MYK2003FE Manual MYK2003FE Manual Rev1.0 14 12, 2021
- 1
MYK2003FE Manual Date Author Explanation 14 12, 2021 Minoru Otani New 1 Login .......................................................................................................................................... 3 2 System ....................................................................................................................................... 4 3 Network ..................................................................................................................................... 5 4 Wireless ..................................................................................................................................... 6 History Rev 1.0 List
- 2
MYK2003FE Manual For a PC connect to MYK2003FE by LAN or WLAN. In the Web browser of PC input the following address:
1 Login http://192.168.1.1 Usr ID: root Password: nothing
- 3
MYK2003FE Manual 2 System In System menu can setup the following:
1 System time, Logging, Time Synchronization, Language and Style. 2 Router Password, SSH Access, SSH-Keys 3 Software 4 Initscripts, Local Startup 5 Scheduled Tasks 6 LED Configuration 8 Reboot 7 Backup, Restore, Save mtdblock contents, Flash new firmware image
- 4
MYK2003FE Manual 3 Network 1 Interface 2 Wireless 3 DHCP and DNS 4 Hostnames 5 Static Routes 6 Firewall 7 Diagnostics
- 5
In Network menu, can setup the following:
MYK2003FE Manual 4 Wireless
- 6
MYK2003FE Manual In the Devie configuration can setup:
1 Wireless mode(802.11 bg/n) 2 Channle 3 Maximun transmit power In the Interface Configuration can setup:
1 Mode( Acces Point/Client), ESSID, Network, Hide ESSID, WMM mode 2 Wireless Security( Encyption, Cipher, Key) 3 Mac Filter 4 Adbanced Settings
- 7
MYK2003FE Manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. connected. FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Non-modification Statement:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Professional Installation Instructions This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting.
- 8
MYK2003FE Manual This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following
(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Canada:
two conditions:
Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This device complies with RSS-247 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. Cet appareil numrique de la Classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Dclaration dexposition la radiation : Cet quipement respecte les limites dexposition aux rayonnements IC dfinies pour un environnement non contrl. Cet quipement doit tre install et mis en marche une distance minimale de 20 cm qui spare llment rayonnant de votre corps. Lmetteur ne doit ni tre utilis avec une autre antenne ou un autre metteur ni se trouver leur proximit. This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna 1 2 3 Le prsent metteur radio (identifier le dispositif par son numro de certification ou son numro de modle s'il fait partie du matriel de catgorie I) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et Gain 12 dBi @ 2.4GHz 5 dBi @ 2.4GHz 2 dBi @ 2.4GHz Type Panel Dipole Dipole
- 9
MYK2003FE Manual l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Antenna 1 2 3 Gain 12 dBi @ 2.4GHz 5 dBi @ 2.4GHz 2 dBi @ 2.4GHz Type Panel Dipole Dipole
- 1 0