Peach-E73
(mm) LED Peach-E73 7.3"
800 x 480
(EPD) 186.1 (L) x 133.1 (W) x 19.5 (D) IEEE 802.11b/g/n (2.4GHz Wi Fi, Bluetooth 5 (LE)) USB Type C 2 colors (, ) Power, Bluetooth, Reset 6 x AAA () 18 sec (25C typ.) 15C ~ 35C
-20C ~ 60C 20 NCC LP0002_3.8.2 3010 221 LCD EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your display products, please follow the guidance of your local authority, or ask the shop where you purchased the product. The mark on electrical and electronic products only applies to the current European Union Member States. Please follow the national guidelines for electrical and electronic product disposal. 4 Peach-E73
(UART mode) IEI Integration Corp. ditherPrint PC App LED QR code QR code MAC MAC QR code EPD LED
3 LED 24
: Peach-E73 *
3 :
10 :
: Wi-Fi mode
* 15 Peach-E73 USB Type-C IEI ditherPrint USB Type-C
(millimeters) 19.5 186.1 133.1 2 3 Specifications The technical specifications for the Peach-E73 are listed below. Peach-E73 Active Area Resolution Display Type Dimension (mm) Wireless Connector LED Buttons Battery Display Colors Image Update Time Best Optic Temperature Range Storage Temperature 7.3"
800 x 480 Electrophoretic displays (EPD) 186.1 (L) x 133.1 (W) x 19.5 (D) IEEE 802.11b/g/n (2.4GHz Wi Fi) Bluetooth 5 (LE) USB Type C 2 colors (blue, red) Power, Bluetooth, Reset 6 x AAA (not included in the product) BWRY 18 sec (25C typ.) 15C ~ 35C
-20C ~ 60C Peach-E73 Quick Start Guide
(UART mode) 4 Please download the full version user manual and ditherPrint PC app on the IEI Integration Corp. website. Front Panel The front panel of the Peach-E73 is a 4-color screen using Electrophoretic displays (EPD) technology. On the front panel, you can also find the status LED and the QR code that has the device's Unique number. Unique number QR code 4-color EPD Status LED The description of the Red LED indicator is listed below. Off: deep sleep / image display (print or slideshow) Solid Red: Standby Blink 3 times/sec: image or firmware transfer NOTE:
The image will be refreshed every 24 hours automatically when the device is in deep sleep mode. It is to maintain the image quality. There will be no refresh if the image is full white. Rear Panel The rear panel contains a battery cover, and three buttons with different functions described below. Buttons Description Power button Short press: wake up Peach-E73 from deep sleep mode*
Long press 3 sec.: stop slideshow in USB mode and go to deep sleep mode Long press 10 sec.: factory reset
(Caution! All settings and data will revert to factory default) Bluetooth button Short press: switch to Wi-Fi mode Reset button Short press: reboot Peach-E73 from any status (all settings and data will remain unchanged after reset)
* When provided with battery/USB power and set with no slideshow, the Peach E73 will go into deep sleep mode after pending for 15 sec. 2 Battery cover Reset button Power button Bluetooth button Bottom Panel The bottom panel of the Peach-E73 has a USB Type-C connector to connect with a power source or a PC for image display setup. Refer to the ditherPrint user manual for how to setup display image. USB Type-C connector Dimensions (millimeters) The physical dimensions are shown below:
19.5 186.1 133.1 3 Federal Communications Commission (FCC) Statement 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement:
This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference, and This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. Caution: Exposure to Radio Frequency Radiation To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Attention: exposition au rayonnement radiofrquence Pour se conformer aux exigences de conformit RF canadienne l'exposition, cet appareil et son antenne ne doivent pas tre co-localiss ou fonctionnant en conjonction avec une autre antenne ou transmetteur. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. Pour se conformer aux exigences de conformit CNR 102 RF exposition, une distance de sparation d'au moins 20 cm doit tre maintenue entre l'antenne de cet appareil et toutes les personnes. CAUTION:
1. Image display requires and depends on a host system to provide images and manage them. 2. The Peach-E73 must be installed and operated only by trained and qualified personnel. Maintenance, upgrades, or repairs may only be carried out by qualified personnel who are familiar with the associated dangers. 3. The distance between the product and the human body is more than 20cm. Outside the European Union If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method. Within the European Union The device that produces less waste and is easier to recycle is classified as electronic device in terms of the European Directive 2012/19/EU (WEEE), and must not be disposed of as domestic garbage. EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your display products, please follow the guidance of your local authority, or ask the shop where you purchased the product. The mark on electrical and electronic products only applies to the current European Union Member States. Please follow the national guidelines for electrical and electronic product disposal. 5 6