PATNEON COOL GRAY 10 PATNEON 376 DIELINE 156mm 75mm 75mm 75mm 75mm 75mm R 1 In the box Charge Remote Remote Connect Taillight to your computer or external power bank with cable provided. LOCK Press LOCK button once, Taillight will sound an ALERT 3 times. Taillight is now armed and you will hear another ALERT sound after 3 seconds. If distrubed afterwards, the alarm will sound. UNLOCK Press UNLOCK button once and a single long ALERT will sound. This signals the exit of LOCK mode. USB Charging Cable Taillight
(Optional) Saddle & Seat Post Bracket Remote Control &
Bracket
(1x) LG Hex Bolt
(1x) MED Hex Bolt
(2x) SM Hex Bolt
(1x) LG Hex Tool
(1x) SM Hex Tool
(1x) Adhesive Pad
(2x) Zip Ties or When Taillight is charging, the light will turn on. When it is fully charged, the light will turn off. PUSH!
Press the release hook and remove the remote control to access remote buttons. TRIGGER ALERT When in LOCK mode and motion is detected, Taillight will generate a loud ALARM briefly. If motion is detected again within the next 10 seconds, an ALARM will sound nonstop for 30 seconds, and then return to LOCK mode. HORN Press and release HORN button to receive 3 short horn tones. Press and hold the button to receive 3 short and a long horn tones. FLASH When Taillight is not in LOCK mode, press FLASH button to cycle through each of the FLASH Modes. 1 2 3 4 Taillight Operation Taillight Installation Taillight Installation Remote Installation Wireless / Multifunction Bicycle Taillight Quick Start Guide
?
Help & Warranty Help:
For more information and support on this product, please visit our website. Red Button Press to cycle through different Flash modes (same function as remote FLASH button). OPTION 1: Saddle Mount OPTION 2: Seat Post Mount Handle Bar Mount 1 Slide open saddle mounting bracket. 1 Secure seat post mounting bracket with supplied MED Hex Bolt and LG Hex Tool. 1 Attach adhesive pad to the bottom of mounting bracket. www.ideminc.com/support Warranty:
This product is covered by a warranty for a period of one
(1) year from the date of original purchase. For more information, please visit our product website.
!
CAUTION Hearing Damage:
Do not place ringing alarm or activate alarm near ears. FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not accor in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an autlet on a circuit different from that to which the receiver is connectec. Consult the dealer or an experienced radio/TV technician for help. FCC-ID: 2AMVD-L1R 2017 IDEM, Inc. All resgistered logos and trademarks property of the respective owners. Mode 1 2 3 4 Pattern Burst Flash Fast Flash Slow Flash Taillight is off Flash/Sec. 3 2 1 0 2 Position bracket under bike saddle. Brackets may also be installed upside down. 2sec. 3 Tighten bracket with supplied LG Hex Bolt and LG Hex Tool. Blue Button When there is a malfunction between Taillight and remote control, press for 2 seconds and Taillight will sound an ALERT. Press any key on the remote control, and Taillight will sound an ALERT 2 times confirming the completion of pairing. 4 Slide Taillight onto mounting bracket. Secure Taillight to the bracket with a supplied SM Hex Bolt and SM Hex Tool. When the remote control is lost, contact customer support. Click!
2 Slide Taillight onto mounting bracket. Secure Taillight to the bracket with a supplied SM Hex Bolt and SM Hex Tool. 2 Insert cable ties through the mounting bracket. Click!
3 Place the bracket with adhesive pad over the handle bar. Pull cable ties tightly to secure the remote in place. Trim excessive cable ties if needed. Pull & Tighten!
8 5 7 6