FCC ID: OMC425341 OMC425341

ICON Tablet Model: MP32-Argon 2 1 Directions Meanings of icons:

the tablet. Forbidding: forbid improper operations to avoid damaging Caution: cautions for operators to avoid potential damages. Please note and remember. Importance: important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade name may be used in this manual to refer to either the entities claiming the marks and names or their products. The manufacture disclaims any proprietary interest in trademarks and trade names other than its own. Information in this manual is subject to change without notice. Reproduction in any manner whatsoever without the written permission from the manufacture is strictly forbidden. Product images in this manual are for your reference only. 2 Contents Directions ......................................................................... 2 Safety Precautions .......................................................... 5 1 Know Your Tablet......................................................... 7 2 Get to Know Your System ........................................... 7 2-1 Add screen shortcuts ............................................... 8 2-2 Delete screen shortcuts/widgets ........................... 10 2-3 On-screen Keyboard .............................................. 11 3 System Settings ......................................................... 12 3-1 Wireless & networks ............................................... 12 3-2 Device ...................................................................... 15 3-3 Personal .................................................................. 16 3-4 System ..................................................................... 16 4 Browser ....................................................................... 17 3 5 Camera ........................................................................ 18 6 Specifications ............................................................. 20 7 CE Mark ....................................................................... 21 8 Shell ......................................................................... 24 4 Safety Precautions 1. DO NOT expose the tablet to dirty or dusty environment. Keep the environment clean and dry. 2. DO NOT place or drop objects on the top of the tablet. DO NOT shove any foreign objects into the tablet. DO NOT cover the LCD Screen strongly. 3. DO NOT expose the tablet to strong magnetic or electrical fields;

DO NOT place the floppy disk near or on the tablet, which may loss the data of the floppy disk. 4. DO NOT leave the tablet facing the sun as it can damage the LCD Screen, especially in the car. 5. DO NOT expose the tablet to or use near liquids, rain, or moisture. 6. DO NOT throw the tablet in municipal waste. Check local regulations for disposal of electronic products. 8. DO NOT insert anything into the tablet that may result in short circuit or damage the circuit. 9. Power off the tablet, if you want to install or remove some external devices which are not support hot-plug. 10. DO NOT disassemble tablet, only a certified service technician should perform repairs on your computer. Otherwise, the manufacturer should not hold result and problems may responsibility for the damage. the 11. Direct current To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals. 5 12. Meaning of crossed out wheeled dustbinDo not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposals at least free of charge. 13 the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation. 14. For AC/DC Adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible. 15. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 6 1 Know Your Tablet KEYS: connect to the console through a cable, so that the host can Picture1-1 control the volume or reset 7 AUDIO JACK: connect to the console through a cable to provide audio signal output. 2 Get to Know Your System Connect to the power supply and then it will display the home screen as below picture Click on the screen for ten times, pause for 5 seconds and then do it again for ten times clicks to enter the Setting priviledged mode as

. below. 8 Quick settings 9 Picture 2-2

: tap to return to the previous page.

: tap to enter Home screen.

: tap to open recent APPs list menu.

: tap to enter APPs Menu. If its your first time to use the tablet, the system will enter the guide menu. Please finish the initial setting following the instructions. 2-1 Add screen shortcuts On the home page, touch and hold the blank area to popup menu to change wallpaper;

Touch to access APPS menu as shown in picture 2-3; touch and hold an APPS icon to add it to the home screen. 10 Picture 2-3 2-2 Delete screen shortcuts/widgets On the home screen, touch and hold the shortcut or widget to be deleted until the icon appears at the top middle of the home screen. Drag the shortcuts to the remove icon to delete. 2-3 On-screen Keyboard Backspace Caps lock Expression Go Toggle letters & numbers Space Picture 2-4 Just touch a text field to open the on-screen keyboard;

Touch on the tool bar to close it. 11 3 System Settings 3-1 Wireless & networks 3-1-1 Wi-Fi Touch the Wi-Fi swtich behind of the Wi-Fi item to turn on the Wi-Fi function and then the system will auto-scan the available networks to display as shown in picture 3-2. Select one network and input its password if necessary to connect. Touch to perform advanced Wi-Fi settings. 12 Picture 3-2 3-1-2 Bluetooth The Bluetooth function enables you to exchange files between the tablet and other Bluetooth devices. Before this step, please activate the Bluetooth function of other device (mobile phone, Bluetooth earphone etc.) and make sure the device is in range. Touch the Bluetooth swtich behind of the Bluetooth item to turn on the Bluetooth function and then the system will auto-scan the visible Bluetooth device nearby and display after finding as shown in picture 3-3:

13 Picture 3-3 Touch the desired Bluetooth device to start pairing. Then according to the indications on both sides, users can complete the connection successfully in seconds. device. After pairing, you can share files between the unit and the Bluetooth Touch to perform advanced Bluetooth settings. 3-1-3 Data usage Touch to see the data usage information. 3-1-4 More 14 The system supplies users more networks settings, such as Airplane mode, Tethering and VPN. 3-2 Device 3-2-1 Display size ,Display size and Cast. 3-2-2 Notification Touch to open display settings, including Brightness level, Wallpaper, Sleep, Press power button twice for camera, Screen saver, Font All apps will be displayed here for you to choose whether to open the notification or not. 3-2-3 Sound Touch to do the Sound general settings. 3-2-4 Apps Picture 3-5 15 Touch to check the Apps information. Touch to check the usage of internal shared storage. 3-2-5 Storage 3-2-6 Memory Set memory in 3 hours, 6 hours,12 hours or 1 day and check the memory in the time period. 3-2-7 Users Touch to set the owners information, or add a new user. 3-3 Personal 3-3-1 Location 3-3-2 Security 3-3-3 Accounts To open or close location services. Security information of system settings. To add email accounts or google accounts. 3-3-4 Language & input You can also set the keyboard & input methods. 3-3-5 Backup & reset Reset the system to the factory states. 3-4 System 3-4-1 Date & time 16 To choose the system language and open/close the Spell checker. Option is about the current system date & time setting. You can set the date and time, and their format of the tablet. Look at what other accessibilities in the system or add some. 3-4-2 Accessibility 3-4-3 Printing Search connected printer to print some files. 3-4-4 Developer options To turn on/off the development settings. These settings are intended for development use only. They can cause your device and the applications on it to break or misbehave. 3-4-5 Schedule power on & off Choose the time and set the schedule power on or off as you need. 3-4-6 About tablet The detailed information about the unit, including Status, Legal information, Model number, Android version, Android security patch level,Kernel version, Build number and Custom build version. 4 Browser Open:

access the network browsing. After the network connection completed, touch the browser icon to Designing wed may slow the speed to browse the web. 17 5 Camera Open:

Take Pictures: 1. Aim the object. 2. Press to take a picture. 18 Picture5-1 Notice:

1. Select video mode if you want to record videos. 2. All photos or videos taken are both stored in the photos and gallery. 6 Specifications ICON part No. 425341 ICON model MP32-Argon 2 Description 31.5 inch display tablet, with touch, and core board OS Android 9.0 CPU Manufacturer MTK CPU Model MT8163 V/A CPU Core Model Cortex A53 / Quad core CPU Frequency 1.5 GHz LPDDR3 2G Mass Memory 8GB iNAND Resolution 1920RGB (W) x1080(H) Aspect Ratio Contrast WiFi 169 00:1 802.11a/b/g/n Bluetooth Version BT5.0 Front Camera 2M pixels Adapter 12V 5A (not included) 19 7 For CE Compliance with the RE Directive We, ICON Health & Fitness Inc. Operating Temperature: 0~40 RF EXPOSURE Hereby, ICON Health & Fitness Inc. declares that the radio equipment MP32-Argon2 is In compliance with Directive 2014/53/EU A minimum separation distance of 20 cm must be maintained between the user's body and the device, including the antenna during body-worn operation to comply with the RF exposure requirements in Europe. Operations in the 5.15-5.35GHz band are restricted to indoor usage only in following Countries 20 For AC/DC Adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible For FCC RF EXPOSURE INFORMATION The exposure standard for wireless device employs a unit of measurement known. For body worn operation, this device meets the FCC RF exposure guidelines for use with an accessory that contains no metal and be positioned a minimum of 20 cm from the body FCC CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the 21 instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The device for operation in the band 5150-5250MHz is only for indoor use reduce the potential foe harmful interference to co-channel mobile satellite Le dispositif destin tre utilis dans la bande 5150-5250 MHz est rserv une utilisation en intrieur, ce qui rduit les interfrences nuisibles potentielles avec les systmes mobiles par satellite co-canal For IC:

systems 22 This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 8 Shell 23 24 Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 25

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: certification@bureauveritas.com Website: https://www.cps.bureauveritas.com/

Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (obsolete) Updated company name & logo (current) Updated References and Contact info Revision History From 1.0 1.0 2.0 3.0 4.0 5.0 6.0 To 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sep-16-2014 Jun-27-2018 Aug-30-2020 SCS-F018: Project and Product Certification Representative Authorization Letter Page 1 of 3 Rev 7.0 Icon Health and Fitness, Inc. 2020.10.27 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Icon Health and Fitness, Inc.hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s):

FCC ID: OMC425341 Product Description: Tablet Model: MP32-Argon2 Sincerely, Clients signature Clients name / title Craig Jensen ,Compliance Engineer Contact information / address : 1500 South 1000 West, Logan Utah, United States 84321 SCS-F018: Project and Product Certification Representative Authorization Letter Page 2 of 3 Rev 7.0 Icon Health and Fitness, Inc. 2020.10.26 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Icon Health and Fitness, Inc. hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s):

FCC ID: OMC425341 Product Description: Tablet Model: MP32-Argon2 We affirm that between Bureau Veritas Consumer Product Services, Inc. and Icon Health and Fitness, Inc. any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Clients signature Clients name / title Craig Jensen ,Compliance Engineer Contact information / address : 1500 South 1000 West, Logan Utah, United States 84321 SCS-F018: Project and Product Certification Representative Authorization Letter Page 3 of 3 Rev 7.0

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: certification@bureauveritas.com Website: https://www.cps.bureauveritas.com/

Confidentiality Request Letter Revision History From Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(obsolete)

(obsolete) Updated company logo (current) Updated References and Contact Info 1.0 1.0 2.0 3.0 4.0 5.0 6.0 To 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 Aug-30-2020 SCS-F019: Confidentiality Request Letter Page 1 of 2 Rev 7.0 Icon Health and Fitness, Inc. 2020.10.27 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc:

Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: OMC425341 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential:

Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagram External Photos Internal Photos Operational Description/ Theory of Operation Parts List Tune-Up Procedure Schematics Test Setup Photos Users Manual Permanent Permanent Software Security The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, days; or for a specified date of not to exceed 180 days from the Grant Date Clients signature:

Clients name & title: Craig Jensen , Compliance Engineer Contact information / address: 1500 South 1000 West, Logan Utah, United States 84321 i Permanent confidentiality may be requested in accordance with FCC KDB 726920 SCS-F019: Confidentiality Request Letter Page 2 of 2 Rev 7.0

WIFI Channel 12 and 13 Declaration Letter Reason for Amendment Approved Date Revision History Initial Release (obsolete) Modify the select options (current) December 22, 2015 September 23, 2016 From Initial 1.0 To 1.0 2.0 SCS-F190 WiFi Channel 12&13 Declaration Letter Created by William Graff Page 1 of 2 Rev.2.0 Approved by Bao-Thuong Nguyen Icon Health and Fitness, Inc. WIFI Channel 12 and 13 Declaration Letter FCC ID: OMC425341 Declaration We declare the equipment identified below with regards to Channel 12 and 13 capabilities for Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Craig Jensen ,Compliance Engineer Signature:

Phone: (435) 786-5915 Email: craig.jensen@iconfitness.com Date:2020.10.27 SCS-F190 WiFi Channel 12&13 Declaration Letter Created by William Graff Page 2 of 2 Rev.2.0 Approved by Bao-Thuong Nguyen