FCC ID: UFW-AM201 GPR AM201

GPR AM201 Version 1.0 User Manual IDS Geo Radar Srl MNG/2022/011 Rev. 1.0 User Manual AM201 Ver. 1.0 User Manual Mod: MDM/011/M2 Rev 6 This Manual is intended to be used solely by authorized user of IDS GeoRadar Systems. It is specific for internal business purpose only. If you are not an authorized user, you are NOT allowed to read this Manual and you must return it to IDS GeoRadar as soon as possible. Access to and use of this Manual is also provided subject to the acceptance of the Disclaimer set out below. Legal Notices Use of the Manual Disclaimer About the Manual This Manual has been drafted by IDS GeoRadar with the due care in order to ensure the accuracy and completeness. However, please note that no warranty is provided about the fact that the Manual will be free from error or omission and about the accuracy and/or fitness to the purpose of any information contained herein. Any representation and/or statement contained herein has been written in good faith and on the basis that, due to negligence, lack of care or otherwise, IDS GeoRadar is not liable for any loss, including direct, indirect or consequential losses, in contract or in tort for any misstatement or omission contained herein which has occurred or may occur with reference to any representation and/or statement contained in the Manual. User shall also acknowledge that some information contained in the Manual may not be up to date. IDS GeoRadar may amend the information contained in the Manual from time to time and IDS GeoRadar shall not be deemed liable in the event that damages arise with reference to changed circumstances or other information which may affect the accuracy of any information contained in this version of the Manual. About the Product All products designed, produced and distributed by IDS GeoRadar, its Subsidiaries, Affiliated and authorized Distributors (Products) shall not be used, in the design, development, production or use of chemical, biological, nuclear ballistic weapons. Buyer/ User will defend, indemnify and hold IDS GeoRadar harmless against any liability (including attorneys fees) for non-compliance with the terms of this paragraph. If IDS GeoRadar requires that Buyer/User shall carry out a training with reference to some Product categories, no operation or use of the Products shall be started before its designated Operator/s has got the User Certificate, as defined by IDS GeoRadar specific procedure which the Buyer confirms to know and accept. For Products which include specific Operational software with automatic data processing and analysis Tools, e.g. RockSpot, IBIS Products; Hydra Products, User shall be aware that the results provided by these Tools may be not error free. User that completely relies on the outcomes provided by these Tools only, does it at his own risk. In no event IDS GeoRadar shall be liable for special, direct, indirect, incidental, exemplary, punitive or consequential damages including, but not limited to, loss of profits or revenue, caused by the missed or incomplete observance of the instructions and prescriptions for the use of the Products, either separately or in combination with other products. This paragraph provides only a non-exhaustive summary of the full Product disclaimer. Please see the full Product disclaimer included into the relevant section of this Manual for detailed information. IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 1/ 19 AM201 Ver. 1.0 User Manual INDEX Mod: MDM/011/M2 Rev 6 1 INTRODUCTION .............................................................................................................................................................................................................................. 3 1.1 1.2 1.3 1.4 1.5 Purpose ................................................................................................................................................................................................................................. 3 Intended readership ............................................................................................................................................................................................................. 3 Authorization for use national restriction ......................................................................................................................................................................... 3 CE Marking ............................................................................................................................................................................................................................ 3 UKCA Marking ....................................................................................................................................................................................................................... 4 2 HOW TO READ THE MANUAL ......................................................................................................................................................................................................... 5 2.1 Manual Layout ...................................................................................................................................................................................................................... 5 SYMBOLS ............................................................................................................................................................................................................................... 5 2.2 3 SAFETY DIRECTIONS ........................................................................................................................................................................................................................ 6 3.1 3.2 3.3 3.4 3.5 3.6 Description............................................................................................................................................................................................................................ 6 Definition of Use ................................................................................................................................................................................................................... 6 Reasonably Foreseeable Misuse .......................................................................................................................................................................................... 6 Limits of Use ......................................................................................................................................................................................................................... 6 Responsibilities ..................................................................................................................................................................................................................... 6 Hazard of use ........................................................................................................................................................................................................................ 7 HOW TO ASSEMBLE AM201 ........................................................................................................................................................................................................... 9 HOW TO OPERATE AM201 GPR unit .............................................................................................................................................................................................. 9 TECHNICAL SPECIFICATIONS ......................................................................................................................................................................................................... 11 CARE AND TRANSPORT ................................................................................................................................................................................................................. 12 4 5 6 7 7.1 7.2 Cleaning Information .......................................................................................................................................................................................................... 12 Battery Removal Information ............................................................................................................................................................................................. 12 APPENDIX A DISCLAIMER...................................................................................................................................................................................................................... 13 APPENDIX B: CONFORMITY TO EUROPEAN REGULATION ................................................................................................................................................................... 15 APPENDIX C IMPORTANT NOTICE FOR THE US CUSTOMER ................................................................................................................................................................. 15 APPENDIX D IMPORTANT NOTICE FOR CANADIAN CUSTOMER ........................................................................................................................................................ 17 APPENDIX E CUSTOMER SUPPORT ....................................................................................................................................................................................................... 18 IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 2/ 19 AM201 Ver. 1.0 User Manual 1 INTRODUCTION 1.1 Purpose This guide describes the procedures to assemble each part of the AM201 GPR unit. This is intended to be a quick assembly reference guide, that helps you during transfer from the office to the jobsite. 1.2 Intended readership The intended reader of this manual should be the technician in charge of using the system that has undergone the IDS GeoRadar training for AM201. 1.3 Authorization for use national restriction The use of Stream T system may be subject to a license and/or an authorization by the Competent Ministry of the country where the system will be used. An individual license and restrictions are in place to date in the following European countries:

https://www.anfr.fr/en/broadcasting-authorisation/reseaux-

France:

professionnels/les-frequences-utilisees-a-titre-temporaire/les-systemes-

dimagerie-radar-de-type-gpr-wpr/

Germany:

https://www.bundesnetzagentur.de/SharedDocs/Downloads/DE/Sachgebie te/Telekommunikation/Unternehmen_Institutionen/Technik/Inverkehrbrin genvonProdukten/Schnittstellenbeschreibungen/OrtungsfunkOR/SSBOR_N N022.pdf?__blob=publicationFile&v=4 Portugal: https://www.anacom.pt/render.jsp?categoryId=389647 Romania: https://www.ancom.ro/radio-spectrum_2749 Mod: MDM/011/M2 Rev 6 Spain: https://www.boe.es/diario_boe/txt.php?id=BOE-A-2011-19146 Sweden:

https://www.pts.se/sv/bransch/radio/radiotillstand/ansokningshandlingar/

Liechtenstein and Switzerland:

https://www.bakom.admin.ch/bakom/en/homepage/frequencies-and-

antennas/frequency-use-with-or-without-licences/radiocommunication-

licences-in-general.html For more details with reference to the restriction, please refer to the following website:

ECO Frequency Information System (cept.org) CH ES LI RO DE FR PT SE 1.4 CE Marking This equipment complies with the essential requirements and other relevant provisions of Directive 2014/53/UE. The full Declaration of its Conformity can be found either on the CD or a separate document included with this product. IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 3/ 19 Mod: MDM/011/M2 Rev 6 AM201 Ver. 1.0 User Manual This is a Class A product. In a domestic environment it may cause radio interference. If so, the user may need to take adequate measures. 1.5 UKCA Marking This equipment complies with the essential requirements of the Radio Equipment Regulations 2017 (S.I. 2017/1206). The full Declaration of its Conformity can be found either on the CD or a separate document included with this product. requirements Licensing https://www.ofcom.org.uk/manage-your-

licence/radiocommunication-licences/licensed-short-range can be in UK found here:

IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 4/ 19 Mod: MDM/011/M2 Rev 6 DANGER, WARNING, CAUTION and NOTICE are standardized signal words for identifying levels of hazards and risks related to personal injury and property damage. For your safety it is important to read and fully understand the table below with the different signal words and their definitions. Supplementary safety information symbols may be placed within a warning message as well as supplementary text. Note text/to keep in mind Tip text AM201 Ver. 1.0 User Manual 2 HOW TO READ THE MANUAL 2.1 Manual Layout This manual is meant to be a quick assembly reference guide, that helps you during transfer from the office to the jobsite, for the AM201 GPR unit. 2.2 SYMBOLS Warning messages are an essential part of the Safety Concept of the instrument. They appear wherever hazards or hazardous situations can occur. Type Description WARNING DANGER CAUTION Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation or an unintended use which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation or an unintended use which, if not avoided, may result in minor or moderate injury. Warning messages:

make the user alert about direct and indirect hazards concerning the use of the product. contain general rules of behaviour. For the users safety, all safety instructions and safety messages shall be strictly observed and followed. Therefore, the manual must always be available to all persons performing any tasks described herein. IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 5/ 19 AM201 Ver. 1.0 User Manual 3 SAFETY DIRECTIONS 3.1 Description The following directions enable the person responsible for the product, and the person who uses the equipment, to anticipate and avoid operational hazards. The person responsible for the product must ensure that all users understand these directions and adhere to them. 3.2 Definition of Use The intended use is geophysical surveying in the context of civil engineering applications. 3.3 Reasonably Foreseeable Misuse Use of the product without instruction. Use outside of the intended use and limits. Opening the product using tools, for example screwdriver, unless this is permitted for certain functions. Modification or conversion of the product. Use after misappropriation. Use of products with obvious damages or defects. Use with accessories from other manufacturers without the prior explicit approval of IDS GeoRadar s.r.l Inadequate safeguards at the working site. 3.4 Limits of Use Environment: Suitable for use in an atmosphere appropriate for permanent human habitation. Not suitable for use in explosive environments. Mod: MDM/011/M2 Rev 6 DANGER: Local safety authorities and safety experts must be contacted before working in hazardous areas, or close to electrical installations or similar situations by the person in charge of the product. 3.5 Responsibilities Manufacturer of the product - IDS GeoRadar s.r.l. is responsible for supplying the product, including the user manual and original accessories, in a safe condition. Person responsible for the product - The person responsible for the product has the following duties:

To understand the safety instructions on the product and the instructions in the user manual. To ensure that it is used in accordance with the instructions. To be familiar with local regulations relating to safety and accident prevention. To inform IDS GeoRadar s.r.l. immediately if the product and the application becomes unsafe. To ensure that the national laws, regulations and conditions for the operation of electromagnetics transmitters are respected. IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 6/ 19 AM201 Ver. 1.0 User Manual 3.6 Hazard of use NOTICE: Watch out for erroneous measurement results if the product has been dropped or has been misused, modified, stored for long periods or transported. Precautions:

Periodically carry out test measurements and perform the field adjustments indicated in the user manual, particularly after the product has been subjected to abnormal use and before and after of important measurements. DANGER: During surveys there is a danger of accidents occurring if the user does not pay attention to the environmental conditions around, for example obstacles, excavations or traffic. Precautions:

During operations, the user of the product must be fully aware of the existing dangers. DANGER: Because of the risk of electrocution, it is dangerous to use poles and extensions near electrical installations such as power cables or electrical railways. Precautions:

Keep at a safe distance from electrical installations. If it is essential to work in this environment, first contact the safety authorities responsible for the electrical installations and follow their instructions. Mod: MDM/011/M2 Rev 6 NOTICE: If the accessories used with the product are not properly secured and the product is subjected to mechanical shock, for example blows or falling, the product may be damaged. Precautions:

When setting-up the product, make sure that the accessories are correctly adapted, fitted, secured, and locked in position. Avoid subjecting the product to mechanical stress If the product is used with accessories, you may DANGER:

increase the risk of being struck by lightning. Do not use the product in a thunderstorm. DANGER: Inadequate securing of the working site can lead to dangerous situations, for example in traffic, on building sites, and at industrial installations. Precautions:

Always ensure that the working site is adequately secured. Adhere to the regulations governing safety and accident prevention and road traffic. IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 7/ 19 AM201 Ver. 1.0 User Manual it injury and rendering the environment NOTICE: If the product is improperly disposed of, the following can happen:

If polymer parts are burnt, poisonous gases are produced which may impair health. If batteries are damaged or are heated strongly, they can explode and cause poisoning, burning, corrosion or environmental contamination. By disposing of the product irresponsibly you may enable unauthorized persons to use in contravention of the regulations, exposing themselves and third parties to the risk of severe liable to contamination. RECYCLING The crossed out wheeled bin symbol shown on the equipment indicates that the product must be recycled separately from other waste at the end of its useful life. Separate waste disposal of this product at the end of its useful life will be organised and managed by IDS GeoRadar. When you decide to dispose of the equipment, contact IDS GeoRadar and follow the system that IDS GeoRadar has set up to permit the separate collection of the apparatus at its life end. Adequate separate collection for its subsequent recycling, treatment and environmental friendly disposal contribute towards avoiding any unnecessary effects on the environment and to health and favour the reuse or recycling of the materials that make up the equipment. Unauthorised disposal of this product as unsorted waste by its possessor will lead to an administrative penalty foreseen by national regulations. Mod: MDM/011/M2 Rev 6 CAUTION: High mechanical stress, high ambient temperatures or immersion into fluids can cause leakage, fire or explosions of the batteries. Precautions:

Protect the batteries from mechanical influences and high ambient temperatures. Do not drop or immerse batteries into fluids DANGER: During the transport, shipping or disposal of batteries it is possible for inappropriate mechanical influences to constitute a fire hazard. Precautions:

Before shipping the product or disposing of it, discharge the batteries by running the product until they are flat. When transporting or shipping batteries, the person in charge of the product must ensure that the applicable national and international rules and regulations are observed. Before transportation or shipping contact your local passenger or freight transport company. NOTICE: Only IDS GeoRadar authorized technical service are entitled to repair this product. IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 8/ 19 AM201 Ver. 1.0 User Manual 4 HOW TO ASSEMBLE AM201 AM201 GPR unit doesnt need any set-up or assembly. It appears as shown in Fig. 1, Error! Reference source not found. and Fig. 2. Mod: MDM/011/M2 Rev 6 Fig. 1 AM201 GPR unit Fig. 2 AM201 GPR unit 5 HOW TO OPERATE AM201 GPR unit On top of the cover of the AM201 GPR antenna unit there are 3 external connectors and 1 button (Fig. 3):

IN: 19 pin multipolar connector, providing power supply and Ethernet connectivity. OUT: 19 pin multipolar connector, providing power supply and Ethernet connectivity towards other AM201 modules. WHEEL: 4 pin connector, compatible with IDS Georadars survey kit. BUTTON: power button IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 9/ 19 AM201 Ver. 1.0 User Manual Mod: MDM/011/M2 Rev 6 Fig. 3 AM201 connections To correctly operate the AM201 antenna, the user must apply the following steps:

1. Connect on end of the multipolar cable provided with the unit to IN port (Fig. 4). Fig. 4 Connection of multipolar cable 2. Connect the other end of the multipolar cable to the junction box

(provided with AM201 unit) (Fig. 5). 3. Connect the junction box to a laptop via standard Ethernet cable

(having RJ 45 connectors) and battery cable (provided with AM201 unit) (Fig. 5). 4. Connect the battery cable to a 12V-12Ah sealed lead battery (Fig. 5). IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 10/ 19 AM201 Ver. 1.0 User Manual 12V lead battery Power ON 6 TECHNICAL SPECIFICATIONS Mod: MDM/011/M2 Rev 6 Junction box 19 pin connector + 4 pin connector 19 pin connector Ethernet cable Communication ports Ethernet 100 baseT 333 mm x 258 mm x 142 mm (h) Data Size Weight Power supply Power consumption Input ports Output ports Transmitting elements Receiving elements Environmental Measure 2.35 kg 12V DC 5.5 W 2 2 IP65 Operational temperature range

-20 - +40 C Fig. 5 - Connection of AM201 GPR unit 5. Press the power on button. 6. Operate the GPR unit, with the use of provided IDS Georadars software, according the survey the user intends to perform (please, refer to specific software product User Manual). Battery cable IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 11/ 19 AM201 Ver. 1.0 User Manual 7 CARE AND TRANSPORT 7.1 Cleaning Information 7.2 Battery Removal Information Mod: MDM/011/M2 Rev 6 IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 12/ 19 AM201 Ver. 1.0 User Manual APPENDIX A DISCLAIMER 1. Generals. i. The present Disclaimer applies to all products designed, produced and distributed by IDS GeoRadar s.r.l., its Subsidiaries, Affiliated and authorized Distributors (the Products). IDS GeoRadar s.r.l. reserves full ownership and intellectual property rights of any Information contained in this Disclaimer including Trade Marks and Graphics. No part of this Disclaimer may be used or reproduced in any forms without the prior written agreement of IDS GeoRadar s.r.l. In the event that any provision of this Disclaimer may be invalid, unlawful or incapable of being enforced by a rule of law, all other provisions shall, nonetheless, remain in full force and effect. Failure to either enforce or exercise any right, privilege, or legal remedy at any time, any provision contained in this Disclaimer, shall not be deemed a waiver of such provisions or right, remedy, or privilege. This Disclaimer shall be interpreted, governed, construed and enforced in accordance with the laws of Italy. User/Buyer hereby consents to the exclusive jurisdiction of Pisa. 2. Initial Precautions for Setting-up and Use of the Products. The User/Buyer, for setting-up and using the Products, shall consult the official documentation provided by IDS GeoRadar s.r.l. for the Products (Reference Documentation) and carefully ascertain the compliance with national laws and requirements, which may limit or even forbid their use. For Products which shall operate by circulation in Public Areas/Roads, with or without moving traffic, Buyer/User shall verify the approval of local authority and/or sites owner according to their specific procedures. IDS GeoRadar s.r.l. shall not be liable for any direct, indirect, special, incidental or consequential damages or injuries, including without limitation, lost revenues or lost profits, resulting by un-authorized use of the Products in Public Areas/Roads. Buyer/User further warrants:

o that these Products are not being used, in the design, development, production or use of chemical, biological, nuclear ballistic weapons. Buyer/

User will defend, indemnify and hold IDS GeoRadar s.r.l. harmless against any liability (including attorneys fees) for non-compliance with the terms of this article. ii. iii. i. ii. iii. iv. v. i. ii. Mod: MDM/011/M2 Rev 6 o That, if IDS GeoRadar s.r.l. requires that Buyer/User shall carry out a training with reference to some Product categories, no operation or use of the Products shall be started before its designated Operator/s has got the User Certificate, as defined by IDS GeoRadar s.r.l. specific procedure which the Buyer confirms to know and accept. For Products which include specific Operational software with automatic data processing and analysis Tools, e.g. the IBIS Products and Hydra Products, User shall be aware that the results provided by these Tools may be not error free. User that completely relies on the outcomes provided by these Tools only, does it at his own risk. In no event IDS GeoRadar s.r.l. shall be liable for special, direct, indirect, incidental, exemplary, punitive or consequential damages including, but not limited to, loss of profits or revenue, caused by the use of the Products, either separately or in combination with other products or relied upon the results provided by the above Tools. 3. Disclaimer for the Use of the Products. The User shall follow the instructions provided by IDS GeoRadar s.r.l. in its official Reference Documentation for the Product, in particular the Users Technical Manual which contains all the specific steps and recommendations for a correct setting-up and use of the Product. In no event IDS GeoRadar s.r.l. shall be liable for special, direct, indirect, incidental, exemplary, punitive or consequential damages including, but not limited to, loss of profits or revenue, caused by the missed or incomplete observance of the instructions and prescriptions for the use of the Products, either separately or in combination with other products, including but not limited to the following main aspects:

a. b. c. Use of IDS GeoRadar s.r.l. Products outside its limitation of use, without proper and adequate scientific/technical knowledge or without specific training. Use of results/outcomes of the measurements performed by the Product aimed to safety aspects without using adequate control procedures and assessment by skilled personnel. Opening of the Equipment (for HW Products) without express written authorization of IDS GeoRadar s.r.l.;

IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 13/ 19 Mod: MDM/011/M2 Rev 6 AM201 Ver. 1.0 User Manual d. e. f. g. h. i. j. Unauthorized changes and additions to the Products. Use of the Products connected to suspected non-working equipment or with equipment (mainly PC) having characteristics not in compliance with the required specifications of IDS GeoRadar s.r.l. not expressly authorized by IDS GeoRadar s.r.l.;

Poor or faulty operation of the electrical and telecommunication networks not directly managed by IDS GeoRadar s.r.l. or its delegates. Poor or faulty operation Software/Hardware of the third parties connected with IDS GeoRadar s.r.l. Equipment. Poor or faulty operation of the Products due to Software Virus which infected the Products after their delivery. Use of the Products which have encountered suspected manumissions, accidents, electrostatic shocks, flashes, fire, earthquake, flooding or other natural disasters or unexpected events. Use or storage of the Products outside the limits of the Operational Temperature Range specified by IDS GeoRadar S.r.l. IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 14/ 19 AM201 Ver. 1.0 User Manual APPENDIX B: CONFORMITY TO EUROPEAN REGULATION Mod: MDM/011/M2 Rev 6 APPENDIX C IMPORTANT NOTICE FOR THE US CUSTOMER FCC ID: UFW-AM201 This device complies with part 15 of the FCC Rules:

Operation is subject to the following conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, Including interference that may cause undesired operation Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Operation of this device is restricted to law enforcement, fire and rescue officials, scientific research institutes, commercial mining companies, and construction companies. Operation by any other party is a violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties. Coordination Requirements.

(a) UWB imaging systems require coordination through the FCC before the equipment may be used. The operator shall comply with any constraints on equipment usage resulting from this coordination.

(b) The users of UWB imaging devices shall supply detailed operational areas to the FCC Office of Engineering and Technology who shall coordinate this information with the Federal Government through the National Telecommunications and Information Administration. The information provided by the UWB operator shall include the name, address and other pertinent contact information of the user, the IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 15/ 19 AM201 Ver. 1.0 User Manual desired geographical area of operation, and the FCC ID number and other nomenclature of the UWB device. This material shall be submitted to the following address:

Notice Mod: MDM/011/M2 Rev 6 This device devices may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited. Frequency Coordination Branch., OET Federal Communications Commission 445 12th Street, SW Washington, D.C. 20554 ATTN: UWB Coordination

(c) The manufacturers, or their authorized sales agents, must inform purchasers and users of their systems of the requirement to undertake detailed coordination of operational areas with the FCC prior to the equipment being operated.

(d) Users of authorized, coordinated UWB systems may transfer them to other qualified users and to different locations upon coordination of change of ownership or location to the FCC and coordination with existing authorized operations.

(e) The NTIA/FCC coordination report shall include any needed constraints that apply to day-to-day operations. Such constraints could specify prohibited areas of operations or areas located near authorized radio stations for which additional coordination is required before operation of the UWB equipment. If additional local coordination is required, a local coordination contact will be provided.

(f) The coordination of routine UWB operations shall not take longer than 15 business days from the receipt of the coordination request by NTIA. Special temporary operations may be handled with an expedited turn-around time when circumstances warrant. The operation of UWB systems in emergency situations involving the safety of life or property may occur without coordination provided a notification procedure, similar to that contained in CFR47 Section 2.405(a)-(e), is followed by the UWB equipment user. IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 16/ 19 Mod: MDM/011/M2 Rev 6 Cet appareil contient des metteurs/rcepteurs exempts de licence qui sont conformes aux RSS(s) exempts de licence dInnovation, Sciences et Dveloppement conomique Canada. Lexploitation est soumise aux deux conditions suivantes :

1. Cet appareil ne peut pas causer dinterfrence. 2. Cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent provoquer un fonctionnement indsirable de lappareil. AM201 Ver. 1.0 User Manual APPENDIX D IMPORTANT NOTICE FOR CANADIAN CUSTOMER Canadian Requirements of RSS-220 for Ground Antennas IMPORTANT NOTE FOR THE CANADIAN CUSTOMERS IC Certification Number: 8991A-AM201 This device complies with the requirements of IC Standard RSS-220 This Ground Penetrating Radar Device shall be operated only when in contact with or within 1 m of the ground. This Ground Penetrating Radar Device shall be operated only by law enforcement agencies, scientific research institutes, commercial mining companies, construction companies, and emergency rescue or firefighting organizations. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. NOTE IMPORTANTE POUR LES UTILISATEURS CANADIENS Numro de certification : 8991A-AM201 Cet appareil est conforme aux exigences de la norme RSS IC-220 Cet quipement goradar doit tre utilis que lorsquil est en contact ou moins de 1 mtre du sol. Cet quipement goradar doit tre utilis que par des organismes d'application de la loi, des instituts de recherche scientifique, des socits minires commerciales, des entreprises de construction et de secours d'urgence ou les organisations de lutte contre les incendies. IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 17/ 19 Mod: MDM/011/M2 Rev 6 AM201 Ver. 1.0 User Manual APPENDIX E CUSTOMER SUPPORT The IDS GeoRadar Technical Support team is available to answer any question about:

general enquiries request of advertising material technical issues any other business As well as listening to your suggestions too. Please, feel free to contact us sending an e-mail to:

support.geo@idsgeoradar.com Or call the Number:

+39 050 8934 200 Customer Care Office Address:

IDS GeoRadar srl 56121 PISA ITALY A. Righi 6, 6 A, 8, Localit Ospedaletto IDS GeoRadar Srl User Manual MNG/2022/011 Rev. 1.0 18/ 19

cod. 953645 CE-FCC label antenna AM201 78 mm IDS GeoRadar Via A. Righi, 6-6A-8 56121 Pisa (PI) - Italy www.idsgeoradar.com m m 0 5 MODEL: AM201 P/N: 953648 S/N:

FCC ID: UFW-AM201 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. IC : 8991A-AM201 This device complies with the requirements of IC Standard RSS-220 Stampa a colori su PVC AP/HTS80 Uso esterno con laminazione PT/5. Linee di taglio in rosso Finestra interna con sola laminazione trasparente

Via A. Righi, 668-8 56121 Pisa (Pl) - Italy S 108 Georadar

| move: am201 PIN: 953648 SIN: 01022 000001

REQUEST FOR CONFIDENTIALITY IDS GeoRadar Headquarters Via A. Righi, 6, 6A, 8 56121 Pisa (PI) Italy Tel. +39.050.0989300 Fax +39.050.7912.130 info@idsgeoradar.com www.idsgeoradar.com Date: 08 July 2022 Subject: Confidentiality Request for: __UFW-AM201 __UFW-AE32HV Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual Inside the unit, electromagnetic absorbers cannot be removed without damage and will have to be Note: these materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. The devices pictured in the documents AM201-internal pictures.pdf and AE32HV-internal pictures.pdf are sealed and potted unit that cannot be opened after manufacturing without destroying the contents. Specifically in order to view inside the product to which this request refers, one would have to carry out the following steps:

Use a special key to remove the screws securing the cover. This special key is not available to the 1. general public. Moreover, these screws have to be removed in a specific order not to cause irreparable damages. The information on the removal order is available to IDS GeoRadar and to authorized repair centers only. 2. replaced with new ones when re-assembling. This material is custom built and not available to the public or to a competitor. 3. De-solder the transmitter AND the receiver from the antenna flares to initiate access to certain electronics of the antenna. Then carefully disconnect and withdraw the assemblies from the shield /construct assembly. When these steps are done improperly the electronics can be severely damaged. IDS GeoRadar has never released instructions on how to disassemble its units, and does not answer questions on how to do so. This information is kept internal to the company. If a unit arrives at the company's repair facility showing evidence of such tampering, the company does not repair it, but charges the customer for a new unit plus freight costs. The Commission's posting of the photographs as well as of the schematics and components list, would allow a competitor to bypass this difficult and expensive disassembly. From the photographs, a competitor can also estimate:

IDS GeoRadar s.r.l. - Codice Fiscale 02216580502 VAT n IT 02216580502 - RAEE N IT16060000009358 Legal office Via Carducci n. 32, 20123 Milano (MI) Italy Registered at the Milano Chamber of Commerce, R.E.A. 2115412 - Pec idsgeoradar@pec.it Share capital Euro 20.000 fully paid A company with a sole shareholder, subject to the coordination and control of Hexagon Geosystems Services S.p.a. Cornegliano Laudense (LO) Via Codognino 10, 26854, Cod. Fiscale 09430450966 1. the costs of manufacturing the printed circuit boards and mechanical housing;

2. the man-hours required to assemble the device;

3. any compatibility problems the manufacturer will have in designing new systems; and 4. the age of the electronic design (which gives valuable competitive information on upgrade and R&D efforts). Access to interior photographs would almost permit a competitor to conduct a complete reverse engineering, to the point of producing a schematic. We are also noting that The Commission has previously granted confidentiality under similar conditions to several applications concerning GPR devices: e.g. QF7350HS QF742600 QF7MINIXT QLA450MHZHDR QLA160MHZHDR QLA750MHZHDR QLA80MHZHDR We are also reminding that the unit will not be made available for sale to the general public. Marketing will be limited to law enforcement, fire fighting, emergency rescue, scientific research institutions, commercial mining companies, construction companies and those parties providing services to these entities pursuant to CFR 47, Part 15, Subpart F, 15.509 Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

____________R&D Manager_ Guido Manacorda

(Signature/Title)

(Print name) IDS GeoRadar s.r.l. - Codice Fiscale 02216580502 VAT n IT 02216580502 - RAEE N IT16060000009358 Legal office Via Carducci n. 32, 20123 Milano (MI) Italy Registered at the Milano Chamber of Commerce, R.E.A. 2115412 - Pec idsgeoradar@pec.it Share capital Euro 20.000 fully paid A company with a sole shareholder, subject to the coordination and control of Hexagon Geosystems Services S.p.a. Cornegliano Laudense (LO) Via Codognino 10, 26854, Cod. Fiscale 09430450966

IDS GeoRadar Headquarters Via A. Righi, 6, 6A, 8 56121 Pisa (PI) Italy Tel. +39.050 098 300 Fax

+39.050.7912.130 info@idsgeoradar.com www.idsgeoradar.com FCC AND IC AUTHORIZATION LETTER

(FCC ID: UFW-AM201 IC: 8991A-AM201) PRODUCT NAME: AM201 Date: 2022 July, the 8th To whom it may concern:

We, the undersigned, hereby authorize Wei Li at Advanced Compliance Lab, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Advanced Compliance Lab on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Advanced Compliance as our agent, we still recognize that we are responsible to:

a) b) documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

c) granted;

d) disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

make claims regarding certification only in respect of the scope for which certification has been do not use our product certification in such a manner as to bring the Certification Division into make all necessary arrangements for the conduct of the evaluation, including provision for examining comply with the relevant provisions of the certification program;

IDS GeoRadar s.r.l. - Codice Fiscale 02216580502 VAT n IT 02216580502 - RAEE N IT16060000009358 Legal office Via Carducci n. 32, 20123 Milano (MI) Italy Registered at the Milano Chamber of Commerce, R.E.A. 2115412 - Pec idsgeoradar@pec.it Share capital Euro 20.000 fully paid A company with a sole shareholder, subject to the coordination and control of Hexagon Geosystems Services S.p.a. Cornegliano Laudense (LO) Via Codognino 10, 26854, Cod. Fiscale 09430450966 use certification only to indicate the products are certified as being in conformity with specified ensure that any reference to our product certification in communication media such as documents, endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

keep a record of all complaints made known to the us relating to the products compliance with take appropriate action with respect to such complaints and any deficiencies found in products or f) standards;

g) h) brochures or advertising, complies with the requirements of the Certification Division;

i) requirements of the relevant standard and to make these records available to the Certification Division when requested;

j) services that affect compliance with the requirements for certification;

k) This authorization is valid until further written notice from the applicant. Regards, Guido Manacorda Director R&D document the actions taken. IDS GeoRadar s.r.l. - Codice Fiscale 02216580502 VAT n IT 02216580502 - RAEE N IT16060000009358 Legal office Via Carducci n. 32, 20123 Milano (MI) Italy Registered at the Milano Chamber of Commerce, R.E.A. 2115412 - Pec idsgeoradar@pec.it Share capital Euro 20.000 fully paid A company with a sole shareholder, subject to the coordination and control of Hexagon Geosystems Services S.p.a. Cornegliano Laudense (LO) Via Codognino 10, 26854, Cod. Fiscale 09430450966