all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.16 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 1.16 MiB |
Montageanleitung RF-Identifikationssystem mit integriertem AS-i Slave Installation instructions RF-identification system with integrated AS-i slave Notice de montage Systme didentification RFID avec esclave AS-i intgr DE UKUK FRFR DTS125 9 0 0 2
5 0 6 0
3 5 1 4 0 7 Inhalt 1 Vorbemerkung .....................................................................................................4 1.1 Verwendete Symbole ....................................................................................4 2 Sicherheitshinweise .............................................................................................4 2.1 Allgemein ......................................................................................................4 2.2 Funkanlagen .................................................................................................5 2.3 Strung elektronischer und medizinischer Gerte ........................................5 3 Bestimmungsgeme Verwendung .....................................................................5 4 Funktion ...............................................................................................................5 4.1 Funktionsweise .............................................................................................5 4.2 Typenbersicht .............................................................................................6 5 Montage ...............................................................................................................7 5.1 Generelle Montagehinweise .........................................................................7 5.2 Hinweise zur ID-TAG Montage .....................................................................7 5.3 DTA10x .........................................................................................................8 5.3.1 Befestigung ...........................................................................................8 5.3.2 Montageabstnde .................................................................................8 5.3.3 Positionierung der ID-TAGs ..................................................................9 5.3.4 Ausrichtung der ID-TAGs ......................................................................9 5.3.5 Lese-/Schreibabstnde .......................................................................10 5.4 DTA20x .......................................................................................................10 5.4.1 Mechanischer Aufbau .........................................................................10 5.4.2 Aktive Flche ausrichten ..................................................................... 11 5.4.3 Befestigung ......................................................................................... 11 5.4.4 Montageabstnde ...............................................................................12 5.4.5 Positionierung der ID-TAGs ................................................................12 5.4.6 Ausrichtung der ID-TAGs ....................................................................13 5.4.7 Lese-/Schreibabstnde .......................................................................13 5.5 DTA30x .......................................................................................................14 5.5.1 Befestigung .........................................................................................14 5.5.2 Montageabstnde ...............................................................................14 5.5.3 Positionierung der ID-TAGs ................................................................15 5.5.4 Ausrichtung der ID-TAGs ....................................................................15 5.5.5 Lese-/Schreibabstnde .......................................................................15 5.5.6 Steckereinsatz drehen ........................................................................16 2 DE 6 Elektrischer Anschluss .......................................................................................17 6.1 Anschlussbelegung .....................................................................................17 6.2 Mindestabstand AS-i Leitung zum Gehuse ..............................................17 6.2.1 DTA10x ...............................................................................................17 6.2.2 DTA20x ...............................................................................................18 6.2.3 DTA30x ...............................................................................................18 6.3 UL-Zulassung .............................................................................................19 7 Anzeigeelemente ...............................................................................................19 7.1 Lesebetrieb (Grundeinstellung) ..................................................................19 7.2 Schreibbetrieb (nur DTA100, DTA200, DTA300) ........................................20 8 Betrieb ...............................................................................................................21 8.1 Grundeinstellungen im AS-i Netzwerk ........................................................21 8.2 Adressierung ...............................................................................................21 8.3 Analogwert-Reprsentation ........................................................................21 8.4 Belegung der Datenbits ..............................................................................21 8.5 Codewert-Darstellung durch Datenbits D16...D1 .......................................22 8.6 Zusatzfunktionen gem AS-i Profil 7.4 .....................................................22 9 Mae..................................................................................................................23 9.1 DTA10x .......................................................................................................23 9.2 DTA20x .......................................................................................................23 9.3 DTA30x .......................................................................................................24 10 Technische Daten ............................................................................................24 11 Wartung, Instandsetzung und Entsorgung .......................................................24 12 Zulassungen/Normen ......................................................................................24 12.1 Funkzulassungen .....................................................................................24 12.1.1 bersicht ..........................................................................................24 12.1.2 Europa ..............................................................................................24 12.1.3 Hinweise FCC (USA, Kanada) .........................................................25 12.1.4 China ................................................................................................25 12.1.5 Singapur ...........................................................................................26 12.2 EG-Konformittserklrung ........................................................................26 3 Vorbemerkung 1 Dieses Dokument gilt fr alle Gerte des Typs DTS125. Es ist Bestandteil des Gertes und enthlt Angaben zum korrekten Umgang mit dem Produkt. Dieses Dokument richtet sich an Fachkrfte. Dabei handelt es sich um Personen, die aufgrund ihrer Ausbildung und ihrer Erfahrung befhigt sind, Risiken zu erkennen und mgliche Gefhrdungen zu vermeiden, die der Betrieb oder die Instandhaltung des Gertes verursachen kann. Lesen Sie dieses Dokument vor dem Einsatz, damit Sie mit Einsatzbedingungen, Installation und Betrieb vertraut werden. Bewahren Sie dieses Dokument whrend der gesamten Einsatzdauer des Gertes auf. 1.1 Handlungsanweisung Querverweis Verwendete Symbole Wichtiger Hinweis Fehlfunktionen oder Strungen sind bei Nichtbeachtung mglich. Information Ergnzender Hinweis Sicherheitshinweise Allgemein 2 2.1 Befolgen Sie die Angaben dieser Anleitung. Nichtbeachten der Hinweise, Verwen-
dung auerhalb der nachstehend genannten bestimmungsgemen Verwendung, falsche Installation oder Handhabung knnen Beeintrchtigungen der Sicherheit von Menschen und Anlagen zur Folge haben. Der Einbau und Anschluss muss den gltigen nationalen und internationalen Normen entsprechen. Die Verantwortung trgt derjenige, der das Gert installiert. Das Gert darf nur von einer Elektrofachkraft eingebaut, angeschlossen und in Betrieb gesetzt werden, da die sichere Funktion des Gertes und der Anlage nur bei ordnungsgemer Installation gewhrleistet ist. Schalten Sie das Gert extern spannungsfrei bevor Sie irgendwelche Arbeiten an ihm vornehmen. 4 Bei Fehlfunktion des Gertes oder bei Unklarheiten bitte mit dem Hersteller in Verbindung setzen. Eingriffe in das Gert knnen schwerwiegende Beeintrchti-
gungen der Sicherheit von Menschen und Anlagen zur Folge haben. Sie sind nicht zulssig und fhren zu Haftungs- und Gewhrleistungsauschluss. 2.2 Funkgerte drfen generell nicht in der Nhe von Tankstellen, Kraftstoffdepots, Chemiewerken oder Sprengarbeiten benutzt werden. Keine entflammbaren Gase, Flssigkeiten oder explosive Stoffe im Bereich des Gertes transportieren und lagern. Funkanlagen DE Strung elektronischer und medizinischer Gerte 2.3 Der Betrieb kann die Funktionsfhigkeit von nicht ordnungsgem geschirmten elektronischen Gerten beeintrchtigen. Das Gert in der Nhe medizinischer Gerte ausschalten. Bei Strungen ggf. beim Hersteller des jeweiligen Gertes informieren. Bestimmungsgeme Verwendung 3 Das RF-Identifikationssystem DTS125 dient zum berhrungslosen Lesen und/
oder Beschreiben systemkonformer RFID-Transponder (ID-TAGs). Die Daten werden in digital codierte Werte gewandelt und der AS-i Steuerungse-
bene zur Verfgung gestellt (AS-i Master, Controller oder Host). Einsatzbereiche sind z.B.:
Materialflusssteuerung und -kontrolle in Fertigungslinien Lagermanagement durch automatische Lagerguterkennung Behltermanagement, Kommissionierung oder die Warenverfolgung Funktion Funktionsweise 4 4.1 Die ID-TAGs werden passiv betrieben, d.h. ohne Batterie. Die zum Betrieb not-
wendige Energie wird vom Lese-/Schreibkopf aufgebracht. Das physikalische Prinzip der Energiebertragung beruht auf der induktiven Kopplung. Die integrierte Antennenspule des Lese-/Schreibkopfes erzeugt ein ma-
gnetisches Feld, das zu einem Teil die Antennenspule des ID-TAGs durchdringt. Durch Induktion wird dort eine Spannung erzeugt die den Datentrger mit Energie versorgt. 5 ID tag energy data read/write head display HF and analogue circuit a n n e n a t controller and AS-interface AS-i master, controller or host Funktion (Beispiel Lese-/Schreibkopf DTA100 und ID-TAG E80301) 4.2 Typenbersicht DTA20x DTA30x Funktion Lese-/Schreibkopf Lesekopf Lese-/Schreibkopf Lesekopf Typbezeichnung DTS125 AARWASUS DTS125 AAROASUS DTS125 MCRWASUS DTS125 MCROASUS H x B x T [mm]
55 x 24 x 41 40 x 40 x 54 DTA10x Art.-Nr. DTA100 DTA101 DTA200 DTA201 6 Art.-Nr. DTA300 DTA301 Funktion Lese-/Schreibkopf Lesekopf Typbezeichnung DTS125 DCRWASUS DTS125 DCROASUS H x B x T [mm]
92 x 80 x 40 5 5.1 Montage Generelle Montagehinweise Bei der Montage von mehreren Systemen die Mindestabstnde zwischen den Lese-/Schreibkpfen beachten. Der bndige Einbau eines Lese-/Schreibkopfes in Metall verringert den Lese-/Schreibabstand. Die unmittelbare Nhe starker HF-Emissionsquellen, wie z.B. Schweitra-
fos oder Umformer, kann die Funktion der Lese-/Schreibkpfe beeintrch-
tigen. DE Informationen zum erhltlichen Montagezubehr sind im Internet abrufbar unter:
www.ifm.com Datenblatt-Suche z.B. DTA100 Zubehr 5.2 Hinweise zur ID-TAG Montage Die Montage der ID-TAGs in/auf Metall verringert den Lese-/Schreibab-
stand. Zur Positionierung der ID-TAGs sind die Lese-/Schreibkpfe auf der aktiven Flche mit einem Antennensymbol versehen. Es kennzeichnet die Mitte der integrierten Antennenspule und muss mit der ID-TAG Mitte bereinstimmen. Die Ausrichtung der Lese-/Schreibkopf-Antennenachse muss mit der Achse der ID-TAG Spule bereinstimmen. Angaben zur optimalen Positionierung der erhltlichen ID-TAGs und zum Einbau in Metall sind im Internet abrufbar unter:
www.ifm.com Datenblatt-Suche z.B. DTA100 weitere Informationen
(Grundlagen fr Montage und Betrieb) 7 DTA10x Befestigung 5.3 5.3.1 Das Gert wahlweise mit 2 Stk. M4 Schrauben und Muttern oder mittels Klemmhalterung befestigen. Montagebeispiel E20898 5.3.2 Montageabstnde Montagebeispiel E20901 B A A Betriebsart Nur Lesen Lesen und Schreiben Abstand seitlich (A) Abstand frontal (B) 200 mm 400 mm 200 mm 400 mm 8 5.3.3 Positionierung der ID-TAGs E80320 E80311 E80312 E80317 E80318 E80319 E80322 2 1 E80301 E80302 Frontseite berkopf 1:
2:
5.3.4 Ausrichtung der ID-TAGs 1 1 1 1 2 1:
2:
Antennenachse DTA10x = Achse ID-TAG Antennenmitte DTA10x = Mitte ID-TAG DE 9 5.3.5 ID-TAG E80301 E80302 E80311 E80312 E80317 E80318 E80319 E80320 E80322 Lese-/Schreibabstnde Bauform Positionierung Lesen Schreiben Frontseite 20 20 10 10 berkopf 5...20 8*
5...20 10...28 15...40 20...60 20...50 18...60 15...40 Alle Angaben gelten fr statische Lese-/Schreibvorgnge. Wenn nicht anders angegeben, beziehen sie sich auf den ID-TAG Einbau in eine nicht-metallische Umgebung. Alle Angaben in mm
*) ID-TAG Einbau bndig in Metall DTA20x 5.4 5.4.1 Die aktive Flche ist im Lieferzustand nach vorne gerichtet. Mechanischer Aufbau 1 2 1:
2:
Antennenkopf (ausrichtbar) Befestigungselement Lieferzustand 10 5.4.2 Aktive Flche ausrichten 180 90 1. Schraube lsen. 2. Antennenkopf vom Befestigungselement trennen und drehen. DE 3. Befestigungselement und Antennenkopf zusammenstecken. 4. Schraube anziehen. Befestigung 5.4.3 Das Gert mit 2 Stk. M4 Schrauben und Muttern befestigen. Wahlweise nicht bndig oder bndig. nicht bndig bndig 11 5.4.4 Montageabstnde B A A Abstand seitlich (A) Abstand frontal (B) 150 mm 300 mm 150 mm 300 mm Betriebsart Nur Lesen Lesen und Schreiben 5.4.5 Positionierung der ID-TAGs 1 E80311 E80312 E80317 E80318 E80319 E80322 E80320 1:
Frontseite 12 DE 5.4.6 Ausrichtung der ID-TAGs 2 21 1:
2:
5.4.7 Antennenachse DTA20x = Achse ID-TAG Antennenmitte DTA20x = Mitte ID-TAG Lese-/Schreibabstnde ID-TAG E80311 E80312 E80317 E80318 E80319 E80320 E80322 Bauform Einbau Lese-/Schreibkopf nicht bndig bndig in Metall 25 25 35 55 65 60 55 22 22 28 36 45 40 36 Alle Angaben gelten fr statische Lese-/Schreibvorgnge. Wenn nicht anders angegeben, beziehen sie sich auf den ID-TAG Einbau in eine nicht-metallische Umgebung. Alle Angaben in mm 13 DTA30x Befestigung 5.5 5.5.1 Das Gert wahlweise auf einer 35 mm Normschiene oder mit 4 Stk. M5 Schrauben und Muttern befestigen. Montagebeispiel E11122 5.5.2 Montageabstnde B Betriebsart Nur Lesen Lesen und Schreiben 14 A A Abstand seitlich (A) Abstand frontal (B) 280 mm 500 mm 400 mm 500 mm 5.5.3 Positionierung der ID-TAGs 1 DE E80311 E80312 E80317 E80318 E80319 E80322 E80320 Frontseite 1:
5.5.4 Ausrichtung der ID-TAGs 2 21 Antennenachse DTA30x = Achse ID-TAG Antennenmitte DTA30x = Mitte ID-TAG Lese-/Schreibabstnde 1:
2:
5.5.5 ID-TAG E80311 E80312 E80317 E80318 Bauform Lesen Schreiben 35 40 50 80 15 ID-TAG E80319 E80320 E80322 Bauform Lesen Schreiben 110 90 80 Alle Angaben gelten fr statische Lese-/Schreibvorgnge. Wenn nicht anders angegeben, beziehen sie sich auf den ID-TAG Einbau in eine nicht-metallische Umgebung. Alle Angaben in mm 5.5.6 Der Steckereinsatz ist in 45-Schritten drehbar. Steckereinsatz drehen 1. berwurfmutter lsen 2. Steckereinsatz herausziehen und drehen 3. berwurfmutter festziehen 16 Elektrischer Anschluss Anschlussbelegung 6 6.1 Das Gert ber die M12-Steckverbindung mit dem AS-i-Netz verbinden. Die Spannungsversorgung erfolgt aus dem AS-i-Netz. 2 3 1 4 1 BN 3 BU ASI+
ASI DE Anschlussbelegung und Adernfarben bei ifm-Kabeldosen 1 = BN (braun) 2 = BU (blau) Eine Auswahl an Kabeldosen ist im Internet abrufbar unter:
www.ifm.com Datenblatt-Suche z.B. DTA100 Zubehr 6.2 6.2.1 Mindestabstand AS-i Leitung zum Gehuse DTA10x A A A A A A A A) 100 mm 17 6.2.2 DTA20x A A A A A B A A A) 50 mm B) 100 mm 6.2.3 DTA30x A A A A B A A A A) 250 mm B) 500 mm 18 UL-Zulassung 6.3 Folgender Hinweis gilt nur fr die Gerte DTA20x und DTA30x. Das Gert von einer galvanisch getrennten Quelle versorgen, die sekundr ber eine UL-zugelassene Sicherung mit folgendem max. Nennstrom verfgt. a) 5 A bei Spannungen von 0...20 Vrms (0...28,3 Vp) b) 100/Vp bei Spannungen von 20...30 Vrms (28,3...42,4 Vp) 7 Anzeigeelemente 32 1 1 2 3 DTA10x DTA20x DTA30x DE 1 3 2 1:
2:
3:
7.1 LED grn gelb rot grn (Betriebsspannung) gelb (ID-TAG) rot (AS-i Datenkommunikation) Zustand EIN AUS EIN (Impuls) EIN (permanent) AUS Lesebetrieb (Grundeinstellung) Bedeutung Betriebsspannung ok Betriebsspannung fehlt ID-TAG erfolgreich gelesen ID-TAG erfolgreich gelesen und noch im Feld kein ID-TAG im Feld oder fehlerhafter ID-TAG im Feld oder ungltiger ID-TAG im Feld Fehler AS-i Datenkommunikation AS-i Datenkommunikation ok EIN AUS 19 Schreibbetrieb (nur DTA100, DTA200, DTA300) Bedeutung wie Lesebetrieb ID-TAG erfolgreich beschrieben kein ID-TAG im Feld oder fehlerhafter ID-TAG im Feld oder ungltiger ID-TAG (falsche Kennung) ID-TAG beschreiben nicht mglich ID-TAG nicht formatiert ID-TAG nicht im Erfassungsbereich ID-TAG mit Lockbit geschtzt Wert auerhalb des Wertebereiches ungltiger Befehl 7.2 LED grn/rot gelb Zustand EIN/AUS EIN (Impuls) AUS gelb 500 ms blinkend 20 DE 8 8.1 Parameter Betrieb Grundeinstellungen im AS-i Netzwerk Lese-/Schreibkopf DTA100, DTA200, DTA300 Lesekopf DTA101, DTA201, DTA301 7.3 7 3 C F 0 7.4 7 4 C F 0 AS-i Profil I/O Code ID Code Extended ID2 Code ID1 Code fr Codewert Slave-Adresse (Werkseinstellung) Codewerte im Hex-Format 8.2 Adressierung Der Lese-/Schreibkopf wird adressiert mit einem Adressiergert (z.B. AC1144), dem Master oder mit der AS-i-Software des Hosts (die Komponenten mssen AS-i Version 2.1 untersttzen). 8.3 Fr das AS-Interface ist der Lese-/Schreibkopf ein Analogeingang-Slave mit bertragungsprotokoll nach Profil 7.4 bzw. 7.3 (siehe oben). Arbeitet der Master gem Master-Profil M3 oder M4, erkennt er den Lese-/Schreibkopf automatisch und untersttzt das Profil 7.4. Im Bereich der Analogwertbertragung sind die Profile 7.3 und 7.4 identisch. 8.4 In einem bertragungszyklus werden folgende Daten in Datentripel bertragen:
E1 Extension Eine Adresse zwischen 1 und 31 vergeben. E3 D16 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 Analogwert-Reprsentation Belegung der Datenbits E2 O V bits User Data Bits
(statisch 0) Additional Information Bits:
O = Overflow-Bit (wird bei den Werten 7FFF und 8000 Hex. gesetzt, sonst 0) V = Valid-Bit (wird bei einem gltigen Wert gesetzt) 21 bis 7FFF 8000 Codewert-Darstellung durch Datenbits D16...D1 8.5 Die Darstellung des ID-Wertes erfolgt als vorzeichenbehaftete 16 Bit Zahl. Bereich Dezimal von 0
-1 bis 32767
-32768 Hex von 0 FFFF Wertebereich Meldebereich Wert 0 = kein ID-TAG im Lesebereich oder ID-TAG nicht erkannt. 8.6 Zusatzfunktionen gem AS-i Profil 7.4
(Nur gltig fr Lese-/Schreibkpfe) Funktion, Beschreibung Read ID String AS-i Slave informationen abfragen Read Diagnosis String Statistiken ber Lese-/Schreibvorgnge abfragen Read Parameter String Daten vom ID-TAG rcklesen Write Parameter String Daten auf ID-TAG schreiben Daten vom ID-TAG anfordern
= Funktion implementiert Beschreibung, Beispiele und Software fr diverse Steuerungen unter:
www.ifm.com Service Download DTA100 DTA200 DTA300 22 9 9.1 Mae DTA10x 9.2 DTA20x 5 5
, 5 3 5 0 7 5 40 24 56 41 7 1 5
, 5 4,2 DE M12 x1 17 4,5 66 54 46 40 46 0 3 2 5
, 9 2 5
, 5 0 3 1 x 2 1 M 5 5
, 23 9.3 DTA30x 112 92 9,3 5,5 40 40 20 1 x 2 1 M 5 6 0 8 65 7,5 17 Alle Angaben in mm Technische Daten 10 Die Datenbltter sind im im Internet abrufbar unter:
www.ifm.com Datenblatt-Suche z.B. DTA100 11 Wartung, Instandsetzung und Entsorgung Da innerhalb des Gertes keine vom Anwender zu wartenden Bauteile enthal-
ten sind, das Gehuse nicht ffnen. Die Instandsetzung des Gertes darf nur durch den Hersteller durchgefhrt werden. Das Gert gem den nationalen Umweltvorschriften entsorgen. bersicht Zulassungen/Normen Funkzulassungen 12 12.1 12.1.1 Die bersicht zum Zulassungsstand eines Gertes ist im Internet abrufbar unter:
www.ifm.com Datenblatt-Suche z.B. DTA300 Zulassungen 12.1.2 Intended use: Verwendung in allen EU Staaten Europa 24 DE Hinweise FCC (USA, Kanada) 12.1.3 Dieses Gert erfllt den Teil 15 der Bestimmungen der FCC und die RSS-210 der Industry Canada. Der Betrieb setzt die folgenden zwei Bedingungen voraus:
(1) Dieses Gert darf keine schdlichen Strungen verursachen und
(2) dieses Gert muss eine Beeinflussung tolerieren, einschlielich einer Beein-
flussung, die einen unerwnschten Betrieb verursachen kann. Warnhinweis:
nderungen, die an diesem Gert ohne ausdrckliche Genehmigung der ifm electronic gmbh durchgefhrt werden, knnen die Genehmigung der FCC, dieses Gert zu betreiben, ungltig machen. Hinweis:
Dieses Gert wurde getestet und erfllt die Bestimmungen hinsichtlich der Be-
schrnkungen fr digitale Gerte der Klasse B gem Teil 15 der FCC Bestim-
mungen. Diese Beschrnkungen dienen dem angemessenen Schutz vor schdlichen St-
rungen, wenn das Gert in einem Wohngebiet betrieben wird. Dieses Gert erzeugt und verwendet Hochfrequenzenergie und kann diese aus-
strahlen. Wird das Gert nicht gem dieser Anleitung installiert und verwendet, kann dies zu schdlichen Strungen des Funkverkehrs fhren. Es wird keine Garantie dafr bernommen, dass es bei bestimmten Installationen nicht doch zu Interferenzen kommen kann. Fhrt dieses Gert zu Strungen beim Radio- oder Fernsehempfang, die durch Aus- und Einschalten des Gertes nachweisbar sind, sollte der Betreiber versuchen, die Strung durch eine oder mehrere der folgenden Manahmen zu beseitigen:
12.1.4 Das Type Approval Certificate ist im Internet abrufbar unter:
www.ifm.com Datenblatt-Suche z.B. DTA100 Zulassungen Antenne neu ausrichten oder an anderer Stelle platzieren. Abstand zwischen Gert und Empfangsteil vergrern. Gert an einen anderen Stromkreis anschlieen als das Empfangsteil. Hndler oder erfahrenen Radio-/Fernsehtechniker um Hilfe bitten. China 25 12.1.5 Singapur Complies with IDA Standards Db 103032 Die Equipment Registration ist im Internet abrufbar unter:
www.ifm.com Datenblatt-Suche z.B. DTA100 Zulassungen 12.2 Die EG-Konformittserklrung ist im Internet abrufbar unter:
www.ifm.com Datenblatt-Suche z.B. DTA100 Zulassungen EG-Konformittserklrung 26 DE 27 Inhalt 1 Preliminary note ...................................................................................................4 1.1 Symbols used ...............................................................................................4 2 Safety instructions ...............................................................................................4 2.1 General .........................................................................................................4 2.2 Radio equipment ..........................................................................................5 2.3 Interference of electronic and medical devices ............................................5 3 Functions and features ........................................................................................5 4 Function ...............................................................................................................5 4.1 Operating principle .......................................................................................5 4.2 Type overview ...............................................................................................6 5 Installation............................................................................................................7 5.1 General installation instructions ....................................................................7 5.2 Notes on ID tag mounting .............................................................................7 5.3 DTA10x .........................................................................................................8 5.3.1 Fixing ....................................................................................................8 5.3.2 Mounting distances ..............................................................................8 5.3.3 Positioning of the ID tags ......................................................................9 5.3.4 Orientation of the ID tags ......................................................................9 5.3.5 Read/write distances .........................................................................10 5.4 DTA20x .......................................................................................................10 5.4.1 Mechanical design ..............................................................................10 5.4.2 Alignment of the sensing face ............................................................. 11 5.4.3 Fixing .................................................................................................. 11 5.4.4 Mounting distances ............................................................................12 5.4.5 Positioning of the ID tags ....................................................................12 5.4.6 Orientation of the ID tags ....................................................................13 5.4.7 Read/write distances .........................................................................13 5.5 DTA30x .......................................................................................................14 5.5.1 Fixing ..................................................................................................14 5.5.2 Mounting distances ............................................................................14 5.5.3 Positioning of the ID tags ....................................................................15 5.5.4 Orientation of the ID tags ....................................................................15 5.5.5 Read/write distances .........................................................................15 5.5.6 Rotating plug insert .............................................................................16 2 UK 6 Electrical connection ..........................................................................................17 6.1 Wiring .........................................................................................................17 6.2 Minimum distance between AS-i cable and housing ..................................17 6.2.1 DTA10x ...............................................................................................17 6.2.2 DTA20x ...............................................................................................18 6.2.3 DTA30x ...............................................................................................18 6.3 UL approval ................................................................................................19 7 Indicators ...........................................................................................................19 7.1 Read operation (basic setting) ....................................................................19 7.2 Write operation (only DTA100, DTA200, DTA300) .....................................20 8 Operation ...........................................................................................................21 8.1 Basic settings in the AS-i network ..............................................................21 8.2 Addressing ..................................................................................................21 8.3 Analogue value representation ...................................................................21 8.4 Assignment of the data bits ........................................................................21 8.5 Code value representation using the data bits D16...D1 ............................22 8.6 Additional functions to the AS-i profile 7.4 ..................................................22 9 Dimensions ........................................................................................................23 9.1 DTA10x .......................................................................................................23 9.2 DTA20x .......................................................................................................23 9.3 DTA30x .......................................................................................................24 10 Technical data ..................................................................................................24 11 Maintenance, repair and disposal ....................................................................24 12 Approvals/standards ........................................................................................24 12.1 Radio approvals ........................................................................................24 12.1.1 Overview ...........................................................................................24 12.1.2 Europe ..............................................................................................24 12.1.3 FCC Notices (USA, Canada) ............................................................25 12.1.4 China ................................................................................................25 12.1.5 Singapore .........................................................................................26 12.2 EC Declaration of Conformity ...................................................................26 3 Preliminary note 1 This document applies to all DTA125 type units. It is part of the device and contains information about the correct handling of the product. This document is intended for specialists. These specialists are people who are qualified by their training and their experience to see risks and to avoid possible hazards that may be caused during operation or maintenance of the device. Read this document before use to familiarise yourself with operating conditions, installation and operation. Keep this document during the entire duration of use of the device. 1.1 Instruction Cross-reference Important note Non-compliance can result in malfunctions or interference. Information Supplementary note Symbols used Safety instructions General 2 2.1 Observe the operating instructions. Non-observance of the instructions, operation which is not in accordance with use as prescribed below, wrong installation or handling can affect the safety of people and machinery. The installation and connection must comply with the applicable national and international standards. Responsibility lies with the person installing the unit. The unit must only be installed, connected and put into operation by a qualified electrician as the safe function of the unit and machinery is only guaranteed when installation is correctly carried out. Disconnect the unit externally before handling it. In case of malfunction of the device or uncertainties please contact the manufacturer. Tampering with the unit can seriously affect the safety of operators and machinery. This is not permitted and leads to an exclusion of liability and warranty. 4 Radio equipment 2.2 In general, radio equipment must not be used in the vicinity of petrol stations, fuel depots, chemical plants or blasting operations. Do not transport and store any flammable gases, liquids or explosive substances near the unit. Interference of electronic and medical devices 2.3 Operation can affect the function of electronic devices that are not correctly shielded. Disconnect the device in the vicinity of medical equipment. Contact the manufacturer of the corresponding device in case of any interference. UK Functions and features 3 The DTS125 RF identification system enables non-contact reading and/or writing of RFID transponders (ID tags) conforming to the system. The data is converted into digitally coded values and provided to the AS-i control level (AS-i master, controller or host). Application examples:
Material flow control in production lines Warehouse management by the automatic detection of stored products Tank management, order picking or product tracking Function Operating principle 4 4.1 The ID tags are operated passively, i.e. without battery. The energy required for operation is supplied by the read/write head. The physical principle of the energy transfer is based on inductive coupling. The integrated antenna coil in the read/write head generates a magnetic field which partly penetrates the antenna coil of the ID tag. A voltage is generated by induction that supplies the data carrier with energy. 5 ID tag energy data read/write head display HF and analogue circuit a n n e n a t controller and AS-interface AS-i master, controller or host function (example read/write head DTA100 and ID tag E80301) 4.2 Type overview DTA20x DTA30x Function Read/write head Read head Read/write head Read head Type designation DTS125 AARWASUS DTS125 AAROASUS DTS125 MCRWASUS DTS125 MCROASUS H x V x D [mm]
55 x 24 x 41 40 x 40 x 54 DTA10x Art. no. DTA100 DTA101 DTA200 DTA201 6 Art. no. DTA300 DTA301 Function Read/write head Read head Type designation DTS125 DCRWASUS DTS125 DCROASUS H x V x D [mm]
92 X 80 X 40 5 5.1 Installation General installation instructions When mounting several read/write heads adhere to the minimum distances between the systems. Flush mounting of a read/write head in metal reduces the read/write distance. The immediate vicinity of powerful HF emission sources such as welding transformers or converters can affect operation of the read/write heads. UK Information on the available mounting accessories is available on our website at:
www.ifm.com Data sheet direct e.g. DTA100 Accessories 5.2 Notes on ID tag mounting If the ID tags are mounted in/on metal, the read/write distance is reduced. For positioning the ID tags the read/write heads are marked with an an-
tenna symbol on the active face. It designates the middle of the integrated antenna coil and has to correspond with the middle of the ID tag. The orientation of the read/write head antenna axis must correspond with the axis of the ID tag coil. You can find out about the best way to position the available ID tags and on mounting in metal on our website at:
www.ifm.com Data sheet direct e.g. DTA100 Additional data
(General information about mounting and operation) 7 DTA10x Fixing 5.3 5.3.1 The device is fixed via either 2 M4 screws and nuts or via an angle bracket. mounting example E20898 5.3.2 Mounting distances mounting example E20901 B A A Operating mode Reading only For reading and writing Distance side (A) Distance front (B) 200 mm 400 mm 200 mm 400 mm 8 5.3.3 Positioning of the ID tags E80320 E80311 E80312 E80317 E80318 E80319 E80322 2 1 E80301 E80302 front side overhead 1:
2:
5.3.4 Orientation of the ID tags 1 1 1 1 2 1:
2:
DTA10x antenna axis = ID tag axis DTA10x middle of the antenna = middle of the ID tag UK 9 5.3.5 ID tag Read/write distances Type Positioning Read Write E80301 E80302 E80311 E80312 E80317 E80318 E80319 E80320 E80322 front side 20 20 10 10 overhead 5...20 8*
5...20 10...28 15...40 20...60 20...50 18...60 15...40 All indications apply to static read/write operations. If not otherwise stated they refer to ID tag installation in a non-metallic environment. All indications in mm.
*) ID tag flush mounting in metal DTA20x 5.4 5.4.1 On delivery the sensing face is facing the front. Mechanical design 1 2 1:
2:
antenna head (can be aligned) xing element on delivery 10 5.4.2 Alignment of the sensing face 180 90 1. Loosen the screw. 2. Remove the antenna head from the fixing element and turn it. UK 4. Tighten the screw. 3. Attach the fixing element to the antenna head. 5.4.3 Fixing The device is fixed with 2 M4 screws and nuts. Order non flush or flush. non flush flush 11 5.4.4 Mounting distances B A A Distance side (A) Distance front (B) 150 mm 300 mm 150 mm 300 mm Operating mode Reading only For reading and writing 5.4.5 Positioning of the ID tags 1 E80311 E80312 E80317 E80318 E80319 E80322 E80320 1:
front side 12 5.4.6 Orientation of the ID tags 2 21 1:
2:
5.4.7 antenna axis DTA20x = ID tag axis middle of the antenna DTA20x = middle of the ID tag Read/write distances ID tag E80311 E80312 E80317 E80318 E80319 E80320 E80322 Type Installation read/write head Non flush Flush in metal 25 25 35 55 65 60 55 22 22 28 36 45 40 36 All indications apply to static read/write operations. If not otherwise stated they refer to ID tag installation in a non-metallic environment. All indications in mm. UK 13 DTA30x Fixing 5.5 5.5.1 The device is fixed via either a 35 mm DIN rail or via 4 M5 screws and nuts. example mounting E11122 5.5.2 Mounting distances B A A Operating mode Reading only For reading and writing Distance side (A) Distance front (B) 280 mm 500 mm 400 mm 500 mm 14 5.5.3 Positioning of the ID tags 1 E80311 E80312 E80317 E80318 E80319 E80322 E80320 UK front side 1:
5.5.4 Orientation of the ID tags 2 21 1:
2:
5.5.5 ID tag DTA30x antenna axis = ID tag axis DTA30x middle of the antenna = middle of the ID tag Read/write distances Type Read Write E80311 E80312 E80317 E80318 35 40 50 80 15 ID tag E80319 E80320 E80322 Type Read Write 110 90 80 All indications apply to static read/write operations. If not otherwise stated they refer to ID tag installation in a non-metallic environment. All indications in mm. 5.5.6 The plug insert can be rotated in steps of 45. Rotating plug insert 1. Loosen nut. 2. Remove plug insert and rotate. 3. Tighten nut. 16 Electrical connection Wiring 6 6.1 Connect the unit to the AS-i network using the M12 connector. Voltage is supplied via the AS-i network. 2 3 1 4 1 BN 3 BU ASI+
ASI Wiring and core colours of ifm sockets 1 = BN (brown) 2 = BU (blue) A selection of sockets is available on our website at:
www.ifm.com Data sheet direct e.g. DTA100 Accessories 6.2 6.2.1 Minimum distance between AS-i cable and housing DTA10x A A A A A A A A) 100 mm UK 17 6.2.2 DTA20x A A A A A B A A A) 50 mm B) 100 mm 6.2.3 DTA30x A A A A B A A A A) 250 mm B) 500 mm 18 UL approval 6.3 The following note applies to the units DTA20x and DTA30x only. The device shall be supplied from an isolating transformer having a secondary Listed fuse rated either a) max 5 amps for voltages 0...20 Vrms (0...28.3 Vp) or b) 100/Vp for voltages of 20...30 Vrms (28.3...42.4 Vp). 7 Indicators 32 1 1 2 3 DTA10x DTA20x DTA30x green (operating voltage) yellow (ID tag) red (AS-i data communication) 1:
2:
3:
7.1 LED green yellow red Status ON OFF ON (pulse) ON (permanently) OFF Read operation (basic setting) Description operating voltage OK operating voltage missing ID tag read successfully ID tag read successfully and still in the field no ID tag in the field or faulty ID tag in the field or invalid ID tag in the field error AS-i data communication AS-i data communication OK ON OFF UK 1 3 2 19 Write operation (only DTA100, DTA200, DTA300) Description like read operation ID tag written successfully no ID tag in the field or faulty ID tag in the field or invalid ID tag (wrong identification) writing of the ID tag not possible ID tag not formatted ID tag not in the detection zone ID tag protected by lock bit value outside the value range invalid command 7.2 LED green/red ON/OFF yellow Status ON (pulse) OFF yellow 500 ms flashing 20 UK Operation Basic settings in the AS-i network 8 8.1 Parameter Read/write head DTA100, DTA200, DTA300 Read head DTA101, DTA201, DTA301 Addressing 7.4 7 4 C F 0 7.3 7 3 C F 0 AS-i profile I/O code ID code Extended ID2 code ID1 code for code value Slave address (factory setting) Code values in hex format 8.2 The read/write head is addressed using an addressing unit (e.g. AC1144), the master or the AS-i software of the host (the components must support the AS-i version 2.1). 8.3 For the AS-interface the read/write head is a slave having an analogue input with the transmission protocol to the profile 7.4 or 7.3 (see above). If the master operates to the master profile M3 or M4, it automatically detects the read/write head and supports the profile 7.4. For the analogue value transmission the profiles 7.3 and 7.4 are identical. 8.4 In one transmission cycle the following data is transferred in data triples:
E3 D16 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 E1 extension Analogue value representation Assign an address between 1 and 31. Assignment of the data bits E2 O V user data bits bits
(static 0) Additional information bits:
O = overflow bit (is set with the values 7FFF and 8000 hex., otherwise 0) V = valid bit (is set with a valid value) 21 Code value representation using the data bits D16...D1 8.5 The ID value is represented as a signed 16-bit number. Range Decimal from 0
-1 to 32767
-32768 Hex from 0 FFFF Additional functions to the AS-i profile 7.4 Value range Message range Value 0 = no ID tag in the reading range or ID tag not detected 8.6
(Applies only to read/write heads) Function, description Read ID string reading AS-i slave information Read diagnosis string reading statistics via read/write processes Read parameter string reading back data from the ID tag Write parameter string writing data on the ID tag requesting data from the ID tag
= function implemented Description, examples and software for various controllers at:
www.ifm.com Service Download to 7FFF 8000 DTA100 DTA200 DTA300 22 9 9.1 Dimensions DTA10x 5 5
, 5 3 5 0 7 5 40 9.2 DTA20x 24 56 41 7 1 5
, 5 4,2 UK M12 x1 17 4,5 66 54 46 40 46 0 3 2 5
, 9 2 5
, 5 0 3 1 x 2 1 M 5 5
, 23 9.3 DTA30x 112 92 9,3 5,5 40 40 20 1 x 2 1 M 5 6 0 8 65 7,5 17 All indications in mm Technical data 10 The data sheets are available on our website at:
www.ifm.com Data sheet direct e.g. DTA100 11 Maintenance, repair and disposal Do not open the housing, as the device does not contain any components which must be maintained by the user. The device must only be repaired by the manufacturer. Dispose of the device in accordance with the national environmental regulations. Overview Approvals/standards Radio approvals 12 12.1 12.1.1 The overview of the approval status of a unit is available on our website at:
www.ifm.com Data sheet direct e.g. DTA300 Approvals 12.1.2 Intended use: Use in all EU countries 24 Europe UK FCC Notices (USA, Canada) 12.1.3 This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) this device must not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Warning:
Changes or modifications made to this equipment not expressly approved by ifm electronic gmbh may void the FCC authorization to operate this equipment. Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 12.1.4 The "Type Approval Certificate" is available on our website at:
www.ifm.com Data sheet direct e.g. DTA100 Approvals China 25 12.1.5 Singapore Complies with IDA Standards Db 103032 The Equipment Registration is available on our website at:
www.ifm.com Data sheet direct e.g. DTA100 Approvals 12.2 You can find the EC declaration of conformity on our website at:
www.ifm.com Data sheet direct e.g. DTA100 Approvals EC Declaration of Conformity 26 UK 27 Inhalt 1 Remarque prliminaire ........................................................................................4 1.1 Symboles utiliss ..........................................................................................4 2 Consignes de scurit .........................................................................................4 2.1 Gnral .........................................................................................................4 2.2 Equipements radio ........................................................................................5 2.3 Perturbations d'appareils lectroniques et mdicaux ...................................5 3 Fonctionnement et caractristiques .....................................................................5 4 Fonction ...............................................................................................................5 4.1 Principe de fonctionnement ..........................................................................5 4.2 Aperu des types ..........................................................................................6 5 Montage ...............................................................................................................7 5.1 Notices de montage gnrales .....................................................................7 5.2 Remarques sur le montage des TAG ...........................................................7 5.3 DTA10x .........................................................................................................8 5.3.1 Fixation .................................................................................................8 5.3.2 Distances de montage ..........................................................................8 5.3.3 Positionnement des TAG ......................................................................9 5.3.4 L'orientation des TAG ...........................................................................9 5.3.5 Distances de lecture/criture ..............................................................10 5.4 DTA20x .......................................................................................................10 5.4.1 Conception mcanique .......................................................................10 5.4.2 Orientation de la face active ............................................................... 11 5.4.3 Fixation ............................................................................................... 11 5.4.4 Distances de montage ........................................................................12 5.4.5 Positionnement des TAG ....................................................................12 5.4.6 L'orientation des TAG .........................................................................13 5.4.7 Distances de lecture/criture ..............................................................13 5.5 DTA30x .......................................................................................................14 5.5.1 Fixation ...............................................................................................14 5.5.2 Distances de montage ........................................................................14 5.5.3 Positionnement des TAG ....................................................................15 5.5.4 L'orientation des TAG .........................................................................15 5.5.5 Distances de lecture/criture ..............................................................15 5.5.6 Orienter l'insert du connecteur............................................................16 2 FR 6 Raccordement lectrique ...................................................................................17 6.1 Schma de branchement ...........................................................................17 6.2 Distance minimale entre le cble AS-i et le botier .....................................17 6.2.1 DTA10x ...............................................................................................17 6.2.2 DTA20x ...............................................................................................18 6.2.3 DTA30x ...............................................................................................18 6.3 Homologation UL ........................................................................................19 7 Elments de visualisation ..................................................................................19 7.1 Fonctionnement lecture (rglage de base) .................................................19 7.2 Fonctionnement criture (uniquement DTA100, DTA200 et DTA300) ........20 8 Fonctionnement .................................................................................................20 8.1 Rglages de base dans le rseau AS-i ......................................................20 8.2 Adressage ...................................................................................................20 8.3 Reprsentation des valeurs analogiques ...................................................21 8.4 Affectation des bits de donnes ..................................................................21 8.5 Reprsentation des valeurs codes par des bits de donnes D16D1 ....21 8.6 Fonctions supplmentaires selon le profil AS-i 7.4 .....................................22 9 Dimensions ........................................................................................................23 9.1 DTA10x .......................................................................................................23 9.2 DTA20x .......................................................................................................23 9.3 DTA30x .......................................................................................................24 10 Donnes techniques ........................................................................................24 11 Maintenance, rparation et limination ............................................................24 12 Homologations/normes ....................................................................................24 12.1 Homologations radio .................................................................................24 12.1.1 Aperu ..............................................................................................24 12.1.2 Europe ..............................................................................................24 12.1.3 Notes FCC (tats-Unis, Canada) .....................................................25 12.1.4 Chine ................................................................................................25 12.1.5 Singapour .........................................................................................26 12.2 Dclaration de conformit CE ...................................................................26 3 Remarque prliminaire 1 Ce document s'applique tous les appareils DTS125. Il fait partie de l'appareil et fournit des informations sur l'utilisation correcte du produit. Ce document s'adresse des personnes comptentes. Ce sont des personnes qui sont capables - grce leur formation et exprience dapercevoir des risques et d'viter des dangers potentiels qui pourraient tre causs par le fonctionnement ou la maintenance de l'appareil. Lire ce document avant l'utilisation afin de vous familiariser avec les conditions environnantes, l'installation et le fonctionnement. Garder ce document pendant tout le temps d'emploi de l'appareil. 1.1 Action faire Rfrence Symboles utiliss Remarque importante Le non-respect peut aboutir des dysfonctionnements ou perturbations. Information Remarque supplmentaire Consignes de scurit Gnral 2 2.1 Respecter les indications de cette notice. Le non-respect des consignes, l'emploi non conforme par rapport aux prescriptions, un montage ou une manipulation incorrect peuvent porter atteinte la scurit des personnes et des installations. Le montage et le raccordement doivent tre conformes aux normes nationales et internationales en vigueur. La personne qui installe l'appareil en est responsable. L'appareil doit tre mont, raccord et mis en service par un lectricien qualifi car seul un montage correct garantit le bon fonctionnement de l'appareil et de l'installation. Mettre l'appareil hors tension en externe avant toute manipulation. En cas de mauvais fonctionnement de l'appareil ou en cas de doute contacter le fabricant. Les interventions sur l'appareil peuvent avoir des consquences graves 4 Equipements radio pour la scurit des personnes et des installations. Elles ne sont pas autorises et aboutissent une exclusion de responsabilit et de garantie. 2.2 En gnral, les quipements radio ne doivent pas tre utiliss proximit de stations d'essence, de dpts de carburants, d'usines chimiques ou de lieux o il existe des risques de dtonation. Ne pas transporter et stocker de gaz, liquides inflammables ou de substances explosives prs de l'appareil. Perturbations d'appareils lectroniques et mdicaux 2.3 L'emploi de l'appareil peut affecter le bon fonctionnement des appareils lectroniques qui ne sont pas correctement blinds. Mettre l'appareil hors tension proximit des quipements mdicaux. En cas de problmes, contacter le fabricant de l'appareil correspondant. FR Fonctionnement et caractristiques 3 Le systme d'identification RFID DTS125 et utilis pour lire et/ou crire sans contact des tiquettes lectroniques RFID (TAG) qui sont compatibles avec le systme. Les donnes sont converties en valeurs TOR codes et mises la disposition au niveau A.P.I. (matre AS-i, systme de commande ou hte). Exemples d'applications :
Contrle du flux de manutention dans des lignes de production Gestion de magasin grce une dtection automatique des produits stocks Gestion de cuves, prparation de commandes ou traabilit des produits fabriqus Fonction Principe de fonctionnement 4 4.1 Les TAG sont passifs, l'nergie ncessaire leur fonctionnement tant fournie par la tte de lecture/criture. Le principe physique du transfert de l'nergie repose sur le couplage inductif. La bobine de l'antenne intgre dans la tte de lecture/criture gnre un champ magntique qui pntre en partie la bobine de l'antenne du TAG. Une tension est gnre par induction qui alimente le support de donnes en nergie. 5 ID tag energy data read/write head display HF and analogue circuit a n n e n a t controller and AS-interface AS-i master, controller or host Fonctionnement (exemple tte de lecture/criture DTA100 et TAG E80301) 4.2 Aperu des types DTA20x DTA30x Fonction tte de lecture/criture tte de lecture tte de lecture/criture tte de lecture Dsignation DTS125 AARWASUS DTS125 AAROASUS DTS125 MCRWASUS DTS125 MCROASUS H x L x P [mm]
55 x 24 x 41 40 x 40 x 54 DTA10x Rfrence DTA100 DTA101 DTA200 DTA201 6 Rfrence DTA300 DTA301 Fonction tte de lecture/criture tte de lecture Dsignation DTS125 DCRWASUS DTS125 DCROASUS H x L x P [mm]
92 x 80 x 40 5 5.1 Montage Notices de montage gnrales En cas de montage de plusieurs systmes respecter les distances minima-
les entre les ttes de lecture/criture . Le montage encastr d'une tte de lecture/criture dans le mtal rduit la distance de lecture/criture. A proximit immdiate des sources d'mission HF, par ex. des transforma-
teurs de soudure ou des convertisseurs, le fonctionnement des ttes de lecture/criture peut tre affect considrablement. Des informations sur les accessoires de montage sont disponibles sur notre site web :
www.ifm.com Fiche technique par ex. DTA100 Accessoires 5.2 Remarques sur le montage des TAG FR Le montage des TAG en/sur mtal rduit la distance lecture/criture. Pour le positionnement des TAG les ttes de lecture/criture sont fournies avec un symbole d'antenne sur la face active. Il marque le milieu de la bobi-
ne de l'antenne intgre et doit correspondre au milieu du TAG. L'orientation de l'axe de l'antenne de la tte de lecture/criture doit corre-
spondre l'axe de la bobine du TAG. Des remarques sur le positionnement optimal des TAG disponibles et sur le montage dans le mtal sont disponibles sur notre site web :
www.ifm.com Fiche technique par ex. DTA100 Information sur Produit
(Informations gnrales sur le montage et le fonctionnement) 7 DTA10x Fixation 5.3 5.3.1 La fixation se fait par 2 vis M4 et crous ou par une querre. exemple de montage E20898 5.3.2 Distances de montage exemple de montage E20901 B A A Mode de fonctionnement Seulement lecture Lecture et criture Distance latrale (A) Distance frontale (B) 200 mm 400 mm 200 mm 400 mm 8 5.3.3 Positionnement des TAG E80320 E80311 E80312 E80317 E80318 E80319 E80322 2 1 E80301 E80302 face avant au dessus de la tte 1:
2:
5.3.4 L'orientation des TAG 1 1 1 1 2 1:
2:
axe de l'antenne DTA10x = axe du TAG milieu de l'antenne DTA10x = milieu du TAG FR 9 5.3.5 TAG Distances de lecture/criture Type Positionnement Lecture Ecriture E80301 E80302 E80311 E80312 E80317 E80318 E80319 E80320 E80322 face avant 20 20 10 10 au dessus de la tte 5...20 8*
5...20 10...28 15...40 20...60 20...50 18...60 15...40 Toutes les indications s'appliquent des process lecture/criture statiques. Sauf indications contraires, elles se rfrent au montage du TAG dans un environnement non-mtallique. Toutes les indications en mm.
*) montage du TAG encastr dans le mtal DTA20x 5.4 5.4.1 A la livraison, la face active est oriente vers l'avant. Conception mcanique 1 2 1:
2:
tte d'antenne (orientable) accessoire de xation la livraison 10 5.4.2 Orientation de la face active 180 90 1. Desserrer la vis. 2. Sparer la tte d'antenne de l'accessoire de fixation et la tourner. FR 3. Placer l'accessoire de fixation sur la tte d'antenne. 4. Serrer la vis. Fixation 5.4.3 La fixation se fait par 2 vis M4 et crous ou par une querre. Au choix encastr ou non. non encastr encastr 11 5.4.4 Distances de montage B A A Distance latrale (A) Distance frontale (B) 150 mm 300 mm 150 mm 300 mm Mode de fonctionnement Seulement lecture Lecture et criture 5.4.5 Positionnement des TAG 1 E80311 E80312 E80317 E80318 E80319 E80322 E80320 1:
face avant 12 5.4.6 L'orientation des TAG 2 21 1:
2:
5.4.7 axe de l'antenne DTA20x = axe du TAG milieu de l'antenne TA20x = milieu du TAG Distances de lecture/criture FR TAG E80311 E80312 E80317 E80318 E80319 E80320 E80322 Montage de la tte de lecture/criture Type Non encastr Encastr dans le mtal 25 25 35 55 65 60 55 22 22 28 36 45 40 36 Toutes les indications s'appliquent des process lecture/criture statiques. Sauf indications contraires, elles se rfrent au montage du TAG dans un environnement non-mtallique. Toutes les indications en mm. 13 DTA30x Fixation 5.5 5.5.1 La fixation se fait sur rail 35 mm ou par 4 vis et crous M5. Exemple de montage E11122 5.5.2 Distances de montage B A A Mode de fonctionnement Seulement lecture Lecture et criture Distance latrale (A) Distance frontale (B) 280 mm 500 mm 400 mm 500 mm 14 5.5.3 Positionnement des TAG 1 E80311 E80312 E80317 E80318 E80319 E80322 E80320 FR face avant 1:
5.5.4 L'orientation des TAG 2 21 axe de l'antenne DTA30x = axe du TAG milieu de l'antenne TA30x = milieu du TAG 1:
2:
5.5.5 TAG Distances de lecture/criture Type Lecture Ecriture E80311 E80312 E80317 E80318 35 40 50 80 15 TAG E80319 E80320 E80322 Type Lecture Ecriture 110 90 80 Toutes les indications s'appliquent des process lecture/criture statique. Sauf indications contraires, elles se rfrent au montage du TAG dans un environnement non-mtallique. Toutes les indications en mm. 5.5.6 L'insert du connecteur est orientable en pas de 45. Orienter l'insert du connecteur 1. Desserrer l'crou. 2. Enlever l'insert du connecteur et le tourner. 3. Serrer l'crou. 16 Raccordement lectrique Schma de branchement 6 6.1 Raccorder la tte de lecture/criture au rseau AS-i via le connecteur M12. L'alimentation en tension s'effectue via le rseau AS-i. 2 3 1 4 1 BN 3 BU ASI+
ASI Schma de branchement et couleurs des fils conducteurs des connecteurs femelles ifm 1 = BN (brun) 2 = BU (bleu) Une slection de connecteurs femelles est disponible sur notre site web :
www.ifm.com Fiche technique par ex. DTA100 Accessoires 6.2 Distance minimale entre le cble AS-i et le botier 6.2.1 DTA10x FR A A A A A A A A) 100 mm 17 6.2.2 DTA20x A A A A A B A A A) 50 mm B) 100 mm 6.2.3 DTA30x A A A A B A A A A) 250 mm B) 500 mm 18 Homologation UL 6.3 La remarque suivante ne sapplique quaux appareils DTA20x et DTA30x. Lappareil doit tre imprativement aliment par une alimentation isole galvaniquement disposant au secondaire dun fusible avec homologation UL et un courant nominal max. de a) 5 ampres pour des tensions de 0...20 Veff (0...28.3 Vpic) ou b) 100/Vpic pour des tensions de 20...30 Veff (28.3...42.4 Vpic). 7 Elments de visualisation 32 1 FR 1 2 3 1 3 2 DTA10x DTA20x DTA30x 1:
2:
3:
7.1 LED verte jaune verte (tension d'alimentation) jaune (TAG) rouge (AS-i communication de donnes) Fonctionnement lecture (rglage de base) Etat ALLUMEE ETEINTE ALLUMEE (impulsion) ALLUMEE
(en permanence) ETEINTE Signification tension d'alimentation ok tension d'alimentation manque TAG lu avec succs TAG lu avec succs et toujours dans le champ aucun TAG dans le champ ou TAG dfectueux dans le champ ou TAG non valable dans le champ dfaut communication de donnes AS-i AS-i communication de donnes ok 19 rouge ALLUMEE ETEINTE Fonctionnement criture (uniquement DTA100, DTA200 et Etat ALLUMEE/ETEINTE Signification comme fonctionnement lecture 7.2 DTA300) LED verte/
rouge jaune ALLUMEE (impulsion) ETEINTE jaune 500 ms clignotant TAG crit avec succs aucun TAG dans le champ ou TAG dfectueux dans le champ ou TAG non valable (identification incorrecte) criture du TAG pas possible TAG non format TAG ne pas dans la zone de dtection TAG protg par lockbit valeur en dehors de la plage de valeurs commande non valable Fonctionnement Rglages de base dans le rseau AS-i 8 8.1 Paramtres Tte de lecture/criture DTA100, DTA200, DTA300 Tte de lecture DTA101, DTA201, DTA301 7.3 7 3 C F 0 7.4 7 4 C F 0 Profil AS-i Code E/S Code ID Code ID2 tendu Code ID1 pour valeur code Adresse d'esclave (rglage usine) Valeurs codes en format hex 8.2 La tte de lecture/criture est adresse l'aide d'une unit d'adressage (par ex. AC1144), le matre AS-i ou le logiciel AS-i de lhte (les composants doivent tre compatibles avec la version AS-i 2.1). Affecter une adresse entre 1 et 31. 20 Adressage Reprsentation des valeurs analogiques 8.3 Pour l'AS-interface la tte de lecture/criture est un esclave ayant une entre analogique avec le protocole de transmission selon le profil 7.4 ou 7.3 (voir ci-dessus). Si le matre travaille selon le profil matre M3 ou M4, il dtecte automatiquement la tte de lecture/criture et est compatible avec le profil 7.4. Pour la transmission de valeurs analogiques les profils 7.3 et 7.4 sont identiques. 8.4 Dans un cycle de transmission les donnes suivantes sont transmises par triplets de donnes :
E1 Affectation des bits de donnes E3 D16 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 O V FR E2 bits bits de donnes utilisateurs d'extension
(0 statique) Bits d'information supplmentaires :
O = bit de dbordement (est mis 1 pour les valeurs 7FFF et 8000 hexa, sinon 0) V = bit valable (est mis 1 pour une valeur valable) 8.5 donnes D16D1 La valeur numrique stocke dans le TAG est reprsente par un nombre de 16 bits avec signe. Plage Reprsentation des valeurs codes par des bits de Dcimal de 0
-1 32767
-32768 Hexa de 0 FFFF Plage de valeurs Plage de messages Valeur 0 = aucun TAG dans la plage de lecture ou TAG non dtect 7FFF 8000 21 DTA100 DTA200 DTA300 Fonctions supplmentaires selon le profil AS-i 7.4 8.6
(S'appliquent seulement aux ttes de lecture/criture) Fonctionnement, description Read ID string (lecture de la chane ID) Vrifier les informations esclave AS-i Read Diagnosis String (lecture de la chane de diagnostic) Vrifier les statistiques sur des process lecture/criture Read Parameter String (lecture de la chane de paramtres) Relire des donnes du TAG Write Parameter String (criture de la chane de paramtres) Ecrire des donnes sur le TAG Vrifier des donnes du TAG
= fonction implmente Description, examples et logiciel pour divers systmes de commande sur notre site web :
www.ifm.com Services Download 22 9 9.1 Dimensions DTA10x 5 5
, 5 3 5 0 7 5 40 9.2 DTA20x 24 56 41 7 1 5
, 5 4,2 M12 x1 17 4,5 FR 66 54 46 40 46 0 3 2 5
, 9 2 5
, 5 0 3 1 x 2 1 M 5 5
, 23 9.3 DTA30x 112 92 9,3 5,5 40 40 20 1 x 2 1 M 5 6 0 8 65 7,5 17 Toutes les indications en mm. Donnes techniques 10 Les fiches techniques sont disponibles sur notre site web :
www.ifm.com Fiche technique par ex. DTA100 11 Maintenance, rparation et limination Ne pas ouvrir l'appareil car il ne contient pas de composants maintenir par l'utilisateur. L'appareil ne doit tre rpar que par le fabricant. S'assurer d'une limination cologique de l'appareil aprs son usage selon les rglements nationaux en vigueur. Aperu Homologations/normes Homologations radio 12 12.1 12.1.1 L'aperu de l'tat d'homologation d'un appareil est disponible sur notre site web :
www.ifm.com Fiche technique par ex. DTA300 Homologations 12.1.2 Utilisation prvue: utilisation dans tous les tats de l'UE 24 Europe FR Notes FCC (tats-Unis, Canada) 12.1.3 Cet appareil est conforme avec la partie 15 des rglements FCC et RSS-210 d'Industrie Canada. Le fonctionnement de cet appareil est soumis aux deux conditions suivantes :
(1) l'appareil ne doit crer aucune interfrence nuisible et
(2) cet appareil doit accepter toute interfrence reue, y compris celles pouvant causer le fonctionnement indsirable de l'appareil. Attention:
Tout changement ou modification effectu sans autorisation explicite de la part d'ifm electronic gmbh peut entraner l'annulation de l'autorisation de la part de FCC d'utiliser ces appareils. Remarque :
Cet appareil a t test et est conforme aux limites concernant les dispositifs numriques de classe B selon la partie 15 des rglements FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences prjudiciables dans une installation domestique. Cet appareil gnre, utilise et peut mettre de lnergie radiofrquence et, sil nest pas install et utilis conformment aux consignes, peut occasionner des interfrences prjudiciables la radiocommunication. Nanmoins, il ny a aucune garantie que des interfrences ne se produiront pas dans une installation particulire. Si cet appareil provoque des interfrences prjudiciables la rception radio ou tlvision, ce qui peut tre dtermin par la mise hors tension et sous tension de lappareil, lutilisateur est demand essayer de corriger linterfrence en prenant une ou plusieurs des mesures suivantes :
Rorienter ou dplacer lantenne rceptrice. Augmenter la distance entre lappareil et le rcepteur. Raccorder lappareil une prise dans un circuit autre que celui auquel le rcepteur est raccord. Contacter le vendeur ou un technicien radio/TV expriment pour obtenir de laide. 12.1.4 Le " Type Approval Certificate " est disponible sur notre site web :
www.ifm.com Fiche technique par ex. DTA100 Homologations Chine 25 12.1.5 Singapour Complies with IDA Standards Db 103032 Le "Equipment Registration" est disponible sur notre site web :
www.ifm.com Fiche technique par ex. DTA100 Homologations 12.2 La dclaration de conformit CE est disponible sur notre site web :
www.ifm.com Fiche technique par ex. DTA100 Homologations Dclaration de conformit CE 26 FR 27
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-08-31 | 0.125 ~ 0.125 | DCD - Part 15 Low Power Transmitter Below 1705 kHz | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2009-08-31
|
||||
1 | Applicant's complete, legal business name |
ifm electronic gmbh
|
||||
1 | FCC Registration Number (FRN) |
0015558760
|
||||
1 | Physical Address |
ifm electronic gmbh
|
||||
1 |
Essen, N/A 45128
|
|||||
1 |
Germany
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
j******@ict.cetecom.de
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
UN6
|
||||
1 | Equipment Product Code |
DTS125-MC
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C**** E********
|
||||
1 | Title |
manager of standards and approvals
|
||||
1 | Telephone Number |
+49 (******** Extension:
|
||||
1 | Fax Number |
+49 (********
|
||||
1 |
c******@ifm.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DCD - Part 15 Low Power Transmitter Below 1705 kHz | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 125 kHz RFID writing/reading device | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
CTC advanced GmbH (former CETECOM ICT Services )
|
||||
1 | Name |
G**** S********
|
||||
1 | Telephone Number |
49-68********
|
||||
1 | Fax Number |
49-68********
|
||||
1 |
t******@ctcadvanced.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 0.12500000 | 0.12500000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC