ELECTRONIC MICRO ELECTRONIC INNOVATIVE PRODUCTS Understand - Analyse Design - Evolve Thank you for purchasing Biothentic. Manufacturer: id3 Semiconductors www.id3semiconductors.com Kit reference: 082G352A This kit includes :
1 Biothentic smart card reader 1 Biothentic USB dedicated cable 1 Biothentic Software Application CD ROM Security Instruction The Biothentic was designed to be plugged to USB 1.0 or 2.0 host products only. Installation Follow CD ROM instruction before connecting the biothentic reader. Cable:
The provided cable is compliant with USB specifications. This was designed and qualified to work with biothentic and to meet European and US reglementations. You shouldnt use any other cable type. SAM installation / replacement:
(Specific Application Module) The SAM operations are reserved to security officers . In order to install or remove a SAM :
1 : Disconnect the Usb cable 2 : Download ESD by touching the biothentic USB plug with your finger. 3 : Open the SAM plastic door 4 : unlock the SAM holder 5 : insert / remove the SAM 6 : close and lock the SAM holder 7 : close the plastic door. Warning Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment Repairs Repairs should only be performed by qualified technicians only. During warranty period, the product should be returned to id3 semiconductors official distributor for repair purpose. Warranty voids if the product is not properly used or if installation instructions are not respected. Waste of Electric & Electronic Equipments :
As an Electronic Equipment, Biothentic should not be thrown into a waste container !
European Directive 2002/96/EC Orders to have EEE recycled. In order to have this product recycled, please contact your Biothentic distributor. Keep these safety instructions id3 Semiconductors EC DECLARATION OF CONFORMITY We 5 rue de la Verrerie F-38120 Le Fontanil Cornillon FRANCE Declare under sole responsability that the 08G352A Biothentic fingerprint and smart card reader meets the intent of the European directives. Compliance was demonstrated to the following specifications as listed in the Official Journal of the European Communities:
EMC Directive 89/336/EEC EN55022 Class B (1998) IEC 61000-4-2 - 1996+A1(1998)+A2(2001) IEC 61000-4-3 - 1996+A1(1998)+A2(2001) IEC60950-1:2001 Security Directive 73/23/EEC FCC COMPLIANCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Jean-Louis Revol CEO Cr le 07/10/2005 11:04 Page 1/1 id3 Semiconductors - 5, rue de la Verrerie - F 38120 Le Fontanil Cornillon RCS Grenoble B 377 846 951 APE 321C - SAS au capital de 200.000 XSPC5K1420.doc Tel : +33 (0)4 76 75 75 85 - Fax : +33 (0)4 76 75 52 30 WEB:http://www.id3semiconductors.com - Email : contact@id3semiconductors.com