FCC ID: OMC415321 Tablet

ICON Tablet Model: MP14-Argon2 Directions Meanings of icons:

1 Forbidding: forbid improper operations to avoid damaging the tablet. Caution: cautions for operators to avoid potential damages. Please note and remember. Importance: important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade name may be used in this manual to refer to either the entities claiming the marks and names or their products. The manufacture disclaims any proprietary interest in trademarks and trade names other than its own. Information in this manual is subject to change without notice. Reproduction in any manner whatsoever without the written permission from the manufacture is strictly forbidden. Product images in this manual are for your reference only. Contents 2 Directions ......................................................................... 1 Safety Precautions .......................................................... 4 1 Know Your Tablet......................................................... 7 2 Get to Know Your System ........................................... 7 2-1 Add screen shortcuts ............................................... 8 2-2 Delete screen shortcuts/widgets ........................... 10 2-3 On-screen Keyboard .............................................. 11 3 System Settings ......................................................... 12 3-1 Wireless & networks ............................................... 12 3-2 Device ...................................................................... 15 3-3 Personal .................................................................. 16 3-4 System ..................................................................... 16 4 Browser ....................................................................... 17 5 Camera ........................................................................ 18 3 6 Specifications ............................................................. 20 7 CE Mark ....................................................................... 21 8 Shell ......................................................................... 24 Safety Precautions 1. DO NOT expose the tablet to dirty or dusty environment. Keep the environment clean and dry. 4 2. DO NOT place or drop objects on the top of the tablet. DO NOT shove any foreign objects into the tablet. DO NOT cover the LCD Screen strongly. 3. DO NOT expose the tablet to strong magnetic or electrical fields;

DO NOT place the floppy disk near or on the tablet, which may loss the data of the floppy disk. 4. DO NOT leave the tablet facing the sun as it can damage the LCD Screen, especially in the car. 5. DO NOT expose the tablet to or use near liquids, rain, or moisture. 6. DO NOT throw the tablet in municipal waste. Check local regulations for disposal of electronic products. 8. DO NOT insert anything into the tablet that may result in short circuit or damage the circuit. 9. Power off the tablet, if you want to install or remove some external devices which are not support hot-plug. 10. DO NOT disassemble tablet, only a certified service technician should perform repairs on your computer. Otherwise, problems may the manufacturer should not hold result and responsibility for the damage. the 11. Direct current To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals. 5 12. Meaning of crossed out wheeled dustbinDo not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposals at least free of charge. 13 the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation. 14. For AC/DC Adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible. 15. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 6 1 Know Your Tablet KEYS: connect to the console through a cable, so that the host can Picture1-1 control the volume or reset audio signal output. AUDIO JACK: connect to the console through a cable to provide 7 2 Get to Know Your System Connect to the power supply and then it will display the home screen as below picture Click on the screen for ten times, pause for 5 seconds and then do it again for ten times clicks to enter the Setting priviledged mode as

. below. 8 Picture 2-1 Quick settings 9 Picture 2-2

: tap to return to the previous page.

: tap to enter Home screen.

: tap to open recent APPs list menu.

: tap to enter APPs Menu. If its your first time to use the tablet, the system will enter the guide menu. Please finish the initial setting following the instructions. 2-1 Add screen shortcuts On the home page, touch and hold the blank area to popup menu to change wallpaper;

Touch to access APPS menu as shown in picture 2-3; touch and hold an APPS icon to add it to the home screen. 10 Picture 2-3 2-2 Delete screen shortcuts/widgets On the home screen, touch and hold the shortcut or widget to be deleted until the icon appears at the top middle of the home screen. Drag the shortcuts to the remove icon to delete. 2-3 On-screen Keyboard Backspace Expression Go Toggle letters & numbers Space Picture 2-4 Just touch a text field to open the on-screen keyboard;

Touch on the tool bar to close it. 11 Caps lock button 3 System Settings 3-1 Wireless & networks 3-1-1 Wi-Fi Touch the Wi-Fi swtich behind of the Wi-Fi item to turn on the Wi-Fi function and then the system will auto-scan the available networks to display as shown in picture 3-2. Select one network and input its password if necessary to connect. Touch to perform advanced Wi-Fi settings. 12 Picture 3-2 3-1-2 Bluetooth The Bluetooth function enables you to exchange files between the tablet and other Bluetooth devices. Before this step, please activ ate the Bluetooth function of other device (mobile phone, Bluetooth earphone etc .) and make sure the device is in range. Touch the Bluetooth swtich behind of the Bluetooth item to turn on the Bluetooth function and then the system will auto-scan the visible Bluetooth device nearby and display after finding as shown in picture 3-3:

13 Picture 3-3 Touch the desired Bluetooth device to start pairing. Then according to the indications on both sides, users can complete the connection successfully in seconds. device. After pairing, you can share files between the unit and the Bluetooth Touch to perform advanced Bluetooth settings. 3-1-3 Data usage Touch to see the data usage information. 3-1-4 More 14 The system supplies users more networks settings, such as Airplane mode, Tethering and VPN. 3-2 Device 3-2-1 Display size ,Display size and Cast. 3-2-2 Notification Touch to open display settings, including Brightness level, Wallpaper, Sleep, Press power button twice for camera, Screen saver, Font All apps will be displayed here for you to choose whether to open the notification or not. 3-2-3 Sound Touch to do the Sound general settings. 3-2-4 Apps Picture 3-5 15 Touch to check the Apps information. Touch to check the usage of internal shared storage. 3-2-5 Storage 3-2-6 Memory Set memory in 3 hours, 6 hours,12 hours or 1 day and check the memory in the time period. 3-2-7 Users Touch to set the owners information, or add a new user. 3-3 Personal 3-3-1 Location 3-3-2 Security 3-3-3 Accounts To open or close location services. Security information of system settings. To add email accounts or google accounts. 3-3-4 Language & input You can also set the keyboard & input methods. 3-3-5 Backup & reset Reset the system to the factory states. 3-4 System 3-4-1 Date & time 16 To choose the system language and open/close the Spell checker. Option is about the current system date & time setting. You can set the date and time, and their format of the tablet. Look at what other accessibilities in the system or add some. 3-4-2 Accessibility 3-4-3 Printing Search connected printer to print some files. 3-4-4 Developer options To turn on/off the development settings. These settings are intended for development use only. They can cause your device and the applications on it to break or misbehave. 3-4-5 Schedule power on & off Choose the time and set the schedule power on or off as you need. 3-4-6 About tablet The detailed information about the unit, including Status, Legal information, Model number, Android version, Android security patch level,Kernel version, Build number and Custom build version. 4 Browser Open:

access the network browsing. After the network connection completed, touch the browser icon to Designing wed may slow the speed to browse the web. 17 5 Camera Open:

Take Pictures: 1. Aim the object. 2. Press to take a picture. 18 Picture5-1 Notice:

1. Select video mode if you want to record videos. 2. All photos or videos taken are both stored in the photos and gallery. 6 Specifications ICON part No. 415321 ICON model MP14-Argon2 Description 14 inch display tablet, with touch, OS and core board Android 9.0 CPU Manufacturer MTK CPU Model MT8163 V/A CPU Core Model Cortex A53 / Quad core CPU Frequency 1.5 GHz LPDDR3 2G Mass Memory 8GB iNAND Resolution 1920RGB (W) x1080(H) Aspect Ratio Contrast WiFi 1609 800:1 802.11a/b/g/n Bluetooth Version BT5.0 Front Camera 2M pixels Adapter 12V 2A (not included) 19 This radio equipment operates with the following frequency bands and maximum EIRP power:

2.4G WIFI:19.08 dBm;

5G WIFI:18.42 dBm;

BT EDR :9.88 dBm;

BT BLE:9.59 dBm. 7 For CE Compliance with the RE Directive We, ICON Health & Fitness Inc. Hereby, ICON Health & Fitness Inc. declares that the radio equipment MP14-Argon2 is In compliance with Directive 2014/53/EU SW and HW Version Product SW Version: Model number Argon Product HW Version: A492C V2.0 Operating Temperature: 0~40 RF EXPOSURE A minimum separation distance of 20 cm must be maintained between the user's body and the device, including the antenna during body -worn operation to comply with the RF exposure requirements in Europe. 20 Operations in the 5.15-5.35GHz band are restricted to indoor usage only in following Countries For AC/DC Adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible For FCC RF EXPOSURE INFORMATION The exposure standard for wireless device employs a unit of measurement known. For body worn operation, this device meets the FCC RF exposure guidelines for use with an accessory that contains no metal and be positioned a minimum of 20 cm from the body FCC CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful 21 interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 22 The device for operation in the band 5150-5250MHz is only for indoor use reduce the potential foe harmful interference to co-channel mobile satellite For IC:

systems Le dispositif destin tre utilis dans la bande 5150-5250 MHz est rserv une utilisation en intrieur, ce qui rduit les interfrences nuisibles potentielles avec les systmes mobiles par satellite co-canal This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 23 8 Shell 24 EU Declaration of Conformity (DoC) Hereby, Name of manufacturer:

ICON Health & Fitness Inc. 1500 South 1000 West,Logan, UT 84321, USA Address:

City:

Country:

Logan United States declares that the DoC is issued under its sole responsibility and that this product:

Product description:

Tablet Type designation(s):

MP14-ARGON2 Trademark:

Product identification element N/A MP14-ARGON2 is in conformity with the relevant Union harmonization legislation:

Radio Equipment directive: 2014 / 53 / EU. with reference to the following standards applied:

1. Health (Article 3.1(a) of Directive 2014/53/EU) Applied Standard(s):

EN 62311: 2008 2. Safety (Article 3.1(a) of Directive 2014/53/EU) Applied Standard(s):

EN 62368-1:2014+A11:2017 3. Electromagnetic compatibility (Article 3.1 (b) of Directive 2014/53/EU) Applied Standard(s):

EN 301 489-1 V2.2.3(2019-11) EN 301 489-3 V2.1.1 (2019-03) EN 301 489-17 V3.2.0 (2017-03) Draft EN 55032:2015+AC:2016 EN 55035:2017 Applied Standard(s):

ETSI EN 300 328 V2.1.1 (2016-11) ETSI EN 301 893 V2.1.1 (2017-05) 4. Radio frequency spectrum usage (Article 3.2 of Directive 2014/53/EU) The Notified Body BV CPS., with Notified Body number 2200 performed:

Modules: B+C and issued the EU-type examination certificate. Signed for and on behalf of:

Date:

City:

Name:

Title:

Signature:

March 26, 2020 Logan Joshua A.Tucker Regulatory Compliance Engineer

ICON Tablet Model: MP14-Argon2 Directions Meanings of icons:

1 Forbidding: forbid improper operations to avoid damaging the tablet. Caution: cautions for operators to avoid potential damages. Please note and remember. Importance: important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade name may be used in this manual to refer to either the entities claiming the marks and names or their products. The manufacture disclaims any proprietary interest in trademarks and trade names other than its own. Information in this manual is subject to change without notice. Reproduction in any manner whatsoever without the written permission from the manufacture is strictly forbidden. Product images in this manual are for your reference only. Contents 2 Directions ......................................................................... 1 Safety Precautions .......................................................... 4 1 Know Your Tablet......................................................... 7 2 Get to Know Your System ........................................... 7 2-1 Add screen shortcuts ............................................... 8 2-2 Delete screen shortcuts/widgets ........................... 10 2-3 On-screen Keyboard .............................................. 11 3 System Settings ......................................................... 12 3-1 Wireless & networks ............................................... 12 3-2 Device ...................................................................... 15 3-3 Personal .................................................................. 16 3-4 System ..................................................................... 16 4 Browser ....................................................................... 17 5 Camera ........................................................................ 18 3 6 Specifications ............................................................. 20 7 CE Mark ....................................................................... 21 8 Shell ......................................................................... 24 Safety Precautions 1. DO NOT expose the tablet to dirty or dusty environment. Keep the environment clean and dry. 4 2. DO NOT place or drop objects on the top of the tablet. DO NOT shove any foreign objects into the tablet. DO NOT cover the LCD Screen strongly. 3. DO NOT expose the tablet to strong magnetic or electrical fields;

DO NOT place the floppy disk near or on the tablet, which may loss the data of the floppy disk. 4. DO NOT leave the tablet facing the sun as it can damage the LCD Screen, especially in the car. 5. DO NOT expose the tablet to or use near liquids, rain, or moisture. 6. DO NOT throw the tablet in municipal waste. Check local regulations for disposal of electronic products. 8. DO NOT insert anything into the tablet that may result in short circuit or damage the circuit. 9. Power off the tablet, if you want to install or remove some external devices which are not support hot-plug. 10. DO NOT disassemble tablet, only a certified service technician should perform repairs on your computer. Otherwise, problems may the manufacturer should not hold result and responsibility for the damage. the 11. Direct current To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals. 5 12. Meaning of crossed out wheeled dustbinDo not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposals at least free of charge. 13 the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation. 14. For AC/DC Adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible. 15. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 6 1 Know Your Tablet KEYS: connect to the console through a cable, so that the host can Picture1-1 control the volume or reset audio signal output. AUDIO JACK: connect to the console through a cable to provide 7 2 Get to Know Your System Connect to the power supply and then it will display the home screen as below picture Click on the screen for ten times, pause for 5 seconds and then do it again for ten times clicks to enter the Setting priviledged mode as

. below. 8 Picture 2-1 Quick settings 9 Picture 2-2

: tap to return to the previous page.

: tap to enter Home screen.

: tap to open recent APPs list menu.

: tap to enter APPs Menu. If its your first time to use the tablet, the system will enter the guide menu. Please finish the initial setting following the instructions. 2-1 Add screen shortcuts On the home page, touch and hold the blank area to popup menu to change wallpaper;

Touch to access APPS menu as shown in picture 2-3; touch and hold an APPS icon to add it to the home screen. 10 Picture 2-3 2-2 Delete screen shortcuts/widgets On the home screen, touch and hold the shortcut or widget to be deleted until the icon appears at the top middle of the home screen. Drag the shortcuts to the remove icon to delete. 2-3 On-screen Keyboard Backspace Expression Go Toggle letters & numbers Space Picture 2-4 Just touch a text field to open the on-screen keyboard;

Touch on the tool bar to close it. 11 Caps lock button 3 System Settings 3-1 Wireless & networks 3-1-1 Wi-Fi Touch the Wi-Fi swtich behind of the Wi-Fi item to turn on the Wi-Fi function and then the system will auto-scan the available networks to display as shown in picture 3-2. Select one network and input its password if necessary to connect. Touch to perform advanced Wi-Fi settings. 12 Picture 3-2 3-1-2 Bluetooth The Bluetooth function enables you to exchange files between the tablet and other Bluetooth devices. Before this step, please activ ate the Bluetooth function of other device (mobile phone, Bluetooth earphone etc .) and make sure the device is in range. Touch the Bluetooth swtich behind of the Bluetooth item to turn on the Bluetooth function and then the system will auto-scan the visible Bluetooth device nearby and display after finding as shown in picture 3-3:

13 Picture 3-3 Touch the desired Bluetooth device to start pairing. Then according to the indications on both sides, users can complete the connection successfully in seconds. device. After pairing, you can share files between the unit and the Bluetooth Touch to perform advanced Bluetooth settings. 3-1-3 Data usage Touch to see the data usage information. 3-1-4 More 14 The system supplies users more networks settings, such as Airplane mode, Tethering and VPN. 3-2 Device 3-2-1 Display size ,Display size and Cast. 3-2-2 Notification Touch to open display settings, including Brightness level, Wallpaper, Sleep, Press power button twice for camera, Screen saver, Font All apps will be displayed here for you to choose whether to open the notification or not. 3-2-3 Sound Touch to do the Sound general settings. 3-2-4 Apps Picture 3-5 15 Touch to check the Apps information. Touch to check the usage of internal shared storage. 3-2-5 Storage 3-2-6 Memory Set memory in 3 hours, 6 hours,12 hours or 1 day and check the memory in the time period. 3-2-7 Users Touch to set the owners information, or add a new user. 3-3 Personal 3-3-1 Location 3-3-2 Security 3-3-3 Accounts To open or close location services. Security information of system settings. To add email accounts or google accounts. 3-3-4 Language & input You can also set the keyboard & input methods. 3-3-5 Backup & reset Reset the system to the factory states. 3-4 System 3-4-1 Date & time 16 To choose the system language and open/close the Spell checker. Option is about the current system date & time setting. You can set the date and time, and their format of the tablet. Look at what other accessibilities in the system or add some. 3-4-2 Accessibility 3-4-3 Printing Search connected printer to print some files. 3-4-4 Developer options To turn on/off the development settings. These settings are intended for development use only. They can cause your device and the applications on it to break or misbehave. 3-4-5 Schedule power on & off Choose the time and set the schedule power on or off as you need. 3-4-6 About tablet The detailed information about the unit, including Status, Legal information, Model number, Android version, Android security patch level,Kernel version, Build number and Custom build version. 4 Browser Open:

access the network browsing. After the network connection completed, touch the browser icon to Designing wed may slow the speed to browse the web. 17 5 Camera Open:

Take Pictures: 1. Aim the object. 2. Press to take a picture. 18 Picture5-1 Notice:

1. Select video mode if you want to record videos. 2. All photos or videos taken are both stored in the photos and gallery. 6 Specifications ICON part No. 415321 ICON model MP14-Argon2 Description 14 inch display tablet, with touch, OS and core board Android 9.0 CPU Manufacturer MTK CPU Model MT8163 V/A CPU Core Model Cortex A53 / Quad core CPU Frequency 1.5 GHz LPDDR3 2G Mass Memory 8GB iNAND Resolution 1920RGB (W) x1080(H) Aspect Ratio Contrast WiFi 1609 800:1 802.11a/b/g/n Bluetooth Version BT5.0 Front Camera 2M pixels Adapter 12V 2A (not included) 19 7 For CE Compliance with the RE Directive We, ICON Health & Fitness Inc. Hereby, ICON Health & Fitness Inc. declares that the radio equipment MP14-Argon2 is In compliance with Directive 2014/53/EU SW and HW Version Product SW Version: Model number Argon Product HW Version: A492C V2.0 Operating Temperature: 0~40 RF EXPOSURE A minimum separation distance of 20 cm must be maintained between the user's body and the device, including the antenna during body -worn operation to comply with the RF exposure requirements in Europe. Operations in the 5.15-5.35GHz band are restricted to indoor usage only in following Countries 20 For AC/DC Adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible For FCC RF EXPOSURE INFORMATION The exposure standard for wireless device employs a unit of measurement known. For body worn operation, this device meets the FCC RF exposure guidelines for use with an accessory that contains no metal and be positioned a minimum of 20 cm from the body FCC CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation 21 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. For IC:

22 The device for operation in the band 5150-5250MHz is only for indoor use reduce the potential foe harmful interference to co-channel mobile satellite systems Le dispositif destin tre utilis dans la bande 5150-5250 MHz est rserv une utilisation en intrieur, ce qui rduit les interfrences nuisibles potentielles avec les systmes mobiles par satellite co-canal This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 8 Shell 23 24

350.97 RESET NFC USB HOST AUDIO OUT POWER 15.7 ICON Part No.: 415321 ICON Name: MP14-Argon2-Back Model No.: MP14-ARGON2 POWER SOURCE: DC 12V 2A POWER CONSUMPTION 24W FCC ID: OMC415321 IC: 3673A-415321 ICON Health & Fitness Inc Made in China 5mm 8mm 7.03mm 5.68mm 0723010000343-----5PIN PANTONE 877 C PANTONE 431 C MID-K1401 MID-K1401 19.11.04

Icon Health and Fitness, Inc. 1500 South 1000 West Logan, Utah United States 84321 Date: March 24, 2020 Power of Attorney To whom it may concern, Please be notified that |, Joshua A. Tucker, have designated Wiky Zhang of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co. Ltd as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Wiky Zhang of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co. Ltd on the matters relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. As defined in 47 CFR Ch. 1.U.S.C. 862, we further certify that neither the applicant nor any party to this application is subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act. This authorization is limited to the product of as following:

FCC ID: OMC415321 If you have any acknowledgement and response, please send it to Wiky Zhang of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co, Ltd directly. Should you have any question or comment regarding this matter, please have my best attention. Sincerely yours, Suche Joshua A. Tucker/ Compliance Engineer Icon Health and Fitness, inc. Tel.: 435-786-5420 Fax: 435-750-7739 E-mail: joshua.tucker@iconfitness.com

Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com 775 Montague Expressway Milpitas, CA 95035 Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (obsolete) Updated company name & logo (current) Revision History From 1.0 1.0 2.0 3.0 4.0 5.0 To 1.0 2.0 3.0 4.0 5.0 6.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sep-16-2014 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 March 26, 2020 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Icon Health and Fitness, Inc. hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s):

FCC ID: OMC415321 Product Description: Tablet Model: MP14-ARGON2 Sincerely, _____________________ Craig Jensen/ Compliance Engineer Icon Health and Fitness, Inc. Tel.: 435-786-5915 Fax: 435-750-7739 E-mail: craig.jensen@iconfitness.com SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0

Icon Health and Fitness, Inc. 1500 South 1000 West Logan , Utah United States 84321 Date: March 24, 2020 Declaration To whom it may concern, This is a WLAN/Bluetooth combination antenna with FCC ID: OMC415321 This WLAN/Bluetooth co-existence mechanism is to ensure that the WLAN and Bluetooth transmitters would not simultaneously operate. Therefore, WLAN and Bluetooth antenna in FCC ID: OMC415321 should not be considered to be able to transmit simultaneously. Though the users can use WLAN and Bluetooth simultaneously, but the real situation is that WLAN and Bluetooth are used by time sharing and no overlap transmission. Should you have any question, please have my best attention. Sincerely yours, Joshua A. Tucker/ Compliance Engineer Icon Health and-Fitness,Inc. cet a . - ane Tel.: 435-786-5420 Fax: 435-750-7739 E-mail: joshua.tucker@iconfitness.com

Icon Health and Fitness, Inc. 1500 South 1000 West Logan , Utah United States 84321 Date: April 23, 2020 Power of Attorney To whom it may concern, Please be notified that |, Craig Jensen, have designated Joshua A.Tucker to be a contact person and to sign all declaration letters relating to FCC application for equipment authorization. Any and all acts carried out by Joshua Tucker on my behalf shall have the same effect as acts of myself. This authorization is limited to the product of as following:

FCC ID: OMC415321 If you have any questions regarding the authorization, please dont hesitate to contact me. Sincerely yours, C aa Jensen i me Craig Jensen/ Compliance Engineer Icon Health and Fitness, Inc. Tel.: (435) 786-5915 Fax: (801) 753-0209 E-mail:craig.jensen@iconfitness.com

Icon Health and Fitness, Inc. 1500 South 1000 West Logan , Utah United States 84321 Date: March 24, 2020 Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Subject: Request for Confidentiality FCC ID: OMC415321 To Whom It May Concer, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Software operational description Part List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations, External Photos oa Internal Photos Sd Test Setup Photos oa Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued, Best Regards, shua A. Tucker/ Compliance Engineer Icon Health and Fitness, Inc. Tel.; 435-786-5420 Fax: 435-750-7739 E-mail: joshua.tucker@iconfitness.com

Icon Health and Fitness, Inc. 1500 South 1000 West Logan, Utah United States 84321 Date: March 24, 2020 Declaration We, Icon Health and Fitness Inc., declare that the device, FCC ID: OMC415321 does not support any non-US channels in all the operational mode(s), All non-US frequencies, US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable. Should you have any question or comment regarding this matter, please do not hesitate to contact me. Sincerely yours, Joshua A. Tucker/ Compliance Engineer Icon Health and Fitness, Inc. Tel.: 435-786-5420 Fax: 435-750-7739 E-mail: joshua.tucker@iconfitness.com

Icon Health and Fitness, Inc. 1500 South 1000 West Logan , Utah United States 84321 March 24, 2020 DTS-UNII Device Declaration Letter To whom it may concern, We have declared below featured for FCC equipment authorization, Device FCC ID: OMC415321

(1) DFS Device -- [_] Master [-] Client with Radar detection capability , X] Client without radar detection capability [] N/A

(2) Active / Passive Scanning , ad-hoc mode access point capability Frequency Band Active Scanning | passive scanning | Ad Hoc Mode or Access point

(MHz) (the device can | (where the device WIFI Direct capability transmit a probe | is can listen only capability

(beacon)) with no probes) 5150-5250 XX] Yes, _] No Yes , x] No Yes,[_|No | [x] Yes,[]No 5250-5350 [-] Yes , | No XX] Yes, [_] No ["] Yes , KI No |_| Yes , KI No 5470-5725 [_] Yes, B<] No | Yes , [] No [_] Yes , Bd No L]| Yes , BX] No 5725-5850 KX] Yes , L] No [_] Yes , x] No (_] Yes , KT No [-] Yes , [No

(3) Country code selection ability - [] Yes , IX] No If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) ee

(4) Meet 15.202 requirement - x] Yes, [[] No, Please check below:

(JA master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices IXIA client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5)___ For client devices that have software configuration control to operate in different modes (active scanning ._|. in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. DX] Apply, [_] No Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled) Icon Health and Fitness, Inc. 1500 South 1000 West Logan , Utah United States 84321 Zoe. side Joshua A. Tucker/ Compliance Engineer Icon Health and Fitness, Inc. Tel.: 435-786-5420 Fax: 435-750-7739 E-mail: joshua.tucker@iconfitness.com