EID10 Alpha USER MANUAL V1.0 ENGLISH ID Secure LLC Copyrights The products described in this document may include copyrighted computer programs. Laws in countries preserve for certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted computer programs contained in the products described in this document may not be copied or reproduced in any manner without the express written permission. 2023 ID Secure LLC All Rights Reserved No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission. Furthermore, the purchase of our products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications, except for the normal non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Disclaimer Please note that certain features, facilities, and capabilities described in this document may not be applicable to or licensed for use on a particular system, or may be dependent upon the characteristics of a particular mobile subscriber unit or configuration of certain parameters. Please refer to your contact for further information. 2 Table of Contents Copyright Table of Contents Overview Getting Started Using the NFC Using the Fingerprint Reader 2 3 4 6 8 9 WITH following PART two harmful 15 THE OF conditions:
interference, FCC RULES. and information compliance DEVICE FCC THIS Operation This
(1) This
(2) Note:
limits This may which This are equipment cause case is device device subject may must COMPLIES the to not cause accept has provide equipment to generates, designed any been uses, interference tested reasonable can and received, found to protection radiate and comply against interference including limits with for the interference harmful if and, frequency radio that a cause may digital A Class the when installed not in equipment undesired device, equipment used residential operation. part to operated a in accordance to likely pursuant is in area and is a FCC of the 15 commercial with the cause harmful Rules. environment. These instruction manual, interference in harmful user the interference be will required radio to communications. the correct interference Operation his at to energy of own this expense. Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC rules. This appliance and its antenna must not be located together or operated in conjunction with any other antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the antenna and individuals for this appliance to satisfy the RF exposure requirements. 3 Overview - Specification E N G L I S H Dimensions 78mm/3.07inch(W) x 112mm/4.41inch(H) x 30mm/1.18inch(D) General Characteristics Weight 164g Communication C Type USB Host : USB2.0 High Speed / 18PIN (USB Client/Host) Fingerprint Reader DATA CAPTURE IB DANNO FAP 30 TFT PIV Certified Sensor Type : Light-emitting sensor (LES) TFT camera Resolution : 500 ppi Gray Scale : 256 grayscale dynamic range Image Size : 400W x 500H pixels Supported Image Formats : RAW, JPEG2000, BMP, PNG, WSQ FBI Certification / Image Certifications : PIV 071006, FIPS 201, FAP 30 Speed : Minimum frame rate > 10FPS Capture Types : Single-finger flat HID RFID Reader HID OMNYKEY 5127CK-MINI 13.56 HF / 125K LF RFID ISO14443A/B ISO15693, FeliCa (IDm), CEPAS (CSN) Broad Credential Support NFC support for Mobile devices Dual frequency allowingsimultaneous support f or HF and LF credentials HID Prox, Indala and EM Prox,iCLASS, iCLASS SE , iCLASS Seos , MIFARE Classic , MIFARE DESFire EV1 iCLASS SE Processor Provides support for processing of PACS data and secure keystorage and communication User Environment Operating Temp
-0 ~ 50 (-32 ~ 122) Storage Temp
-20 ~ 60 (-4 ~ 140) Humidity Non-condensing, 93%
Drop 1.5m (5ft.) Compatible Device RP1500, RP1600, RP1600X 4 Overview Package / Device Features E N G L I S H B F B C A D B E A. Device IO Connector B. Device Locker C. Fingerprint Reader D. Cradle IO Connector E. HID RFID Reader F. USB C connector EID10 Alpha 5 Getting Started - Installing device E N G L I S H Installing the device Attach the EID10 Alpha to the device as shown picture. Insert the device down until the device latch snaps into place. Removing the device Pushing the lockers on both sides of EID10 Alpha, pull the device out from the EID10 Alpha. PUSH 2. PULL 6 Getting Started - Charging & Cradle Interface E N G L I S H A. Device charging status LED
- OFF : Not charging
- Red LED : Charging
- Green LED : Fully charged B. Spare battery charging status LED
- OFF : Not Charging
- Red LED : Charging
- Green LED : Fully Charged
** If the LED is off when the device or the sp are battery was mounted. Make sure that RP1 600X/EID10PLUS is inserted correctly in the c radle or RP1600X/EID10 Alpha is connected t o a power source. A B 7 Using the NFC E N G L I S H Since HID RFID antenna is integrated in the re ar side of the EID10 Alpha, read the contactles s card as shown. NFC reading distance depends on the Card type. 8 Using the Fingerprint Reader E N G L I S H When reading a fingerprint, you need to touch finger on t he outside of the fingerprint reader sensor shown in the i mage (orange color) to read. 9 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 RF, utilisateurs peut obtenir l'information anadienne sur l'exposition et la conformit de RF. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps.