FCC ID: FHO-L2112 4m RGBW Flex Lighting Strip

ORMANS 1 English 1. Wipe the surface dry where the tape will be used with a clean and dry cloth. 2. The assembly tape is permanent and is not intended to be removed. You might damage the surface under the lamp if you try to remove the tape. 3. Please keep the unused fittings for future use. English WARNING Deviation from the assembly instructions may result in a risk of fire or electric shock. English Only for use with LED driver with Class 2 output or Class 2 Power supply or Limited Power Source (LPS): rated 24 VDC, max. 3A, max. 15W. English IMPORTANT SAFETY INSTRUCTIONS For indoor use only. Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used. Important information! Keep these instructions for future use. CAUTION!

The light source of this product is non-

changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. Do not immerse in water. Cleaning Use a damp cloth, never a strong cleaning agent. 2 AA-2364565-1 English This device complies with Part 15 of the FCC Rules/Innovation Science and Economic Development Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. WARNING:

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the quipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. SAVE THESE INSTRUCTIONS 3 Franais 1. Bien scher la surface o le ruban adhsif va tre utilis laide dun chiffon propre et sec. 2. Le ruban de montage est permanent et ne doit pas tre retir. Dcoller le ruban adhsif risque d'abmer le dessous de la lampe. 3. Conserver les fixations inutilises pour un usage ultrieur. Franais ATTENTION Tout cart par rapport aux instructions d'assemblage peut entraner un risque d'incendie ou de choc lectrique. Franais utiliser uniquement avec un botier d'alimentation (driver) LED, sortie classe 2 ou alimentation classe 2 ou source d'alimentation limite (LPS) :

niveau 24 VDC, max. 3A, max. 15W. Franais CONSIGNES DE SCURIT IMPORTANTES Uniquement pour une utilisation en intrieur. Vrifier rgulirement que le cble, le transformateur et les autres parties ne sont pas endommags. Si l'une de ces pices est endommage, ne pas utiliser le produit. Information importante. Conserver la notice pour tout utilisation ultrieure. MISE EN GARDE La source lumineuse du produit est compose de diodes (LED) qui ne se remplacent pas. Ne jamais dmonter le produit, les diodes peuvent causer des blessures aux yeux. Ne jamais immerger dans de l'eau. Entretien Nettoyer laide dun chiffon humide, viter les dtergents puissants. 4 AA-2364565-1 Franais Cet appareil est conforme larticle 15 du rglement de la FCC, ainsi quaux normes dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Son fonctionnement est autoris aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage, (2) lappareil doit accepter tout brouillage radiolectrique subi, mme si cela est susceptible de compromettre son fonctionnement. ATTENTION:

Tout changement ou modification apports cet appareil sans approbation expresse de la partie responsable de la conformit peut rendre nulle la capacit de lutilisateur utiliser cet appareil. REMARQUE:

Cet appareil a t test et il est conforme aux exigences relatives aux appareils lectroniques de classe B, selon la section 15 des rgles de la FCC (Commission fdrale des communications). Ces exigences sont prvues pour fournir une protection raisonnable contre les interfrences nuisibles dans le cas dune installation domestique. Cet appareil gnre, utilise et peut mettre de lnergie sous forme de frquences radio. Si lappareil nest pas install ou utilis conformment aux instructions, il peut provoquer des interfrences perturbant les communications radio. Il est cependant impossible de garantir labsence totale dinterfrences dune installation donne. Si cet appareil produit des interfrences nuisibles la rception radio/tlvision, ce qui peut-tre dtermin en mettant successivement lappareil sous tension et hors tension, nous conseillons lutilisateur dessayer de remdier ce problme en suivant lune des procdures suivantes:

- Rorienter ou dplacer lantenne de rception.

- Augmenter la distance entre lappareil et le rcepteur.

- Brancher lappareil une prise place sur un circuit diffrent de celui auquel le rcepteur est raccord.

- Contacter votre revendeur ou tout technicien radio/TV qualifi pour obtenir de laide. CONSERVER CES MESURES DE SCURIT 5 Espaol INSTRUCCIONES IMPORTANTES DE SEGURIDAD Slo para uso en interiores. Comprobar el cable, el transformador y los dems componentes con regularidad para cerciorarte de que no se hayan daado. Si el producto tiene algn componente daado, no se debe usar. Informacin importante! Guardar estas instrucciones para su uso futuro. Espaol 1. Secar bien la superficie donde se vaya a utilizar la cinta adhesiva con ayuda de un pao limpio y seco. 2. La cinta de montaje es permanente y no se debe retirar. Se puede daar la superficie bajo la lmpara, al intentar despegar la cinta. 3. Conservar las fijaciones que no se hayan utilizado para un uso posterior. Espaol ADVERTENCIA No seguir las instrucciones de montaje puede resultar en incendio o descarga elctrica. Espaol Utilizar nicamente con el driver LED con salida de clase 2 o con alimentacin de clase 2 o con alimentacin limitada (LPS): valor nominal 24V CC, mx. 3A, mx. 15W. ADVERTENCIA!

La fuente de luz de este producto se compone de diodos luminosos (LED) que no pueden reemplazarse. Este producto no se debe desmontar, ya que los diodos luminosos pueden cuasar daos a los ojos. No se debe sumergir en agua. Limpieza Utiliza un pao hmedo. Evita utilizar detergentes fuertes. 6 AA-2364565-1 Espaol Este aparato es conforme al artculo 15 del reglamento de la FCC, as como a las normas de Innovacin, Ciencia y Desarrollo econmico de Canad aplicables a los aparatos de radio exentos de licencia. Su funcionamiento est sujeto a las dos condiciones siguientes:

(1) El aparato no debe producir interferencias dainas y (2) el aparato debe aceptar cualquier interferencia que reciba, incluidas las que puedan determinar el funcionamiento no deseado del mismo. ATENCIN:

Cualquier cambio o modificacin que se realice en este aparato sin la aprobacin expresa de la parte responsable de la conformidad puede anular la capacidad del usuario para utilizar el aparato. NOTA:

Este equipo ha sido probado para comprobar que cumple los lmites establecidos en los dispositivos digitales de Clase B, segn el apartado 15 del reglamento FCC. Estos lmites se han establecido para proporcionar una proteccin razonable contra las interferencias perjudiciales en una instalacin domstica. Este equipo genera, usa e irradia energa de radiofrecuencia, y si no se instala y se usa de acuerdo con las instrucciones, puede causar interferencias perjudiciales en las comunicaciones por radio. Sin embargo no existe garanta de que no se produzcan interferencias en una instalacin en concreto. Si el equipo produjera interferencias perjudiciales en la recepcin de radio o TV, lo que se puede comprobar encendiendo y apagando el equipo, recomendamos al usuario que intente corregir dichas interferencias adoptando una o ms de las siguientes medidas:

- Reorientar o recolocar la antena receptora.

- Aumentar la distancia entre el equipo y el receptor.

- Conectar el equipo a un enchufe o circuito distinto al que est conectado el receptor.

- Solicitar ayuda al vendedor o a un tcnico cualificado de radio/TV. GUARDA ESTAS INSTRUCCIONES 7 5x 1x 1x 5x 8 AA-2364565-1 English The light strip can be cut at the marks. Make sure that the device is unpluged when you cut. Franais La baguette lumineuse peut tre coupe au niveau des marques. Assurez-vous que le dispositif est dbranch avant de couper. Espaol La tira luminosa se puede cortar en las marcas. Asegrate de que est desenchufada cuando la cortes. 9 1 2 10 AA-2364565-1 3 11 5x Reset 5x 4 12 AA-2364565-1 5 Reset max 5 cm

(max 2")

> 10 sec. 13 14 AA-2364565-1 15 Reset

> 10 sec. 16 Inter IKEA Systems B.V. 2022 2022-11-01 AA-2364565-1

Positive a Back Control bos for Lamp Type 12112 Type No.12112 ORMANAS 7 py 4VDC_5W aS IKEA of Sweden AB 5-242 01 Almhutt Type No.L2112 ORMANAS complies with Port Type e212 ORMANAS This, plies with Par 15 ofthe FCC|

mS PR amin itefeeneeand tae

= device must accept any interference SS) OP AD Sie sing introns et may Conforms toiUl Std 2308

(Corafed toiCSA Sta. 22.2 N0.9.0 CAN ICE-005(8)/NMB-005(8) couse undesired operation ofthe device. Foc IDsFHO-L2112 AND IC:51234-MGM210L. CONTAINS Fc 1D:QoQGMa10L Placement of TYA - label x

Date: 2022-09-19 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The IKEA of Sweden AB, the undersigned, hereby authorizes Ms. Jessie Xu of TV Rheinland Shanghai Co., Ltd, to act on the behalf of the IKEA of Sweden AB solely in matters relating to the application for an FCC equipment authorization for FHO-L2112 including the signing of documents in connection with this Application. Necessary acts carried out by Ms. Jessie Xu of TV Rheinland Shanghai Co., Ltd. on our behalf of the IKEA of Sweden AB in connection with the Application shall have the same effect as acts of the IKEA of Sweden AB. The IKEA of Sweden AB also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Yours Sincerely, Name : Ivan Susak TitleProduct Engineering Manager CompanyIKEA of Sweden AB

Date: 2022-09-19 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID: FHO-L2112 To whom it may concern:

Permanent Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:

Block Diagram Schematics Part List Short-term Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold from public review for a period of 180 days from the date of the Grant of equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization:

Test setup photos External photos Internal photos Users Manual Rationale for request for confidentiality:

IKEA of Sweden AB has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality:

Disclosure of the permanently confidential portions of the application to competitors would not only give them significant competitive advantages in develop similar products, but would also disclose successful implementation of term unpublished, confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. technology developed by us.]

leading edge

[Short Sincerely, _____________________ Name Ivan Susak Title Product Engineering Manager IKEA of Sweden AB E-mail Ivan.susak@inter.ikea.com Telephone number +46 476 64 85 00