FCC ID: 2AZEK-IDWC Wireless Charger

USER MANUAL WIRELESS CHARGER IDEAL OF SWEDEN AB. All rights reserved. The product, packaging, logo and wordmark are intellectual properties of IDEAL OF SWEDEN AB. The use of the QI-logo and wordmark is under license. Manufactured by IDEAL OF SWEDEN AB. Gamla Rdstugugatan 33, 602 24 Norrkping, Sweden Produced in China. PRODUCT SPECIFICATIONS CONNECTING & CHARGING 1. Product standard: Qi standard V1.2.4 1. Connect the supplied cable to your wireless 2. Output power: 5W/Supports up to 10W 3. Input voltage/current: 5V/2.1A, 9V/1.67A 4. Charging voltage/current: 5V/1A, 9V/1.1A charger. 2. Connect the USB end into any computer or optional wall head (must be UL or ETL). 3. Once plugged in, you will see a white LED-

5. Charging frequency: 110-205 kHz light turn on, then off. 6. Charging distance: 10 mm 4. Place your smartphone on the charger. 7. Maximum RF output power: 33.83 dBuA/m at 3 m distance. USER GUIDE 1. This product must be used as advised, other wise it can cause a fire, explosion or other dangers. IDEAL OF SWEDEN has no respon sibility in case of misuse or use not compliant with the product instructions. 2. Do not place any products other than specified smartphones on the Qi charger, as this can cause damage to your charger. 3. Connect the Qi charger to an accessible place for easy disconnection. 4. Connect the Qi charger to an easily accessible place for easy disconnection. 5. This product is compatible with Qi wireless charging standard V 1.2.4 5. The white LED-light will turn on; your phone is now being charged. If you do not see a white LED-light, please move the phone over the Qi charger until you see a steady white LED-light. 6. Allow 4-5 hours for a complete charge. SAFETY MODIFICATION 1. Do not modify, disassemble, open, drop, crush, puncture or shred the Qi charger. 2. When using the Qi charger, keep it away from flammable materials. 3. Keep the Qi charger away from high (> 45C 104F) and low (< -20C -4F) temperature environment. 4. Do not expose the Qi charger to rain or water. 5. To prevent heat build-up, keep the Qi charger away from fire, heat and sunlight. 6. Disconnect the Qi charger from the power outlet once you are done charging your device. 7. This product is not a toy; keep it away from children. 8. If the QI charger does not work as described or otherwise, as expected, shows any signs of interference with the product being charged or shows signs of being overheated, immediately unplug the Qi charger and remove the charging device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FFC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC STATEMENT

*This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equip-

ment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

* This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. The content of this document is for information purposes only. IDEAL OF SWEDEN reserves the right to change this information at any time without prior notice.

WIRELESS CHARGER Input: DC 5V/2.1A, 9V/1.67A Output: 10W (max) / Fast charging FCC ID2AZEK-IDWC Made in China PO number:1002699 ARTICLE number:IDWCTE22-407 WIRELESS CHARGER Input: DC 5V/2.1A, 9V/1.67A Output: 10W (max) / Fast charging FCC ID2AZEK-IDWC Made in China PO number:1002699 ARTICLE number:IDWCTE22-408 WIRELESS CHARGER Input: DC 5V/2.1A, 9V/1.67A Output: 10W (max) / Fast charging FCC ID2AZEK-IDWC Made in China PO number:1002699 ARTICLE number:IDWCTE22-409 WIRELESS CHARGER Input: DC 5V/2.1A, 9V/1.67A Output: 10W (max) / Fast charging FCC ID2AZEK-IDWC Made in China PO number:1002699 ARTICLE number:IDWCTE22-411

TCB Authority to Act as Agent Number:

Revision:

Effective date: Oct 8, 2021 MS-0045317 0 Authority to Act as Agent Date: __2022-07-22____________ TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern:

I appoint ___ TV Rheinland (Shenzhen) Co., Ltd._ to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with iDeal of Sweden AB and Gamla Rdstugugatan 33, Norrkoping, Ostergotland 60224, Sweden For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Agency Agreement Date:

____2023-07-22_______________ Agreement is valid for 12 months from the above date. ___________________ _____ Tamara Ublova ______

(Print name) ____ Production and Quality manager ______ 0707109570

(Title)

(Telephone) Thank you, By:

(Signature) On behalf of:

iDeal of Sweden AB

(Company Name) Page 1 of 1

Confidentiality Letter Date: 22 July 2022 Subject: Confidentiality Request for FCC ID: 2AZEK-IDWC Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Part List/Tune-Up Procedure Schematics Test Setup Photos Users Manual iDeal of Sweden AB has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. Sincerely, By:

(Signature/Title) Tamara blov

(Print name)