all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Updated Manual | Users Manual | 2.21 MiB | ||||
1 2 3 |
|
User Manual | Users Manual | 3.10 MiB | June 06 2008 / September 06 2008 | |||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Attestation Statements | June 06 2008 / September 06 2008 | ||||||
1 2 3 | Cover Letter(s) | June 06 2008 / September 06 2008 | ||||||
1 2 3 | Cover Letter(s) | June 06 2008 / September 06 2008 | ||||||
1 2 3 | Internal Photos | June 06 2008 / September 06 2008 | ||||||
1 2 3 | ID Label/Location Info | June 06 2008 / September 06 2008 | ||||||
1 2 3 | Cover Letter(s) | June 06 2008 / September 06 2008 | ||||||
1 2 3 | RF Exposure Info | June 06 2008 / September 06 2008 |
1 2 3 | Updated Manual | Users Manual | 2.21 MiB |
INSTRUCTION MANUAL VHF P25 TRUNKING HANDHELD TRANSCEIVERS iF9011B/S/T UHF P25 TRUNKING HANDHELD TRANSCEIVERS iF9021B/S/T iF9023B/S/T The photo shows the 10-key type VHF transceiver. IMPORTANT READ ALL INSTRUCTIONS carefully and com-
pletely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This instruction manual contains important oper ating instructions for the IC-F9011B/S/T VHF P25 TRUNKING HANDHELD TRANSCEIVERS and the IC-F9021B/S/T, IC-F9023B/S/T UHF P25 TRUNKING HANDHELD TRANSCEIVERS. When the optional UT-125 aes/des encryption unit is installed:
When you attempt to re-export this product and/or AES en-
cryption of this product is activated, you must comply with the export regulations of your country, which can be highly restric-
tive. YOUR FAILURE TO COMPLY WITH EXPORT REGULA-
TIONS MAY SUBJECT YOU TO FINES OR PENALTIES. AES encryption products including this software fall under the con-
trol of the Japanese Government as described in Appendix I:
Export Legal Controls and Appendix: Exchange Legal Con-
trols. Please consult with your dealer or sales representative for details. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders. i EXPLICIT DEFINITIONS WORD RDANGER!
RWARNING!
CAUTION NOTE DEFINITION Personal death, serious injury or an explo-
sion may occur. Personal injury, fire hazard or electric shock may occur. Equipment damage may occur. If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. See the operating guide for details of Analog, MDC and P25 Trunking/Conventional system operations. Consult your Icom dealer or system operator for details concern-
ing your transceivers programming. INFORMATION:
In this instruction manual, the following descriptions are used;
IC-F9011B/IC-F9021B/IC-F9023B : Non-display type IC-F9011S/IC-F9021S/IC-F9023S : Simple type IC-F9011T/IC-F9021T/IC-F9023T : 10-key type Non-display type Simple type 10-key type FCC INFORMATION ABOUT IPR FOR CLASS B UNINTENTIONAL RADIATORS:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following mea-
sures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and re-
ceiver. Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV techni-
cian for help. This device is made under license under one or more of the following U.S. Patents: #4,590,473; #4,636,791; #5,148,482;
#5,185,796; #5,271,017; #5,377,229; #4,716,407; #4,972,460;
#5,502,767; #5,146,497; #5,164,986; #5,185,795; #5,164,986,
#5,185,795, and #5,146,497.
* IPR means Intellectual Property Rights. VOICE CODING TECHNOLOGY The AMBE+2 voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed sole-
ly for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to extract, remove, decompile, reverse engineer, or disassem-
ble the Object Code, or in any other way convert the Object Code into a human-readable form. U.S. Patent Nos.
#5,870,405, #5,826,222, #5,754,974, #5,701,390,
#5,715,365, #5,649,050, #5,630,011, #5,581,656,
#5,517,511, #5,491,772, #5,247,579, #5,226,084 and
#5,195,166. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ii PRECAUTIONS R DANGER! NEVER short the terminals of the bat-
tery pack. R WARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 5 to 10 cm
(2 to 4 in.) away from the lips and the transceiver is vertical. R WARNING! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. CAUTION: NEVER use non-Icom battery packs/charg-
ers to prevent the loss of the transceivers good performance and warranty. DO NOT push [PTT] when not actually desiring to transmit. DO NOT use or place the transceiver in direct sunlight or in areas with temperatures below 30C (+22F) or above
+60C (+140F). The basic operations, transmission and reception of the transceiver are guaranteed within the specified operating temperature range. However, the LCD display may not oper-
ate correctly, or show an indication in the case of long hours of operation, or after being placed in extremely cold areas. iii DO NOT modify the transceiver. The transceiver warranty does not cover any problems caused by unauthorized modi-
fication. BE CAREFUL! The transceiver meets IP57 require-
ments for dust-protection and waterproof protection. How-
ever, once the transceiver has been dropped, dust-protection and waterproof protection cannot be guaranteed due to the fact that the transceiver may be cracked, or the waterproof seal damaged, etc. For U.S.A. only CAUTION: Changes or modifications to this transceiver, not expressly approved by Icom Inc., could void your author-
ity to operate this transceiver under FCC regulations. Approved Icom optional equipment is designed for optimal performance when used with an Icom transceiver. Icom is not responsible for the destruction or damage to an Icom transceiver in the event it is used with equipment that is not manufactured or approved by Icom. 4 BATTERY CHARGING ............................................1720 Caution .......................................................................17 Optional battery chargers ...........................................19 5 BATTERY CASE ............................................................21 Optional battery case (BP-237) ..................................21 6 SPEAKER MICROPHONE ............................................22 Optional HM-184/H description ..................................22 To attach .....................................................................22 7 OPTIONS .................................................................2325 8 SAFETY TRAINING INFORMATION .............................26 TABLE OF CONTENTS IMPORTANT .......................................................................... i EXPLICIT DEFINITIONS ....................................................... i FCC INFORMATION ............................................................ ii ABOUT IPR .......................................................................... ii VOICE CODING TECHNOLOGY ......................................... ii PRECAUTIONS ................................................................... iii TABLE OF CONTENTS ....................................................... iv 1 ACCESSORIES ...........................................................12 Supplied accessories ...................................................1 Accessory attachments ................................................1 2 PANEL DESCRIPTION ..............................................311 Front panel ...................................................................3 Function display (Simple/10-key types only) ................5 Programmable function keys ........................................6 3 BASIC OPERATION ................................................1216 Turning power ON ......................................................12 Channel selection .......................................................12 Receiving and transmitting .........................................13 User set mode ............................................................14 Clock function .............................................................15 LED indicator (Non-display type only) ........................16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 iv 1 ACCESSORIES Supplied accessories The following accessories are supplied. Battery pack Flexible antenna Belt clip Connector cover
(with screw) D Battery pack To attach the battery pack:
Slide the battery pack on the back of the transceiver in the direc-
tion of the arrow (q), then lock it with the battery release button. Slide the battery pack until the battery release button makes a click sound. To release the battery pack:
Slide the battery release button in the direction of the arrow
(w) as shown below. The battery pack is then released. NEVER release or attach the battery pack when the trans-
ceiver is wet or soiled. This may result water or dust get-
ting into the transceiver/battery pack and may result in the transceiver being damaged. Accessory attachments D Flexible antenna Connect the supplied flexible antenna to the antenna con-
nector. Battery pack q CAUTION:
NEVER carry the transceiver by holding the antenna. DO NOT connect the antenna other than listed on p. 23. Transmitting without an antenna may damage the transceiver. 1 w Battery release button NOTE: Keep the battery pack terminals clean. Its a good idea to clean the battery pack terminals once a week. D Belt clip To attach the belt clip:
q Release the battery pack if it is attached. w Slide the belt clip in the direction of the arrow until the belt clip is locked and makes a click sound. To detach the belt clip:
q Release the battery pack if it is attached. w Pinch the clip (q), and slide the belt clip in the direction of the arrow (w). w q ACCESSORIES 1 D Connector cover Attach the connector cover when the optional equipment is not used. To attach the connector cover:
q Insert the connector cover into the multi-connector. w Tighten the screw. CAUTION:
Attach the connector cover when the optional equipment is not used. Otherwise the terminals of the multi-con-
nector may be shorted by metal object, etc., and this could damage the transceiver. To detach the connector cover:
q Unscrew the screw using a phillips screwdriver. w Detach the connector cover for the optional equipment connector. Multi-
connector w Connector cover q q w 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2 2 PANEL DESCRIPTION Front panel q w e r i u y t Speaker Microphone Function display*1
(p. 5) o*1
!0*1
*1 Simple/10-key types only
*2 10-key type only
!5
!4
!3
!2*1
!1*2 e LED INDICATOR Lights green while receiving a signal, or when the squelch is open. Lights red while transmitting. The LED indicator indicates some information. (Non-
display type only) (p. 16) r DEALER-PROGRAMMABLE ABC SWITCH Desired function can be programmed to each position
(A, B or C) independently by your dealer. (p. 11) To activate the pre-programmed function, set the white line of the ABC switch to the position A, B or C. White line q ANTENNA CONNECTOR Connects the supplied antenna. (p. 1) w DEALER-PROGRAMMABLE KEY [EMR]
Desired function can be programmed by your dealer. (p. 6)
[Emergency] is pre-programmed as default. (See the operating guide for details.) When the white line of the ABC switch is set to the position C, the pre-programmed function at position C will be activated. 3 t CHANNEL INDICATOR Lights white according to the Backlight setting of the user set mode. When you rotate [Rotary selector] to select the channel or zone, set the desired channel/zone number to this point. y DEALER-PROGRAMMABLE TOGGLE SWITCH Desired function can be programmed by your dealer.
(p. 11) When the toggle switch is set to the left side (
programmed function will be activated.
), the pre-
u VOLUME CONTROL [VOL]
Rotate to turn the power ON/OFF and adjust the audio level. i ROTARY SELECTOR Rotate to select the pre-programmed memory channels or the operating zone. (Depending on the pre-setting) The channel/zone that is positioned to the channel indicator (t) is selected as the operating channel/zone. Depending on the pre-setting, selecting channel 1 using the ro-
tary selector starts a scan. (Rotary Selector Home function) o DEALER-PROGRAMMABLE KEYS
[I]/[II]/[III]/[]/[]/[]/[] (Simple/10-key types only) Desired function can be programmed independently by your dealer. (p. 6)
!0 APP KEY [APP] (Simple/10-key types only) Desired function can be programmed by your dealer. (p. 6) PANEL DESCRIPTION 2
!1 10-KEYPAD (10-key type only) The keypad allows you to enter digits to:
Select memory channels, tone channels and DTMF codes (while in the DTMF code channel selection mode.) Start up with the password Input the Individual ID code for digital operation. (Depending on the pre-setting)
!2 HOME KEY [HOME] (Simple/10-key types only) Desired function can be programmed by your dealer. (p. 6)
[Home] is pre-programmed as default. (See p. 7 for details.)
!3 PTT SWITCH [PTT]
Push and hold to transmit; release to receive. Depending on the pre-setting, when an external unit with its own PTT switch* is connected to the multi-connector, the transceiv-
ers [PTT] is disabled.
* Such as an optional speaker-microphone or headset.
!4 DEALER-PROGRAMMABLE KEYS
[Side1]/[Side2]/[Side3]
Desired function can be programmed independently by your dealer. (p. 6)
!5 MULTI-CONNECTOR Connect optional equipment. Connector cover NOTE: Attach the connector cover when the optional equipment is not used. See p. 2 for details. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4 2 PANEL DESCRIPTION Function display (Simple/10-key types only) q e trw y ou i 001 ch-01 IC-F9011
!0 MON CLCK ZONE !1 q SIGNAL STRENGTH INDICATOR Indicates relative signal strength level. Weak Strong w LOW POWER INDICATOR Appears when low output power is selected. When high output power is selected, no indicator appears. e AUDIBLE INDICATOR Appears when the channel is in the audible (unmute) con-
dition. r COMPANDER INDICATOR Appears when the compander function* is activated.
* Analog mode operation only. 5 t SCRAMBLER INDICATOR Appears when the voice scrambler or encryption function is activated. y BELL INDICATOR Appears/blinks when the matched signal is received, ac-
cording to the pre-programming. u TELEPHONE INDICATOR Appears when a phone call* is received.
* P25 operation only. i SHORT MESSAGE INDICATOR Appears when an Status message or Short message is received. o BATTERY INDICATOR Appears or blinks when the battery power decreases to a specified level. Indication Battery level Full Middle Charging required No battery blinks when the battery is exhausted.
!0 ALPHANUMERIC DISPLAY Displays an operating channel number, channel name, Set mode contents, DTMF code, etc.
!1 KEY INDICATOR Indicate the programmed function of the front panel keys
([I], [II] and [III]). See the operating guide for details of Analog, MDC and P25 Trunking/Conventional system operations. Consult your Icom dealer or system operator for details concern-
ing your transceivers programming. PANEL DESCRIPTION 2 Programmable function keys The following functions can be assigned to the following pro-
grammable function keys and switches;
[EMR], [Side1], [Side2], [Side3], [I]*, [II]*, [III]*, []*, []*, []*,
[]*, [APP]*, [HOME]*, ABC switch and Toggle switch.
*Simple/10-key types only Consult your Icom dealer or system operator for details con-
cerning your transceivers programming. If the key indicator shows the programmed function key name, push the front panel key ([I], [II] or [III]) under the key indicator to activate the programmed function.
( The function key name in parentheses in the following expla-
nation is displayed for that key indicator; e.g. UP) For Non-display type:
The programmable key functions are limited and some key functions should be operated differently from Simple and 10-key types. (See pp. 8 and 9 for details.) For ABC and Toggle switches:
The programmable key functions to ABC and Toggle switches are limited. (See p. 11 for details.) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 6 HOME KEY HOME Push to return to the stand-by mode. After editing some information that requires to be memorized, push this key to save the editing contents in the memory before returning to the stand-by mode. OPT MOMENTARY KEYS O1M O2M O3M Push to control the output signal level from the optional unit connector. 2 PANEL DESCRIPTION D For All types (Common operation) PRIO A AND PRIO B KEYS PRA PRB Push to select Priority A or Priority B channel. MR-CH 1, MR-CH 2, MR-CH 3 AND MR-CH 4 KEYS CH1 CH2 CH3 CH4 Push to select the memory channels 1, 2, 3 and 4 directly. MONI KEY MON Push to mute and release the CTCSS (DTCS), 2-tone, NAC or Talkgroup ID squelch mute. Open any squelch/de-
activate any mute while pushing and holding this key. Depending on the pre-setting, the Audible (unmute) condition may automatically return to the Inaudible (mute) condition, after a specified time period. Depending on the pre-setting, pushing and holding this key for 1 sec. cancels the scan. LOCK KEY LOCK Push and hold for 1 sec. to electronically lock all program-
mable keys except the following:
[PTT], [Moni], [Light], [Lock], [Emergency], [Surveillance] and
[OPT 1/2/3]. Push and hold for 1 sec. again to turn the function OFF. LIGHT KEY LIGT Push to turn the transceivers backlight ON for about 5 sec. when the backlight function is turned OFF in user set mode.
(p. 14) 7 D For All types (Different operation with Non-display type) When the following key functions are programmed to Non-
display type, the key functions may be limited and some key functions should be operated differently from Simple and 10-key types. HIGH/LOW KEY H/L Push to select the transmit output power temporarily or per-
manently, depending on the pre-setting. Ask your dealer for the output power level for each selection. Emits one beep when Low 1 is selected, two beeps when Low 2 is selected and three beeps when High is selected. (Non-display type only) SCAN KEY SCAN For Simple/10-key types Push to start and cancel scanning operation. When the Power ON Scan, Auto Scan, or Rotary Selector Home function starts a scan, push this key to cancel the scan. The canceled scan resumes after the specified time period has passed. Push and hold this key for 1 sec. to indicate the scan list, then push [CH Up] or [CH Down] to select a desired list.
(Depending on the presetting.) For Non-display type Push to start and cancel scanning operation. When the Power ON Scan, Auto Scan, or Rotary Selector Home function starts a scan, push this key to cancel the scan. The can-
celed scan resumes after the specified time period has passed. The LED indicator blinks green slowly while scanning. PANEL DESCRIPTION 2 SURVEILLANCE KEY SURV When this function is turned ON, the beep is not emitted and the LCD backlight does not light when a signal is received or a key is pushed. For Simple/10-key types Push to turn the surveillance function ON or OFF. For Non-display type Push and hold for 1 sec. to turn the surveillance function ON. When the surveillance function is ON, push to turn the function OFF. TALK AROUND KEY TA (Conventional operation only) The talk around function equalizes the transmit frequency to the receive frequency for transceiver-to-transceiver commu-
nication. For Simple/10-key types Push to turn the talk around function ON or OFF. For Non-display type Push and hold for 1 sec. to turn the talk around function ON. When the talk around function is ON, push to turn the function OFF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 8 2 PANEL DESCRIPTION PRIO A REWRITE AND PRIO B REWRITE KEYS PRAR PRBR For Simple/10-key types Push to select Priority A or Priority B channel. Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 sec. to rewrite the operating channel as the Priority A or Priority B channel. For Non-display type Push to select Priority A or Priority B channel. COMPANDER KEY COMP The compander function reduces noise components from the transmitted audio to provide clear communication. For Simple/10-key types Push to toggle the compander function ON and OFF. For Non-display type Push and hold for 1 sec. to turn the compander function ON. When the compander function is ON, push to turn the function OFF. OPT OUT KEYS OP1 OP2 OP3 For Simple/10-key types Push to control the output signal level from the optional unit connector. For Non-display type Push and hold for 1 sec. to control the output signal level from the optional unit connector. When this key function is activated, push to deactivate 9 the function. D For Simple/10-key types only Following key functions cannot be programmed to Non-dis-
play types. CH UP AND DOWN KEYS UP DOWN Push to select an operating channel. When [Rotary selec-
tor] selection mode is operating channel, this function is not available. Push to select a scan group after pushing and holding
[Scan]. ZONE KEY ZONE Push this key, then push [CH Up] or [CH Down] to select the desired zone. When [Rotary selector] selects operating zone, push this key to switch the range of selectable zones. What is zone? Selected channels are assigned to a zone according to how they are to be used in a group. For example, Staff A and Staff B are assigned into a Business zone, and John and Cindy are assigned into a Private zone. USER SET MODE KEY SET Push and hold for 1 sec. to enter user set mode. During in the user set mode, push this key to select an item that is enabled by your dealer, and change the value or condition by pushing [CH Up] or [CH Down]. Push and hold this key for 1 sec. again to exit user set mode. User set mode is also available via the Power ON func-
tion. Refer to p. 14 also. CLOCK KEY CLCK Push to indicate the current time on the LCD. (p. 15) While the current time is indicated, push and hold this key for 1 sec. to enter the time data edit mode. SCAN ADD/DEL (TAG) KEY SCAD Push to add the selected channel to or delete it from the scan list. 1. Push to indicate the scan list, then push [CH Up] or
[CH Down] to select the desired list. 2. Push to add the channel to or delete it from the select-
ed scan list. 3. Push and hold for 1 sec. to exit the scan list selection mode. While a scan is paused on a non-priority channel, push this key to delete the selected channel from the scan group. Depending on the pre-setting, the deleted channel is added to the scan group again, after the scan is canceled. (Nuisance Delete function) PANEL DESCRIPTION 2 AND MENU KEYS
] and [Menu ] can only be assigned to [] and MENU
( [Menu
[], respectively.) The menu mode is available when either [Menu
[Menu ] is assigned to [] or []. During menu mode, the pre-programmed menu items (up to 15) become effective with [I], [II] and [III] keys. Push [Menu
]/[Menu ] to switch the previous/next 3 menu items, and push [I], [II] or [III] to activate the programmed function. During menu mode
] or Push [Menu] or [Menu]
001 ch-01 IC-F9011 MON CLCK ZONE 001 ch-01 IC-F9011 LOCK LIGT SET Push [Menu]
or [Menu]
Push [Menu]
or [Menu]
001 ch-01 IC-F9011 SCNA PRA CH1 Menu items 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 10 SURVEILLANCE SWITCH Turns the surveillance function ON or OFF. When this function is turned ON, the beep is not emitted and the LCD backlight does not light when a signal is received or a key is pushed, etc. COMPANDER SWITCH Turns the compander function ON and OFF. The compander function reduces noise components from the transmitted audio to provide clear communication. OPT MOMENTARY SWITCHES Controls the output signal level from the optional unit con-
nector. 2 PANEL DESCRIPTION D For ABC and Toggle switches only ZONE SWITCH Selects the pre-programmed zone directly. PRIO A AND PRIO B SWITCHES Selects Priority A or Priority B channel. MR-CH 1, MR-CH 2, MR-CH 3 AND MR-CH 4 SWITCHES Selects the memory channels 1, 2, 3 and 4, directly. TALK AROUND SWITCH (Conventional operation only) Turns the talk around function ON and OFF. The talk around function equalizes the transmit frequency to the receive frequency for transceiver-to-transceiver communication. LOCK SWITCH Turns the lock function ON and OFF. All programmable keys except the following are locked:
[PTT], [Moni], [Light], [Lock], [Emergency], [Surveillance]
and [OPT 1/2/3]. HIGH/LOW SWITCH Selects the transmit output power temporarily. Ask your dealer for the output power level for each selection. 11 Turning power ON Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and opera-
tion. (p. 17) When you use the transceiver for the first time, or after the transceiver has sat unused for a long time, make sure to check the date and time indication after turning the power ON. If the time and date are not correct, reset them. (p. 15) q Rotate [VOL] to turn the power ON. w If the transceiver is programmed for a start up password, input the digit codes as directed by your dealer. 10-keypad can be used for password input depending on ver-
sion. The keys in the table below can be used for password input. The transceiver detects numbers in the same block as identical. Therefore 01234 and 56789 are the same. KEY NUMBER 0 5 1 6 2 7 3 8 4 9 e When the PASSWORD indication does not clear after in-
putting 6 digits, the input code number may be incorrect. Turn the power OFF and start over in this case. When you operate Non-display type, the password setting is not available. BASIC OPERATION 3 Channel selection Several types of channel selections are available. Methods may differ according to your system set up. NOTE: Depending on the pre-setting, EMPTY appears on the LCD when selecting an empty channel (no fre-
quency is programmed). (Simple/10-key types only) NON-ZONE TYPE:
To select the desired operating channel:
Push [CH Up] or [CH Down]. Rotate [ROTARY SELECTOR]*.
- Up to pre-programmed 16 channels can be selected. Push one of [MR-CH 1] to [MR-CH 4]. ZONE TYPE:
To select the desired zone:
Push [Zone], then push [CH Up] or [CH Down]. Rotate [ROTARY SELECTOR]*.
- Up to pre-programmed 16 zones can be selected. AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turn-
ing power ON, the transceiver automatically starts scanning. Scanning stops when receiving a call.
* Depending on the pre-setting. When [Rotary selector] selects Operating channel, [CH Up]/[CH Down] are not available, and when [Rotary selector] selects Oper-
ating zone, [Zone]/[Zone Up]/ [Zone Down] are not available. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 12 3 BASIC OPERATION Receiving and transmitting NOTE: Transmitting without an antenna may damage the transceiver. See p. 1 for accessory attachments. Receiving:
q Rotate [VOL] to turn the power ON. w Push [CH Up] or [CH Down], or rotate [ROTARY SELEC-
TOR]* to select a channel, in sequence.
*Depending on the pre-setting. e When receiving a call, adjust the audio output level to a comfortable listening level. Transmitting:
Wait for the channel to become clear to avoid interference. q While pushing and holding [PTT], speak into the micro-
phone at a normal voice level. w Release [PTT] to return to receive. IMPORTANT: To maximize the audio quality of your signal;
1. Pause briefly after pushing [PTT]. 2. Hold the microphone 5 to 10 cm (2 to 4 in.) from your mouth, then speak into the microphone at a normal voice level. D Transmitting notes Transmit inhibit function The transceiver has several inhibit functions which restrict transmission under the following conditions:
- The channel is in mute condition (Inaudible condition;
does not appear.)
- The channel is busy.
- Un-matched (or matched) CTCSS is received.
(Depending on the pre-setting.)
- Un-matched (or matched) NAC is received*.
(Depending on the pre-setting.)
*Digital mode operation only.
- The selected channel is a receive only channel. Time-out timer After continuous transmission for the pre-programmed time period, the time-out timer is activated, causing the trans-
ceiver to stop transmitting. Penalty timer Once the time-out timer is activated, transmission is further inhibited for a period determined by the penalty timer. 13 User set mode The user set mode is accessed at power ON and allows you to set seldom-changed settings. You can customize the trans-
ceiver operation to suit your preferences and operating style. When you operate Non-display type, this function is not available. Entering the user set mode:
q While pushing and holding [I] and
[II], rotate [VOL] to turn the power ON. Turn power OFF in advance. SET MODE appears for 1 sec. at power ON. w Push and hold [] to enter user set mode.
[VOL]
[I]/[II]
BASIC OPERATION 3 e Push [] several times to select the appropriate item. Then push [] or [] to set the desired level/condition. Available set mode functions are Backlight, LCD contrast, Beep, Beep Level, Ringer Level, SQL Level, AF Min Level, Mic Gain, VOX Gain*, VOX Delay*, Horn, Battery Voltage, Signal Moni, Lone Worker and System info.
* Appears only when the external VOX unit is connected.
r Push and hold [] again to exit
the user set mode. User set mode is also available using a programmable key. Refer to p. 9 [User Set Mode] section for instructions regard-
ing using the key assigned for user set mode.
[User Set Mode] allows for quick item selection. Set Enable for the often used items with the CS-F9010/F9510 cloning sfotware. Ask your dealer for details. NOTE: While in the user set mode, [], [] and [] acti-
vate regardless of the assigned key functions. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 14 3 BASIC OPERATION Clock function The transceiver indicates the current time and date when
[Clock] is pushed. And you can change the indication format and time/date settings. When you operate Non-display type, this function is not available. When you use the transceiver for the first time, or after the transceiver has sat unused for a long time, make sure to check the date and time indication after turning the power ON. If the time and date are not correct, reset them. (See Time and date settings to the right.) D Time and date indication q Push [Clock] to indicate the current time and date on the LCD. When the indication format is set to 12-hour, AM or PM is indicated. The LCD indication returns to the stand-by mode after 30 sec. has passed with no operation. The time indication format (12-hour/24-hour) 12HR 12:00PM YMD 08-04-01 MON CLCK ZONE Time Date Date indication format (Y: Year, M: Month, D: Day) w Push [Clock] again to return to the stand-by mode. 15 D Time and date settings q Push [Clock] to indicate the current time and date on the LCD. 12HR 12:00PM YMD 08-04-01 MON CLCK ZONE w Push and hold [Clock] for 1 sec. to enter the time and date setting mode. The time indication format, 24HR or 12HR blinks. 12HR 12:00PM YMD 08-04-01 MON CLCK ZONE e Push [Clock] to select the desired item to be changed. r Push [CH Up] or [CH Down] to set the selected item. 12HR 03:00PM YMD 08-04-01 MON CLCK ZONE TX TX Low BATT1 BASIC OPERATION 3 LED indicator (Non-display type only) The LED indicator indicates some information as follows;
(Ref.; R=Red, G=Green, O=Orange) TX: Lights Red while transmitting a signal. R*
TX low BATT1: TX is performed at Low BATT1. TX low BATT2: Low BATT2 was detected during TX mode. R*
R*
t Push [Clock] to set. The next item blinks. TX Low BATT2 R*
R*
R*
R*
Fast/Slow scan: Blinks while Fast/Slow scan is activated. 12HR 03:00PM YMD 08-04-01 MON CLCK ZONE F/S Scan Busy Low BATT1 y Repeat steps e to t to set items. Low BATT2 u After setting, push and hold [Clock] for 1 sec. to program. i Push [Clock] to return to the stand-by mode. Return to the time and date setting mode. Inh & Blank CH G G RX: Turns Green while receiving a signal. G Low BATT1: You should charge the battery. (blinks slowly) G G Low BATT2: You must charge the battery. (blinks fast) G G G G CH err: Non-programmed channel is selected. R O R O R O R O R O R O R O R O
* Lights (or blinks) orange when the optional battery case is at-
tached. Call LED ON O Call LED Blink O O 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 16 4 BATTERY CHARGING Caution Misuse of Lithium-Ion batteries may result in the fol-
lowing hazards: smoke, fire, or the battery may rupture. Misuse can also cause damage to the battery or degra-
dation of battery performance. R DANGER! Use and charge only specified Icom battery packs with Icom radios or Icom chargers. Only Icom bat-
tery packs are tested and approved for use and charge with Icom radios or Icom chargers. Using third-party or coun-
terfeit battery packs or chargers may cause smoke, fire, or cause the battery to burst. D Battery caution R DANGER! DO NOT hammer or otherwise impact the bat-
tery. Do not use the battery if it has been severely impacted or dropped, or if the battery has been subjected to heavy pressure. Battery damage may not be visible on the outside of the case. Even if the surface of the battery does not show cracks or any other damage, the cells inside the battery may rupture or catch fire. 17 R DANGER! NEVER use or leave battery packs in areas with temperatures above +60C (+140F). High tempera-
ture buildup in the battery, such as could occur near fires or stoves, inside a sun heated car, or in direct sunlight may cause the battery to rupture or catch fire. Excessive tem-
peratures may also degrade battery performance or shorten battery life. R DANGER! DO NOT expose the battery to rain, snow, seawater, or any other liquids. Never charge or use a wet battery. If the battery gets wet, be sure to wipe it dry before using. R DANGER! NEVER incinerate used battery packs since internal battery gas may cause them to rupture, or may cause an explosion. R DANGER! NEVER solder the battery terminals or NEVER modify the battery pack. This may cause heat gen-
eration, and the battery may rupture, emit smoke or catch fire. R DANGER! Use the battery only with the transceiver for which it is specified. Never use a battery with any other equipment, or for any purpose that is not specified in this instruction manual. R DANGER! If fluid from inside the battery gets in your eyes, blindness can result. Rinse your eyes with clean water, without rubbing them, and see a doctor immediately. R WARNING! Immediately stop using the battery if it emits an abnormal odor, heats up, or is discolored or deformed. If any of these conditions occur, contact your Icom dealer or distributor. R WARNING! Immediately wash, using clean water, any part of the body that comes into contact with fluid from in-
side the battery. R WARNING! NEVER put the battery in a microwave oven, high-pressure container, or in an induction heating cooker. This could cause a fire, overheating, or cause the battery to rupture. CAUTION: Always use the battery within the specified tem-
perature range for the transceiver (30C to +60C; 22F to +140F) and the battery itself (20C to +60C; 4F to
+140F). Using the battery out of its specified temperature range will reduce the batterys performance and battery life. CAUTION: Shorter battery life could occur if the battery is left fully charged, completely discharged, or in an exces-
sive temperature environment (above +45C; +113F) for an extended period of time. If the battery must be left unused for a long time, it must be detached from the radio after dis-
charging. You may use the battery until the remaining ca-
pacity is about half, then keep it safely in a cool dry place with the temperature range as below;
20C to +45C (4F to +113F) (within a month) 20C to +35C (4F to +95F) 20C to +25C (4F to +77F)
(within three months)
(within a year) BATTERY CHARGING 4 D Charging caution R DANGER! NEVER charge the battery pack in areas with extremely high temperatures, such as near fires or stoves, inside a sun heated car, or in direct sunlight. In such en-
vironments, the safety/protection circuit in the battery will activate, causing the battery to stop charging. R WARNING! NEVER charge or leave the battery in the battery charger beyond the specified time for charging. If the battery is not completely charged by the specified time, stop charging and remove the battery from the battery char-
ger. Continuing to charge the battery beyond the specified time limit may cause a fire, overheating, or the battery may rupture. R WARNING! NEVER insert the transceiver (battery at-
tached to the transceiver) into the chargers if it is wet or soiled. This could corrode the battery charger terminals or damage the chargers. The chargers are not waterproof. CAUTION: NEVER charge the battery outside of the speci-
fied temperature range: 0C to +40C (+32F to +104F). Icom recommends charging the battery at +20C (+68F). The battery may heat up or rupture if charged out of the specified temperature range. Additionally, battery perfor-
mance or battery life may be reduced. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 4 BATTERY CHARGING Optional battery chargers D AD-110 installation The AD-110 charger adapter must be installed into the BC-
119N or BC-121N before battery charging. D Rapid charging with the BC-119N+AD-110 The optional BC-119N provides rapid charging of the Li-Ion battery pack. Charging period: Approx. 4 hours (with BP-254) q Attach the plugs from the BC-119N/BC-121N to the AD-
110 charger adapter. w Secure the AD-110 into the holder space of the BC-119N or BC-121N with the supplied screws. The following items are additionally required. AD-110 charger adapter (purchase separately) An AC adapter (may be supplied with BC-119N depending on version) or the DC power cable (OPC-515L/CP-23L). q AD-110 Plugs BATTERY PACK Turn power OFF TRANSCEIVER AC adapter
(Not supplied with some versions.) w Screws supplied with the charger adapter Sockets This illustration shows the BC-119N. 19 Optional OPC-515L
(for 13.8 V power source) or CP-23L
(for 12 V cigarette lighter socket) can be used instead of the AC adapter. AD-110 charger adapter is installed in BC-119N. BATTERY CHARGING 4 D Rapid charging with the BC-121N+AD-110 The optional BC-121N allows up to 6 battery packs to be charged simultaneously. Charging period: Approx. 4 hours
(with BP-254) IMPORTANT: Battery charging caution Ensure the guide tabs on the battery pack are correctly aligned with the guide rails inside the charger adapter.
(This illustration shows the BC-119N.) The following items are additionally required. Six AD-110 charger adapters (purchase separately) An AC adapter (BC-157S) or the DC power cable (OPC-656) BATTERY PACK Turn power OFF TRANSCEIVER AC adapter
(Purchased separately) AD-110 charger adapters are installed in each slot. Tabs MULTI-CHARGER Guide rails DC power cable (OPC-656)
(Connect with the DC power supply;
13.8 V/at least 7 A) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 20 5 BATTERY CASE Optional battery case (BP-237) The optional battery case uses 6 AA (LR6) size alkaline batteries. The battery case offers low output power. q Hook your finger under the latch, and open the cover in Fig.1 q BP-237 Latch the direction of the arrow (q). (Fig.1) w Then, install 6 AA (LR6) size alkaline batteries. (Fig.2) e Close the cover by fitting in the direction of the arrow (w) Install the alkaline batteries only. Be sure to observe the correct polarity. Do not pin the ribbon under the batteries. first, then check the latch is in place (e). (Fig.1) Be sure the gasket is set correctly, and do not protrude from the battery case. (Fig.3) CAUTION:
When installing batteries, make sure they are all the same brand, type and capacity. Also, do not mix new and old batteries together. Keep battery terminals clean. Its a good idea to clean bat-
tery terminals once a week. Never incinerate used battery cells since internal battery gas may cause them to rupture. Never expose a detached battery case to water. If the bat-
tery case gets wet, be sure to wipe it dry before using it. 21 w Fig.2 Fig.3 e Gasket Optional HM-184/H description Microphone Speaker Belt clip PTT SWITCH Push and hold to transmit;
release to receive. Turn the transceiver power OFF when at-
taching or detaching the microphone. NEVER immerse the connector in water. If the connector gets wet, be sure to dry it BEFORE attaching it to the transceiver. NOTE: The microphone is located as shown in the dia-
gram above. To maximize the readability of your transmit-
ted signal (voice), hold the microphone approx. 5 to 10 cm
(2 to 4 in.) from your mouth, and speak in a normal voice level. SPEAKER MICROPHONE 6 To attach Attach the connector of the speaker-microphone into the multi connector on the transceiver and tighten the screw with a coin or flat head screwdriver. Screw Coin CAUTION: Attach the multi connector properly, but do not overtighten. A loose connection will allow water intrusion into the connector; an over-
tightened connection will damage the connector pins in the transceiver. IMPORTANT: KEEP the connector cover attached to the transceiver when the speaker-microphone is not in use.
(p. 3) Water will not get into the transceiver even if the cover is not attached; however, the terminals (pins) will become rusty, or the transceiver will function abnormally if the con-
nector gets wet. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 22 7 OPTIONS D BATTERY PACKS Battery pack Voltage Capacity Battery life*3 BP-254*1 7.4 V 2900 mAh (min.) 3040 mAh (typ.) BP-237*2 Battery case for A6 AA (LR6) alkaline 9.5 hrs.
*4
*1 The BP-254 meets IPX7* requirements for waterproof protection. When it is connected, the transceiver corresponds to IPX7.
*2 The BP-237 meets IPX4* requirements for splash resistance. When it is connected, the transceiver corresponds to IPX4.
*3 When the power save function is turned ON, and the operating periods are calculated under the following conditions;
TX : RX : standby = 5 : 5 : 90
*4 Operating period depends on the alkaline cells used. D CHARGERS BC-119N desktop charger + AD-110 charger adapter
+ BC-145S ac adapter For rapid charging of battery pack. An AC adapter is sup-
plied with the charger depending on versions. Charging time: approx. 4 hours when BP-254 is attached. BC-121N multi-charger + AD-110 charger adapter
(6 pcs.) + BC-157S ac adapter For rapid charging of up to 6 battery packs (six AD-110s are required) simultaneously. An AC adapter should be pur-
chased separately. Charging time: approx. 4 hours when BP-254 is attached. 23 D CABLES CP-23L cigarette lighter cable Allows charging of the battery pack through a 12 V cigarette lighter socket. (For BC-119N) OPC-515L/OPC-656 dc power cables Allows charging of the battery pack using a 13.8 V power source instead of the AC adapter. OPC-515L : For BC-119N OPC-656
: For BC-121N OPC-1870/OPC-1871 zone copy cables OPC-1870 : Portable to portable zone copy cable. OPC-1871 : Portable to mobile zone copy cable. See the operating guide for details. D OPTIONAL UNITS UT-124R man down unit Provides a measure of safety when working in a hazardous environment, etc. UT-125 aes/des encryption unit UT-128 des encryption unit D ANTENNAS FA-S25V/S65V/S66V/S30U/S58U/S75U flexible antennas FA-S25V FA-S65V FA-S66V FA-S67VC/S76UC cut antenna FA-S67VC : 136174 MHz
: 136148 MHz
: 148160 MHz
: 160174 MHz
: 380430 MHz
: 430470 MHz
: 470520 MHz FA-S30U FA-S58U FA-S75U FA-S76UC : 380520 MHz D OTHER OPTIONS MB-115 belt clip Exclusive alligator-type belt clip. AD-118 acc adapter Allows you to connect an accessory which uses a HIROSE plug. See the instruction sheet of the AD-118 for details of the recommended accessories. CAUTION: The AD-118 does not have any waterproof protec-
tion. When it is connected, NEVER expose the adapter and the transceiver to rain, snow or any liquids. HM-184/HM-184H speaker-microphones Rugged type speaker-microphone. The HM-184/HM-184H meet IP67* requirements for waterproof protection. VS-1MC vox/ptt case + HS-94/HS-95/HS-97 headset VS-1MC : VOX/PTT switch box for hands-free operation, etc. HS-94 HS-95 HS-97 These items have IPX4* waterproof protection. When in use, the transceivers waterproof rating meets IPX4 when they are con-
nected.
: Ear-hook type
: Neck-arm type
: Throat microphone
* Once these items have been dropped, the IP rating cannot be guaranteed because of possible damage to these cases or the waterproof seal. Some options may not be available in some countries. Please ask your dealer for details. OPTIONS 7 D About VS-1MC vox/ptt case The VS-1MC is a VOX/PTT unit for Icom handheld transceiv-
ers, and allows you hands-free operation. An optional headset (HS-94, etc.) is required for operation. The VOX (Voice Operated Transmission) function starts transmission without pushing PTT switch when you speak into the microphone;
then, automatically returns to receive when you stop speaking. Features 14-pin Spring-plug type head SP/MIC plug is equipped Water resistant construction Durable construction Equipped with a PTT switch and revolving clip MIC/VOX gain adjusting pot VS-1MC PTT switch Water protection cover VOX/PTT select switch Continues to the next page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 24 7 OPTIONS D About VS-1MC vox/ptt case (Continued) VOX gain and delay adjustment q Attach the connector of the VS-1MC into the multi-connec-
tor on the transceiver and tighten the screw. Toggle the VOX/PTT select switch to [VOX]. w Enter user set mode. (p. 14) e Push [] several times to select the VOX Gain or VOX Delay items. Then, push [] or [] to set the desired level/
condition. r Push and hold [] again to exit the user set mode. Until turning power OFF, [], [] and [] is not activated as the assigned key function. These adjustments are for Simple/10-key types only. VOX Gain The VOX sensitivity level can be adjusted from OFF or 1 to 6
(more sensitive). VOX Delay The VOX delay time can be set from 0.5 to 3.0 sec. (0.5 sec. step) for a convenient interval before returning to receive. VOX DLY0.5 Push
[] or []
VOX DLY3.0 MON CLCK ZONE 0.5 sec (min.)
(default) MON CLCK ZONE 3.0 sec (max.) If your voice is detected, TX appears on the LCD as shown below during the VOX gain or VOX delay adjust-
ment. (The transmission is not performed.) Appear VOX OFF Push
[] or []
VOX GAIN 3 MON CLCK ZONE VOX function is OFF MON CLCK ZONE VOX gain level 3
(default) VOX GAIN 3TX VOX DLY3.0TX MON CLCK ZONE MON CLCK ZONE VOX gain adjustment VOX delay adjustment NOTE: MIC/VOX gain can be adjusted via the Adjusting pot using a thin screw driver. 25 SAFETY TRAINING INFORMATION 8 Your Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as Occupational Use Only, meaning it must be used only during the course of employment by indi-
viduals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the General Population in an uncontrolled environment. W ARNING This radio has been tested and complies with the FCC RF expo-
sure limits for Occupational Use Only. In addition, your Icom radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. American National Standards Institute (C95.1-1992), IEEE Stan-
dard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. American National Standards Institute (C95.3-1992), IEEE Rec-
ommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields RF and Microwave. The following accessories are authorized for use with this product. Use of accessories other than those specified may result in RF ex-
posure levels exceeding the FCC requirements for wireless RF expo-
sure.; Belt Clip (MB-115), Rechargeable Li-Ion Battery Pack (BP-254), Alkaline Battery Case (BP-237), Speaker-microphones (HM-184/
HM-184H), VOX/PTT case (VS-1MC) and ACC adapter (AD-118). To ensure that your expose to RF electromagnetic energy is within the FCC allowable limits for oc-
cupational use, always adhere to the following guidelines:
CAU TION DO NOT operate the radio without a proper antenna attached, as this may damaged the radio and may also exceed FCC RF expo-
sure limits. A proper antenna is the antenna supplied with this radio by Icom Inc. or antenna specifically authorized by Icom Inc. for use with this radio. DO NOT transmit for more than 50% of total radio use time (50%
duty cycle). 50% duty cycle is also applicable to the VOX and/or PSTN (Public Switched Telephone Network) mode. Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the TX indicator lights red. You can cause the radio to transmit by pressing the PTT switch. ALWAYS keep the antenna at least 2.5 cm (1 in.) away from the body when transmitting and only use the Icom belt-clips listed on p. 24 when attaching the radio to your belt, etc., to ensure FCC RF expo-
sure compliance requirements are not exceeded. To provide the re-
cipients of your transmission the best sound quality, hold the antenna at least 5 cm (2 in.) from your mouth, and slightly off to one side. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, your Icom radio generates RF energy that could possible cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are ex-
posed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 26 A-6662D-1US-u Printed in Japan 20082013 Icom Inc. Printed on recycled paper with soy ink. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
1 2 3 | User Manual | Users Manual | 3.10 MiB | June 06 2008 / September 06 2008 |
!IC-F70_F80.qxd 04.10.26 5:41 PM Page a (1,1)
!IC-F70_F80.qxd 04.10.26 5:41 PM Page a (1,1)
!IC-F70_F80.qxd 04.10.26 5:41 PM Page a (1,1) INSTRUCTION MANUAL VHF TRANSCEIVER VHF TRANSCEIVER VHF TRANSCEIVER VHF TRANSCEIVER IC-F9011B/S/T This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
!IC-F70_F80.qxd 04.11.9 0:01 PM Page i (1,1) IMPORTANT READ ALL INSTRUCTIONS carefully and com-
pletely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This instruction manual contains important operating instructions for the IC-F9011B/F9011S/F9011T VHF TRANSCEIVER. EXPLICIT DEFINITIONS WORD RWARNING CAUTION NOTE DEFINITION Personal injury, re hazard or electric shock may occur. Equipment damage may occur. If disregarded, inconvenience only. No risk of personal injury, re or electric shock. ABOUT APCO PROJECT 25 This device made under license under one or more of the fol-
lowing US patents: #4,590,473, #4,636,791, #5,148,482,
#5,185,796, #5,271,017, #5,377,229. The IMBE voice coding Technology embodied in this prod-
uct is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to decom-
pile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,
#5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656,
#5,517,511, #5,491,772, #5,247,579, #5,226,084, #5,195,166. Icom, Icom Inc. and the logo are registered trademarks of Icom Incorporated (Japan) in the United states, the United Kingdom, Germany, France, Spain, Russia and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders. i FOR CLASS B UNINTENTIONAL RADIATORS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the re-
ceiver is connected. Consult the dealer or an experienced radio/TV technician for help. A-6635H-2US-q
!IC-F70_F80.qxd 04.11.9 0:01 PM Page ii (1,1) PRECAUTION R CAUTION! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 2 to 4 in. (5 to 10 cm) away from the lips and the transceiver is vertical. R CAUTION! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. R CAUTION! NEVER short the terminals of the bat-
tery pack. DO NOT push PTT when not actually desiring to transmit. AVOID using or placing the transceiver in direct sunlight or in areas with temperatures below +22F (30C) or above
+140F (+60C). The basic operations, transmission and reception of the trans-
ceiver are guaranteed within the specied operating temper-
ature range. However, the LCD display may not be operate correctly, or show an indication in the case of long hours of operation, or after being placed in extremely cold areas. DO NOT modify the transceiver for any reason. KEEP the transceiver from the heavy rain, and Never immerse it in the water. The transceiver construction is water resistant, not waterproof. The use of non-Icom battery packs/chargers may impair transceiver performance and invalidate the warranty. For U.S.A. only CAUTION: Changes or modications to this transceiver, not expressly approved by Icom Inc., could void your authority to operate this transceiver under FCC regulations. ii
!IC-F70_F80.qxd 04.11.9 0:01 PM Page iii (1,1) TABLE OF CONTENTS IMPORTANT .................................................................................... i EXPLICIT DEFINITIONS ................................................................. i ABOUT APCO PROJECT 25 ........................................................... i PRECAUTION ................................................................................. ii TABLE OF CONTENTS .................................................................. iii 1 ACCESSORIES ..................................................................... 13 I Supplied accessories ............................................................. 1 I Accessory attachments .......................................................... 1 2 PANEL DESCRIPTION ......................................................... 47 I Front panel ............................................................................. 4 I Function display ..................................................................... 6 I Programmable function keys .................................................. 7 3 BASIC OPERATION .......................................................... 1217 I Turning power ON ................................................................ 12 I Channel selection ................................................................. 12 I Call procedure ...................................................................... 13 I Receiving and transmitting ................................................... 13 I User set mode ...................................................................... 16 I Scrambler function ............................................................... 17 4 BATTERY CHARGING ...................................................... 1820 I Battery charging ................................................................... 18 I Battery caution ..................................................................... 18 I Optional battery chargers ..................................................... 19 5 OPTIONAL BATTERY CASE .................................................. 21 I Optional battery case ........................................................... 21 6 SPEAKER-MICROPHONE ................................................... 22 I Optional HM-184 description ................................................ 22 I Attachmect ............................................................................ 22 7 OPTIONS ............................................................................ 23-24 8 SAFETY TRAINING INFORMATION .................................2526 iii
!IC-F70_F80.qxd 04.11.9 0:01 PM Page 1 (1,1) ACCESSORIES 1 I Supplied accessories The following accessories are supplied:
Qty. q Flexible antenna 1 w Battery pack 1 e Belt clip 1 r Jack cover (with screws) 1 set q w e I Accessory attachments D Flexible antenna Connect the supplied exible anten-
na to the antenna connector. CAUTION!
NEVER HOLD by the antenna when carrying the transceiver. Transmitting without an antenna may damage the transceiver. r 1 1
!IC-F70_F80.qxd 04.11.9 0:01 PM Page 2 (1,1) 1 ACCESSORIES Battery pack To attach the battery pack:
Slide the battery pack in the direction of the arrow (q), then lock it with the battery release button. Slide the battery pack until the battery release button makes a click sound. To release the battery pack:
Push the battery release button in the direction of the arrow
(w) as shown below. The battery pack is then released. NEVER release or attach the battery pack when the trans-
ceiver is wet or soiled. This may result water or dust get-
ting into the transceiver/battery pack and may result in the transceiver being damaged. q w 2 D Belt clip To attach the belt clip:
q Release the battery pack if it is attached. w Slide the belt clip in the direction of the arrow until the belt clip is locked and makes a click sound. To detach the belt clip:
q Release the battery pack if it is attached. w Pinch the clip (q), and slide the belt clip in the direction of the arrow (w). w q
!IC-F70_F80.qxd 04.11.9 0:01 PM Page 3 (1,1) Jack cover Attach the jack cover when the optional speaker-microphone is not used. To attach the jack cover:
q Insert the jack cover into To detach the jack cover:
e Unscrew the screw with a the [SP MIC] connector. phillips screwdriver. w Tighten the screw. r Detach the jack cover for the speaker-microphone connection. q w r e ACCESSORIES 1 1 3
!IC-F70_F80.qxd 04.11.9 0:01 PM Page 4 (1,1)
!IC-F70_F80.qxd 04.11.9 0:01 PM Page 4 (1,1)
!IC-F70_F80.qxd 04.11.9 0:01 PM Page 4 (1,1)
!IC-F70_F80.qxd 04.11.9 0:01 PM Page 4 (1,1) 2 PANEL DESCRIPTION 2 PANEL DESCRIPTION 2 PANEL DESCRIPTION 2 PANEL DESCRIPTION
Front panel
Front panel
Front panel
Front panel B B B B B B B B B B B B B B B B A A A A A A A A A A A A A A A A M J L K C C C C C C C C C C C C C C C C D D D D D D D D D D D D D D D D E E E E E E E E E E E E E E E E Speaker Speaker Speaker Speaker Speaker Speaker Speaker Speaker Speaker Speaker Speaker Speaker Speaker Speaker Speaker Speaker F F F F F F F F F F F F F F F F G G G G G G G G G G G G G G G G H H H H H H H H H H H H H H H H I I I I I I I I I I I I I I I I A .VOLUME CONTROL [VOL]
A .VOLUME CONTROL [VOL]
A .VOLUME CONTROL [VOL]
A .VOLUME CONTROL [VOL]
Rotate to turn the power ON/OFF and adjusts the audio Rotate to turn the power ON/OFF and adjusts the audio Rotate to turn the power ON/OFF and adjusts the audio Rotate to turn the power ON/OFF and adjusts the audio level. level. level. level. B .ROTARY SELECTOR B .ROTARY SELECTOR B .ROTARY SELECTOR B .ROTARY SELECTOR Rotate to select the pre-programmed memory channels or Rotate to select the pre-programmed memory channels or Rotate to select the pre-programmed memory channels or Rotate to select the pre-programmed memory channels or the operating bank. the operating bank. the operating bank. the operating bank.
(Depending on the pre-setting)
(Depending on the pre-setting)
(Depending on the pre-setting)
(Depending on the pre-setting) C .ANTENNA CONNECTOR C .ANTENNA CONNECTOR C .ANTENNA CONNECTOR C .ANTENNA CONNECTOR Connects the supplied antenna. Connects the supplied antenna. Connects the supplied antenna. Connects the supplied antenna. 4 4 4 4 D .EMERGENCY SWITCH D .EMERGENCY SWITCH D .EMERGENCY SWITCH D .EMERGENCY SWITCH Push and hold for a specied period to transmit an emer-
Push and hold for a specied period to transmit an emer-
Push and hold for a specied period to transmit an emer-
Push and hold for a specied period to transmit an emer-
gency call. gency call. gency call. gency call.
*Desired function can be programmed by your dealer. (p. 7)
*Desired function can be programmed by your dealer. (p. 7)
*Desired function can be programmed by your dealer. (p. 7)
*Desired function can be programmed by your dealer. (p. 7) E .BUSY/TRANSMIT INDICATOR E .BUSY/TRANSMIT INDICATOR E .BUSY/TRANSMIT INDICATOR E .BUSY/TRANSMIT INDICATOR Lights green while receiving a signal, or when the Lights green while receiving a signal, or when the Lights green while receiving a signal, or when the Lights green while receiving a signal, or when the squelch is open. squelch is open. squelch is open. squelch is open. Lights red while transmitting. Lights red while transmitting. Lights red while transmitting. Lights red while transmitting. F .[SP/MIC] JACK F .[SP/MIC] JACK F .[SP/MIC] JACK F .[SP/MIC] JACK Connect the optional speaker-microphone. Connect the optional speaker-microphone. Connect the optional speaker-microphone. Connect the optional speaker-microphone.
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover
[SP/MIC] jack cover NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack NOTE: Attach the [SP/MIC] jack cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
cover when the optional speaker-
microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used. microphone is not used.
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details)
(See p. 3 for details) G .FUNCTION DISPLAY (p. 6) G .FUNCTION DISPLAY (p. 6) G .FUNCTION DISPLAY (p. 6) G .FUNCTION DISPLAY (p. 6) Displays a variety of information, such as an operating Displays a variety of information, such as an operating Displays a variety of information, such as an operating Displays a variety of information, such as an operating channel number/name, 5-tone code, DTMF numbers and channel number/name, 5-tone code, DTMF numbers and channel number/name, 5-tone code, DTMF numbers and channel number/name, 5-tone code, DTMF numbers and audible condition, etc. audible condition, etc. audible condition, etc. audible condition, etc. H .DEALER-PROGRAMMABLE KEYS H .DEALER-PROGRAMMABLE KEYS H .DEALER-PROGRAMMABLE KEYS H .DEALER-PROGRAMMABLE KEYS Desired functions can be programmed independently by Desired functions can be programmed independently by Desired functions can be programmed independently by Desired functions can be programmed independently by your dealer. (p. 7) your dealer. (p. 7) your dealer. (p. 7) your dealer. (p. 7)
!IC-F70_F80.qxd 04.11.9 0:01 PM Page 5 (1,1)
!IC-F70_F80.qxd 04.11.9 0:01 PM Page 5 (1,1)
!IC-F70_F80.qxd 04.11.9 0:01 PM Page 5 (1,1)
!IC-F70_F80.qxd 04.11.9 0:01 PM Page 5 (1,1) I . 10-KEYPAD (IC-F9011T only ) I . 10-KEYPAD (IC-F9011T only ) I . 10-KEYPAD (IC-F9011T only ) I . 10-KEYPAD (IC-F9011T only ) The keypad allows you to enter digits to:
The keypad allows you to enter digits to:
The keypad allows you to enter digits to:
The keypad allows you to enter digits to:
Select memory channels, tone channels and DTMF codes Select memory channels, tone channels and DTMF codes Select memory channels, tone channels and DTMF codes Select memory channels, tone channels and DTMF codes
(when in the DTMF code channel selection mode)
(when in the DTMF code channel selection mode)
(when in the DTMF code channel selection mode)
(when in the DTMF code channel selection mode) Set TX codes Set TX codes Set TX codes Set TX codes Input text message for SDM operation Input text message for SDM operation Input text message for SDM operation Input text message for SDM operation Start up with a password Start up with a password Start up with a password Start up with a password Input the Individual ID code for digital operation. Input the Individual ID code for digital operation. Input the Individual ID code for digital operation. Input the Individual ID code for digital operation. J . MONITOR SWITCH J . MONITOR SWITCH J . MONITOR SWITCH J . MONITOR SWITCH Mute and release the CTCSS (DTCS) or 2-tone squelch Mute and release the CTCSS (DTCS) or 2-tone squelch Mute and release the CTCSS (DTCS) or 2-tone squelch Mute and release the CTCSS (DTCS) or 2-tone squelch mute. Open any squelch/deactivate any mute while mute. Open any squelch/deactivate any mute while mute. Open any squelch/deactivate any mute while mute. Open any squelch/deactivate any mute while pushing this key. (LMR operation only) pushing this key. (LMR operation only) pushing this key. (LMR operation only) pushing this key. (LMR operation only) Activates one of (or two of) the following functions on Activates one of (or two of) the following functions on Activates one of (or two of) the following functions on Activates one of (or two of) the following functions on each channel independently. each channel independently. each channel independently. each channel independently. NOTE: The unmute condition (audible conditions) NOTE: The unmute condition (audible conditions) NOTE: The unmute condition (audible conditions) NOTE: The unmute condition (audible conditions) may automatically return to the mute condition may automatically return to the mute condition may automatically return to the mute condition may automatically return to the mute condition
(inaudible condition) after a specied period.
(inaudible condition) after a specied period.
(inaudible condition) after a specied period.
(inaudible condition) after a specied period.
*Desired function can be programmed by your dealer. (p. 7)
*Desired function can be programmed by your dealer. (p. 7)
*Desired function can be programmed by your dealer. (p. 7)
*Desired function can be programmed by your dealer. (p. 7) PANEL DESCRIPTION PANEL DESCRIPTION PANEL DESCRIPTION PANEL DESCRIPTION 2 2 2 2 K. PTT SWITCH [PTT]
K. PTT SWITCH [PTT]
K. PTT SWITCH [PTT]
K. PTT SWITCH [PTT]
Push and hold to transmit; release to receive.
Push and hold to transmit; release to receive.
Push and hold to transmit; release to receive.
Push and hold to transmit; release to receive.
Push to transmit the call during MSK operation, depend-
Push to transmit the call during MSK operation, depend-
Push to transmit the call during MSK operation, depend-
Push to transmit the call during MSK operation, depend-
2 2 2 2 ing on the setting. ing on the setting. ing on the setting. ing on the setting. L . UP/DOWN SWITCHES L . UP/DOWN SWITCHES L . UP/DOWN SWITCHES L . UP/DOWN SWITCHES
Push to select an operating channel.
Push to select an operating channel.
Push to select an operating channel.
Push to select an operating channel.
Push to select a TX code channel after pushing
Push to select a TX code channel after pushing
Push to select a TX code channel after pushing
Push to select a TX code channel after pushing
[TX CODE CH SELECT].
[TX CODE CH SELECT].
[TX CODE CH SELECT].
[TX CODE CH SELECT].
Push to select a DTMF channel after pushing [DTMF].
Push to select a DTMF channel after pushing [DTMF].
Push to select a DTMF channel after pushing [DTMF].
Push to select a DTMF channel after pushing [DTMF].
Push to select a scan group after pushing and holding
Push to select a scan group after pushing and holding
Push to select a scan group after pushing and holding
Push to select a scan group after pushing and holding
[SCAN].
[SCAN].
[SCAN].
[SCAN].
Push to select a BIIS code, status number or SDM after
Push to select a BIIS code, status number or SDM after
Push to select a BIIS code, status number or SDM after
Push to select a BIIS code, status number or SDM after pushing [DIGITAL]. pushing [DIGITAL]. pushing [DIGITAL]. pushing [DIGITAL].
*Desired functions can be programmed independently by your
*Desired functions can be programmed independently by your
*Desired functions can be programmed independently by your
*Desired functions can be programmed independently by your dealer. (p. 7) dealer. (p. 7) dealer. (p. 7) dealer. (p. 7) M. DEALER-PROGRAMMABLE SWITCH [2-Position SWITCH]
[Concentric SWITCH]
Desired functions can be programmed independently by your dealer. (p. 7) 5 5 5 5
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 6 (1,1) 2 PANEL DESCRIPTION I Function display q rew t oiuy X TXC SET
!0
!1 q SIGNAL STRENGTH INDICATOR Indicates relative signal strength level. w LOW POWER INDICATOR Appears when low output power is selected. e AUDIBLE INDICATOR Appears when the channel is in the audible (unmute) condition. Appears when the specified 2/5-tone/BIIS code is received. r COMPANDER INDICATOR Appears when the compander function is activated. 6 t SCRAMBLER INDICATOR Appears when the voice scrambler function is activated. y BELL INDICATOR Appears/blinks when the specific 2/5-tone/BIIS code is received, according to the pre-programming. u CALL CODE MEMORY INDICATOR Appears when the call code memory is selected. i SCROLL INDICATOR Appears when a received SDM including more than 12 characters is displayed. o BATTERY INDICATOR Appears or blinks when the battery power decreases to a specied level.
!0 ALPHANUMERIC DISPLAY Displays an operating channel number, channel name, Set mode contents, DTMF code, etc. The indication mode can be selected from 1 line or 2 lines. Ask your dealer for details. In this instruction manual, the LCD illustration is described using the 2 lines indication mode.
!1 KEY INDICATOR Indicate the programmed function of the front panel keys
([P1], [P2], [P3]).
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 7 (1,1) PANEL DESCRIPTION 2 I Programmable function keys The following functions can be assigned to [DIAL]*, [UP],
[DOWN], [P1], [P2], [P3]
[<],[>] programmable function keys. Consult your Icom dealer or system operator for details con-
cerning your transceivers programming. If the programmable function names are bracketed in the fol-
lowing explanations, the specic key is used to activate the function depends on the programming. CH UP AND DOWN KEYS Push to select an operating channel. Push to select a transmit code channel after pushing [TX Code CH Select]. Push to select a DTMF channel after pushing [DTMF Autodial]. What is zone? The desired channels are assigned into a zone according to the intended use. For example, Staff A and Staff B are assigned into a Business zone, and John and Cindy are assigned into a Private zone. SCAN A KEY This keys operation depends on the Power ON Scan setting. When the power ON scan function is turned OFF;
Push to start and cancel scanning operation. In case of transmission during scan, cancels scanning. When the power ON scan function is turned ON;
Push to pause scanning. Scanning resumes after a speci-
ed time period has passed. In case of transmission during scan, pauses scanning. Scanning resumes after a specied time period has passed after the transmission is nished. Push to select a scan group after pushing and holding Push and hold this key for 1 sec. to indicate the scan group,
[Scan A Start/Stop]/[Scan B Start/Stop]. then select the desired group using [CH Up]/[CH Down]. Push to select an Individual ID code or Talkgroup ID code after pushing [Individual] or [Talkgroup]. ZONE SELECT KEY Push this key, then select the desired zone using [CH Up]/
[CH Down]. SCAN B KEY Push to start and cancel scanning operation. In case of transmission during scan, pauses scanning. Scanning resumes after a specied time period has passed after the transmission is nished. Push and hold this key for 1 sec. to indicate the scan group, then select the desired group using [CH Up]/
[CH Down]. 2 7
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 8 (1,1) 2 PANEL DESCRIPTION SCAN TAG KEY Push to add or delete the selected channel to/from the scan group. PRIORITY CHANNEL KEYS Push to select Priority A or Priority B channel. Push and hold [Prio A (Rewrite)] to rewrite the Prio A chan-
nel. MR-CH 1/2/3/4 KEYS Push to select an operating channel directly. MONITOR KEY Mute and release the CTCSS (DTCS) or 2-tone squelch mute. Open any squelch/deactivate any mute while push-
ing this key. (LMR operation only) LOCK KEY Push and hold to electronically lock all programmable keys except the following:
[Call] (incl. Call A and Call B), [Moni(Audi)] and [Emergency]. OUTPUT POWER SELECTION KEY Push to select the transmit output power temporarily or per-
manently, depending on the pre-setting. Ask your dealer for the output power level for each selection. C.TONE CHANNEL ENTER KEY Push to select the continuous tone channel using [CH Up]/
[CH Down] to change the tone frequency/code setting. The selected channel remains set as the continuous tone chan-
nel until another channel is designated as such. TALK AROUND KEY Turn the talk around function ON and OFF. The talk around function equalizes the transmit frequency to the receive frequency for transceiver-to-transceiver communication. WIDE/NARROW KEY Push to toggle the IF bandwidth between wide and narrow. LIGHT KEY Push to turn the transceivers backlight ON temporarily when the backlight function is turned OFF in user set mode. 8
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 9 (1,1) DTMF AUTODIAL KEY Push to enter the DTMF channel selection mode. Then select the desired DTMF channel using [CH Up]/[CH Down]. After selecting the desired DTMF channel, push this key to transmit the DTMF code. SURVEILLANCE KEY Push to turn the surveillance function ON or OFF. When this function is turned ON, the beep is not emitted and the LCD backlight does not light when a signal is received or a key is pushed, etc. 2 PANEL DESCRIPTION 2 DTMF RE-DIAL KEY Push to transmit the last-transmitted DTMF code. CALL KEYS Push to transmit a 2-tone ID code. Call transmission is necessary before calling another station depending on your signalling system.
[Call A] and/or [Call B] may be available when your system employs selective Individual/Group calls. Ask your dealer which call is assigned to each key. EMERGENCY KEYS Push and hold for a specied period to transmit an emer-
gency call. When [Emergency Single (Silent)] or [Emergency Repeat
(Silent)] is pushed, an emergency call is transmitted without a beep emission and LCD indication change. If you want to cancel the emergency call, push (or push and hold) the key again before transmitting the call. The emergency call is transmitted one time only or repeatedly until receiving a control code depending on the pre-setting. TX CODE CHANNEL SELECT KEY Push to enter the ID code channel selection mode directly. Then set the desired channel using [CH Up]/[CH Down].
(p. 14) TX CODE CHANNEL UP/DOWN KEYS Push to select a TX code channel directly. 9
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 10 (1,1) 2 PANEL DESCRIPTION VOICE SCRAMBLER FUNCTION Push to toggle the voice scrambler function ON and OFF. COMPANDER KEY Push to toggle the compander function ON and OFF. The compander function reduces noise components from the transmitted audio to provide clear communication. USER SET MODE KEY Push and hold to enter user set mode. During user set mode, push this key to select an item, and change the value or condition using push [CH Up]/[CH Down]. Push and hold this key again to exit user set mode. User set mode is also available via the Power ON function. Refer to p. 16 also. OPT OUT KEYS Push to control the output signal level from the optional unit connector. 10 TONE/NAC CH SELECT KEY While in the analog mode operation, push to select the continuous tone channel using [CH Up] or [CH Down] to change the tone frequency/code setting. While in the digital mode operation, push to select the NAC channel using [CH Up] or [CH Down] to change the NAC code setting. While in the mixed (digital and analog) mode operation, push to select the continuous tone channel using [CH Up]
or [CH Down] to change the tone frequency/code setting. Then push this key to enter the setting. After that, the NAC channel selection screen appears. Select the NAC chan-
nel using [CH Up] or [CH Down] to change the NAC code setting. Then push this key to enter the setting.
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 11 (1,1) D For Digital mode operation only INDIVIDUAL KEY Push to enter the individual ID code selection mode directly. Then select the desired individual ID code using [CH Up]/
[CH Down]. (p. 15) Push to stop the beep emission when receiving a matched individual ID code. TALKGROUP KEY Push to enter the talkgroup ID code selection mode directly. Then select the desired talkgroup ID code using [CH Up]/
[CH Down]. (p. 15) Push to stop the beep emission when receiving a matched talkgroup ID code. PANEL DESCRIPTION 2 2 11
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 12 (1,1)
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 12 (1,1)
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 12 (1,1)
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 12 (1,1) 3 BASIC OPERATION 3 BASIC OPERATION 3 BASIC OPERATION 3 BASIC OPERATION
Turning power ON
Turning power ON
Turning power ON
Turning power ON
Rotate [VOL] to turn the power ON.
Rotate [VOL] to turn the power ON.
Rotate [VOL] to turn the power ON.
Rotate [VOL] to turn the power ON. If the transceiver is programmed for a start up password, If the transceiver is programmed for a start up password, If the transceiver is programmed for a start up password, If the transceiver is programmed for a start up password, input the digit codes as directed by your dealer. input the digit codes as directed by your dealer. input the digit codes as directed by your dealer. input the digit codes as directed by your dealer. 10-keypad* can be used for password input. 10-keypad* can be used for password input. 10-keypad* can be used for password input. 10-keypad* can be used for password input.
*IC-F9011T only:
*IC-F9011T only:
*IC-F9011T only:
*IC-F9011T only:
The keys as below can be used for password input:
The keys as below can be used for password input:
The keys as below can be used for password input:
The keys as below can be used for password input:
The transceiver detects numbers in the same block as identical. The transceiver detects numbers in the same block as identical. The transceiver detects numbers in the same block as identical. The transceiver detects numbers in the same block as identical. Therefore 01234 and 56789 are the same. Therefore 01234 and 56789 are the same. Therefore 01234 and 56789 are the same. Therefore 01234 and 56789 are the same.
[<]/[>]/[P1]/
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
[P2]/[P3]
KEY KEY KEY KEY KEY KEY KEY KEY KEY KEY KEY KEY KEY KEY KEY KEY NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER NUMBER 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9
When the PASSWORD indication does not clear after
When the PASSWORD indication does not clear after
When the PASSWORD indication does not clear after
When the PASSWORD indication does not clear after inputting 6 digits, the input code number may be incorrect. inputting 6 digits, the input code number may be incorrect. inputting 6 digits, the input code number may be incorrect. inputting 6 digits, the input code number may be incorrect. Turn the power off and start over in this case. Turn the power off and start over in this case. Turn the power off and start over in this case. Turn the power off and start over in this case.
Channel selection
Channel selection
Channel selection
Channel selection Several types of channel selections are available. Methods Several types of channel selections are available. Methods Several types of channel selections are available. Methods Several types of channel selections are available. Methods may differ according to your system set up. may differ according to your system set up. may differ according to your system set up. may differ according to your system set up. NON-ZONE TYPE:
NON-ZONE TYPE:
NON-ZONE TYPE:
NON-ZONE TYPE:
Push [CH Up] or [CH Down], or rotate [ROTARY SELECTOR]*
Push [CH Up] or [CH Down], or rotate [ROTARY SELECTOR]*
Push [CH Up] or [CH Down], or rotate [ROTARY SELECTOR]*
Push [CH Up] or [CH Down], or rotate [ROTARY SELECTOR]*
to select the desired operating channel, in sequence; or, push to select the desired operating channel, in sequence; or, push to select the desired operating channel, in sequence; or, push to select the desired operating channel, in sequence; or, push one of [MR-CH 1] to [MR-CH 4] keys to select a channel one of [MR-CH 1] to [MR-CH 4] keys to select a channel one of [MR-CH 1] to [MR-CH 4] keys to select a channel one of [MR-CH 1] to [MR-CH 4] keys to select a channel directly. directly. directly. directly. Up to 16 pre-programmed channels can be selected via [ROTARY Up to 16 pre-programmed channels can be selected via [ROTARY Up to 16 pre-programmed channels can be selected via [ROTARY Up to 16 pre-programmed channels can be selected via [ROTARY SELECTOR]. SELECTOR]. SELECTOR]. SELECTOR]. ZONE TYPE:
ZONE TYPE:
ZONE TYPE:
ZONE TYPE:
Push [Zone] then push [CH Up] or [CH Down] or rotate Push [Zone] then push [CH Up] or [CH Down] or rotate Push [Zone] then push [CH Up] or [CH Down] or rotate Push [Zone] then push [CH Up] or [CH Down] or rotate
[ROTARY SELECTOR]* to select the desired zone.
[ROTARY SELECTOR]* to select the desired zone.
[ROTARY SELECTOR]* to select the desired zone.
[ROTARY SELECTOR]* to select the desired zone. AUTOMATIC SCAN TYPE:
AUTOMATIC SCAN TYPE:
AUTOMATIC SCAN TYPE:
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning Channel setting is not necessary for this type. When turning Channel setting is not necessary for this type. When turning Channel setting is not necessary for this type. When turning power ON, the transceiver automatically starts scanning. power ON, the transceiver automatically starts scanning. power ON, the transceiver automatically starts scanning. power ON, the transceiver automatically starts scanning. Scanning stops when receiving a call. Scanning stops when receiving a call. Scanning stops when receiving a call. Scanning stops when receiving a call.
*Depending on the pre-setting.
*Depending on the pre-setting.
*Depending on the pre-setting.
*Depending on the pre-setting. 12 12 12 12
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 13 (1,1) I Call procedure When your system employs tone signaling (excluding CTCSS and DTCS), the call procedure may be necessary prior to voice transmission. The tone signalling employed may be a selec-
tive calling system which allows you to call specic station(s) only and prevent unwanted stations from contacting you. q Select the desired TX code channel, 2-tone code, Individual ID code* or Talkgroup ID code* according to your System Operators instructions. This may not be necessary depending on programming. Refer to pgs. 1113 for selection.
*Digital mode operation only. w Push the call key (assigned to one of the dealer program-
mable keys; except for the Digital mode operation) or [PTT]. e After transmitting, the remainder of your communication can be carried out in the normal fashion. Selective calling Non-selective calling BASIC OPERATION 3 I Receiving and transmitting Receiving:
q Rotate [VOL] to turn the power ON. w Push [CH Up] or [CH Down], or rotate [ROTARY SELEC-
TOR]* to select a channel in sequence.
*Depending on the pre-setting. e When receiving a call, adjust the audio output level to a comfortable listening level. Transmitting:
Wait for the channel to become clear to avoid interference. q Push [CALL] when initiating a call from your side. Coded audio may be heard from the transceiver, then appears. This operation may not be necessary depending on your signal-
ing system. Ask your dealer for details. w While pushing and holding [PTT], speak into the micro-
phone at your normal voice level. e Release [PTT] to return to receive. IMPORTANT: To maximize the readability of your signal;
1. Pause briey after pushing [PTT]. 2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, then speak into the microphone at a normal voice level. 3 13
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 14 (1,1) 3 BASIC OPERATION D Transmitting notes Transmit inhibit function The transceiver has several inhibit functions which restrict transmission under the following conditions:
- The channel is in mute condition (Inaudible condition;
does not appear.)
- The channel is busy.
- Un-matched (or matched) CTCSS is received.
(Depending on the pre-setting.)
- Un-matched (or matched) NAC is received.*
(Depending on the pre-setting.)
- Un-matched (or matched) Individual ID or Talkgroup ID is received.*
- The selected channel is a receive only channel.
*Digital mode operation only. Time-out timer After continuous transmission for the pre-programmed time period, the time-out timer is activated, causing the transceiv-
er to stop transmitting. Penalty timer Once the time-out timer is activated, transmission is further inhibited for a period determined by the penalty timer. D TX code channel selection If the transceiver has [TX Code CH Select] assigned to it, the indication can be toggled between the operating channel number (or name) and TX code channel number (or name). When the TX code channel number (or name) is displayed,
[CH Up]or [CH Down] selects the TX code channel. USING [TX CODE CH SELECT] KEY:
q Push [TX Code CH Select]a TX code channel number
(or name) appears. w Push [CH Up] or [CH Down] to select the desired TX code channel. e Push [Call] (or [PTT] during MSK operation) to transmit the selected TX code. USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:
If the transceiver has a [TX Code CH Up] or [TX Code CH Down] key assignment, the programmed TX code channel can be selected directly when pushed. 14
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 16 (1,1) 3 BASIC OPERATION D Individual ID code selection
(Digital mode operation only) D Talkgroup ID code selection
(Digital mode operation only) If the transceiver has [Individual] assigned to it, the indication can be toggled between the operating channel number (or name) and Individual ID code (or name). When the Individual ID code (or name) is displayed, [CH Up] or [CH Down] selects the desired Individual ID code. If the transceiver has [Talkgroup] assigned to it, the indication can be toggled between the operating channel number (or name) and Talkgroup ID code (or name). When the Talkgroup ID code (or name) is displayed, [CH Up] or [CH Down] selects the desired Talkgroup ID code. q Push [Individual]an Individual ID code (or name) q Push [Talkgroup]a Talkgroup ID code (or name) appears. appears. w Push [CH Up] or [CH Down]
to select the desired w Push [CH Up] or [CH Down]
to select the desired Individual ID code. e Push [PTT] to transmit the selected Individual ID code. r Push [Individual]cancels the selected Individual ID code
(return to the pre-set Talkgroup ID code in the channel.) Talkgroup ID code. e Push [PTT] to transmit the selected Talkgroup ID code. r Change the channelcancels the selected Talkgroup ID code (return to the pre-set Talkgroup ID code in the chan-
nel.) D DTMF transmission If the transceiver has [DTMF Autodial] assigned to it, the automatic DTMF transmission function is available. Up to 8 DTMF channels are available. TO SELECT A TX CODE:
q Push [DTMF Autodial]a DTMF channel appears. w Push [CH Up] or [CH Down] to select the desired DTMF channel. e Push [DTMF Autodial] to transmit the DTMF code in the selected DTMF channel. 15
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 17 (1,1)
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 17 (1,1)
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 17 (1,1)
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 17 (1,1)
User set mode User set mode is accessed at power ON and allows you to set seldom-changed settings. In this case you can cus-
tomize the transceiver operation to suit your preferences and operating style. Entering the user set mode:
While pushing and holding [P1]
and [P2], rotate [VOL] to turn the power ON. Then, push and hold [<] to enter user set mode.
Push [<] several times to select the appropriate item. Then, push [Up] or [Down] to set the desired level/condition. Available set mode functions are Backlight, LCD Contrast, Beep, Beep Level, SQL Level, AF Min Level, Mic Gain, Vox Gain, Vox Delay and Battery Voltage.
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[P1]/[P2]
[Up]
[Up]
[Up]
[Up]
[Up]
[Up]
[Up]
[Up]
[Up]
[Up]
[Up]
[Up]
[Up]
[Up]
[Up]
[Up]
[Down]
[Down]
[Down]
[Down]
[Down]
[Down]
[Down]
[Down]
[Down]
[Down]
[Down]
[Down]
[Down]
[Down]
[Down]
[Down]
BASIC OPERATION 3
Rotate [VOL] to turn the power OFF to exit set mode.
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
[VOL]
User set mode is also available via a programmable key. Please refer to p. 10 [User Set Mode] section. 3 3 3 3 16
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 18 (1,1) 3 BASIC OPERATION I Scrambler function The voice scrambler function provides private communication between stations. The frequency inversion type is equipped to all versions. q Push [Scrambler] to turn the scrambler function ON. appears. w Push [Scrambler] again to turn the scrambler function OFF. disappears. 17
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 32 (1,1) 4 BATTERY CHARGING I Battery charging Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. CAUTION: To avoid damage to the transceiver, turn the power OFF while charging. Recommended temperature range for charging:
+10C to +40C (+50F to +104F) Use the specified chargers (BC-119N and BC-121N). NEVER use another manufactures charger. Use the specied AC adapter. NEVER use another manu-
factures adapter. Recommendation:
Charge the supplied battery pack for a maximum of up to 10 hours. Li-Ion batteries are different from Ni-
Cd batteries in that it is not necessary to completely charge and discharge them to prolong the battery life. Therefore, charging the battery in intervals, and not for extended periods is recommended. 18 I Battery caution R DANGER Charge the specied Icom batteries only. Only tested and approved for use with genuine Icom batter-
ies. Fire and/or explosion may occur when a third party bat-
tery pack or counterfeit product is charged. CAUTION! NEVER insert battery pack/transceiver (with the battery pack attached) in a wet or soiled condition into the charger. This may result in corrosion of the charger terminals or damage to the charger. The charger is not waterproof and water can easily get into it. NEVER incinerate used battery packs. Internal battery gas may cause an explosion. NEVER immerse the battery pack in water. If the battery pack becomes wet, be sure to wipe it dry BEFORE attaching it to the transceiver. NEVER short the terminals of the battery pack. Also, current may ow into nearby metal objects, such as a necklace, etc. Therefore, be careful when carrying with, or placing near metal objects, carrying in handbags, etc. AVOID leaving the battery pack in a fully charged, or completely discharged condition for long time. It causes shorter battery life. In case of leaving the battery pack unused for a long time, it must be kept safely after discharge, or use the battery until the battery indicator appears, then remove it from the transceiver. If your battery pack seems to have no capacity even after being charged, fully charge the battery pack again. If the bat-
teries still do not retain a charge (or very little), new battery pack must be purchased.
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 33 (1,1) I Optional battery chargers AD-110 installation q Install the AD-110 desktop charger adapter into the holder space of the BC-119N/BC-121N. w Connect the plugs of the BC-119N/BC-121N to the AD-110 desktop charger adapter with the connector, then install the adapter into the charger with the supplied screws. q AD-110 Connectors BATTERY CHARGING 4 Rapid charging with the BC-119N+AD-110 The optional BC-119N provides rapid charging of battery packs. The following items are additionally required. AD-110 charger adapter An AC adapter (may be supplied with BC-119N depending on version) or the DC power cable (OPC-515L/CP-17L). TRANSCEIVER BP-254 w Plugs Screws supplied with the charger adapter AC adapter
(Not supplied with some versions.) Optional OPC-515L (for 13.8 V power source) or CP-17L (for 12 V cigarette lighter socket) can be used instead of the AC adapter. AD-110 charger adapter is installed in BC-119N. 4 19
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 34 (1,1) 4 BATTERY CHARGING Rapid charging with the BC-121N+AD-100 The optional BC-121N allows up to 6 battery packs to be charged simultaneously. The following items are additionally required. Six AD-100 charger adapters An AC adapter (BC-124) or the DC power cable (OPC-656) TRANSCEIVER BP-254 IMPORTANT!: Battery charging Ensure the guide lobs on the battery pack are correctly aligned with the guide rails inside the charger adapter.
(This illustration is described with the BC-119N.) AC adapter
(Purchased separately) AD-110 charger adapters are installed in each slot. Lobs MULTI-CHARGER Guide rails 20 DC power cable (OPC-656)
(Connect with the DC power supply;
13.8 V/at least 7 A)
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 35 (1,1) OPTIONAL BATTERY CASE 5 I Optional battery case When using the optional battery case attached to the trans-
ceiver, install 6 AA (LR6) size alkaline batteries as illustrated at right. The BP-237 meets JIS waterproof specication grade 4. q Hook your nger under the latch, and open the cover in the direction of the arrow (q). (Fig.1) w Then, install 6 AA (LR6) size alkaline batteries. (Fig.2) Install the alkaline batteries only. Be sure to observe the correct polarity. Do not pin the ribbon under the batteries. e Close the cover by tting in the direction of the arrow (w) rst, then check the latch is in place (e). (Fig.1) Be sure the gasket and the ribbon are set correctly, and do not protrude from the battery case. (Fig.3) CAUTION:
When installing batteries, make sure they are all the same brand, type and capacity. Also, do not mix new and old batteries together. Keep battery contacts clean. Its a good idea to clean bat-
tery terminals once a week. Fig.1 q BP-237 Latch w Fig.2 Fig.3 e Gasket 5 21
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 38 (1,1) 6 SPEAKER-MICROPHONE I Optional HM-184 description I Attachment Attach the connector of the speaker-microphone into the
[SP/MIC] connector on the transceiver and tighten the screw. NEVER immerse the connector in water. If the connector becomes wet, be sure to dry it BEFORE attaching it to the transceiver. NOTE: The microphone is located at the top of the speaker-microphone, as shown in the diagram above. To maximize the readability of your transmitted signal (voice), hold the microphone approx. 5 to 10 cm (2 to 4 inches) from your mouth, and speak in a normal voice level. 22 CAUTION: Attach the speaker-microphone s connector securely to prevent accidental dropping, or water intru-
sion in the connector. IMPORTANT: KEEP the [SP/MIC] jack cover attached
(transceiver) when the speaker-microphone is not in use. Water will not get into the transceiver even if the cover is not attached, however, the terminals (pins) will become rusty, or the transceiver will function abnormally if the con-
nector becomes wet.
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 39 (1,1) OPTIONS 7 D BATTERY PACK BP-254 Li-Ion BATTERY PACK 7.4 V/3040 mAh Li-Ion battery pack, allows more than 8 hours operation. The same as supplied with the transceiver. D BELT CLIPS MB-115 BELT CLIP Exclusive alligator-type belt clip. The same as supplied with the transceiver. BP-237 BATTERY CASE Battery case for 6 AA (LR6) alkaline cells. D OPTIONAL UNITS UT-124R MAN DOWN UNIT D CHARGERS BC-119N DESKTOP CHARGER + AD-110 CHARGER ADAPTER
+ BC-145 AC ADAPTER For rapid charging of battery packs. An AC adapter is sup-
plied with the charger depending on versions. Charging time: approx. 4 hours when BP-254 is attached. BC-121N MULTI-CHARGER + AD-110 CHARGER ADAPTER (6 pcs.)
+ BC-124 AC ADAPTER For rapid charging of up to 6 battery packs (six AD-100s are required) simultaneously. An AC adapter should be pur-
chased separately. Charging time: approx. 4 hours when BP-254 is attached. UT-125 ENCRIPTION UNIT D DC CABLES CP-17L CIGARETTE LIGHTER CABLE Allows charging of the battery pack through a 12 V cigarette lighter socket. (For BC-119N) OPC-515L/OPC-656 DC POWER CABLES Allows charging of the battery pack using a 13.8 V power source instead of the AC adapter. OPC-515L: For BC-119N OPC-656 : For BC-121N OPC-1862 INTERFACE CABLE Provides advanced operation. 7 23
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 40 (1,1) 7 OPTIONS D OTHER OPTIONS HM-184 SPEAKER-MICROPHONE Full-sized waterproof (JIS grade 7; 1m/30 min.) speaker-
microphone including alligator type clip to attach to your shirt or collar, etc. FA-S25V/FA-S65V/FA-S66V FLEXIBLE ANTENNAS FA-S25V: 136148 MHz FA-S65V: 148160 MHz FA-S66V: 160174 MHz FA-S67VC CUT ANTENNAS FA-S67VC: 136174 MHz Some options may not available in some countries. Please ask your dealer for details. 24
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 42 (1,1) 8 SAFETY TRAINING INFORMATION W ARNING Your Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as Occupational Use Only, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the General Population in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for Occupational Use Only. In addition, your Icom radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields RF and Microwave. The accessories (antennas, batteries, belt clips, speaker-
microphone, etc. that is listed on Pages 3940) are authorized for use with this product. Use of accessories other than those specied may result in RF exposure lev-
els exceeding the FCC requirements for wireless RF exposure. 25 To ensure that your expose to RF electro-
magnetic energy is within the FCC allow-
able limits for occupational use, always adhere to the following guidelines:
CAU TION DO NOT operate the radio without a proper antenna attached, as this may damaged the radio and may also cause you to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or antenna specifically authorized by the manufacturer for use with this radio. DO NOT transmit for more than 50% of total radio use time (50% duty cycle). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the TX indicator lights red. You can cause the radio to transmit by pressing the PTT switch or VOX function. ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting and only use the Icom belt-clips listed on page 39 when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not exceeded. To provide the recipients of your transmission the best sound quality, hold the antenna at least 5 cm (2 inches) from your mouth, and slightly off to one side. The information listed above provides the user with the infor-
mation needed to make him or her aware of RF exposure, and what to do to assure that this radio operates with the FCC RF exposure limits of this radio.
!IC-F70_F80.qxd 04.11.9 0:02 PM Page 43 (1,1) SAFETY TRAINING INFORMATION 8 Electromagnetic Interference/Compatibility During transmissions, your Icom radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radi-
ation such as hospitals, aircraft, and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. 8 26
!IC-F70_F80.qxd 04.11.9 0:02 PM Page Z (1,1) A-6418D-1US Printed in Japan 2008 Icom Inc. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-10-29 | 136 ~ 174 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Class II permissive change or modification of presently authorized equipment |
2 | 2013-04-15 | 136 ~ 174 | TNF - Licensed Non-Broadcast Transmitter Held to Face | |
3 | 2008-06-09 | 136 ~ 174 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2014-10-29
|
||||
1 2 3 |
2013-04-15
|
|||||
1 2 3 |
2008-06-09
|
|||||
1 2 3 | Applicant's complete, legal business name |
ICOM Incorporated
|
||||
1 2 3 | FCC Registration Number (FRN) |
0005855366
|
||||
1 2 3 | Physical Address |
1-1-32 Kamiminami
|
||||
1 2 3 |
Osaka, N/A 547-0003
|
|||||
1 2 3 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
v******@ultratech-labs.com
|
||||
1 2 3 |
H******@atcb.com
|
|||||
1 2 3 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
AFJ
|
||||
1 2 3 | Equipment Product Code |
306200
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
A****** T********
|
||||
1 2 3 | Title |
General Manager
|
||||
1 2 3 | Telephone Number |
+8166********
|
||||
1 2 3 | Fax Number |
+8166********
|
||||
1 2 3 |
w******@icom.co.jp
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
Ultratech Engineering Labs
|
||||
1 2 3 | Name |
T******** L******
|
||||
1 2 3 | Physical Address |
3000 Bristol Circle
|
||||
1 2 3 |
Oakville, L6H 6G4
|
|||||
1 2 3 |
Canada
|
|||||
1 2 3 | Telephone Number |
905-8********
|
||||
1 2 3 | Fax Number |
905-8********
|
||||
1 2 3 |
t******@ultratech-labs.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | No | |||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | VHF Transeiver | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power listed is manufacturers rated power. Measured conducted power 37.8dBm. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information. This device contains functions that are not operational in U.S Territories except as noted in th e filing. This filing is only applicable for US operations. Class II permissive change to add new accessory, ACC Adaptor Model AD-118. Class II Permissive Change to replace PLL IC on the main unit, and add FCC rules 22, 74 and 80 services on the grants. | ||||
1 2 3 | Note 1: 16K0F3E, 11K0F3E, 8K10F1D, 8K10F1E Power listed is manufacturers rated power. Measured conducted power 37.8dBm. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information. This device contains functions that are not operational in U.S Territories except as noted in th e filing. This filing is only applicable for US operations. Class II permissive change to add new accessory, AC Adaptor Model AD-118. Class II permissive change to add new accessory, Icom Speaker Microphone, Model HM-184H | |||||
1 2 3 | Power listed is manufacturers rated power. Measured conducted power 37.8dBm. This radio must operate in push-to-talk mode with a duty factor not exceeding 50%, must be restricted to work related operations in an occupational/Controlled RF exposure Environment, and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting the exposure requirements and users must be provided with the training information. This device contains functions that are not operational in U.S Territories except as noted in the filing. This filing is only applicable for US operations. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
UltraTech Engineering Labs Inc.
|
||||
1 2 3 | Name |
T****** L******
|
||||
1 2 3 | Telephone Number |
905-8********
|
||||
1 2 3 | Fax Number |
905-8********
|
||||
1 2 3 |
t******@ultratech-labs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22,74,80,9 | EF | 136 | 174 | 6 | 2.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 2 | 22,74,80,9 | EF | 136 | 174 | 1 | 2.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 3 | 22,74,80,9 | EF | 136 | 174 | 6 | 2.5 ppm | 8K10F1E | |||||||||||||||||||||||||||||||||
1 | 4 | 22,74,80,9 | EF | 136 | 174 | 1 | 2.5 ppm | 8K10F1E | |||||||||||||||||||||||||||||||||
1 | 5 | 22,74,80,9 | EF | 136 | 174 | 6 | 2.5 ppm | 8K10F1D | |||||||||||||||||||||||||||||||||
1 | 6 | 22,74,80,9 | EF | 136 | 174 | 1 | 2.5 ppm | 8K10F1D | |||||||||||||||||||||||||||||||||
1 | 7 | 22,74,8 | EF | 136 | 174 | 6 | 2.5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
1 | 8 | 22,74,8 | EF | 136 | 174 | 1 | 2.5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 9 | EF | 136 | 174 | 6 | 2.5 ppm | NOTE1 | |||||||||||||||||||||||||||||||||
2 | 2 | 9 | EF | 136 | 174 | 1 | 2.5 ppm | NOTE1 | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 9 | BD | 136 | 174 | 6 | 2.5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
3 | 2 | 9 | BD | 136 | 174 | 6 | 2.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
3 | 3 | 9 | BD | 136 | 174 | 6 | 2.5 ppm | 8K10F1D | |||||||||||||||||||||||||||||||||
3 | 4 | 9 | BD | 136 | 174 | 6 | 2.5 ppm | 8K10F1E | |||||||||||||||||||||||||||||||||
3 | 5 | 9 | BD | 136 | 174 | 1 | 2.5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
3 | 6 | 9 | BD | 136 | 174 | 1 | 2.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
3 | 7 | 9 | BD | 136 | 174 | 1 | 2.5 ppm | 8K10F1D | |||||||||||||||||||||||||||||||||
3 | 8 | 9 | BD | 136 | 174 | 1 | 2.5 ppm | 8K10F1E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC