FCC ID: OMCBBICON14 Exercise Bike Console with Bluetooth Capability

417110 Users Manual Users Manual Model No. / PMN: 417110 Table of Contents Getting Started Maintenance And Troubleshooting:

Recycling Information:

Compliance Information:

2 2 2 3 1 Getting Started 1 Power up the device The device uses 3.3VDC. Usually, it is soldered on a brain board which is powered by 3 AA batteries. The onboard linear regulator converts to 3.3VDC. IMPORTANT: If the device has been exposed to cold temperatures, allow it to warm to room temperature before you power it up. Otherwise, you may damage the electronic components. Maintenance And Troubleshooting The device can be updated by a compatible JTAG/SWD Programmer. The programming header is on the brain board. The update process takes approximately 5 minutes and the device does not work during that process. Recycling Information This electronic product must not be disposed of in municipal waste. To preserve the environment, this product must be recycled after its useful life as required by law. Use recycling facilities that are authorized to collect this type of waste in your area In doing so, you will help to conserve natural resources and improve standards of environmental protection For information about safe and correct disposal methods, please contact your local city office or waste disposal office, or the establishment where you purchased this product 2 Compliance Information United States Compliance Information FCC ID: OMCBBICON14 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to computer or peripheral devices. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IMPORTANT: This device meets exemption requirements for Specific Absorption Rate(SAR) compliance Canada Compliance Information 3 IC: 3673A-BBICON14 HVIN: 417110 IC INFORMATION This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT: This device meets exemption requirements for exposure compliance CAN ICES-3 (B)/NMB-3(B) INFORMATIONS DE LA IC Cet appareil contient un ou des metteurs/rcepteurs exonors de licence conformes aux normes du ou des CNR dInnovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est assujetti aux deux conditions suivantes : 1. Cet appareil ne peut pas crer dinterfrences. 2. Cet appareil doit accepter toute interfrence, dont une interfrence qui pourrait entraner un fonctionnement indsirable de lappareil. IMPORTANT : Cet appareil rpond aux exigences dexemption pour la conformit dexposition. CAN ICES-3 (B)/NMB-3(B) 4

REV-

**Decals must be applied at a minimum of 50 degrees Fahrenheit. Proper adhesion will not occur at colder temperatures.**

439985

DESCRIPTION OF CHANGE DATE Decal shown at 100% of actual size Decal Process Decal Material Adhesive Application Printed Vinyl 4 mil vinyl or ICON approved equivalent 3M 300 LSE adhesive, or ICON approved equivalent Decal Colors Black-text White-background Dimensions 1.00 inches by 0.33 inches Alt. Process Silkscreen / Pad Print Console views shown at 65% of actual size RELEASE APPROVALS DOCUMENTATION:

CHRIS HOLTON DESIGN:

JOSHUA TUCKER ENGINEERING:

BRYAN LEE UPDATES:

DATE 8/24/21 8/24/21 8/24/21 TITLE: DECAL,FCC,IC ID PROJECT/MODEL: PFEX63919

ij 7 *| 1500 South 1000 West Mf I O Logan, UT 84321

& (035) 750-5000 HEALTH & FITNESS www, ieee tness.ceen Date 10/07/2021 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

DNB Engineering Inc. is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits We also declare that the information provided to the FCC is true and correct to the best of our knowledge

(47 CFR2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment This authorization expires one year from the current date (10/07/2021) NS 4 KE Joshua Tucker Compliance Engineer Telephone Number: (435)786-5420

6 Oct 2021 Atten: Director of Certification American Certification Body, Inc. 6731 Whittier Avenue, Suite C110 McLean, VA 22101 To Whom It May Concern Icon Health and Fitness is submitting the following product which shall contain an unlicensed radio transmitting device subject to US CFR 47 Part 15.247 Rules and Regulations and shall bear the FCC ID: OMCBBICON14 Model:417110 Les Payne (Agent for Icon Health and Fitness) Facility Manager DNB Engineering Inc 1100 E Chalk Creek Road Coalville, UT 84017

Request for Confidentiality Date: November 1, 2021 Subject: Confidentiality Request for: __FCC ID: OMCBBICON14 and IC ID: 3673A-BBICON14____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *1 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual ___ICON Health & Fitness has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __N/A__ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

__________________________ _C.L.(LES) Payne III (Agent for ICON) (DNB Eng)_______

(Signature/Title2)

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 041521-14