Installers &
User guide Keypad. 1 Version 0.1 03/22 EK1 Welcome!
This guide will get you up and running with your Keypad. In the meantime, you should follow us on Facebook and Youtube!
Like us on Facebook Visit our Youtube As our igloohome app is frequently updated, there may be changes to this manual. Please refer to our website igloohome.co/support for the latest version of the manual. Table of Contents Whats Included Specifications Keypad Anatomy Features App Onboarding Unlocking Locking Keypad Behavior Installation Instructions Installing / Replacing Batteries Compatible igloohome Locks Audio and LED Indications Troubleshoot 4 5 6 7 9 10 11 15 16 17 18 19 20 Whats Included Keypad Mounting Plate
(with adhesive tape) Torx Screwdriver Torx Screws x2 AA Alkaline Batteries x2 Mounting Screws and Anchors Battery Cover Screw x1 4 Specifications Model Battery Type Battery Life Operation Temp IP Rating Material Weight Keypad 2 x AA* Alkaline Batteries Up to 12 months
-20C to 50C IP66 ABS, PC, Silicone Net: 0.1kg, Gross: 0.2kg Front Side Back
) 4 9 3
. m m 0 0 1 35mm (1.38) 38mm (1.5) 35mm (1.38)
* DO NOT USE: Heavy Duty, Eveready, GP, or rechargeable batteries. Duracell, Energizer and Panasonic alkaline batteries recommended. Please note that using better batteries will improve the performance and lifespan of the keypad.
) 4 9 3
. m m 0 0 1 5 User Guide Keypad Anatomy Front Back LED Indicator Keypad Buttons Unlock Mounting Plate
(with Adhesive Tape) Battery Cover Clear 6 Features Lock / Unlock Master PIN Code User PIN Code The Keypad unlocks with a permanent Master PIN Code. The igloohome mobile app can generate multiple types of User Pin codes, e.g. One-Time, Permanent, Recurring & Duration. Manual Relock User can press and hold the unlock icon on the keypad to trigger manual locking on all linked locks. Battery Low Battery Alert An intuitive audio and LED alert will prompt you to change the batteries when it runs low. 7 Features Security / Alarms Security Lockout Activity Logs Keypad is disabled after several incorrect access attempts to ensure your property is always secure. User can configure number of incorrect attempts to trigger lockout. PIN Code entries will be logged in the app. PIN Code activity logs are updated when the Keypad is synced with the app. Decoy PIN Code Heighten security and throw off onlookers by entering random digits before your actual PIN code. Others Compatible across multiple locks Pairs up to 5 locks The Keypad selected igloohome locks. is compatible with Unlock multiple devices simultaneously with one PIN code.
*Selected lock models are listed in specifications. Volume Control Volume is adjustable to your preference. Select from 0 (mute) to 5 (loudest). 8 App Onboarding Register as a Lock User a) Download the igloohome app from App store / Play store. b) Create an account and login. 3 Pairing The Keypad is designed to work with igloohome locks. Please ensure you have paired your locks to your igloohome account before starting the pairing process for your Keypad.
, go to [Add and Manage], select a) Under
[Keypads], and tap the [+] sign at the top right corner and follow the instructions. Creating a link between the Keypad and lock(s) a) Follow the steps shown in the app after the pairing process is completed. Alternatively, b) Go to [Settings], tap on [Linked Locks & Devices], and tap the [+] sign to create a link between your Keypad and locks. 9 Installation Instructions Remove the Torx screws with the provided Torx screwdriver. Slide the Keypad unit off the mounting plate. S l i d e O u t 10 Installing/Replacing Batteries 3a. Remove the screw and pull out the battery cover. 3b. Install or replace with 2 new AA alkaline batteries. Battery Cover 3c. Put the battery cover back and secure with the screw. 11 Peel off the backing of the adhesive on the back of the mounting plate. Side View Exploded View Adhesive Tape Adhesive Adhesive Backing
(Release liner) Mounting Plate Mounting Plate Peel Off 12 5 Mounting the Keypad Press the mounting plate against the wall/surface where you want to install the Keypad. Ensure the location is within Bluetooth range of the locks you intend to pair it with.
*Before mounting, it is recommended that the Keypad is paired and tested with the locks you want to link to, at the desired installation location. 6 Drill the mounting bracket into the wall with the provided screw and screw anchor. 13 7 Slide the Keypad onto the mounting plate. S l i d e I n 8 Secure the Keypad to the mounting plate with the Torx screws and Torx screwdriver provided. 14 Unlocking a Unlock button. LED indicator will start flashing blue. 1. Key in a valid PIN code (with or without decoy digits), followed by the 2. Paired lock(s) within Bluetooth range (up to 5) will unlock, and LED Indicator will turn green with 4 short ascending tones. 15 Locking a Lock button on the Keypad until LED Indicator 1. Press and hold the starts flashing blue. 2. Paired lock(s) within Bluetooth range (up to 5) will lock once the LED Indicator turns green with a single beep. 16 Keypad Behaviour Security Lockout After several invalid PIN code entries on the keypad, the security alarm will be triggered and the keypad will be not any PINs for a period of time. Security Lockout Triggered by 5 consecutive PIN Code attempts by default
(Configurable via the igloohome app) Disable By After 1 / 5 / 10 Minutes Behaviour Keypad will not accept any PINs and the keypad will flash when it is pressed. Duration Please refer to table below Triggered Security Alarm Security Lockout 1st Time 30 Sec 2nd Time 60 Sec 1 Min 5 Min 3rd and Consecutive Time 90 Sec 10 Min 17 Compatible igloohome Locks Lock Maximum Keypad to lock distance*
Retrofit Lock Less than 30m Deadbolt 2S Metal Grey Less than 30m Keybox 3 Less than 8m Mortise 2/2+
Less than 10m Push-Pull Mortise Less than 30m Rim Lock for Metal Gates Less than 15m Padlock Less than 6m Glass Door Lock Less than 5m Other lock models Newer devices will be launched from time to time. For latest Keypad compability, please contact our support team.
*NOTE: The distances provided are for reference only and will vary based on actual operating conditions such as physical obstacles and interference from other electronic devices. 18 Audio and LED Indications Actions Indications Bluetooth Connection LED Indicator flashes Blue Incorrect PIN Code 4 short beeps and flash Red LED 2 times Successfully unlock/
lock all paired locks Unsuccessful unlock/lock of all paired locks / Error Security Lockout Alarm Security Lockout Deactivated Low Battery Alert Ascending 4 fast tones and flash Green LED 2 times Descending 4 short tones and solid Red LED for 4 seconds Low-high siren for 30 /60 / 90 seconds 2 long beeps When Keypad is woken up:
If battery is below 20% -
2 sets of 2 short beeps with pulsing Red LED If battery is below 10% -
4 sets of 2 short beeps with pulsing Red LED Hard Reset / Unpair Descending 3 slow tones Successful Pairing Ascending 3 fast tones 19 Troubleshoot Paired locks are not unlocking when valid PIN Code is used Check that the locks you are unlocking are linked to the Keypad in the app. Ensure Keypad is within Bluetooth range of the locks with minimal obstruction between devices. Check battery levels of the locks you are unlocking. 20 Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. 21 For enquiries go to:
igloohome.co/support 22