering Department 6

Icom Inc. 1-6-19, Kamikuratsukuri, Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax: +816 6793 3336 e-mail: worid_support@icom.co.jp URL : http:/Avww.icom.co.jpAvord Date: October 14, 2020 To Whom It May Concern Subject: Confidentiality and Short-Term Confidentiality Letter Applicant: Icom Incorporated FCC ID: AFJ418800 Dear Sir/Madam:

The applicant would like to request the following documents submitted with this application for certification be withheld from public disclosure as per Section 0.457 & 0.459 of FCC Rules. Confidential 1. Operational Description 2. Block Diagram 3. Schematics 4. Parts List 5. Tuning Info Short-Term Confidential for 120 days 6. External Photos 7. Internal Photos 8. Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation shall not be made. Regards Icom Incorporated Atsushi Tomiyama General Manager of Quality Assurance Department

November 25, 2020 Ultratech Engineering Labs, Inc. 3000 Bristol Circle Oakville, Ontario L6H 6G4 Subject:

Equipment Authorization under FCC 47 CFR, Parts 2, 80 (Marine in 156.025-157.425 MHz Band) - Non-Broadcast Radio Transceivers. ICOM Incorporated VHF Marine Transceiver IC-M94D AFJ418800 Applicant:

Product:

Model:

FCC ID:

Dear Sir/Madam:

As appointed agent for ICOM Incorporated, we submit the application for FCC certification of the above product. Kindly review all required documents uploaded to your E-Filing Site. If you have any queries, please do not hesitate to contact us. Yours truly, Santhosh Fernandez Santhosh Fernandez Authorized Agent FCC TCB & ISED CB APEC TEL #CA0001 1309 CA 0001/2049 AT-1945 SL2-IN-E-1119R Korea KCC-RRL CA0001 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: vic@ultratech-labs.com

Icom Inc. 1-6-19, Kamikuratsukuri, Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax: +81 66793 3336 e-mail: world_support@icom.co.jp URL : http:/Avww.icom.co.jpAvorid Date: October 14, 2020 To Whom It May Concern Subject: Manufactures Letter Applicant: Icom Incorporated Product: Marine VHF transceiver Model: IC-M94D FCC ID: AFJ418800 Dear Sir/Madam, Please be advised that the manufacture will ensure that the above-referenced model will be manufactured in accordance with the FCC Rules and Regulations. Thank you for your attention to this matter. Icom Incorporated Atsushi Tomiyama General Manager of Quality Assurance Department

ICOM IC-M94D For USA Only Suppliers Declaration of Conformity 47 CFR 2.1077 Compliance Information Unique Identifier:

Trade Name Model Name:

Responsible party:

Company name Address U.S. Contact Information: 800-USA-ICOM (800-872-4266) FCC Compliance Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Icom America Inc. 12421 Willows Road NE Kirkland, WA 98034 Monday - Friday 7AM to 5PM PST