HaLow-U User Guide How to log in Please plug the USB cable between USB port of the PC and USB port of the HaLow-U
<> 6 G@aan Authorization Required Disable g laptop (PC )wireless / ethernet connection Disable firewall Default IP - 192.168.1.1 No password required 192.168.1.1/egi-bin/luciVadmir/network/wireless aenr Be aa Wireless Overview ws Generic 802.11ah =
a) Device is not active Rosen EB Associated Stations Nocwork MAC adaross Host Signal Noise RX Rate /TX Rate No information avaiable
) OpenWrt - Wireless - LuCl x + v - x CQ A FES | 192,168.1.1/cgi-bin/luci/admin/network/wireless tats moue: jwaster | 3310; Upenvvtt dBm Wireless is not associated Wireless networkis disabled | Enable Mode Band Channel Width Operating frequency | N a vi) MHz v Maximum transmit power | driver default |- Current power: unknown
@ Specifies the maximum transmit power the wireless radio may use. Depending on regulatory requirements and wireless usage, the actual transmit power may be reduced by the driver. Interface Configuration General Setup Wireless Security| MAC-Filter Advanced Settings Mode | Access Point EssiD | Qpe Wel Network | lan: -
@ Choose the network(s) you want to attach to this wireless interface or fill out the custom field to define a new network Hide ESSID
@ Where the ESSID is hidden, clients may fail to roam and airtime efficiency may be significantly reduced WMM Mode |v)
(0) OpenWrt-Wireless-Lucl Xe
CQ A Fez | 192.168.1.1/cgi-bin/luci/admin/network/wireless
@ Specifies the maximum transmit power the wireless radio may use. Depending on regulatory requirements and wireless usage, the actual transmit power may be reduced by the driver. Interface Configuration General Setup less Security | MAC-Filter | Advanced Settings Mode Access Point ESSID OpenWrt Network | lan: 3
@ Choose the network(s) you want to attach to this wireless interface or fill out the custom field to define a new network. Hide ESSID
@ Where the ESSID is hidden, clients may fail to roam and airtime efficiency may be significantly reduced WMM Mode |v)
@ Where Wi-Fi Multimedia (WMM) Mode QoS is disabled, clients may be limited to 802.11ah rates. Dismiss
() OpenWet-Wireless-Lucl Xe Va x CD A FB2| 192,168.1.1/cgi-bin/luci/admin/network/wireless aerwr BeO:
REFRESHING UNSAVED C Wireless Overview
= aia Generic 802.114 Amal Device is not active SSID: OpenWrt | Mode: Master reless is disabled Aaa]
Remove
@ disabled fl Associated Stations Network MAC address Host Signal / Noise RX Rate / TX Rate No information available ve & Apply Save Powered by LuC! Master (git-22.058.70382-d29400e) nVluci/admin, Wireless Overview Generic 802.11ah 2 ese Channel: 1(903.5MHz) | Brae? Ms S10: Open | Mode: taste si) BSSIO: 00 C0 CABY-05 6] Encryption: Nene Associated Stations Rest GEC Cisaio i Spear mee we OO:
Status ~ System Netw REFRESN Internet IP v4 Intemet IP Incemet ote 0h tm 515 connects: NO connect: NO toca tne 2022-0321 21372 Comat since connected noe eet Vorion 10107 ew revert ence ARMVT Processox ov 5 (7) caenayve caeuays rare veson:Opanit SNAPSHOT r1805961249212928216 OpenWrt - Wir co a 3 E ey 3 REFRESHING No password set!
There is no password set on this router. Please configure a root password to protect the web interface. Wireless Overview za Generic 802.tta recat 7a
| openwrt.Jan/cgi-bin/luci/admit ork/wirele:
Join Network: Wireless Scan Signal ssiD Starting w Dismiss Join Network: Wireless Scan Signal ssiD BssID Encryption den) _opentn wncocasncses None Stop refresh | Dismiss tlan/cgl-bin/lucl/admin Channel Encryption None Stop refesh ea -& | 192.168.1.1/cgi-bin/luci/admi Joining Network: "OpenWrt"
Replace wireless configuration Check this option to delete the existing networks from this rao. wwan
@ The allowed characters are: &-
Lock to BSSID
@ instead of joining any network with a matching SSID, only connect to the BSSID 0 Create /Assiga frewallzone | (lan) ian: g |
ee
]tto assign to this interface. Select unspecified to remove the interface from the associated zone or fil out the custom field to d
{ unspecified
(0) OpenWrt-Wireless-Lucl Xe A FBS | openwrtian/cgi-bin/luci/admin/network/wireless Bex & eo @
Width Operating frequency MHz Maximum transmit power driver default y - Current power: unknown eless radio may use. Depending on regulatory requirements and wireless usage, the actual transmit power may be
@ Specifies the maximum transmit power the w reduced by the driver. Interface Configuration General Setup | Wireless Security Advanced Settings Mode | Client ESSID OpenWrt BssiD Network | wwan:
@ Choose the network(s) you want to attach to this wireless interface or fill out the custom field to define a new network. Dismiss:
(0) OpenWrt-Wireless-Lucl Xe ean A openwrt.lan/egi-bin/luci/admin/network/wir Wireless Overview Teer Generic 802.114 AGaL Device is not active Add |
SSID: OpenWrt | Mode: Client fae Interface has 6 pending changes
@ disabled Associated Stations Network MAC address Host Signal / Noise RX Rate / TX Rate No information available Save & Apply Save Powered by LuC! Master (git-22.058.70382-d29400e)
(0) OpenWrt-Wireless-Lucl Xe ean a work/wire Jan/cai-bin/luci/admin/
22 | openw REFRESHING UNSAVED CHANGES: 18 BE isterfaces Wireless Overview a aio Genera Resta Add |
Device is not ac]
SSID: OpenWrt | Mode: Client Disable CRT [Renee |
disabled a Interface has 6 pending changes Associated Stations Network MAC address Host Signal / Noise RX Rate / TX Rate No information available Save & Apply Save Powered by LuCi Master (oit'22.058.70382-429400e) Bperrlen (co binfiucl adr niny petvorenceurar
) OpenWet-Interfaces-tucl Xe Va x C f A #2 | openwrtlan/cgi-bin/luci/admin/network/network aerwr BROOD:
REFRESHING UNSAVED CHAN Devices | Global network options Interfaces Protocol: Static address Uptime: 0h 13m 21s MAC: 00:C0:CA:B0:C6:E2 RX: 773.53 KB (7578 Pkts.) Restart | Stop [BBL ociere |
TX: 1.72 MB (4401 Pkts.) IPvd: 192.168.1.1/24 IPv6: fd02:770b:3a0::1/60
= Protocol: DHCP client eT cat Ea at await Interface has 2 pending change Add new interface. Save & Apply Save Powered by LuC! Master (git-22.058.70382-d29400e) x +
openwrtlan/c Add new interface.. Name Relay Prot Unmanaged Static addr a senwrt.lan/egi-bin/luci/admin/n Add new interface.. Name Protocal Rel ork/ne
(9) OpenWrt Interfaces -Lucl Xe ean A
) e openwrt.lan/egi-bin/luci/admin/network/network Interfaces RELAY Advanced Settings Firewall Settings | DHCP Server Status | Device: Relay "Relay RX: 0 B (0 Pkts.) TX: 0B (0 Pkts.) Protocol | Relay bridge Bring up on boot Local IPv4 address
@ Address to access local relay bridge 2en networks Dismiss (ES I [eJenwan:
Interfaces RELAY General Settings Select unspecified to remove the interface from the w zone and attach Dismiss Interfaces RELAY Select unspecified to remove the interface from the w zone and attach REFRESHING UNSAVED CHANGES: &
Interfaces Devices Global network options Interfaces RELAY Protocol: Relay bridge = =
Se (5m) interface has 4 pending changes Restart Stop BL ose Protocol: Static address Uptime: Oh 7m 4s MAC: 00:C0-CA:B0:C6:E6 <=
RX: 747.56 KB (5921 Pkts.) Restart | Stop |e Delete TX: 999.81 KB (3489 Pkis.) | cose |
IPva: 192.168.1.1/24 IP v6: 490:40f1:c6aa:-1/60 Protocol: DHCP client woman Uptime: Oh 1m 18s MAC: 00:C0:CA:B0:C6:E8 2 RX: 5.62 KB (44 Phts.) een acon ree wannre80211 TX: 196.10 KB (365 Pkts.) IPv4: 192.168.2.248/24 Add new interface. A Fz | 192.168.1.1/cgi-bin/luci/admin/network/network Interfaces LAN r General Settings Advanced Settings Firewall Settings || DHCP Server General Setup Advanced Settings IPv6 Settings _ IPv6 RA Settings Lease time
WHisable DHCP for this interface 100
@ Lowest leased address as offset from the network address. 150
@ Maximum number of leased addresses. 12h Expiry time of leased addresses, minimum is 2 minutes ( 2 Dismiss CO A FHS | 192.168.1.1/cgi-bin/luci/admin/network/network Interfaces Devices | Global network options Interfaces C wlannre80211 Protocol: Relay bridge Interface has 4 pending changes Protocol: Static address Interface has 2 pending changes Protocol: DHCP client Uptime: Oh 6m 3s MAC: 00:C0:CA:B0:C6:E8 RX: 15.41 KB (130 Pkts ) TX: 797.95 KB (1818 Pkts.) IPva: 192.168.2.248/24 Restart Restart Restart Stop Delete Stop Delete Stop Delete in/luci/admin/network/network
- Wireless - Luc CQ Az x +
openwrt.lan/cgi-bin/luci/admin/network/wireless Wireless Overview Generic 802.114 radiod Channel:
| Bitrate: 6 Mbit/s SSID: OpenWrt | Mode: Client ul -58/-92 dBm Associated Stations Network MAC address 00:C0:CA:B0:C6:E8 Client OpenWrt (wlannres0211) Powered by LuC! Master (git-22.058.70382-d29400e) BSSID: 00:C0:CA:B0:C6:E4 | Encryption: None Host 2 Signal | Noise a REFRESHING Restor ER Disable [EEMB[ Remove RX Rate / TX Rate 6.0 Mbit/s, 20 MHz 6.0 Mbit/s, 20 MHz
| 192.168.1.1/cgi-bin/luci/admin/network/network Bere & ao REFRESHING UNSAVED CHAI Interfaces mre) Protocol: Relay bridge
& ow) Interface has 4 pending changes Restarts Siep Protocol: Static address Uptime: Oh 4m 26s es) MAC: 00:C0:CA:B0:C6:E6 wo @) RX: 761.90 KB (5347 Pts.) Restart || Stop Delete |
bran TX: 112 MB (4087 Pits.) Iva: 192.168.1.1/24 IPv6: fdef894d:4b0a":1/60 Protocol: DHCP client Uptime: 0h 1m 41s m MAC: 00:C0:CA'B0:C6:E ese: | St bs RX: 221.95 KB (657 Pkis ) wenneseetl TX: 208.10 KB (572 Pkts.) IPv: 192.168.2.248/24
\dd new interface. Interfaces WWAN settings Advanced Setting:
ign firewall-
i-bin/luci/admin/net Interfaces WWAN General Settings Advanced Settings sign firewall want to assign to this interfa unspec id to define a new zone and atta LED Configuration Name Lep| Tigger wan ce x
@ ew
(0) OpenWrt - Backup / Flash Fin ean A egi-bin/luci/admin/syster/flash 192.168.1. Actions | Configuration Backup Click "Generate archive" to download a tar archive of the current configuration files Restore To restore configuration files, you can upload a previously generated backup archive here. To reset the firmware to its intial state, click "Perform reset (only possible with squashfs images). Restore backup ([UERERRIE
@ Custom files (certificates, scripts) may remain on the system. To prevent this, perform a factory-reset first Save mtdblock contents Click "Save mtdblock to download specified mtdblock file. (NOTE: THIS FEATURE IS FOR PROFESSIONALS! ) Choose mtdblock | qspi-config v Download mtdblock save mtdblock Erasing. Om : guration partion now and will reboot itself when finished OpenWet -
cq a 2 sA/egi-bin/luci Authorization Required Username root